Older Clear 23" Display and Aluminum 23" use same LCD Panel??

I have an Al 23" that will only produce exactly half a picture. The other half is blank. My question is: if I was to swap the LCD with one from and older clear-style 23", would the two panels be compatible? Also, any suggestions on why the screen will only produce exactly half the picture may also be useful.

Hi bryanus,
Not sure if your "pinkish cast" at startup is similar to my recent problem with my clear 20" cinema display but.....
Took it to local Apple reseller, they ran some tests with it and the DVI to ADC adapter - it seem to be the display. I get a redish/ pinkish tint on my screen at startup and after the Mac has booted up.
Because it is not cover under the extended waranty, Apple quoted me about $750cad flat rate for repair. Considering that this is about half the cost that I paid when purchased two years ago - does not seem worth it to fix.
My suggestion would be that if your screen is still under waranty, take it in for repairs before it is too late.
Good luck.

Similar Messages

I have a file that was created in FH 11 and I am using same version.Originator opens file and everything is fine and also earlier version opens it fine.when I open it the links shift 1/8" up and left.Has anybody had this happen to them

I have a file that was created in FH 11 and I am using same version.Originator opens this file and everything is fine and also an earlier version opens it fine.When I open it it shifts the links 1/8" up and to the left.Has anybody ever had this happen to them?

What file format(s) are the "links"?
If raster images, do they contain clipping paths or transparency?
What is your platform and OS?
Were the FH documents created on the same platform (Mac or PC) as the one you are currently using?
Were the linked files created on the same platform (Mac or PC) as the one you are currently using?
Can you reproduce the problem with a newly created document and the same linked images?
There was once an issue with transparent 1-bit TIFF images shifting, but I believe that was in a previous version of FH.

HT1665 can ipad 2 and iphone 4s use same car charger?

can ipad 2 and iphone 4s use same car charger?

Perfect! A straight answer, finally. and one that this poor ancient techno challanged human could even understand!!!!!!! Thank you so very much!

Upgrading to Mountain Lion using free upgrade, download froze halfway, tried again and unable to use same code twice. Please help?

Upgrading to Mountain Lion using free upgrade, download froze halfway, tried again and unable to use same code twice. Is there a way I can get a new code without having to submit other information (scan/photo of proof of purchase)?

Open the App Store and navigate to the Purchases tab. You should see Mountain Lion there. You can click there to restart the download.

Connect one R/3 and two PI using same ABAP Proxy

Hi experts,
Please help me with follow:
I need connect one system R/3 to two systems PI (7.0 and 7.1) using ABAP Proxy.
How can see the repository objects of the two PI systems in transaction SPROXY?
Thanks in advance.

Hi Gaurav, hi Pedro,
the mentioned blog is nearly three years old, from that blog:
>Two systems exist in the landscape:
>System X : SAP XI 3.0 system and
>System Y : SAP R/3 on WAS 620
but Pedro wants to connect PI 7.0 and PI 7.1. assumedly with newer SAP systems. I cant find any hint in the blog how to connect 2 PI systems.
From my point of view it is not possible to connect 2 PI systems to just one ECC client (may be one system with 2 clients) via ABAP proxy at the same time. You can place always only one Integration Server f.e. at SXMB_ADM / Integration Engine Configuration.
Regards,
Udo

Stock Count MI01 for new,refurbish and second tyre - using same material no

Hi Everyone
Please assist me how do you differentiate between the new, refirbish and second tyre when you create a new count document - MI01
Susan

hii
U people will be using same material code for the all the three different categories ??
1. New tyre, 2. Refurnish 3. second..
Because material code is very much inportant in Physical inventory.
So can u check the material codes for the same .
U should use different ruight , if not u have mantion / maintain some text fo the same while doing physical inventory count.
Revert now any clarification
Thanks
SAP-MM

TS1398 I have a iPad and iPhone 4s using same wi fi phone says not connected to Internet despite showing wi fi signal and has been reset

Why would iPhone say not connected to Internet when using same wifi as iPad which is fine? Wifi on phone has been reset but same problem occurs

Reboot your router by turning it off or unplugging it from power for about 15 seconds.

Custom table can be displayed and not maintainable using SE16n.

Hi Gurus,
I have created a custom table with DATA BROWSER/TABLE VIEW MAINT. equal to 'N' (Display/Maintainance not allowed) in SAP ECC 6. The the requirment is, this custom table can be displayed using the transaction SE16n.
This requirement is existing in ECC 5. with same setting DATA BROWSER/TABLE VIEW MAINT. equal to 'N' (Display/Maintainance not allowed) and this table can be viewed using transaction SE16n.
would there be possible that this requirement be implemented in SAP ECC6? would this be due to the version?
Please help.
Thank you..
Regards,
SAI

Hi Kiran,
Thanks for your answer but unfortunately this is not what I'm looking for. Iam also familiar with &SAP_EDIT.
Well, my problem is, the custom table setting Data browser/Table view Maint. is set to "N Display / Maintainance not Allowed" ( under Delivery and Maintainance Tab). Also there is no table maintainance generator setup.
So basically with this setting, in transaction SE11 'Contents' is disabled. And with transaction SE16n, when you execute and tried to view the table, error "You cannot display zcustom_table with standard tool". (checkboxs are hidden)
What the requirement is looking, the custom table can be viewed (this is with the same setting above but can be viewed using SE16n and the checkbox maintain entries is automatically tick but when executed "auth failed" so, basically to view the entries, untick the checkbox then entries can now be viewed.)

I have a macbook with retina display and when i use it, it gets hot on the bottom is this normal?

When i use my macbook it gets hot on the bottom is this normal?

If you're talking about the "new" MacBook with retina display, it's normal (Especially when you're playing games or watching a movie) and like Stark_Hu said, it will start displaying the temperature warnings, slow the processor, and try to regain normal temperatures. I actually had that happen to me while I was playing the Sims 4 while having 3 Pages documents and 5 or so Safari pages open.
Now if you're talking about the Retina MacBook Pro, I would clean out the fan ports and everything because that doesn't seem too normal!

Are Titanium displays and Aluminum screen units interchangeable?

I had a friend who had a titanium powerbook and I remember it being similar to my aluminum powerbook. In fact, I didn't know there were two models. Anyways, I dropped my powerbook and need to replace the screen.
Does anyone know if these two are compatable as long as they are SVGA and the same size as the broken one is?
Also is it easier or better to get just the screen or the whole peice with the backside and all?

They're different resolutions, and the aluminum books have a totally different hinge than the titanium powerbooks. They're also a slightly different size (1/8 of an inch i think). needless to say, they aren't interchangeable. They may even have different interface types depending on the manufacture date of the tibook (DVI and VGA)

Display and interact with a vi front panel on remote C++ app

Hello:
I am new to LV and need a little advice. I need to display a LabVIEW VI front panel in my C++ .Net application that users can interact with to view real-time spectrum data. The C++ app (client) must reside on a separate computer(s) from the VI so that the client can connect from anywhere around the world and interact with the VI.
I am not sure about the basic architecture that should accompany a good solution. We want to use TCP/IP but not DataSocket. I do not have access to Measurement Studio but I do have access to LabVIEW Professional Development System v 8.2. Can anyone provide suggestions on what I need to do in order to
1. Connect to my TCP server using my C++ client app - I have already written TCP client and server code which communicate but now I need to integrate LV
2. Get access to the VI sitting on that server
3. Send the VI front panel to the client for display
4. Allow the user to modify parameters on the front panel displayed on the C++ client, send those changes back to the server, and refresh the front panel displayed in the C++ client given the new parameters (I would like a real-time display of the spectrum to always be available)
Is this possible? Has anyone done this using C++ .NET in VS2005? Are there examples I can mimic or references that will help direct me? I have searched and searched through NI's help and found a lot of good stuff but I'm still feeling confused about the best way to utilize LV.
Thank you in advance!

One more question ... what if I could use Measurement Studio? The documentation seems to indicate that it's easy to create network applications and therefore it would be easy for me to re-create our VI's front panel using Measurement Studio components in my C++ app and then simply connect those components to the networked hardware (TCP/IP or DataSocket) that could be located anywhere in the world.
Depending on what components you are using in your LabVIEW panel, it is probably pretty easy to build a Measurment Studio application to look like a LV panel.
Given that, you could use network shared variables to move data across the network, no TCP programming necessary -- I think that this is pretty easy to do, but I don't know the specifics about variable programming in that environment. Also, you will probably need to add some smarts to the server side to make sure that it is reading to and writing from variables in an appropriate manner.
Question: why can't you just use LabVIEW for the client application also?

DNS Help: Configure for local and extenal services using same domain name?

Hello all. I'm setting up a 10.5 server, have scoured these great forums and gotten close, but am still stuck. Any help would be greatly appreciated.
My network setup is as follows: Internet (2xT1) > modem > router/firewall/NAT device > XServe > switches > rest of network, clients, etc. Pretty standard, I believe.
I'd like to use this XServe on our local network/intranet/LAN only for OD, networked home directories, AFP, iCal, Time Machine, Print and Software Update.
My website is hosted on an external server.
My email is also hosted on a (different) external server.
Domain is school.edu
XServe name is xserve.school.edu
XServe is 10.0.0.25
I've gone through Apple's recommended DNS setup (supplemented by some great info found here on the forums....), and am able to connect to other Internet sites (with client's DNS server set as 10.0.0.25), but unable to connect to www.school.edu, or send/receive mail to/from mail.school.edu.
In short, connecting to external domains that are NOT related to my school are fine, but I'm unable to connect to any domain that IS related to my school.
If anyone out there can shoot me some notes on how to configure the DNS settings, zones, forwarding, etc. to accomplish this, I'd be VERY appreciative.
Thanks, in advance, to anyone who can help me out.
Cheers,
Tim

In short, connecting to external domains that are NOT related to my school are fine, but I'm unable to connect to any domain that IS related to my school.
If your server thinks it's authoritative for 'school.edu' then you have to add records for every host in the school.edu zone.
For example, if you want to be able to resolve 'www.school.edu' then you have to have a 'www' record. If you want to send/receive mail you have to add an MX record, and so on.
It doesn't matter that you're not responsible for those servers, it's just that since this machine thinks it 'owns' school.edu it will only respond with records in its own zone and won't care about what any other name server says, even if that other name server is authoritative for the zone.
FWIW, that's often why people running stub servers like this choose a separate subdomain (like 'dept.school.edu') so they can leave the main school.edu records on the main server and have full control over a subdomain.

PSE8 and PSE9 organizers use same catalog system?

Am currently using PSE8 on two systems but need to set it up on a third. Am considering whether to buy an add'l PSE8 license or a PSE9, but all of my images are stored on an external hard drive and are sometimes moved from computer to computer or shared over a network. Are PSE8 and PSE9's organizers' databases compatible with each other? In other words, can I access the same catalog (without conversions) from a system running PSE8 or PSE9? Thanks.

The short anser is No. The PSE8 catalog has to be converted to a PSE9 catalog.

Can wifi and ethernet be used same time for time machine?

Hi
Can an ethernet cable be used for the big backups with wifi being used for interim backups?
It seems the wifi method is ok for working in another room, albeit very slow. But when i am near the time machine unit would it be possible to backup via an ethernet cable and if so how would i set this method up?
ANy help appreciated.
Rgds
kev

Yes, it is possible for a computer to have two (or, if you have a tower, even more) IP addresses. By default the computer will use the one that is first on the list in the network panel in System Preferences.

Can u have more than one account on a single pc as i dont want others using my account, and we all use same pc

can i have more than one itunes account on a single pc, as i dont want others using my acount

The most practical route is usually for each person to have their own user account in Windows. Then everyone's iTunes library will be completely separate and each person can have and use their own iTunes Store account without impacting anyone else's information and account.
Regards.

Older Clear 23" Display and Aluminum 23" use same LCD Panel??

Similar Messages

Maybe you are looking for