Older Airport Express How to use as wireless to Wired.

I am running a Belking Wireless as my main. I can set up the AE to Join exsisting network but I dont have the option to allow ethernet clients. I want to hook my DVR wired to my AE to allow it internet access. Is there any way. Has V6.3 firmware.

If I buy the newer AX will it be possible?
If the Belkin supports ProxySTA then you could configure this newer AX to be a wireless client and use it's Ethernet port.
Otherwise you could connect one AX to the Belkin via Ethernet and configure it to act as a WDS main base station and the other AX to act as a WDS remote base station.

Similar Messages

Old Airport Express how to use with my Yosemite mac computer?

old AirPort Utility 5.6.is not working with yosemite
i can't use anymore with my old apple airport express? i can;t configure ...
is there is

Yosemite, and other recent operating systems do not support the older AirPorts.
Listed in order of preference with the third option not recommended for most users, and the fourth option not recommended at all.
1) Use...or borrow for a few minutes....a Mac running Leopard (10.5.x), Snow Leopard (10.6.x) or a PC with AirPort Utility installed on the device.
2) Replace the 8+ year old AirPort Express with a new version
3) Use Boot Camp on your Mac to install Windows, then download and install AirPort Utility for Windows.
4) Download unsupported software from the Internet from an unknown source, which requires that you change default security settings on your Mac.

Airport express - how to use with Comcast

I have Airport Express - and a ethernet cable. But I use Comcast and the box does not have a spare ethernet connection. Now what?

have a spare
There should definitely be one Ethernet port on the back of the Comcast modem. You need to connect the cable from the modem to your AirPort Express.

AirPort Express (2nd gen), share internet wireless and wired in the same time

If I use my AirPort Express (2nd gen) and I connect the modem in WAN port, and a switch in the LAN port (this swich connect a computer and a NAS wired), can I share the internet wireless and via LAN and the same time?, the wireless devices and the wired devices would be in the same network?.
Thanks.

Thanks!

How can I set up an older airport express using the newest airport utilities?

How can I set up an older airport express using the newest airport utilities? Seems like there isn't an option to set this up. Normally you could add/set up this in the airport setup assistant- but that doesn't exsist any longer.
Thanks for any suggestions

How can I set up an older airport express using the newest airport utilities?
Unfortunately you can't, since Apple dropped support of the older AirPorts with AirPort Utility 6.x.
Using some workarounds....not supported by Apple.....you might be able to download and install an older version of AirPort Utility that would allow you to administer the older AirPort.
See this thread for more details and instructions:
https://discussions.apple.com/message/21397085#21397085

I can't add an older airport express to OS 10.7.5? Want to use for wireless printing and iTunes.

I'm using an Airport Extreme model A 1301 for my home's wireless network. I have three of the older Airport Express model A1084, which I was using for remote speakers for iTunes and for a wireless printer set up, but discontinued using them at some point. I currently have OS 10.7.5, and I could have sworn I was using that OS the last time I used the A1084s, but maybe I updated to it afterwards, I can't remember. At any rate, I've plugged one of the units in, look for it in Airport Utility, and get a message "this version of airPort Utility doesn't support this base station. Use airPort Utility 5.6 to configure or manage this base station. AirPort Utility 5.6 is available at AirPort Service and Support." I go there, download the program, install it, and get a message "The installation failed. The installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance." Am I in a catch-22 here - am I not able to use the older A1084s because I need airPort Utility 5.6, but I can't use airPort Utility 5.6 because I have OS 10.7.5? Does this mean I may as well throw these older A1084s away?

If you have not already done so, I suggest that your start over on the AirPort Expess "from scratch" by performing a Factory Default Reset and then attempt to configure it to join the network again.
Resetting an AirPort Base Station or Time Capsule FAQ
If you have an older Express, make sure that you are not trying to configure it to connect to the 5 GHz network, as it is unable to do so.
Assuming that the name of the wireless network, wireless security setting and password on the Express match up with the AirPort Extreme, the Express should "join" the network if it is working correctly.
If you are still having problems, all that you really can do is try the default reset a few more times. If still no luck, the Express....which is at least 5-6 years old or older, may likely need to be replaced with a new model.

HT4259 Q: Can I use an older Airport Express-g router (not -n) to extend my Airport Extreme-n wireless network? If Yes, are the instructions the same as for adding an Airport Express-n router?

Q: Can I use my older Airport Express-g router (not -n) to extend my Airport Extreme-n wireless network? If Yes, Are the instructions the same as for adding an Airport Express-n router?

If you want to extend, using wireless only, the 802.11g Express doesn't support this.
However, if you want to use bridge mode over Ethernet or Powerline adapters then this is supported.

How do I re-configure an old airport express to be used to stream music wirelessly to my receiver?

I am trying to reconfigure an old airport express to stream music to my stereo. I plugged it in and reset it using the button on the AE. Upon restart I renamed it and created a new wi-fi network. It connected to my existing wireless signal and had the green light on the AE illuminated. After turning selecting a song to play off my iPhone 5S there wasn't any option the select the network I created. Any ideas?

I plugged it in and reset it using the button on the AE.
Plugged into "what"? I take it that you mean that you plugged the AirPort Express into the Ethernet port on your router using an Ethernet cable, since that would be the only way that it could create a new network
I renamed it and created a new wi-fi network
You are telling us here that you created another different wireless network than your existing network, so you have two wireless networks now.
It connected to my existing wireless signal
The AirPort Express cannot do this if it is creating another network, as you say it is. Or, when you say "it", maybe you are referring to another device? In that case, please clarify on what "it" might be.
After turning selecting a song to play off my iPhone 5S there wasn't any option the select the network I created
You must first connect the iPhone to the new wireless network that you created, and enter the password to connect......before....you can go into iTunes and select a song to play.
Unless you really do need two wireless networks, it would make more sense to configure the AirPort Express to "join" your existing wireless network. Then, everything is on the same network. Did you consider that option?

How Do I Run Older AirPort Express Base Station with Yosemite

I am running Yosemite, Airport Utility 6.3.4, which doesn't see my older Air Port Express.
I also have an older Mac, running Snow Leopard, which does see it.
In other threads discussing this same issue, access to an older mac is proposed as a solution... but the level of detail doesn't go much beyond, "use a Mac running an older operating system / version of airport utility to reconfigure the Air Port Express."
How do I use the older version of the air port utility on one computer and ultimately get the newer computer with the newer version of the air port utility to see the Air Port Express? Step by step instructions would be much appreciated!

Once setup the airport express can be used by any wireless device. The actual OS or firmware it is running is irrelevant.
So simple.. set up the airport express in whatever role you want them.. I cannot give you details since you have not given any info on how you want to use them.
Once setup say to play music to a speaker.. the Mac will be able to find the device.. airport utility will see the device .. it is simply that Apple decided you cannot configure it.
If you want details, then we need full details of the network.. and how you intend to use the express.

Using the AirPort Express to Join an existing Wireless Network

Hello,
I am hoping you can provide me with some help on this... I recelty acquired a PowerMac G4 with a 450 MHz processor, CD-RW/DVD-ROM drive, Zip Drive, 1 GB RAM, and two 40 GB HD... The system has OS 10.4 installed, and it is has built-in Ethernet...
I was told I could use the Airport Express to connect to an existing wireless network, so I purchased an Airport Express base Station... Thing is, to e honest, I am having a bit of a problem getting started...
- First, to connect from the AirPort Express to my G4, do I need a special kind of Ethernet cable, or will the usual kind do?
- Second do I need to istall the software first, or have the Airport express connected to the G4 before I do?
How would I go about setting this up, step-by-step?
Any information would be appreciated...
Thanks for your time...

OK, thanks. Hopefully, the Netgear is creating a wireless network using WPA/WPA2 security. That will make it much easier for the AirPort Express (AX) to join the wireless network. It can join networks with using WEP security, but password issues almost always arise using WEP.
Since you must enter the exact security settings and password for the wireless network, it would help tremendously to know this in advance. Otherwise, it's going to be a series of "trial and errors" and likely frustration, later on.
When you have a moment, check the security settings on the Netgear router.
It might be one of the following: WPA2 Personal, WPA/WPA2 Personal, WEP 128, WEP 40.

Can I use the Airport Express to create a secure wireless network in a wireless-only hotel?

Can I use the Airport Express to log onto an unsecured hotel wireless network, without an ethernet cable, to create a secure wireless network for my MacbookAir, IPad, IPhone, etc.? If so, how is that done?

will the Airport Express allow you to log onto a hotel wireless network, and broadcast a secure wireless network in your room for your wireless devices, like the Ipad, Iphone, etc.?
The bottom line with a single AirPort Express is no.
The AirPort Express can only "extend" a wireless network when the network is being provided by another Apple router.
As you might imagine, it is extremely unlikely that that the hotel network....which no doubt uses professional wireless access points provided by a manufacturer of commercial systems.....would be compatible with an AirPort Express.
In many years of travel domestically and internationally, I cannot recall a time when a single AirPort Express would "extend" the signal provided by a hotel's wireless network.
However, if you had two AirPort Express devices handy, you might be able to configure one to "join" the hotel network and provide an Ethernet signal to the second AirPort Express, which would be configured to "create" your own "private" wireless network.

Use Airport Express G to set up wireless printing on a N network?

I currently have a N network set up, with a First Gen Airport Extreme acting as the main hub, and the latest Airport Express N used to extend the range of the network.
However, I would now like to set up a wireless printer in another part of the house, and I have a spare first gen Airport Express G lying around - Would it be possible to make use of this Airport Express G to add the wireless printer onto my N network?
I guess my question is, is the airport express G compatabile with my N network if I just use it for wireless printing? And if so, how do I go about setting it up?
Thanks for the help.

Hello again
I'm still having the same problem. I go through the step by step setup for wifi but when I get to step number 5 (HTMLConfig) instead of opening the next window it takes me back to the previous one.
The step by step instructions are here: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02847467&tmp_track_link=ot_faqs/top_issues/en_u...
I have also looked in the manual that came with the printer but it basically just says "follow the on screen instructions for setup when you install the CD" which I have already done.
All my software is up to date. I have OS Mavericks and there are no updates pending.
My printer is not compatible with Airprint so I cannot use that option. I did not use the WPS method as you instructed. I opted for Method 3: Wireless setup using a USB connection.

Can I use airport express to create a local wireless network that my apple tv can connect to for AirPlay/mirroring in student halls/dorm without Internet connection

Hi I was wondering :
Would I be able to make a local wireless network using airport express that my apple tv can connect to which in turn is connected to a projector with hdmi in so that I can mirror/AirPlay from iPhone pad and mac

will the Airport Express allow you to log onto a hotel wireless network, and broadcast a secure wireless network in your room for your wireless devices, like the Ipad, Iphone, etc.?
The bottom line with a single AirPort Express is no.
The AirPort Express can only "extend" a wireless network when the network is being provided by another Apple router.
As you might imagine, it is extremely unlikely that that the hotel network....which no doubt uses professional wireless access points provided by a manufacturer of commercial systems.....would be compatible with an AirPort Express.
In many years of travel domestically and internationally, I cannot recall a time when a single AirPort Express would "extend" the signal provided by a hotel's wireless network.
However, if you had two AirPort Express devices handy, you might be able to configure one to "join" the hotel network and provide an Ethernet signal to the second AirPort Express, which would be configured to "create" your own "private" wireless network.

HI, do you know how many airport express I can use per Mac????

I need to know how many airport express can I use simultanously in my Mac ... any idea???

Thanks for your question, I live in a 3 floor house, the cable router is in the 2nd floor, I already have one connected airport exrpess in the 1st one, but I need to increase the wifi signal in the 3rd one... so for that reason I would like to conecct one additoonal one to my wifi network...

How do I configure an older airport express with Yosemite?

I Have an older airport express and my computer will not recognize it in Airport Uitlity. I tried using an older Airport Utility (5.6) but it cannot be run on Yosemite

Please help!
I can't create a new thread
I am trying to get a A1264 to connect to a Macbook pro 2014 with yosemite.
- Airport Express A1264 (from 2008)
- MacBook Pro Retina mid-2014
- Last updates Yosemite blah blah
I usually use my old Imac as a wifi sender. It's running on a VPN, cable plugged directly in the wall.
Please explain step by step what I should do. For now, I plugged the Airport in the wall and plugged the Ethernet cable in it. It lights green (no flashing). But Airport Utility (the new one and the old one) doesn't detect it and I don't have an option to set a new Airport. There is "configure others" but then it asks for address and password.
Thanks

Older Airport Express How to use as wireless to Wired.

Similar Messages

Maybe you are looking for