Older airport extreme base station as a network extender with new time capsule

I just bought a new time capsule (802.11ac). Can my older airport extreme base station (model A1143) be used as a network extender with it?

Yes, although it maybe disappointing..
There are two kinds of extending.. wireless repeater type which is poorest as it has to transfer all packets in two steps instead of one.. hence will halve the speed.
Or using ethernet to the old extreme and set it in bridge.. You can then setup roaming network... this is much better.. but getting ethernet to the right place could be messy or expensive or both.
http://support.apple.com/kb/HT4260
wireless extend doco.. mind all of this is out of date.. the basics are correct.. the methods via the airport utility may be obsolete.
http://support.apple.com/kb/HT4145
Documentation has rather lagged lately.

Similar Messages

Airport Extreme Base Station as an wireless Extender to new Airport time capsule

After many months of time machine back up problems. (verify back up failing) I am considering biting the bullet and getting a new 2TB Airport extreme time capsule. Can I use the old (late 2013 801.11ac) airport extreme to extend wifi network?
A few other questions.
1.Does extending reduce wifi performance?
2. If using extreme as extender can I still plug in hard drive or hard drive to it?
3.
currently using imac 21.5 (late 2013) 1TB backing up to 6TB WD mybook live duo (connected to Extreme using ethernet), via airport extreme base station (ac wireless band to mac)
Any guidance appreciated.

Is it possible to quantify how much faster USB back up is compared to 802.11ac between mac and AirPort time capsule?
600GB should take 10 hours by ethernet. And it will be somewhat faster by USB3.. exactly how fast is difficult to predict as the first TM backup itself is slow due to many small files. In terms of raw speed maybe twice but it will depend on the disk used. USB you can use an SSD and get super huge speed. (not that I think you will be buying a 1TB SSD anytime soon).
In terms of raw speed it is cheese and chalk. The max speed of real world file transfer on AC wireless is around 430Mbps and that is using ideal world.
http://www.smallnetbuilder.com/lanwan/router-charts/bar/113-5-ghz-dn-c?see=MAX
This has nothing to do with link speed.. this is how fast a file actually transfers. And that is assuming the iMac and the TC are in the same room. And everything is perfect with nothing else using connection.
The real world speed of USB3 is around 100MB/s to a spinning hard disk..
http://www.macworld.com/article/2039427/how-fast-is-usb-3-0-really-.html
which may indicate the limit is the actual disk speed. In bits per second you x 8.. so the USB3 is 800Mbps. The advantage of USB direct connection is that speed is available at all time. Not when your close or the load on wireless is low.
Further to your comments when extending. Is it only the area covered by extending that has reduced performance or all the wifi signal?
The speed will depend on hops..
So if the computer is using resources on a local router.. and only one wireless hop then it is fast.
If it is using resources via a second router so wireless goes.. computer--- router2----router1-- resource.
Your speed drops 50% at best.. at worst it is really bad.
For example.. computer 1 on router 1 accesses computer 2 hard disk on router2 with everything wireless.
Count the hops. C1-R1, R1-R2, R2-C2
That gives 3 hops. So each packet is transmitted.. along that chain.. each transmission can only begin after it is received in full. Now add some other computers using resources.. say C3 is using internet via R1.. that has to be time sliced. So you get 50% of 50% of 50% of 50%. It is obvious that wireless networks have a huge handicap.. they cannot transmit and receive at the same time.. nor can they talk to more than one client at a time.. so add time slicing to wireless hopping.
Now ethernet is entirely different. It can transmit and receive at the same time.. ie is duplex. And in a switch it can talk to several computers at the same time. That is why we say.. as much as you can ethernet.. and use wireless as the last single hop to a client that needs it.. ie iphone or ipad.. or laptop if you cannot plug in ethernet.
Can the ac wifi format be extended using AirPort Extreme and time capsule.
Over very short range yes. AC wireless is only on 5ghz and is poor penetration of solids.. so this will work but maybe only to the next room.

Is my AirPort Extreme base station A1034 (802.11g) compatible with Comcast 50 Mbps internet service?

Is my AirPort Extreme base station A1034 (802.11g) compatible with Comcast 50 Mbps internet service?

The WAN port on the A1034 will handle up to a 100 Mbps Internet connection, so you are OK there.
Wireless on the A1034 is limited to 54 Mbps tops, so things should work OK as long as wireless devices can receive a strong wireless signal from the Apple router.

AirPort, older AirPort Extreme Base Station, AirPort Express, Newer AirPort Extreme Base Station

This may sound like a fairly dumb question, but here goes anyway:
I have a 27" iMac with the following AirPort Extreme card:
Card Type: AirPort Extreme (0x168C, 0x8F)
Firmware Version: Atheros 9280: 2.1.14.6
For a Base Station, I'm currently using a pretty long-in-the-tooth M8799LL/A AirPort Extreme Base Station (with modem and antenna port)
I recently bought an Airport Express:
AirPort Express MB321LL/A (A1264) to
A. Use AirTunes to send iTunes from my Man Cave on the first floor at one end of the house to the family room on the first floor at the other, where it will connect to an A/V setup, and, probably, one of my USB printers
B. Act as a repeater for the AirPort Extreme Base Station, which is physically closer to the Man Cave than to the family room. My wife and I use our ancient-but-hangin'-in-there iBook G4s in the family room (and upstairs) to check email, eBay, etc. Both in the family room and especially upstairs, we sometimes get only 2-3 bars on the AirPort signal strength indicator in the menu bar.
I see that I can get, from a well-known third-party retailer, an AirPort Extreme 802.11n A1143 (1st Generation), for an exceptionally reasonable price.
My question is, what would getting the AirPort Extreme 802.11n A1143 do for me, if anything? I know it would give me one more signal source in the repeater chain, and I could probably put the Auld Nyle M8799LL/A in the stairway or upstairs to boost the signal upstairs, and I could use the USB port in the AirPort Extreme A1143 for connecting another USB printer or USB external hard drive (would this drive be available to any Mac on the AirPort network?)
Any other configuration possibilities and suggestions greatly appreciated!
Peace & Love
Bart Brown

Thank you for the prompt reply and the very helpful links. I'm going through all the support docs right now, but from your explanation and what I've seen in the support docs so far, it would appear that the maximum bandwidth is achieved by a physically-connected "Roaming Network."
I'm so out of it, I'm afraid I'd never heard of "Powerline adapters," but I looked them up, and I guess this is the system that uses "Romex" - style standard house wiring to carry signal, which cuts down on each individual Base Station's power overhead (does it also affect bandwidth?).
I see a lot of names selling these adapters -- Western, D-Link, NETGEAR, ZyXEL, Monster, Sling Media, PowerNet, Cisco-Linksys, Actiontec, Medialink, Rosewill, TRENDnet -- and a lot of different configurations: 1 port, 2 ports, 4 ports. Basically I have one 27" iMac that doesn't go anywhere (it's not too portable!), a couple iBook G4s, and a point where I want to run 1/8" mini-jack-to-RCA L/R audio cable from the AirPort Express to an A/V receiver. I doubt this configuration is going to change, as I'm 63, and too lazy to lug stuff around if I don't have to. What do you think would be the best solution for me, considering I just ordered the AEBSn and I already have a brand-new AXn. Should the 27" iMac, since it ain't movin', be connected by ethernet/"Powerline adapter", rather than relying on the internal Airport Extreme card? I guess what I'm asking is, given what I want to do, how many of these Powerline adapters, what kind (do you recommend), with how many ethernet ports do I need?
Thank you again for your prompt and informed help.
Bart Brown

Using AirPort Extreme Base Station as a network AP

I have a Netgear N900 wireless router and and an Airport Extreme Base Station.I used my N900 to create a high speed wirelss network. I would like to use my Extreme Base Station as an access point on this network, in order to get AirPlay and some extra ethernet ports in another part of the house. Is this possible to do, and if so how?
The "extend your current network" option from the Wireless Mode menu does not work. There is no "join your current network" option, like on the Airport Express. What am I missing?
Thank you in advance,
Alex

The Extreme *does not* let you joint an existing network
Yes it does. Please open up AirPort Utility 5.6, select the Extreme and click Manual Setup
Click the Wireless tab below the row of icons
Hold down the option key on your Mac while you click on the Wireless Mode selection box.
What happens? Now you see the "Join" selection.
Problem is, only the USB port is enabled if you configure the Extreme to "join".......as I already stated. The Ethernet ports are not enabled.
The AirPort Express 802.11n has a special feature that allows it to "join a wireless network" and the Ethernet port can be enabled.
The AirPort Extreme does not have this feature.....which might be the reason why Apple hides the "Join" setting for the Extreme.

How do I open the same ports on an Airport Extreme Base Station for multiple computers at the same time?

As the title suggests...
I have a mix of five Mac and PC's at home using an Airport Extreme Base Station as the router.   I need many ports opened on the AEBS for all of the computers- not just one computer. (for example: three people want to play TF2 on Steam at the same time; each machine needs the correct ports open on the router).   Port forwarding only allows me to forward a given port to a single IP, yet I need that port open for five differnt IP's, all at the same time.
How do I do that on an AEBS?
In the same way, I have a small office of four iMacs using an old airport with the same exact issue.   I would like to be able to connect to all of them remotely with Apple Remote Desktop, but the port forwarding on the airport only allows a port to forward to a single IP.   I want to be able to tunnel into the office network and log onto any machine behind the Airport extreme... not just a single IP.    I currently have it set up where I can tunnel into the office from my house, I can find the one machine that the port forwarding has been assigned to, I can log on and everything is just fine... with one machine.    How do I open the firewall for the other machines?
TL,DR version: How do you open ports on an Airport Extreme Base Station instead of forwarding ports?   Forwarding ports doesn't work for multiple IP's.

You can open a single or multiple ports to a single device or different ports to different devices, but you cannot open the same port to multiple devices via the AirPort Utility for the Apple routers.

Airport Extreme base station no longer playing nice with Mac Pro

This is a strange problem...
I have an Airport Extreme base station (purchased in 2004) that I use with verizon DSL to get a wireless network going in my house, and I connect three computers wirelessly.
I have an ipod touch and toshiba PC laptop that are both able to connect to the network and run just fine. But lately (past 2 weeks or so) when I try to connect with my MacPro desktop I can go to a few sites, but after a few minutes the airport locks up. At that point none of my computers will connect and I have to unplug and then replug the airport. At that point the network will start up again and if I do not try to get on with Mac Pro then things run fine, but when I try to connect with desktop again, after another few minutes the same thing happens.
I know the problem is with the airport and my Mac Pro - I have done numerous connection experiments and have narrowed the problem down to that.
Is it possible that my MacPro might be drawing more power and causing the airport to overheat? (it is rather hot in the room with DSL connection)
Or should I accept that the current base it old, and bite the bullet and get a new base?
Any thoughts?

Could you post what you did in order to resolve the issue. I'm having a problem with the base station in that I cannot connect to the internet with my laptops (a mac and pc) while I can connect wirelessly to my network with my desktop (G4). The base station is not detected in the base statin admin utility or the aiport setup utility. If anyone else has a solution I would be much obliged to read it.
Thanks!

Older Airport Extreme Base Station and roku Player - NG

Hello
Have read many compatibility issues with roku and Apple Airport routers. And yes, I've read all the solutions, but they are complicated and not fool-proof especially considering the possible outdated band frequency and technology of this 7 year old Apple router, and 10.4.11.
My question: would it be a better bet, (fewer or no compatibility issues), to just spring for the extra $$$ and pick up an Apple TV Box?
OR
Will I still be facing the same compatibility issues?
Thank you
Mike

Hey BD
How are you my ole friend?
So then, this puts an end to our misery.
We would need to use another machine with 10.5, and possibly get a newer router, in order to set up a network for either roku or Apple Box TV?
Yes?
BTW - No One would reply to this question on the Apple TV thread - you are exemplary.
Thank you ....
Mike

I told my wireless network to forget two airport expresses so that I could rename them. Now the network does not see them even when plugged in about 10 feet away from the airport extreme base station. Does "forget" mean forever? How to reset?

I told my wireless network to forget two airport expresses 1 1st gen, 1 2nd gen so that I could rename them. Now the network does not see them even when plugged in about 10 feet away from the airport extreme base station. The network does recognize a totally new 2nd gen express. Does "forget" mean forever? How to reset?

The network does recognize a totally new 2nd gen express.
Then, it sounds like you have already reset the 2nd Gen Express, and now you need to set it up again, like you did the first time. Only, this time, assign the device name that you want to the AirPort Express.
Do NOT use the name that Apple suggests.....which will be something goofy like........Sueswimsf's Red Apple AirPort Express
Assign a simple name.....something like 2ndGenExpress

Can Airport Extreme Base Station 802.11g Connect To Park's Free WiFi?

The RV resort where I'm staying has free WiFi for Internet connections. It shows up on my iBook's Airport list of possible networks in the menu bar, along with my own local network which is an older Airport Extreme Base Station (white dome 802.11g) which has my HP printer plugged into it via an ethernet cable.
However, when I am connected to the park's WiFi via the laptop's Airport network choices, I am NOT connected to my AEBS, and therefore cannot print to the printer wirelesslessly. Is there a way for the AEBS to make the connection to the park's WiFi so I can use both Internet and printer from my iBook G4 without having to switch from one network to use the other?

Is there a way for the AEBS to make the connection to the park's WiFi so I can use both Internet and printer from my iBook G4 without having to switch from one network to use the other?
Sorry, but no. You cannot connect your iBook's AirPort to more than one wireless network at a time. Since it will be highly unlikely that you will be able to create a Wireless Distribution System (WDS) between your RV resort's Wi-Fi and the 802.11g AirPort Extreme Base Station (AEBS), you won't be able to extend it to meet your needs.

HT4259 Extending AirPort Extreme BASE STATION range

I am using an older (2006) 54Mbps AirPort Extreme Base Station and want to extend the range. I am experiencing issues with dropped or slow signals in rooms that I would consider tough to reach (basement for example). Can I use an AirPort Express to extend the range of the WI-FI and how exactly is this done? Or would I be better off updating the AirPort Extreme Base Station? It's worked flawlessly for 6 years, just have more wireless requirements.
Thank you all in advance.

I am using an older (2006) 54Mbps AirPort Extreme Base Station ... Can I use an AirPort Express to extend the range of the WI-FI and how exactly is this done?
The short answer is yes; the longer answer is that the only way to "wirelessly extend" the range of your 802.11b/g-only Extreme is to create a Wireless Distribution System (WDS).
Not only is a WDS a tedious pain to set up, even for experienced users, its performance is likely to be disappointing. It may not even solve your dropped signals or slow throughput.
There are better ways to extend your wireless range. By far the best and least expensive alternative is to connect an additional base station to your existing Extreme with an Ethernet cable. If you don't want to do that, and you understandably decide against a WDS, then your remaining alternative is to buy a newer, 802.11n capable Extreme or Express. They can use Apple's "extend a wireless network" feature that will eliminate nearly all the disadvantages of a WDS.
Read this to determine how to create a WDS: http://support.apple.com/kb/HT4262

Configure TC and Airport Extreme Base Stations with different channels

I had to do some serious workarounds to use the Airport Extreme Base Stations as an access point with the same wireless network name primarily due to channel overlap. I thought I would post my results here since I didnt' find a good article online.
Also, I found the Snow Leopard verison (5.4.2) of the Airport Setup Utility far superior to Lion's Airport Utility (6.x) in terms of advanced setup.
Setup is a 3 flloor house where the 3 wired network locations have wireless overlap. The problem was that the access points would not hand off the wireless signal because the channels for each airport/TC were automatically set to the same channel. In non-apple setups, this is how you force a wireless client to switch access points (since the wireless software on your client/mac/windows can detect which access point is stronger and moves to the alternate channel.
Using apple's "Extend this wireless network" option removes any ability to manually configure wireless channels. I am writing this from memory, so feel free to ask questions and I will track this topic:
Procedure
Setup time capsule as your base station. Do all the setup for your wireless and guest networks. Manually configure the network and change the wireless channel to a specific channel for a/b/g networks (e.g., 3) and n networks (e.g, 167).
Plug your first airport extreme/access point into your wired network. Do not plug it into the "internet" ethernet plug, use one of the 3 ethernet switch locations
Use the airport utility to first configure it to "extend" your wired network.
Then, go in and reconfigure it manually in the airport utility. Choose the option to setup a "new network" and name the network the same as the TC wireless network name, security, etc.
Change the channel from "auto" to a different channel than the TC (e.g., 6 and 137).
Now go to the top tab and click on the "internet" icon
Go to the DHCP tab and change it to "bridge mode." This will tell the AE to not give out IP addresses (the TC will do this for you). If you get an error that the IP ranges conflict, you have not done this
Note that if you have a guest network setup, you will need to set this up on the AE as well.
Now test your airport setup. Take your client (macbook, iOS device) and connect to your network. Move to a spot near the TC and pull up a web page. Keep an eye on the signal strength and beginv moving toward the AE. Refresh the page as you move around. You should at some point see the signal strength increase. Refresh your page again. You should be now connected to to the AE. I have found that Macbooks do a better job than iOS devices because you get an extra signal bar to measure strength, and they have larger antennas which allows you to better measure problems with handoff
Another test you can do is to start backing up on your TC and then test the move. The handoff will truly show you that the TC is handling the process but the AE is relaying to the TC for backup.
If you need to setup another AE, simply follow setups 3-10.
I hope this helps others. I've done this setup 100 times on Linksys devices and although they are cumbersome, they at least allow me to do this setup much more quickly and easily than the apple products.

I had to do some serious workarounds to use the Airport Extreme Base Stations as an access point with the same wireless network name primarily due to channel overlap. I thought I would post my results here since I didnt' find a good article online.
Also, I found the Snow Leopard verison (5.4.2) of the Airport Setup Utility far superior to Lion's Airport Utility (6.x) in terms of advanced setup.
Setup is a 3 flloor house where the 3 wired network locations have wireless overlap. The problem was that the access points would not hand off the wireless signal because the channels for each airport/TC were automatically set to the same channel. In non-apple setups, this is how you force a wireless client to switch access points (since the wireless software on your client/mac/windows can detect which access point is stronger and moves to the alternate channel.
Using apple's "Extend this wireless network" option removes any ability to manually configure wireless channels. I am writing this from memory, so feel free to ask questions and I will track this topic:
Procedure
Setup time capsule as your base station. Do all the setup for your wireless and guest networks. Manually configure the network and change the wireless channel to a specific channel for a/b/g networks (e.g., 3) and n networks (e.g, 167).
Plug your first airport extreme/access point into your wired network. Do not plug it into the "internet" ethernet plug, use one of the 3 ethernet switch locations
Use the airport utility to first configure it to "extend" your wired network.
Then, go in and reconfigure it manually in the airport utility. Choose the option to setup a "new network" and name the network the same as the TC wireless network name, security, etc.
Change the channel from "auto" to a different channel than the TC (e.g., 6 and 137).
Now go to the top tab and click on the "internet" icon
Go to the DHCP tab and change it to "bridge mode." This will tell the AE to not give out IP addresses (the TC will do this for you). If you get an error that the IP ranges conflict, you have not done this
Note that if you have a guest network setup, you will need to set this up on the AE as well.
Now test your airport setup. Take your client (macbook, iOS device) and connect to your network. Move to a spot near the TC and pull up a web page. Keep an eye on the signal strength and beginv moving toward the AE. Refresh the page as you move around. You should at some point see the signal strength increase. Refresh your page again. You should be now connected to to the AE. I have found that Macbooks do a better job than iOS devices because you get an extra signal bar to measure strength, and they have larger antennas which allows you to better measure problems with handoff
Another test you can do is to start backing up on your TC and then test the move. The handoff will truly show you that the TC is handling the process but the AE is relaying to the TC for backup.
If you need to setup another AE, simply follow setups 3-10.
I hope this helps others. I've done this setup 100 times on Linksys devices and although they are cumbersome, they at least allow me to do this setup much more quickly and easily than the apple products.

Airport Extreme Base Station and Win 2000

I have a new Airport Extreme Base Station. All is well with my Mac but my company laptop uses Windows 2000 Pro. The software that came with my AEBS will not install I get an error that I can not install as Win XP SP2 is required. Anyone got a work around or know where I can find compatable software?

All,
I recently posted what I believe to be a similar/identical issue. See my post here: http://discussions.apple.com/thread.jspa?threadID=1378849
I have not changed my AEBS to "Off (Bridge Mode)" yet, because everything currently 'works' but I continue to get the occasional "Double NAT" warning suggesting I switch the AEBS to bridge mode. When this happens, I lose connection to the internet and need to unplugged both the AEBS and my modem to re-establish a connection to the internet and the external HD I have connected to the AEBS.
My question for Jmiller1138, do you continue to get the "Double NAT" warning even when you changed your AEBS to "Off (Bridge Mode)"? I am hesitant to change my AEBS to bridge mode since I'm assuming I'll need to totally reconfigure my entire network (meaning both the AirPort Extremes, my wireless HP printer, and my firewalls on my PCs).
The ignoring of the warning (i.e. closing the AirPort Utility without updating the AEBS) is what triggers the need to reset my AEBS and modem. Not fun.
I guess I'll just need to bite the bullet and set the AEBS to bridge mode . . . yes?

About Apple AirPort Extreme Base Station?

I Need A Wireless Router & i'm looking for Apple AirPort Extreme Base Station cause I Need a Wireless Router cause I Have at Home a Sony DVD Wireless Blue-Ray Player & i'm trying to Connect to The Internet on The Device but it's not letting me cause it say's I Have No Wireless Router to Connect to or Something? but I Connected The Sony DVD Blue-Ray Player to My 15inch Coby L.E.D LEDTV1526 HDTV & it Play's Blue-Ray Movies Excellent it just I Cannot Connect to The Internet on there cause I Need a Wireless Router & I Wanted to know if Apple AirPort Extreme Base Station is The Right Wireless Router for Me? cause I Like Apple & I Would like to Get The Apple AirPort Extreme Base Station if it's ok with what I Need it for? I Never had a Wireless Router before, I Love Sony & I Love Apple they both have Great Products on My Sony DVD Wireless Blue-Ray Player I Can Stream Movies From The Internet & I Wanna do that let me know if Apple AirPort Extreme Base Station is ok for me Please?
in My Bed Room I Have My 15inch Coby L.E.D LEDTV1526 HDTV & I Have My Optimum Cable HDTV DVR Cable HDTV Ready Connected & My Sony DVD Blue-Ray Player Connected to My 15inch Coby L.E.D LEDTV1526 HDTV But I Need a Wireless Router & is Apple AirPort Extreme Base Station right for me? all I Need now is Apple TV Next then i'm really Loaded Up.
in My Home I Have Optimum Triple Play Package Deal, I Have Cable HDTV Silver Package with Optimum DVR & Optimum Online Boost Plus for Internet & I Have My Regular Optimum Phone Service all 3 from Cablevision in My Bed Room & I Have over 2000+ DVD Movies & Music CD's & on Apple iTunes I Have almost 1000 Music & Music Video's & Almost 1000 App's for My Apple iPhone 4 32GB & Future Apple iPod Touch 64GB & I Have 32 Movies on Apple iTunes & 4 TV Shows on Apple iTunes & I Have 70 Mac App Store Mac App's from The Mac App Store
& in My Bed Room I Have My 2009 Apple 24inch iMac Computer & My Canon PIXMA MP480 All-One Photo Printer & My Apple Mouse & Apple Keyboard & My G-Technology G-Drive 1TB Drive & My Canon Powershot A2100 IS Digital Camera & My Apple iPhone 4 32GB From Verizon Wireless Connected To My 2009 24inch Apple iMac Computer so I Have lots of things going on in my Room. so have a Very Merry Christmas & Happy Holiday's & Happy New Year
If Someone did not like the way I Made this Thread i'm Very Sorry I Did it in the wrong way, I'm Sorry & I Won't do it if it was the wrong way i did it? & i'm sorry I Made the Mistake & I Just thought i would get Help on the Apple AirPort Extreme Base Station I Needed help with & I'm Sorry what i did if You did not like it, I Have not been on here often & I Only come here if I Need help with something so maybe you could let this thread slide but if not? then it's ok & i'm still Sorry I Made it & I Did not mean to make it in a bad way if thats what you thought? so have a Very Merry Christmas & Happy New Year & Happy Holiday's from your Online Friend & Costumer Byron.
Peace.

Ok after Christmas was Over I Went to PC Richard & Son & was looking for an HDMI Cable & I Found it so then I Asked them about My Sony DVD Blu-Ray Player & told them about the situation that I can stream Movies from the Internet to The Sony DVD Blu-Ray Player & then I also talked to them about a Router so after that they had Showed me The BELKIN Share N300 Wireless N' Router & they said this is The Cheapest 1 & it was $29.99 plus tax, they said that I Can Connect that to My Sony DVD Blu-Ray Player to The BELKIN Share N300 Wireless N' Router & Connect The Belkin Share N300 Wireless N' Router to My Cable Optimum Online Modem then Connect The Wire from The Optimum Cable Modem to My Computer so now My Sony DVD Blu-Ray Player can Stream Movies from The Internet & also I Have everything Conected & working great & I also have Netflix on My Sony DVD Blu-Ray Player & I Can also watch Movies on Netflix on My 24inch iMac Computer to, everything is working fine so now 1 Very Last Question & i'll leave you alone
if I Were to Buy Apple TV Can I Get a Wireless Home Networking Connection on The BELKIN Share N300 Wireless N' Router? or is it only can Work on an Apple Airport Extreme Base Station?
I Hope you had a Happy New Year ok take care from Byron.

Purchase of new Airport Extreme Base station??

have i wasted money on purchase of NEW Airport Extreme base station? i have fios with actiontec router and tv service. the Guest network does not work nor does Actiontec have ability to provide guest network. I am about to return the AEBS as I dont see any reason to keep it other than the 2.4 and 5GHZ network ability. Oh yeah, the 802.11 ac too.

Find a way to disable DHCP on your Actiontec router, making it a modem. Call Verizon and ask them for instructions: "I have my own router, and want to disable the Actiontec's router. How do I do that?"
Here is one such question, from Verizon's support forum: http://forums.verizon.com/t5/FiOS-Internet/Disable-Actiontech-DHCP/m-p/281653#M1 9622 Try that.
The AirPort Extreme can be configured as a bridge, i.e. not performing any router function, but you will be losing most of its advantages by doing so.
Guest Network must be created by your router.

Older airport extreme base station as a network extender with new time capsule

Similar Messages

Maybe you are looking for