Older GPU in CC 2014?

Hi, I bought my computer in 2012 and have an older GPU, GeForce GT 520. I was told even and older GPU is better than not having an external card at all, so I was trying to utilize it with Premiere Pro CC 2014. I went into Notepad and "run as administrator" and added my GPU to the appropriate Adobe/CUDA file, but I still don't have the option to use the graphics card when I open CC 2014. Can someone explain or help me out please? Thank you!

You can get by without GPU acceleration, as long as you don't use any of the heavy GPU effects, and truthfully, fewer things use the GPU than you'd think. If you start dealing in say most of the AfterEffects things, some of the effects within PrPro, or much grading say over in SpeedGrade ... you'll definitely notice a huge difference.
One thing you might need to do is select sections of timeline that aren't smooth even at 1/4 playback resolution, and "render" them. That helps with playback ... but as soon as you change anything in that section, you'd need to render it again. One can work that way. Especially if money is a big concern.
And then one starts dreaming of new machines ... sigh ... been there done that paid the bill and doing so again in a couple weeks!
Neil

Similar Messages

An unknown error appears when I try to save older files in CC 2014. If I outline the fonts, I can save.

An unknown error appears when I try to save older files in CC 2014. I can save the file if I outline the fonts. Is anyone else having this problem?

It also happens with my illustrator.
Have you found a solution with Adobe Support?
You can transform the all fonts in curves, but itll be impossible edite again. Sad. too sad.

Adobe Flash 10.1 Beta 3 with older GPU on OS X

I have an iBook G4 PPC cpu and ATI Mobility Radeon 9200 gpu. I tried Beta 2, which caused web browsers to freeze and crash. I switched to beta 3, but then read the release notes. Does beta 3 provide video acceleration for older gpu's? I only saw support for Mobility Radeon 4xxx HD series and higher. Am I better off with Flash 10 instead of the beta?

I find that in this exact configuration that Firefox simply crashes with that crash window. I have Disabled ALL extensions and plugins, Firefox works. Then I install ONLY Flash 10.1.85.3 and Firefox 3.6.12 crashes, running on Windows 7.

ICloud Photo Library (Beta) - Can't view older photos from before 2014

Hi All,
I turned on iCloud Photo Library (Beta) on an iPhone 6 and an iPhone 5s. These two phones had different sets of photos at the time. After the synch process completed the two phones now show the same photos. However, only the photos from 2014 are visible on both phones.
Interestingly, if I go to iCloud -> Storage -> Manage Storage -> iCloud Photo Library -> I can see that more photos have been stored than are visible. Storage reports 2600 photos, but I can only view 1800 through the photos application.
I'm hoping this is simply a Beta bug and my photos have not been lost. With luck they will become visible after a future update.
I'm curious if anyone from Apple can confirm this is a known limitation of the Beta. Or if anyone from the community has seen this same behavior.
Thanks

I really wish I could like iPhoto, but I don't know what in the world it is doing, and by locking me out of the Finder access to the iPhoto folder and doing things like duplicating photos without my asking, I've lost trust in this piece of software.
First thing is: It's a Photo manager. That's the basic key thing you need to grasp. Your photo is not the same thing as the file that contans it. That's why Finder access is not relevant. Import the Photo, manipulate the photo - losslessly - and then if you want to use the Photo in a document, upload it, whatever, put it into a new file designed for that purpose.
The illustration I use is as follows: In my iTunes Library I have a file called 'Let_it_Be_The_Beatles.mp3'. So what is that, exactly? It's not the song. The Beatles never wrote an mp3. They wrote a tune and lyrics. They recorded it and a copy of that recording is stored in the mp3 file. So the file is just a container for the recording. That container is designed in a specific way attuned to the characteristics and requirements of the data. Hence, mp3.
Similarly, that Jpeg is not your photo, it's a container designed to hold that kind of data. iPhoto is all about the data and not about the container. So, regardless of where you choose to store the file, iPhoto will manage the photo, edit the photo, add metadata to the Photo but never touch the file. If you choose to export - unless you specifically choose to export the original - iPhoto will export the Photo into a new container - a new file containing the photo.
So as long as you're hanging on to the idea that Photo=Jpeg iPhoto is never going to work for you.
If you're willing to let go of that - as you do with Addresses, as you do in iMovie, Lightroom, Final Cut, APerture - then you can begin to make sense of iPhoto too.
Regards
TD

Need older version of dreamweaver 2014 to advanced for my computer, but it doesn't have previous versions on try one applications

dream weaver 2014 to advanced. fluid grid doesn't show up properly on my computer.
I need dreamweaver cc or cs6. anything before dreamweaver 2014

Darlen618 what type of Adobe membership do you have? If you wish to evaluate Dreamweaver CS6 the installation files are available at Download CS6 products.

Congratulations Adobe on GPU identification in 8.1.0.81

Guess what is new in Premiere CC 2014 8.1 release?
No more "cuda_supported_cards.txt" or "opencl_supported_cards.txt" files!
Both this laptop and my main editing computer with so called "unsupported" GPU's (GTX 765M and GTX970) are working fine and even opening an older CS6 project I did not get the "unsupported" message. I believe it did come up initially and I just breezed by it but now opening a third older CS6 project that had a much older GPU when it was last opened did not give me the message. Evidently, once Premiere 8.1.0.81 learns that it is a hardware accelerated usable GPU never asks you again. I further tried installing a second GPU a GTX 770 Sc along with the GTX 970 Sc and Premiere saw it immediately.
Congratulations again to Adobe on this great improvement for Premiere.

Welcome to the forums.
I did not imply that there was any problem with the GTX 770 and the GTX 970. I actually run these both in CS6 (one at a time) very successfully. In earlier CC you got problems with notices that these cards were "uncertified" and one way of getting them to work was to edit the appropriate files. Now in Premiere Pro 8.1.0.81 those two files do not exist and recognition of a card that supports hardware accelerated MPE effects and features is automatic.
Maybe someone can comment on After Effects in the new version if this is also automatic.

Mail auto redirecting one account to another; Emails older than 1/5/14 missing from Inbox

On our MacBook Pro running 10.6.8 Snow Leopard, using Apple's Mail 4.6 (1035), my wife's Mail account began experiencing two problems, one starting about 2 weeks ago, the other just recently noticed.
She uses IMAP to download her primary account from DirectNIC. This account syncs the Inbox with her iPad Air. She also POPS mail from a secondary account from WebHostingHub.
1. About 2 weeks ago, emails received by her primary account starting being automatically copied and redirected to her secondary account. Thus, when she uses the "Get Mail" button (or her mail is automatically downloaded), she ends up with two copies of every email in her Inbox, and the ones in her primary account are automatically marked as read.
She does not have any rules in Mail, nor does she have any email forwarders in her DirectNIC or POP settings. We can not figure out how this automatic forwarding started or how to turn it off. We have rebuilt the Inboxes for both her primary and secondary accounts.
2. Yesterday my wife noticed that her Inbox for her primary account is missing emails she had in there that were older than January 5, 2014. All older emails that had previously been in her Inbox are now gone, and we can not find where they went. We have not made any changes to her Inbox's behavior, and she was barely using even 1% of her quota on her primary email's IMAP server at DirectNIC.
Any clues about how to fix any of the above would be welcome.
Charlie

I called my ISP and sorted out the problem. Something changed in the behavior of the POP account so that it started causing both of the problems I described in my original post. That POP account was using the same email server info as the primary account, and was removing emails after a week, as well as looping back emails sent to the primary account, creating the duplicates.
I deleted the POP account, which fixed both problems. She forwards emails sent to her secondary account to her primary account. I then used the directions at http://support.apple.com/kb/ta23485 so that she can send emails from the email address she is using as her secondary account.
Charlie

Wrap not working in Muse 2014

Wrap function not working at all. I have a text box, with text, and a picture picture, with picture. The picture is arranged to the front and all the items are on the same layer, but when I go to the Wrap box everything is greyed out. I've tried multiple boxes and even created a new site to test whether this is an issue with older sites in the 2014 update. Nothing works, there is no combination of boxes that allow me set a Wrap.
Any ideas?
Thanks,
Jen

Zak Williamson (Adobe) wrote:
Hi Jen, I'm frankly not sure what additional instructions to provide. Both mac_heibu and agm 123 have made valiant attempts to describe how to enable text wrap in Muse.
1) Create a text frame and populated it with text.
2) Draw a rectangle.
3) Cut the rectangle.
4) With the Text Tool click and insertion point in the text.
5) Paste
6) Select the rectangle (which is now inline in the text flow).
7) Select the Wrap settings you want via the Wrap panel.
Text wrap capabilities are limited on the Web. Wrap is only available for items pasted within the text flow that will be wrapping around the graphic. Basically the rectangle (or other objects) can be aligned to the left or right in the text frame with the text flowing around only one side of the wrapped object. And only rectangular text wrap is supported.
Thank you Zak, and thank you to mac_heibu and agm 123 for their efforts. While I understand the positive intent of their posts, it is immensely frustrating to be told the same thing over and over without anyone acknowledging the fact that I have clearly stated that I have followed those steps and I STILL get the results I pictured above.
So I will say it for the fifth time, thank for the instructions on the textbook method on how it is suppose to work. Textbook "suppose to" doesn't seem to be the issue. As with other bugs in Muse 2014 (Source San Pro preference problem), I am hoping someone has a workaround beyond the way it is "suppose to work" I need someone who has some trouble shooting suggestions. I've cleared prefs. and reinstalled Muse to no avail. I created a new site to test if it was an issue with files created by older versions of Muse, but brand new site does the same thing.
Thanks,
Jen

Export -mailbox to move emails older than 400 days to pst file

i have written the below script
$date = get-date
$MailboxList = get-content "E:\del_users.txt"
ForEach ($Mailbox in $MailboxList) {
Export-Mailbox -Identity $Mailbox -PSTFolderPath E:\pstfiles\$mailbox.pst -BadItemLimit 1000000 -StartDate $date.adddays(-450).ToString('MM/dd/yyyy') -DeleteContent
my target is to move all emails older than 450 days to a pst file. i ran this on one user and noticed his emails from today to 450th day from today was moved out.
In simple terms, i want to move all emails in all sub-folders that are older than 01-January-2014. Once this is done and when he logs to owa or outlook he must be only be able to see emails from 01-Jan-2014 to 17-Mar-2015.
how can i achieve this with the above script?
cheers

We are facing this error with few mailboxes which are exclusively in one DB under one Storage Group & the mailbox is on EX001 with Exchange 2007 SP1
We have 2 exchange servers:
EX001 - Exchange 2007 SP1
EX002 - Exchange 2007 SP3 (fully updated)
I have setup a Windows 8.1 32bit machine with Outlook 2013 for running the export-mailbox cmdlet to export mails to a PST file
We are facing this error with few mailboxes which are exclusively in one DB under one Storage Group & the mailbox is on EX001 with Exchange 2007 SP1
We I run the below script,
$date = get-date
$MailboxList = get-content "E:\del_users.txt"
ForEach ($Mailbox in $MailboxList) {
Export-Mailbox -Identity $Mailbox -PSTFolderPath E:\pstfiles\$mailbox.pst -BadItemLimit 1000000 -StartDate “01/01/2005" -EndDate “12/31/2013" -DeleteContent
I get the below error, only from some users and not all users.
Error was found for User ([email protected]) because: Error occurred in the step: Moving messages. Failed to copy messages to the destination mailbox store with error:
MAPI or an unspecified service provider.
error code: -1056749164
I went through the link: https://social.technet.microsoft.com/Forums/en-US/3c75a6db-74a4-484c-a7f4-5b411900d09b/exchange-2007-exportmailbox-error-message-on-only-certain-mailbox?forum=exchangesvrdeploylegacy
I understand this is a permission issue and i have tried all of the below
1. The user doing the export is a member of local administrator group in both source and target machine.
2. the user doing the export is granted the exchange administrator role on EMC in both the source and target machine.
3. Given full access permission to the username moving the mailbox to PST
4. given receive-as permission to the username moving the mailbox to pst
5. Given genericall access to the DB
6. Create a New User account (EX: ExportAdmin)
Add this account to a Exchange Server Administrator Permission Both Source and Target Exchange Mailbox Server
Add this account to Local Administrators Group Member Both Source and Target Exchange Mailbox Server
Make sure this account DO NOT HAVE ANY Domain Admin/Exterprise Admin permission(Just keep Domain User group permission)
Assign Mailbox Full Access to this account by follow Cmdlet
Get-Mailbox -Server "EX-CCR" | Add-MailboxPermission -User ExportAdmin -AccessRights FullAccess
Runas with ExportAdmin account (Open EMC)
Get-Mailbox -Server "EX-CCR" | Export-Mailbox -PSTFolderPath
Done
7. On the DB, we set the retention to 0
however none of the above has helped me resolve my issue.
Please help me correct this

Adobe 2014 Release Publishing issue

We upgraded to the latest version of Muse 2014. We now see 2 installs of the Muse App. The older one and the 2014 release. When we open the site file in the new release and then try to publish, it by default is trying to create a new site in Business Catalyst. This is not correct. Any help?
Thanks.

Hi Eugene,
Thanks for the reply. We tried the preferences by renaming them and then removing them. It still did not work. We also tried the quick Crtl+Alt+Shift and was unable to get that to work. We also tried this: Illustrator CC or InDesign CC crashes at launch. And that did not work either.

How can i find from bookmarks from and older installation

It will no older installations 07/01/2014.

Is the older installation on the same computer or on another computer and is the older installation and Firefox still l working.
*See [[Restore bookmarks from backup or move them to another computer]]
Please read the article I have linked to then post back with how you get on and provide further information if you have difficulties.

MSI GeForce GTX 970 with MSI Z68A-GD55 (G3) motherboard

Hi!
I have seen a similar issue here that was resolved with the help of this forum. (https://forum-en.msi.com/index.php?topic=251322.0). I still want to ask my questons however, since I have a slightly different situation.
I recently bought a new Graphics card, a MSI GTX 970, to replace my older EVGA GTX 570. After installing it, the time it takes to startup the computer is quite a bit longer. The very begninning of the startup process is the part that takes longer, I see a black screen and "B2" in the lower right hand corner, with the older GPU this was seen for a few seconds but now it stays that way for about a minute. After that I see some random colors in stead of the MSI logo and then the regular "Starting Windows" image appears, from there the startup is as fast as before.
When the computer has started it seems to work perfectly, and the new graphics card is great, everything on "ultra" in games etc.
I guess the way to resolve this issue is to update BIOS. I am a bit afraid of this however, of the risk of destroying something.
What would be your suggestions? Is it better to update bios or to leave it as it is, since the computer works? Are the any risks with keeping this bios version, that seems to have some issue with the graphics card?
Any help would be greately appreciated!
/Johan
Board: MSI Z68A-GD55 (G3)
Bios: Version 23.7
VGA: MSI GeForce GTX 970 Gaming 4GB
PSU: Corsair TX 750W Modular
MEM: G.Skill Ripjaws X Performance 2x4GB
CPU: Intel Core i5-2500K Sandy Bridge 3.3GHz – not overclocked
System Harddrive: SSD 120GB Corsair SATA 2.5", Force 3 Series
Extra Harddrive: 1TB Samsung SP SATA-2* 7200RPM Spinpoint F3
OS: Windows®7 Home 64-bit
Cooling: Standard fans from the case (Fractal Design Define R3) and for the CPU plus one Scythe Slip Stream 140mm (1200rpm)

Ok, thanks for the advice.
I have started looking at the instructions and have downloaded the installer and the bios file. It seems Norton Internet Security has some problem with the installer. When I start the installer it reaches the point when it shows the current bios version, after that it is interupted by Norton. The reason that Norton gives is that it has found something called "Suspicious.Cloud.9.B" in the file b4.bks. How should I react to this?

Mac Book Pro 13 inch Graphics Issue with Yosemite

I have a major graphics issue with my Mac Book Pro mid 2010 after upgrading to Yosemite. I have a 2.66ghz with 8gb memory and 320M 256 MB NVIDIA graphics card. Since upgrading to Yosemite (after a clean install) I have had the following issue that are driving me crazy;
When I use more than one program my screen displays large blocks of unrecognisable fuzziness. I have two screen working off my Mac Book Pro, one is the Apple 27 inch theatre screen.
My system works slow despite have ample free memory available on my disk (over 150gb)
It is becoming an increasing concern as this issue builds up over the day to the point where I need to reboot to fix, however as soon as I use Photoshop the system almost grinds to a halt. Other issues that are bearable but ned addressing include;
Keyboard often does not work on startup and requires you to pull out the keyboard and reconnect (intermittent).
Lost email when sent (intermittent). I had hoped that this would be fixed in this updated release.
Laggy behaviour in general.
I am hoping someone has an idea to fix these issues or are also sharing my frustration. Can someone suggest fix as this is not a workable situation for Mac book Pro users and 2010 is not that of an old computer. Apple???

So you erased your drive and installed 10.10 and then 10.10.1 and everything else was t hrough Setup Assistant, through reinstalls, or through TimeMachine restore?
A four-year old laptop may be at the point where that small older gpu and processors have more trouble.
you might want to hold off and go back to Mavericks or whatever you had - hopefully you cloned that system before doing clean install, upgrade to 16GB, maybe throw in an SSD... or save and get the next MacBook Pro to come out.
And you checked your apps at http://www.roaringapps.com for compatibility.
Might help just to see what if anything shows up in output from Etrecheck.
Probably thought this was laptop MacBook Pro, it is not, probably best moved to Yosemite forum.

Ref GTX 680 2nd DVI port stopped working

I'm having trouble with my GTX 680 second DVI port. It seems to register that it's connected, but doesn't have any signal.
Now, it's worked perfectly for weeks... until I replugged it yesterday.
My set-up (that used to work):
>DVI port 1 goes to main monitor
>DVI port 2 goes to second monitor
>HDMI port clones DVI port 2 and goes to TV
And this is what I did:
>Unplug 2nd DVI port, use it temporarily for another machine
>Replug hours later, not working
And what I've tried:
>rebooting
>reseating the GPU
>blowing dust out of the GPU
>emptying my computer for power (pull out powerplug, hold power button for 30 seconds)
>clearing CMOS
>different drivers (both with and without clean install option)
>plugging monitors into 2nd DVI port (no signal from any monitors)
>tried DVI to DVI, DVI to VGA, and DVI to HDMI - nothing seems to work
>tried older GPU, it worked (with both ports)
>tried the onboard DVI port for 2nd monitor, works but then I can't "clone" it to my TV.
It also doesn't seem to get any signal during POST and BOOT (tried both monitors).
The monitor also appears in "Screen Resolution" but as "Available display output: on Intel(R) HD Graphics 3000," but it doesn't work.
When I messed around with it, trying to get it work, it also had an option to "force VGA" or something like that - but that did not work either.
Specs:
>ASRock Extreme3 Gen3
>2500K
>8gb Samsung Green low profile ram
>MSI GTX680 with ref cooler and EVGA backplate
>Corsair AX750
>OS: Windows 8 x64 (although I doubt the operating system is an issue, since I don't even get output during POST/boot).
I've tried searching, but to no avail. I've found people with similar issues, but none that managed to solve it. Example:
>forum-en.msi.com/index.php?topic=142971.msg1066807#msg1066807
>www.overclock.net/t/1280021/cannot-connect-second-monitor-to-first-dvi-port
>rog.asus.com/forum/showthread.php?16788-Monitor-not-coming-out-of-standby-unless-DVI-unplugged-then-plugged-back-in&s=754453e3498101ccfa8f0f35926c8771
(had to remove the http:// since I get this error: "Sorry, you are not allowed to post external links.")

Quote from: badboy2k on 10-November-12, 01:29:01
I'd RMA the card as it sounds like the 2nd connector is broken and is not working guess it wasnt soldiered in place properly and its cane away on one of the connectors!!
Sounds probable, but if you look at the first link I posted where other's have similar issues (https://forum-en.msi.com/index.php?topic=142971.msg1066807#msg1066807) he tried swapping his GPU and it did not work for him. It might of course still be that the connection is just bad on my GPU and something else for him.
I'll wait a while and see if other's can come up with some good suggestions. If not, I guess I have to RMA it.

Black Screen with Cursor (Tried most solutions)

To save your time and mine, I’ve tried all options in “press f8” and “recovery disk”. Over the past 3 days, I read almost all threads, videos, articles, and official MS help containing any mention of this problem. I also applied many commands, created few
“SystemRescue CDs” and “Kaspersky Rescue 10” on a usb drive. I follow instructions very well, and have never been stumped by a windows problem like this before. If someone solves this, you are a wizard!
Nothing has worked so far, but I really want to figure this out and not ‘reinstall’. It appears to be a simple and popular problem: “Right after Win 7 boot Logo, I get black screen with white mouse cursor,
no matter if I boot in safe mode, last good configuration, or normal startup”, but all the solutions that worked for most people are not working for me.
TL;DR: (answers to any of the 7 questions in the end will help me out)
Custom System: Win 7 64 bit (updated consistently), 4gb ram, Quad Core 2.66, 64GB SSD (Crucial M4) and 4 hard other drives. Only windows installations/updates have been installed onto the SSD, no other programs. Only 1 OS has ever been installed
on this computer. Never dual booted.
Mobo: Asus Maximus Formula. GPU: AMD HD7870LE
2014-04-19
I haven’t installed or downloaded any programs in the past 3 weeks, and did not notice anything unusual up until this incident.
In the morning the computer went into hibernation because I was away, it couldn’t wake up (usually happens), so I turned off the power supply. Turned it back on, and computer resumed, I was concerned as it may have run out of hard drive space on my 64GB
SSD (4GB free), but it booted fine.
Later during the day, I decided to restart the computer, and as it booted up again, it went into “start up repair”. I let it run and restart, and it arrived at the dreaded Black screen with mouse cursor, of death, right before logon screen.
Symptoms while on this black screen.
Ctrl alt del doesn’t work, power off doesn’t work, cursor can move, pressing ‘shift’ many times doesn’t bring up the ‘sticky key’. No task manager.
Hard drive is not loading anything, just idle.
Computer falls asleep after 15 minutes or so, and can wake up back to this black screen, so it remembers my power settings
Safe mode loads the drivers fine, but also gets stuck on the same ‘black screen with cursor’ forever
I tried every option in the ‘advanced boot’, including ‘safe with command prompt, safe with networking, last known configuration, etc’
Last known configuration, and all of the above, all boots to ‘black screen with cursor’, this means windows believed it booted fine the last time, so it remembered this configuration. That’s because all the drivers loaded without issue. While loading
Safe Mode, I can see windows loading all the drivers ok.
No restore or backups (I know, I do not deserve to live, lesson learned)
I tried all applicable functions from the ‘recovery cd command prompt’, bcdedit, bootrec, diskpart, and still couldn’t get it to boot.
Commands applied in Elevated Command Prompt from Installation DVD: (very careful with backups and overwriting)
Diskpart -> list volume, tells me that 100mb is system reserved, the other 59GB has no label, and is a different partition
Bootrec -> scanos, tells me that I have 0 windows installations, used fixboot, /fixmbr, /rebuildmbr, all successful. Mounting the drive later on RescueDisk’s TestDisk shows no problems with either partition.
BCDedit: shows both boot manager and winloader to be on the same drive, and I referenced it with a typical BCDedit enum output, and nothing is out of place.
I went into Regedit by typing “regedit” in command prompt in Win7 recovery cd, and confimed that ‘Shell=explorer.exe’ under:
HKEY_local machine/software/microsoft/WindowsNT/Currentversion/winlogon.
Sfc /scannow couldn’t run due to “Pending repairs/restart”
So I used: SFC.EXE /scannow /offbootdir=c:\ /offwindir=c:\windows
Which ran and repaired some errors the first time. I ran it more just to make sure, with restarts in between, it gave me
Win resource protection did not find any integrity violations.
So the system files appears to be fine and not corrupted.
Bootrec /scanos does not detect any windows installations. “0 Windows installations identified”, yet “Diskpart -> Detail Disk” and bcdedit both detects the windows directory.
From windows recovery disk:
Startup Repair diagnosis: (Show Details)
All tests completed successfully
Boot status indicates that the OS booted successfully
It seems that the system and the OS boots successfully, and windows believes it boots successfully (that’s why last know good configuration gives me the black screen also, and Win Startup Diagnosis all says it booted successfully”
It’s the second before it enters into the logon screen, the black screen and movable cursor appears, and hangs here forever. What programs load during this step, and how can I find out this info? Is there a diagnosis tool that allows me to see the programs
as they load during windows start up?
Other attempts:
Then I read it could be windows using “winresume.exe” instead of winloader.exe, since I have “hiberfil.sys” in C:\windows, so I backed it up and deleted it using SystemRescue.
Another thread said “winevt” bad logs, in C:\windows\system32\winevt were causing this black screen, so I backed it up and deleted that also, and it still won’t boot.
I plugged in the devices that were attached (just 1 ext hard drive, through a 10 port usb hub) that was connected while it went into hibernation on April 19th, and it didn’t help.
The files on that disk and the file system is not corrupt; I tested it by taking it out and docking it on a usb Blax Duet, and my laptop did a scan disc, and it’s fine. The Sfc Scan also shows that it is ok.
I also unplugged all the other sata drives, switched the SSD sata cable around to other sata ports to no prevail.
So far I know:
Very unlikely that it’s a virus problem, I haven’t installed or downloaded anything this month, scans from Kaspersky 10 rescue disk shows nothing, Farbar scan shows nothing. I also never install anything suspicious, like toolbars or junk. I scan regularily.
Not a driver problem, since I haven’t changed or updated anything. I unplugged all devices, and starting in 640x480 mode also gives the black screen with cursor. Drivers all loaded fine while starting windows and safe mode
Boot files are intact, windows system files are in the right place since windows actually boots into a shell? Both bootloader and boot manager show up in bcdedit enum scans
Not due to system file corruption, since file integrity are confirmed ok by above CMD commands, and windows diagnostic tool, and testdisk.
My questions:
What could be the cause of this? I didn’t make any changes to BIOS, windows settings, perform any updates, suspicious activities, installations, or crashes, before this. The files on that disk and the file system are not corrupt either, I tested it by
taking it out and docking it on a usb Blax Duet, and my laptop did a scan disc, and it’s fine.
Which program (classpnp.sys? explorer.exe? winlogon.exe?) is being loaded right before “windows logon screen” that would cause it to hang with a black background and cursor?
How can I find out this information? Is there a tool that can record all programs that are being loaded by windows at boot?
I only have access to regedit, elevated command prompt, and I can change files through SystemRescue or Kaspersky recue, how can I get the computer to boot past that black screen with a mouse cursor? The answer seems so close.
From the Rescue Disks, what could I really do to get past the black screen?
Those who are computer technicians could tell me: If I take it to a computer shop or technician, what could they do in a situation like this aside from all of the above? Do they have some ‘next level’ access tools or are they just going to waste my time
and tell me I have to reinstall?
At the very worst, I will obviously reintall. On my 64gb SSD, I didn’t install any important softwares. All my important software installations are on a separate drive. However, will they still work if I did a ‘Inplace Upgrade’ install of windows? Does
registry get wiped?

Hi,
Have you tried to take startup repair when booting with the rescue disk?
Startup Repair
And we'd better bring the PC to the vendors, then take an examination of the hardware health.
How does the Bootrec /scanos show 0 installation identified? We may take a try with chkdsk from command line to check if there are any disk errors:
Run Check Disk from a Command Line to Check for and fix Disk Errors
Please also take a check if the system reserved partition is stay in health:
Understand (and Get Rid of) the Mysterious Small Partition
Another shoot, please try to rebuild BCD:
Use Bootrec.exe in the Windows RE to troubleshoot startup issues
Regarding the repair install, detailed information please take a check with the article below:
How to do a repair install to fix Windows 7
Hope this may help
Best regards
Michael Shao
TechNet Community Support
Did you read his post at all as it does not look like it.
As to take it to a vendor "Custom System:"" Win 7 64 bit (updated consistently), 4gb ram, Quad Core 2.66, 64GB SSD (Crucial M4) and 4 hard other drives. Only windows installations/updates have been installed onto the SSD,
no other programs. Only 1 OS has ever been installed on this computer. Never dual booted."
As to your other suggestions he has tried them all as have thousands of us out here , all you have to do is search the internet and you see millions of hits about this.
And glad to see a moderator can mark a non answer as an answer.

Older GPU in CC 2014?

Similar Messages

Maybe you are looking for