Older MacBook connects to guest netowrk, but not main

I recently set up a home network with the newest model Airport Extreme. I've set it up with a home network, as well as a guest network. It has been working flawlessly, with one exception. My older MacBook (3yrs old, white) had been connecting to my my home network, but starting a couple days ago, it began refusing to connect. I can still connect fine to my guest network, but the whole point of me buying this whole set up was to use the older MacBook as a media server for the rest of my home. Any advice would be greatly appreciated.
Thanks!

LOST_Island, welcome to the discussion area?
Have you checked the Connection List for the MacBook to make sure that the name of your main network appears first in the list of wireless connections?
System Preferences (gear icon on dock)
Open Network
Click AirPort on the left to highlight it
Click Advanced at the lower right
Make sure that the name of your main network is at the top of the connection list. Drag it to the top if needed.
Click OK, then click Apply
If no help, can you tell us what happens if you temporarily turn off the Guest network on the AirPort Extreme? Will the MacBook consistently connect to your main network this way?
AirPort Utility - Manual Setup
Click the Guest Network tab
Remove the check mark next to Enable Guest Network
Click Update at the lower right and let the AirPort Extreme restart
You really should not use the Guest network unless you have "guests" because it does pull some bandwidth away from the main network.

Similar Messages

  • Older Macbook connects to Time Capsule, but not really

    Problem: My wife's Macbook (Intel Core Duo) is able to connect to my new Time Capsule, but it quickly loses its connection. It doesn't really disconnect though - it still says that it is connected with full reception, but there is no internet, or time machine, and I can't even ping the router.
    The router logs show that she is still connected though, because they don't say "Disassociated with station" until she turns airport off.
    There are definitely a lot of wireless networks around here, but I don't think interference is the issue, since many other computers are working fine. Her computer can connect to some of the other routers just fine. She could also connect to my old router just fine.

    rvenable wrote:
    Problem: My wife's Macbook (Intel Core Duo) is able to connect to my new Time Capsule, but it quickly loses its connection. It doesn't really disconnect though - it still says that it is connected with full reception, but there is no internet, or time machine, and I can't even ping the router.
    Welcome to Apple's discussion groups.
    When that happens, if you open the Network panel of System Preferences, select the AirPort connection item on the left, click the "Advanced" button, then the "TCP/IP" tab, do you see reasonable values for the several fields?
    It might help to reset the connection settings on your Mac using these steps one at a time until it works again:
    1) Use the AirPort menu bar item to turn AirPort off, then on again.
    2) In the Network panel of System Preferences delete the AirPort item from the left column, then add it back.
    3) In the same panel as (2), define a new location and see if you can make that work.
    4) In the same panel, select the AirPort connection item, click the "Advanced" button, select the "TCP/IP" tab, then click "Renew DHCP Lease".
    5) In the folder /Library/Preferences ( not <yourhomefolder>/Library/Preferences), move the folder SystemConfiguration onto the Desktop, then restart your computer. See if you can now make your AirPort connection work.
    They may not help, but they'll only take a couple of minutes to try. Before you try these, note all your network settings, because the latter steps will destroy them.

  • Old  Macbook connects to corporate ethernet --- but not my new Macbook Pro

    I've now tried nearly everything to solve this problem: My old white plastic Macbook connects to the corporate LAN --- but not my new mid-2009 Macbook Pro.
    All the settings are the same. I have on occasion managed to connect the new Macbook Pro to the network but only for a short time.
    Our IT folks have checked the cable, the ports,routers etc and everything is just fine.
    I am able to connect to the network from other ports in the office --- but not from my office (except with the old white plastic Macbook).
    Please, can someone help?

    Fishbair wrote:
    I've now tried nearly everything to solve this problem: My old white plastic Macbook connects to the corporate LAN --- but not my new mid-2009 Macbook Pro.
    All the settings are the same. I have on occasion managed to connect the new Macbook Pro to the network but only for a short time.
    Our IT folks have checked the cable, the ports,routers etc and everything is just fine.
    I am able to connect to the network from other ports in the office --- but not from my office (except with the old white plastic Macbook).
    Please, can someone help?
    If you can connect when using other ports in your office the problem is almost a certainty that the issue is with the port you can't connect with. Did your IT guy switch ports at the switch side to one that is known to work? We can't troubleshoot your LAN and it sounds like your computer is set up correctly if it connects using other ports.

  • Image Capture connects to card reader but not camera

    Image Capture and iPhoto do not detect new connected Canon camera.  Will read card via card reader.  Camera will connect to older macbook iPhoto and Image Capture but not my iMac.  Image Capture in Mountain Lion has no perferences anymore.  Tried Repairing Disk Permissions but no success. Any ideas?

    Sorry, there is no setting on the AirPort Extreme card built-in your new iMac that can be tweaked to "force" a connection to the Netgear's "n" network.
    Does your Netgear allow for different Network Names (or SSIDs) for each of its radios? If so, you can try an experiment by renaming the 5 GHz radio's Network Name, and then, specifically connect the iMac to it.
    Also, since "n" can operate on either radio, it appears that your iMac is "locking" on the 2.4 GHz radio. Does your iMac have any trouble connecting to any other "n" Wi-Fis? If so, then there may be a problem with either the AirPort Extreme card or the internal antennae on the iMac ... and it would warrant a visit to your local Apple Store to have them take a look.

  • My macbook connects to my wifi but when i bring up safari it says you are not connected to the internet, please help...

    my macbook connects to my wifi but when i bring up safari it says you are not connected to the internet, please help...

    Try restarting the browser or computer..
    if it still doesn't work, try with a different browser like chrome or mozilla

  • Internet works on guest but not main network

    We have an airport extreme connected to a Dsl modem. The internet works fine when connected to the guest network but when connected to the main network the browser just times out and says server is not responding (for any website we try). Same thing on several computers (iMac, 2 different MacBook Pros).
    The internet settings look the same for both guest and main network so I don't understand why one would work and not the other.
    I tried getting rid of the guest network but the main network still failed to load webpages (even though it appears to be connected to internet).

    Are you connecting the AirPort Extreme to a simple modem (it will only have one ethernet port), or is the device a gateway (combination modem/router with 3-4 ethernet ports)?

  • IPhone 6 Plus connects to Airport Extreme but not the internet

    Light on my Airport Extreme is green and the Airport Utility on the iPhone 6 Plus shows that it's connected to the Airport, but not the internet.  What the strange this is, I am still getting email and message notifications but just can't view them.
    However the internet connection on both my iPad Air and Macbook Pro are working perfectly fine, and they are both connected to the same Airport Extreme. 
    The firmware on Airport is updated, I have tried to reset network settings and restarting the iPhone with no luck.  Any suggestions on what to do?

    Give me a screenshot of the working network IP setup on the MBP.
    It should look like this. I need to see the IP address and you can also copy and paste for me the dns address.
    The same thing from the iphone IP address and DNS will then help me figure out what is wrong.
    If they both have an IP like 10.0.1.xx then the DNS or gateway (what apple calls router) has setup wrongly .. try setting manually with the same values exactly as the MBP.
    If however the IP is something public like 200.100.2.100 and the other ipad is similar the Airport is setup wrongly in bridge and you have exhausted the available IP addresses so redo the setup of the Extreme so it is in router mode.

  • Our IPod connects to the WIFi, but not to the internet.

    Our IPod connects to the WIFI, but not to the internet.  We have a wireless router which we connect our MACBOOK to the internet and our IPod.  The MACBOOK works fine, but not the IPod.  It shows to be connected to WIFI, but whenever we try to connect to an internet site i.e. Sarfari, we get an message "Safari cannot open the page becuase it is not connected to the internet".  We have tried rebooting, but it has not helped.

    Try:
    - Resetting the iPod. Nothing will be lost.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Setting
    - iOS: Troubleshooting Wi-Fi networks and connections

  • TS3972 My Apple TV connects to the wifi but not to the internet.

    My Apple TV connects to the wifi but not to the internet. Currently using a D-Link Router and Shaw Cable in BC Canada.
    Apple says "Connections through proxy servers are not supported". Would that be Shaw? How can I update the ATV
    software without connecting to a TV and the internet? Can I connect it to my MacBook Pro? ATV worked very well in Arizona
    using CenturyLink as an ISP provider and their modem/router. ATV software is 5.0.

    What happens when you try to connect? I would contact your ISP

  • My ipod touch is connected to wi-fi but not access safari, youtube, itunes, app store safari even tells me that is not connected to internet, also had trouble at first because I could not connect to wi-fi, afternoon much as told me that the password was i

    my ipod touch is connected to wi-fi but not access safari, youtube, itunes, app store, safari even tells me that is not connected to internet, also had trouble at first because I could not connect to wi-fi, afternoon much as told me that the password was incorrect when it was correct, please tell me as I do to let me access youtube, safari, app store, i tunes...
    thanks

    - Reset the iPOd. Nothing will be lost.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections

  • My ipod is connect to wi-fi but not the keyboard

    my ipod is connect to wi-fi but not the keyboard??????

    WI do nort understand what you mean by "not the keyboard" Please provide clarification.

  • Turned on sharing in iPhoto on my iMac.  My MacBook sees all the photos but not all events or albums appear.  I have many albums in several folders.  Any suggestions?

    Turned on sharing in iPhoto on my iMac.  My MacBook sees all the photos but not all events or albums appear.  I have many albums in several folders.  Any suggestions?

    Hvaing the same problem on my iPad since iTunes and ios5 upgrade - hoping for some updates from Apple to resolve problem - research has shown we are not alone!

  • Connection ... able to connect using sql developer, but not sqlplus or toad too

    Hi folks, having this issue, with only one of my so many databases, what might be the reason and how to fix/correct this, please assist.
    Able to connect using sql developer, but not sqlplus or toad too; sqlplus error: ORA-12154: TNS:could not resolve the connect identifier specified
    thanks in advance.

    SQLDEVELOPER works since it use JDBC Thin & does not use tnsnames.ora
    ORA-12154 ALWAYS only occurs on SQL Client & no SQL*Net packets ever leave client system
    ORA-12154 [B]NEVER[/B] involves the listener, the database itself or anything on the DB Server.
    ORA-12154 occurs when client requests a connection to some DB server system using some connection string.
    TNS-03505 is thrown by tnsping & is same error as ORA-12154 thrown by sqlplus or others.
    The lookup operation fails because the name provided can [B]NOT[/B] be resolved to any remote DB.
    The analogous operation would be when you wanted to call somebody, but could not find their name in any phonebook.
    The most frequent cause for the ORA-12154  error is when the connection alias can not be found in tnsnames.ora.
    The lookup operation of the alias can be impacted by the contents of the sqlnet.ora file; specifically DOMAIN entry.
    TROUBLESHOOTING GUIDE: ORA-12154 & TNS-12154 TNS:could not resolve service name [ID 114085.1]
    http://edstevensdba.wordpress.com/2011/02/26/ora-12154tns-03505/

  • WIFI stopped working after I woke the computer up, now says connected to the network but not the internet, all other coputers and devices connected still with no problems, have pinged IP address from router and got the message "4 packets sent none receive

    Hi,
    WIFI stopped working after I woke the computer up, now says connected to the network but not the internet, all other coputers and devices connected still with no problems, have pinged IP address from router and got the message "4 packets sent none received"... Help
    I have tried network diagnostics which doesnt help... The only other ting is, when I woke the computer up it said tat another device was using my IP... My wife had plugged her phone into the computer to charge etc but even when i turn wifi off on the phone there is no change... also in settings on the phone the IP address is different...

    The answer to your question is - neither!
    Your PC should to configured to obtain an IP address automatically, and to obtain DNS server IP addresses automatically, from the Airport Express. This is the way Windows (and Macs for that matter) are configued by default, and that is the way most people have their computers set up. If you manually configured your PC's IP address to be the same as your wife's Mac, it certainly explains why your PC is not able to access the internet.

  • My ipod connects with other computers but not mine.

    my ipod connects with other computers but not mine.

    Start here:
    iPod not recognized in 'My Computer' and in iTunes for Windows
    iPod: Does not appear in Windows or iTunes and Device Manager is empty
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

Maybe you are looking for

  • Can I access printer options using airprint from my ipad?

    How can I access airprint printer options, such as cancel or page setup?

  • CD Cover and Booklet templates

    Hello I have completed all the artwork in Pages for the contents of a CD booklet and the Covers, but I need to massage it so that fits into the proper CD Cover/booklet templates. Where do I find these? Once again, thank you Peter

  • INTO clause expected in SELECT statement

    Hi all, I have this pl sql code that errors out:an INTO clause is expected in this SELECT statement. Code Declare prev_col1 FLOAT(10) := 0; temp3 temp2%rowtype; Begin select * from select col1, col2, col3, lag(col1,1,0) over(order by rownum) prev_col

  • Is there any app like MathCad in apple?

    i want to make calculations like integrals. is there any program like mathcad that excists in microsoft?

  • Qualifier Field Not Shown in Qualified Table

    Hi All, Can anybody tell me why the values of qualifier fields are not shown in the qualified tables? And where are those qualifier values stored, in the main table or in the qualified table itself? Best Regards Jerome