"old" website is viewed after uploading new files

I cannot figure this out, but my iWeb says (over and over and over) that it is correctly uploading updated files to my host but apparently not. If I go to my own URL to view it only the old site shows up. I have moved the folder where the site is located to the desktop and even temporarily trashed the "old" files and yet only the old pages show up. Any ideas?

Which version of Firefox are you using? It may be how Firefox manages color. You could try this FF add-on: Color Management :: Firefox Add-ons.
Or use web-safe colors as discussed on this site: http://www.iwebformusicians.com/WebMusic/FontsandColors.html.
OT

Similar Messages

Code doesn't update when uploading new files to website.

code doesn't update when uploading new files to website. I was using an old DW version for a long time then forced to upgrade when I bought my MacBook Pro. Now when I make changes to my pages and link to new files etc on my harddrive, when i upload the pages it won't image because the code still points to harddrive (this did not used to be a problem)... I manually changed the code on the web host site to point to the site and it loaded fine. But now my files on my harddrive also point to the web host files and now don't image on my computer. I never had to worry about this so far and wonder if the new version has a setting I'm supposed to be aware of so that I can design on my hardrive and upload and it knows that the files are being uploaded with it? Ugh hpe this makes sense - I'm NOT a webs designer and the new DW is way more than I use in it's technology.

Hi
This sounds like you have not defined your site in the site definition.
Follow the steps in these 2 tutorials to set-up your site locally and for the remote server -
http://www.adobe.com/devnet/dreamweaver/articles/first_website_pt1.html
http://www.adobe.com/devnet/dreamweaver/articles/first_website_pt6.html
PZ

IWeb's built in ftp client won't upload new files

iWeb's built in ftp client is mad at me, refusing to upload new files. No doubt because last Sunday I asked GoDaddy to change my domain name (same site, name changed). They did. Immediately nothing would upload. GoDaddy said "Well some FTPs are picky." Problems continued so I said OK, please change the domain name back to its previous name, and all would be put right again. I thought.
No so. iWeb's ftp client seems still offended for having been disturbed. I make a change. Save. Click Publish Site Changes. Get the window saying Content Rights. Click Continue. The blue line scrolls nicely, "Publishing will continue in the background" shows, then **"Your site has been published"**...
...but no changes or files have been uploaded. The old page is the same.
Looks like I permanently po'd iWeb’s ftp. Should I give up and rebuild my site in a new folder? Try Fetch?
I shouldn't have done that stupid thing last Sunday. Live and learn.
Help?

The root folder on the server is the top level one that you upload your files to.
You publish your website files to a local folder on your Mac. This produces an index.html file and a folder with the same name as your site in iWeb.
An FTP application transfers the files on your Mac to the root folder on the server using File Transfer Protocol.
Unlike Cyberduck, most shareware FTP applications will show both the files on your Mac and those on the server in the same window so its just a question of browsing to the folder containing your website files on your Mac and dragging them across to the icon of the root folder on your server. The application will take care of the rest.
The process really is just about as simple as dragging files from one folder on your Mac to another as long as you have the FTP application set up correctly.

I'd like to wipe out my current LR of all photos and re upload new files. How do I go about this?

I'd like to wipe out my current LR of all photos and re upload new files. How do I go about this?

Option 1. Create a new catalog.
Option 2. Select all images, hit the delete key and choose Remove. Then select Import.

MOH not working on specific phone number after uploading new MOH file

We have Cisco Unified CM Administration version 8.0.3.20000-2.
Our college has a global MOH (music on hold) file (MOH_040208) that plays for everyone. I was trying to figure out how to upload a different music file (MOH_101311) to see if I could get that MOH file to play only on my phone number (extension). I uploaded a file via Cisco Unified CM Administration>Media Resources>MOH Audio File Management. The upload appeared to be successful (no errors). Then, I went to Media Resources>Music On Hold Server Audio Sources and assigned the next available stream number (#3) to this newly uploaded MOH file.
Next, I went to Device>selected my device name>selected Line #1 and changed the User Hold MOH Audio Source and Network Hold MOH Audio Source from <None> to the newly uplodaded file, MOH_101311. I saved and applied config. During testing, I found that when my line puts anyone on hold, all they hear is silence. However, the college's global music on hold plays for everyone else. On my line, I removed the selection from User Hold MOH Audio Source and Network Hold MOH Audio Source, which put it back to its default of <None>. I deleted the MOH_101311 file from the phone system by removing it from the following two locations: Cisco Unified CM Administration>Media Resources>MOH Audio File Management and Media Resources>Music On Hold Server Audio Sources. However, my line will still not play music when I put someone on hold; then caller only hears silence. I rebooted my phone by unplugging it and plugging it back in, but this did not resolve the issue.
Did I do something incorrectly when trying to get a new MOH file to play on a specific phone number/extension? If so, can someone tell me the correct steps?
Any suggestions on how to make my phone number/extension go back to the way it was and play the college's default MOH file?
Thanks,
Angie

Try resetting it: hold on/off and home buttons simultaneously 10-15 seconds until you see the Apple logo (ignoring the red off slider which appears first), release and wait for the phone to restart.

Can't see design view after changing connections file from localhost to a remote host & back again

I was using localhost to test files before changing the connections document over to a remote host, since I couldn't get dreamweaver to connect to the remote host, I changed back to localhot. My files are all .php files. This is a dynamic site. After I changed my connection back to my local host my design view no longer works. It's competly grey with 3 small icons at the top on the left. I can view in live view and I can view in the browser. But no longer in design view after being able to for 6 months. The 3 icons are a hard drive case, a document, and a link symbol . When I click in code view the design view turns grey when I click in design view it turns white. I am using wamp for the localhost, Windows XP home, Dreamweaver CS5. Can someone please tell me how to go back to design view. This happens with any & all files including non dynamic .html files. Also having a problem connecting to my remote host. using godaddy, and they have tried with me for 2 hours to connect, I just keep getting password is incorrect. Thank you for any help, Stacey

I would also recommend clearing the Site cache, which may help with the connection failure. To do so, choose Site > Advanced > Recreate Site Cache.
After doing so, be sure to go back into your Site Setup, and make sure the FTP address, user name, and password are all correct. (Click the Test button in there to verify.)
If that doesn't help with getting connected to your server, you might try an alternate FTP client (e.g. FileZilla) to just make sure you are entering the right connection information. It could be that GoDaddy is having some issue, or maybe you just mistyped something (I know I do this often when I type too fast).
As for the issue with Design View, try clearing the Dreamweaver cache. Instructions are here: http://forums.adobe.com/thread/494811
You might also try toggling the location of Design View. That is, when in Split View, choose View > Design View On Left. Then, choose that menu option again to reset the location back to the right.
Resetting the workspace might also be recommended. Window > Worksapce Layout > Reset 'name of current workspace'

JDev 10.1.2 [UIX]: After uploading a file, how to forward to next page?

Hello guys,
I've got a DataPage to upload a file, I followed the example in JDeveloper's help (Using a Controller in ADF UIX -> Uploading Files Using the UIX Servlet). The files are uploaded fine. But I can't figure out how to forward to the next page (or struts action) to process the file, after uploading it just returns to the upload page. Can anyone give me a hint?
Thanks.
Fer.

Dear sir...
i faced the same problem before, and yet no one helped me, however there is a workaround, though i do not think it should be done. however the steps are as follows:
1- go to the code of the page.
2- override the processupdatemodel method, adding only this line:
actionContext.setActionForward("nextpage");
3- draw a forward from the upload page into the next page.
i hope this would help solving your problem.
please if you find a better solution, post it here.
good luck.

Uploading new files to iTunes U suddenly not working

One of the instructors I support has been uploading mp3 files to iTunes U all semester. Suddenly, he can't upload. He starts it, and it says it is finished, but the Upload progress bar never goes away and his new file is never added to the list of files. I can upload just fine to his shell from my machine. We are using the same version of iTunes (7.6.0.29). What can I do to help him?

Same prof had the same problem, so I went over to his office this morning. He stepped through the process, opened it in Audacity, saved it as an Audacity project, and exported it to MP3. During upload, it still reached the end showing the filesize uploaded and the total filesize and hung there without finishing. Like your experience, it has worked in the past. I showed him how to drag the WAV file into iTunes and convert it to MP3, edit the metadata in Info and upload that file. That worked like a charm. At this point, I'm recommending going through iTunes if there's no editing. But the question remains, why is this happening?

Cant get music on my Iphone 4GS after uploading new Itunes software. When I click on On This Phone there is no Add to Button. Nothing wrong with computer or itunes as it works when my Ipod is connected.

Have uploaded new Itunes software on to my new laptop. When connecting my Iphone 4GS there is no button to add music. It seems to work when I connect my Ipod.
Any ideas? Assume there must be something I need to do to my phone.

Thanks for the help. The problem just started suddenly. The problem I have is the closest Apple Store is 3 hours away so I would have to send it in and I don't want to send it to them and then be told I'd have to pay for it. Would they just send the phone back if you decide not to have it fixed. I will probably just get used to it or maybe it will fix itself one day.

HT4972 I have lost photos after uploading new software, restoring took several attempts as error kept coming up , can retrieve my files

I upgraded to latest software iOS 5.11 and after following instructions and several attempts at restoring I restored but lost some photos.
These are not on the computer in sync (hard to check as computer cannot open ithmb files).
Is there a straight forward way to retrieve.
Starting to hate the iPad and will probably try the new Microsoft tablet as that will be easier to function with other devices

These are not on the computer in sync (hard to check as computer cannot open ithmb files).
Is there a straight forward way to retrieve.
You can view content of your iPod Photo Cache folder with iThmb Converter.

TS3682 how do you restore your old ipod file after restoring new file?

how do your restore your old ipod back onto your ipod file after acidently losing your new ipod file

i mean that i got a new ipod 5 generation but then since my ipod forth generation was still on itunes, i accidently replaced all the info from my 5 generation and replaced it with the info from my fourth generation by clicking restore backup

My iTunes is now saying cannot find file after uploading new iTunes update

After downloading the new iTunes update my iTunes is now saying it cannot find my music files???

Greetings terrorbitejg,
If your iTunes application is having difficulties finding your music, I would suggest that you troubleshoot using the steps in this article -
iTunes: Finding lost media and downloads - Apple Support
Thanks for using Apple Support Communities.
Be well,
Brett L

Runtime error after uploading .par file

Hello experts,
I have a new problem with uploading the new .par file.
I have done following:
1. Download the .par file.
2. Import the par file to the NWDS
3. Import the private/lib folder structure manualy
3. Export the par file
4. Upload the par file(Systemadministration->Support->Portal Runtime->Administration Console
I haven`t modified anything at the par file. (Just for testing). I haven´t generate or build anything in the NWDS.
But after the sucessfull Upload I get a Portal Runtime Error in the Header Area with following ID:
Exception id: 10:04_10/09/08_5794550
Hope you can help me.
Thanks
Marco

hi,
With regard to your problem:
First of all the PAR might be uploaded properly.
Next you can look into the default trace log with the ID mentioned by you such that we can exactly figure out the problem.
try uploading your PAR files by using the following URL
http://<hostname>:<port number>/irj/servlet/prt/portal/prtroot/PortalAnywhere
Thank and regards,
Kris

Error on viewing an uploaded Xdo file of a converted XML report

1. Report converted from XML to BI publisher following the steps mentioned in the Oracle® Business Intelligence New Features Guide
Release 10.1.3.4.1
2. Uploaded the generated xdo file from the BI publisher screen "Upload a Report" option
3. The upload is successful. But when the report is clicked for viewing, it displays the error
"The report cannot be rendered because of an error, please contact the administrator"
"oracle.apps.xdo.dataengine.Parameter.getParameterDataType()I"
4. I set the debug level in the System Maintenance -> Server Configuration-> debug level option of the Admin Tab and bounced the OC4J
5. The following error displayed in the OC4J start screen
[030310_033043195][][STATEMENT] Setting JDBC Connections..
[030310_033043632][][EXCEPTION] java.lang.NoSuchMethodError: oracle.apps.xdo.dat
aengine.Parameter.getParameterDataType()I
Could someone help me out?
Thanks
Subu

Hello Tim / Experts,
Running EBS report in BI publisher
Followed the steps mentioned in the Standard Oracle docs/guides:
1.     Change the output format of the report in concurrent program definition to produce XML output
2.     Create the Data Definition by registering the concurrent program shortname in the Data definition of BI publisher
3.     Create RTF template
4.     Upload RTF template into the template manager of BI publisher to display the output from the concurrent request.
The step3 to create the RTF template has not been given much coverage in any of the oracle docs/guides
The requirement is for the RTF to have the same layout as the original rdf so that it displays the output in the same fashion. In order to produce the rtf file followed the steps below:
Converting Reports from Oracle Reports to Oracle BI Publisher
1.     Saved the 6i RDF report in 10g report builder
2.     From the Tools menu and File conversion sub-menu, converted the report in XML format
3.     Ran the conversion script, with the input file as the XML file saved above
java.exe -classpath ……………………\xdocore.jar; ……………………\collections.jar; ……………………\aolj.jar; ……………………\xmlparserv2-904.jar oracle.apps.xdo.rdfparser.BIPBatchConversion -source ……………………\input -target ……………………\output -debug
4.     The conversion script above produced the following outputs:
•     Report definition file REPORT.xdo
•     DataTemplate REPORT_template.xml
•     PL/SQL package specification REPORTS.pls
•     PL/SQL package REPORTB.pls
•     RTF Layout Template REPORT.rtf
•     Log file REPORT.log
5.     The RTF Layout Template REPORT.rtf had field orientation changed from horizontal to vertical i.e. the fields in the original report were in one straight horizontal line, whereas the converted report output rtf had all these fields arranged in a vertical fashion
6.     Compiled the packages into database
7.     Uploaded the REPORT.rtf of steps 5 into the template manager of BI publisher
8.     Ran the concurrent request
The report failed with warnings, not surprising since the layout was disoriented
Queries:
1)     Which is the easiest method of producing the RTF template (that has an identical layout of the rdf report) ? Any document which explains all this ?
2)     Steps to create the RTF template
3)     To attach format triggers and other things which are not supported by conversion tool ?
Thanks
Anupam

Not able to view the uploaded PAR file in the portal archive selection.

Dear All,
I have modified com.sap.portal.runtime.logon.par and have renamed it to some other name.
Now I have uploaded the par file.
The problem is that when choose new from PAR option (to create iview from a par file),I am not able to see the par file in the Portal Archive selection.
I also want to know that if I am able to call the par file in the iview, can I use this iview to have a portal login.
Our requirement is that we want to give login page for the portal in the portal home page.The portal home page will be for the anonymous users.
Kindly try to guide me

Hi Nitin,
Check ur Portalapp.xml file. If u have the following code in that just <b>remove</b> them
<property name="com.sap.portal.pcm.Category" value="platform">
<property name="inheritance" value="final"/>
Deploy it again.now u can see that par in ur portal.Refer this thread also
PAR File not seen
Regards,
Tamil K

"old" website is viewed after uploading new files

Similar Messages

Maybe you are looking for