Older iSight (Firewire 400) on New Mac Mini Intel (Firewire 800)?

Hi! I have an older iSight camera (circa 2003), model number A1023/EMC no. 1950, which uses the older FIrewire 400. It was purchased with one of the first gen Mac Mini's (PowerPC) which I still have.
I've upgraded and now have a new Mini with an Intel Core 2 Duo, and the newer Firewire 800 port. I have a Firewire 400->800 adapter, and when I plug the iSight in, the green light on the camera lights up, but then goes off. The system doesn't recognize the camera (System Profiler/Hardware/FIrewire). iChat doesn't see a camera.
This is the adapter:
http://www.amazon.com/gp/product/B002HMTV1I/ref=oxya_ohproduct
Under the profiler/firewire, I see " Firewire Bus: Maximum Speed: Up to 800 Mb/sec" but no entries for the camera.
Is the problem in the adapter? The computer, or the camera? Is there a way to force the Firewire 800 port speed down to 400? Don't know what to do. Thanks for any advice! --michael

Hello michael
Connecting your iNtel min's Firewire to any Firewire 400 cable automatically sets the correct speed.
If your iSight and cable will work with other Macs and if Firewire 800 devices will work with your new mini, perhaps your new adapter is faulty.
My method for verifying external iSight function is explained here:
  http://www.ralphjohns.co.uk/EZJim/EZJimpage4.html
You will need to add your adapter to the other connectivity devices (ports & cables) that must be tested.
If other Firewire devices can be recognized by your new mini, the next tests I would suggest is to connect your adapter, FW-800 cable, and iSight to your old mini to see whether it still works there. If not, and if you have reset your iNtel mini's Firewire ports, the cable or adapter you have may be defective.
If iSight works with the new cable and adapter on the old mini but not with the iNtel one, apply all relevant suggestions from Apple's iSight Troubleshooting article to your new mini:
  http://support.apple.com/kb/HT2090
The reset suggested there sometimes restores proper iSight function.
One other possibility is that a different brand of FW800 cable might work for you. Depending on which FW800 cable you are using, this thread may be of interest:
  http://discussions.apple.com/message.jspa?messageID=9091838
EZ Jim
G5 DP 1.8GHz w/Mac OS X (10.5.8) PowerBook 1.67GHz (10.4.11)   iBookSE 366MHz (10.3.9)  External iSight

Similar Messages

  • Brand New Mac Mini (Intel 2.53 320HD 4gb - January 2010 - new Airpot Extrem

    I purchased a new Mac Mini Intel Duo 2.53 320HD 4gb and a new Airport Extreme, new iWorks, wireless Mouse and keyboard, ipod touch 8gig and have a iphone 3gs 16g already few months old. My Mac Mini keeps trying to install something in System/Library/CoreServices and halts permission check until Disk Utility saying that it has been altered and will not repair. I did notice in that directory everything about Apple Remote Desktop, including ARDAgent / AppleVNCServer.bundle which contains curtainlock, kickstart, remote desktop.incs, RemoteDeskoptAgent, lock.jpg, networkUser.tiff, Lockscreen, lockscreekLeopard386, VNC Gues, sshHelper, writesettings, VNC PrivilageProxy, AppleVNCServer, Screensharing, Upgrade User, UserAccountUpdate, WorkflowServerRunner, Ticket Viewer and so on. My new Apple Extreme Dual Band, paid $179 for it, shows another base station when trying to re-set to factory settings that doesnt match mine, and I have no other apple stuff in my apartment. Also, before I can even enter the password and set it up, the Amber solid light turns green, and thanks me at the end for setting up my wireless with a usb printer. I don't have, nor ever setup a printer, no in my sharing, and under Airport at the top of my screen listing all the networks in my area also has a second section listed Devices - and it shows a hpsetup under my computer's airport.
    Would buying techtools deluxe help fix this problem? Or norton Security for mac? or use the PGP Corporation Whole Desktop security Apple recommends to encrypt everything and re-install my operating system after I do a full erase with a one zero clean on both empty and disk02 - Machintosh HD?
    Also my iphone 3gs is acting strange. It says the AT&T firmware is 5.11.7 and 3.1.2 (7D11) but the actual model number has changed from whatever M..L/A to now just M...LL (no /A).
    Thanks for any help.
    Rick
    [email protected]

    Actually, he has 2GB of RAM and a 2.26 GHz processor.
    I'd suggest trying it. Worst thing that could happen is your system is too sluggish to use, in which case you reformat the partition (or remove if you want) and install a different, more compatible version of Windows. But personally, I could see it working well for you. However, if you're using an Apple Wireless keyboard and Mighty/Magic Mouse, you may run into some problems with pairing, however, this is a Boot Camp driver problem and can be fixed fairly easily.
    I can't see it creating any problems, I'm running Windows 7 32 bit on my Mac mini with only 1GB Ram and a 1.66 GHz processor. And it's running really smooth. I should also note that Windows 7 uses far less resources than Vista, thus it runs a little better on slower machines than Vista did.

  • Upgrade to OS 10.4 with SW coming from new Mac Mini (Intel duo core)

    Is it possible to upgrade my G4 PowerBook to the latest OS 10.4 and iLife06 with the SW provided and installed on new Mac Mini's with the Intel duo core? That would make purchasing a new Mac Mini a sweeter deal.

    No.
    The disks that come with new machines are specific to that machine.
    You will need Tiger and iLife '06 if you want to upgrade your PowerBook.
    Regards,
    Colin R.

  • New Mac Mini Intel Duyo Core...soooo slow??

    Hi - I just replaced my G4 tower (which had a 1Ghz upgrade) for a duo core 1.66 Ghz Mac Mini. Since I have had the G4 for 5 years I was expecting to be happily surprised at how fast the new Mac Mini is....
    But, man this thing is sooo slow. It takes longer to launch applications, I get the spinning wheel all the time, and often I just have to hold and click on the menu items and wait fro the menu to drop down. Could it be because I simply did a migration from the G4 and it would be faster to install the applications separately to the new Intel system? I don't run anything intensive, just MSWord, GoLive, Entourage, and Safari mainly.
    I ran an xbench (www.xbench.com) report and ended up with a 48.
    Maybe I was expecting too much from an $800 computer, but it is slower than my 5 year old desktop. In fact I think if there is nothing obviously worng with it I'll be sending it back and hold out for a G5 instead.
    Anyone had similar issues?

    Word, GoLive and Entourage are PowerPC applications. On a Macintel, they will run under Rosetta emulation, which means that they will be slower than on a comparable PPC Mac (given the fact that the Core Duo is faster than about any G4, performance should be somewhat similar with standard apps - maybe still a bit slower with more intensive apps). And apps running under emulation tend to have higher memory requirements. If you run both three apps (Word, Entourage & GoLive) simultaneously, then the slowness you experience isn't very surprising. Adding RAM would probably make things a bit faster.
    While some people feel comfortable with installing additional RAM themselves, the Mini is not exactly made to be user-serviceable, and if you have any doubt you should have it installed by Apple or an Authorized Service Provider. Moreover, because Apple will charge you a lot for RAM, I would suggest going to an AASP that might offer better prices. Some will even install third-party RAM for you (for a fee, but considering how expensive RAM can be when purchased through Apple, it could very well be worth it). You can find RAM on websites such as Crucial.com, and Crucial also have a Memory Advisor Tool which will select the right RAM for your Mini (they actually guarantee it will work with the Mini), as well as a lifetime warranty.
    Or, since all of the applications you mentioned (except Safari) are not, and will not be Universal before some time, you could return the Mini and get a PPC Mac, maybe a G5 tower or a refurbished iMac (G5) ...

  • Will old iSight camera work with new Mac mini?

    will an old isight camera work with a late 2014 Mac mini? If so what adapters will I need?

    Matthewlopez wrote: will an old isight camera work with a late 2014 Mac mini?...
    Yes (if the old external iSight works.)
    Apple's long ago discontinued Firewire External iSights were great webcams, but they are old (as consumer electronics go) and some may have had pretty rough treatment. Even NOS (new old stock) items may have been damaged in storage or handling.
    If you have access to an external iSight, you can test it using the suggestions from this page: http://www.ralphjohns.co.uk/EZJim/EZJimpage4.html.  To reduce the possibility of conflicts for old Firewire iSights, I suggest you disconnect all other Firewire peripherals until you get your external iSight working with your mini. Then connect other needed items one at a time and test each to determine whether you can use any without conflict.
    If you are considering buying an external iSight now, a new webcam (with warranty) may be a better choice. Many available alternatives are listed here: http://www.mac-compatible-web-cam.com/
    If you want more examples of external iSight and newer minis, take a look at some of the results of this search for your question.
    Matthewlopez wrote: ... If so what adapters will I need?
    You will need a Thunderbolt to FireWire Adapter.  This adapter offers only a Firewire 800 connection.
    The Firewire connection on old external iSights is a Firewire 400 connector.  Therefore, you need some way to connect to the FW800 connector on your adapter:
    • To use the FW400 6pin-6pin cable that comes with iSight, you can use a 6pin-9pin adapter
      like one of these:
      http://tinyurl.com/ydsbb6m  (I use this one.)
      http://tinyurl.com/cgll7o
      http://www.sonnettech.com/product/fw_adapter.html
    • This Firewire 400-800 cable can work:
      http://store.apple.com/us/product/HA833ZM/A/ (I use this one.)
    • Some report that this low-priced alternative cable works:
      http://www.newegg.com/Product/Product.aspx?Item=N82E16812189097
    Message was edited by: EZ Jim
    Mac OSX 10.10.2

  • Transfering files from old mac mini to new mac mini

    I just purchased a new mac mini intel duo OSX 10.4.10, with which I am using my existing monitor, keyboard and mouse. I want to transfer important files and software from my old original mac mini without having to purchase a whole new set of peripherals, which seems to be indicated when the set up assistant directs connecting the CPU's with firewire cable. Please advise. Thanks.

    No need for a second set of peripherals. Plug the firewire cable into both computers and the keyboard into the old Mac and start it up in FireWire target mode (hold the T key while turning it on). Now unplug the keyboard and connect it to the new one. Start up the Migration Assistant and go.

  • New Mac Mini... airport problems

    Hi, I have a problem with the wireless connection of my new mac mini (Intel Core 2 Duo 1.83GHz)... it's very slow and the signal strength is always up and down... what to do? I also have an iBook and a PC connected at the same router and they're working fine. Should I wait for a firmware upgrade or should I contact Apple for support? Thanks

    +I think I placed the mini in the best place+
    OK, but since it's not working for you, it might still be useful to know how everything is arranged, distances between computers and router, and anything between mini and router. And presence of nearby 2.4GHz cordless phones.
    To quote AndyO:
    "The real problem is that unlike almost every other problem in system troubleshooting where symptoms can help one refine the possible causes until only one is left, variable wifi is something that is very difficult to deal with at a distance because there are many, many factors which can impact the quality and level of signal, and _much can hinge on small details that often get overlooked_.
    "It should be noted however that the general consensus has typically been that Mac minis suffer poorer wifi reception than other systems, in part one suspects as a result of the antenna being up in the top-right corner of the enclosure where it is in part screened by the casing. Thus, make sure there is nothing directly above the mini itself, or immediately to the side of it which might hinder signal."

  • Dual Powermac G5 vs Mac mini Intel Duo

    I'm sure this has been discussed already, but I would some more input on this.
    I am looking to upgrade to a faster Mac. I am currently running a G4 1.25 DP with 2Gigs of RAM. It's a fine machine, but I would like to take advantage of some of Apple's more powerful units. Anyway, I am considerering a Dual Processor 2.0 G5 Powermac with about 2.5 to 4gigs of RAM, or my other choice is one of the new Mac mini Intel Core Duo models with RAM maxed and a faster larger HD.
    My question is--what machine would give me a better performance running Universal Apps, such as Logic, Soundtrack Pro, ect...? Obviously, the Apples are all going to way of the Intel and I have been hearing great things about the new Intels. The Mac-mini has limited expandabiltiy and one Firewire port, but runs Intel. What to do? I may consider the Imac G5 core duo as well.
    Any feedback would be appreciated.
    Thanks, Randy

    well here' my experience...
    i recently sold a dual 1.8 G5 with 2GB RAM. reason being simply to get rid of it while it was still worth something. on top of that, it was really large, loud and put out a ton of heat. i bought the Core Duo mini with a GB of RAM as a sort of temporary machine until the next Intel "Pro" towers come out. i've been using it for about a month now for Logic Pro, GarageBand, Ableton Live and Reason and soon my SoudTrack Pro Universal disks will be here as well. i was really concerned that the system would feel slow coming from the G5 but i can totally recommend this machine with confidence as it feel and performs as fast as (and sometimes faster than) by dual G5. i'm talking when using Universal binaries of course. these Intels are fast. the mini is a silent, snappy little machine. there are a few things i miss that will eventually prompt me to buy a tower such as:
    limited internal storage options - i believe the largest 7200RPM hard disk you can put in the mini is the 100GB from Seagate. of course, external Firewire and USB storage is always an option.
    the limited graphics card could be an issue for some. it doesn't seem to directly affect audio performance but just knowing that it's using your hard RAM is a bit unsettling.
    i miss FireWire 800, even though the G5 had serious slow-down issues when writing to fw800.
    i miss using two displays.
    having said all that; the speed, quietness and cool running temperature of this mini is enough to outweigh any negatives. i notice zero speed decrease from the dual g5 and cost me about a third of the price. it will make a great temporary workstation for me and when the next towers come out it will make a great livingroom entertainment system and perform node duties over gigabit ethernet. don't hesitate. it's a great system.

  • Got my mac mini intel singel core yesterday!! first impressions !

    hi to all,yesterday i got my mac mini singel core 1,50 GHz 512 ram 60 s-ata, here are my first impressions:
    of course it looks like the same;ir-sensor for the frontrow remote control is at the right side,inside the drive slot (very nice solution).It boots up faster than my old mac mini G4 1,25 Ghz 1GB ram.first of all i did a xbench test,here are my results:old mac mini g4 1,25 1 Gb ram xbench points=36,37; new mac mini intel single core xbench points=63,37 !!!Very nice and smooth system import from the old ppc os x was no problem using firewire. virtual pc 7 does not work any more.
    overall rating after 1 day, very good outstanding product
    greetings tobias
    mac mini / pb G3 wallstreet   Mac OS X (10.4.5)   mac mini single core 1,5 GHZ

    I also got the Core Solo and so far am very much satisfied with it. One of my highest Xbench scores was 65.40, twice as fast the score of the lowerend G4 Mac Mini. The feel of the system's respondsiveness is certainly on par with other Intel based Macs I tried at the local Apple stores. Boot time is under 30 seconds most of the time. One weird thing I noticed is that when open " About This Mac", the system identifies the processor as a 1.5GHz Intel Core Duo. However, System Profiler says it's a Core Solo. Well, I will only open "About This Mac" from now on
    To answer your question, Tobias, 720p plays awesome but 1080p not looking good. The new graphic eventhough integrated is still an improvement over the graphic of the old model. Why? It supports Core Image and you get all the nice effects in Dashboard, also HD contents play much better obviously.
    512MB of RAM is not enough. I'm glad that I didn't buy the Core Duo because with that $200 in difference, I can up the fund to buy a pair of 1GB DDR2 memory and a 7200RPM hard drive for upgrades. The hard drive on the Mac Mini has always been a weak link. SATA is supposed to be faster than the old IDE ATA, but from what I've seen so far, it's pretty much the same.
    Powerbook 12' 1.5 | Mac Mini 1.25 | iPod Nano   Mac OS X (10.4.2)  

  • How to use a mac mini intel with 30" cinema display

    Arg, I just bought an Apple 30" cinema display to go with my new Mac mini intel, but oops the 30" apple cinema display has to use a dual link dvi card. Anyone know how to get out of this horrible situation without buying another new computer.
    Thanks!

    If you want to run the LCD at it's high 2560x1600 resolution, then you have absolutely no option whatsoever than to buy a PowerMac or MacBook Pro. Otherwise, you will be able to run the panel at 1280x800 with the Mac mini, which wouldn't make much sense though.

  • Tiger Update Crashes my Mac Mini Intel

    I got a new Mac Mini and finally got it going though it was not easy to transfer from my eMac. But I prevailed. Then I made the fatal mistake of updating all that the Software Update software suggested. Now my brand new Mac Mini will not run at all.
    REWIND: I tried to update my eMac a couple of weeks ago to Tiger. I did that and ran Software Update and GUESS WHAT? It crashed my eMac so badly I had to reinstall ALL the Panther software.
    Did Microsoft buy Apple???

    I figured out the problem last night after a week of gnashing, grumping, and general anxiety. Hope this post helps others with a similar problem.
    I have a free Lexmark 1150 All-In-One printer attached to my Mac. Apparently Tiger DOES NOT like the Lexmark application that turns off the printer during Restart and Shutdown. The application is in Library/Startupwhatever folder and I just trashed the Lexmarksleep..app (whatever it is named - I'm at work and cannot remember the exact name) and erased it.
    Now my Mac Mini is back working like a Mac - PERFECT.
    fiat1969
    Mac Mini Intel Dual Core Mac OS X (10.4.6) Brand New
    Mac Mini Intel Dual Core Mac OS X (10.4.6) Brand New

  • Logitech headset Skype and Mac Mini Intel

    Hi,
    I own a Powerbook G4 and a new Mac Mini Intel Duo Core.
    Both machines run the same latest OSX version 10.4.6.
    On the Mac Mini I have a problem using Skype with my Logitech Headset 350 (usb). The system does recognize the headset, but for some reason the microphone of the headset is not working. The speakers work fine. I did set the prefrences right in the Skype menu.
    But on my Powerbook G4 the headset works perfectly fine.
    Could this be an Intel issue? Maybe I a driver (can't find one on the Logitech site)? Anyone any clue?
    Thanks, Fred
    Mac Mini Intel Core Duo 1.66   Mac OS X (10.4.6)   1280 MB ram

    On the Mac Mini I have a problem using Skype with my
    Logitech Headset 350 (usb). The system does recognize
    the headset, but for some reason the microphone of
    the headset is not working. The speakers work fine. I
    did set the prefrences right in the Skype menu.
    I have the same headset and it works fine. First, directly connect it to your mini, don't use the keyboard's USB hub since it can only drive 100mA devices. Second, check that the mic is actually on (the blue LED is constantly on, not flashing).
    If it still doesn't work go to System Preferences->Sound->Input then select the "USB Headset" and speak into the mic and watch the input level meter. If necessary adjust the "Input Volume".
    Mac Mini   Mac OS X (10.4.6)   Core Duo / 2GB

  • Mac mini Intel Core Duo and HK Soundsticks USB, Any Problem???

    Hello everyone.
    I am thinking of "transferring" my "old" HK Soundsticks USB for my sis's new Mac mini Intel Core Duo.
    Is there any issue or problem with the mac detecting the USB speakers?? I thought I read somewhere here a while back that generally the Intel Macs might have a problem detecting the USB speakers.
    Thanks and cheers.

    Hi NewMoses, thanks for replying but you have to be specific, if you just bought your Soundsticks, it is most likely the HK Soundsticks II, is yours?? which has a normal audio jack, unlike the 1st Soundsticks, which has a USB input.
    I am sure the Soundsticks II with the audio jack would have not much problem on the new Intel Macs, since they are what I considered a "physical audio input", unlike the USB, which involves the USB technology, where more complication may come into play.
    Thanks and cheers

  • TS4456 New Mac mini and older wireless keyboard connect, but don't pair

    In setting up my brand new Mac mini, the wireless mouse paired with no problem, but I'm having trouble with the keyboard. I am using an older mouse and keyboard from my previous mini, which is completely shut down. The keyboard shows as being connected to the computer, but when I enter the code and press Return, the code disappears and nothing else happens. After a while the code reappears and I repeat the process with the same results. After several attempts, nothing else happens. I've tried rebooting twice, checked the keyboard batteries, made sure the keyboard light is blinking to show it's discoverable, but I can't move past this screen. I don't know what else to try. Please help!

    Hi, it isn't paired to another device is it?
    Might see this...
    http://www.christopher-parsons.com/blog/technology/solved-bluetooth-devices-not- connecting-to-osx/

  • Is it possible to install an older version of Mac software on a new Mac mini?

    My wife just bought a new Mac mini that was Yosemite loaded. She struggles with font sizes and hopes we can end her frustration. I am still using Mountain Lion on my iMac and can easily adjust font size everywhere (all software, Safari, Firefox, etc.). Can we meet her Mac mini needs?

    An older OS will not have the correct drivers for the new Mini.  With Yosemite you can adjust the contrast, transparency and also pick "dark mode" which can help in readability.  Look in preferences, accessibility and also general for those settings.

Maybe you are looking for

  • Can I backup an external hard drive using time machine?

    I've got a 2008 Mackbook that's getting very full of photos and music - 75% of the HDD.  I want to move it all onto an external Toshiba HDD that's formatted to MS-DOS (FAT 32).  Before I moved it all, I checked to see if time machine would back up th

  • Balance Carry Forward in Accrual Engene: "No matching data found in fiscal"

    Hi, I have executed ACACCARRYFORWARD (Balance Carry Forward in Accrual Engine) to 2011 and I have success message on screen of Overview of Balances Carried Forward. But, when I execute Start Periodic Accrual Run (manual  accruals) for 31 January 2011

  • About to purchase my 1st imac 27in i5, what do I need to do a mirror image?

    I am very close to choosing an imac over another pc but was just wondering what I would need (and where to get it), how difficult and how much it would cost around to do a mirror image of my screen onto a 32inch samsung that has a vga port, 2HDMI por

  • Continuation of aborted change run failed in BW 3.5

    Hello experts, everytime when an attribute / hierarchy change run has been aborted (by means of unexpected runtime errors) I failed in starting it next time. Error RSENQ 2 ("Lock not set for: activation of hierarchy") occured in this case. I found a

  • My mac mini is not burning CD's.

    My mac mini is not burning CD's. It can read CD's but writing CD's doesn't work, but burning DVD's works fine. If I burn from iDVD it works fine but if I create a Burn Folder and drag Pictures from iPhoto to that folder it goes threw the process of b