Older MacBook Pro noise

Since installing Snow Leopard, the laptop is noisy.  I'd like to see a picture of what moves: that is, what do the moving parts look like?  There is vibration under the area left of the touch pad.  What is making the sound and what does it mean ?
I disconnected the 2TB external drive in case that was a factor:  no difference.

Three components would make noise: the fans, the hard drive, and the optical drive. Where you are describing it is hard drive - on some models the optical drive is on the right side under the palm rest. Assuming there's no media in the optical drive the only sound and vibration from that region would be the hard drive. A hard drive isn't perfectly silent and can make a noticable click as the read/write head moves from track to track. Excessive clicking though can be an indication of a drive going bad.

Similar Messages

  • I have an older macbook pro and the hard drive is starting to go (making loud noises). i tried to back up to an external hard drive (my passport essential se) using time machine and the computer keeps shutting down. suggestions to complete backup please?

    I have an older macbook pro and the hard drive is starting to go (making loud noises). i tried to back up to an external hard drive (my passport essential se) using time machine and the computer keeps shutting down. the same thing happens when just trying to save my pictures from iphoto to a flash drive. suggestions to complete backup please?

    Sounds like you'll need to access that drive while it is not booted. You need to replace it anyway, so do that, then one way or another (ext enclusure, et), access it and copy files.
    If you keep trying to boot it, you might kill it for good and not get your files, so just swap it out first.

  • How to connect an older MacBook Pro with mini VGA port to HDMI?

    I have an older MacBook Pro with a female mini VGA port.  I would like to watch movies which have been downloaded to my laptop on my flat screen TV.  Newer MacBook Pros have a mini DisplayPort for which Belkin makes a cable to use; however, I have not been successful in finding either an adapter or converter to use with my older laptop. 
    FYI.  Am currently using Leopard but am upgrading to Snow Leopard.

    I believe you naeed the Apple ADC to DVI adapter.

  • How do I uinstall Yosemite? It's not compatible with my older MacBook Pro, and I can't connect to my printer or use safari

    How do I uninstall Yosemite? It's not compatible with my older MacBook Pro and I can't connect to my printer or access Safari

    How to Downgrade OS X Yosemite Back to OS X Mavericks

  • How do I disable airplay on an older macbook pro?

    I have an older macbook pro (model is mid-2010) with Mountain Lion installed.
    When my Apple TV is on, my computer keeps trying to connect to it via Airplay.  But Airplay is not supported on my macbook pro and the sound stops working.
    How do I disable my Mac from connecting to Airplay?

    Do this test with the Apple TV on:
    If you go into System Preferences > Sound > Output, which line is selected?
    If the Apple TV is selected, can you select Internal Speakers? Will it stay on?
    With Internal Speakers selected, do you get any sound output?

  • How do I restore a Time Machine backup from a newer MacBook Pro to an older MacBook Pro?

    My MacBook Pro is in the shop and am using my older MacBook Pro in the meantime. I want to restore my older computer with the lastest backup from my newer computer, but I'm not able to see/access the backups from my newer computer - I can only see the backups from my old computer. Any suggestions?

    That is probably due to the older computer being too old.
    You can do a manual restore to a USB drive plugged into the computer. Then select the files you want.
    See pondini Q14-17 on restore.
    http://pondini.org/TM/FAQ.html
    Particularly 16 and 17.
    You tend to migrate from older to newer computer and OS.. and it is not going to work the other way around.

  • I have an older Macbook pro with a dvi output and I want to watch movies on my tv. I have a dvi to hdmi cable but the only image I get on my TV is my desktop background. None of my movie players with appear on the TV screen. What am I doing wrong?

    I have an older Macbook pro with a dvi output and I want to watch movies on my tv. I have a dvi to hdmi cable but the only image I get on my TV is my desktop background. None of my movie players with appear on the TV screen. What am I doing wrong?

    Hi Maryan,
    Open System Preferences > Displays > select the window for you external monitor > click on the Arrangement tab and check the box next to Mirror Displays. It may be slightly different in Lion, but the idea is the same.

  • How do you connect an older macbook pro to your TV?

    I have an older macbook pro and trying to find out what cable to buy to hook it up to my tv with an hdmi cable. i think its DVI but i dont know if its male, female. any help?

    See -> About AirPlay Mirroring in OS X.
    And you need to update your system software to Mountain Lion or later.
    Good luck,
    Clinton
    MacBook Pro (15” Late 2011), OS X 10.??, 16GB Crucial RAM, 960GB M500 Crucial SSD, 27” Apple Thunderbolt Display

  • Video chat from older macbook pro (ichat) to new macbook pro

    How can I video chat from an older macbook pro (2011) to a new macbook pro with retina second gen

    You can't -  but you can use FaceTime on the iPad and FaceTime on the Mac running Lion.

  • How can I access files that I moved from an older MacBook Pro to a newer one via Firewire and Migration assistant.  The files show up on the new MacBook but cannot be opened.  Thanks!

    How can I access files that I moved from an older MacBook Pro to a newer one via Firewire and Migration assistant?  The files show up on the new MacBook but cannot be opened.  Thanks!

    Get info then check permissions then add your curent user name (it was probably different on old Mac) and give your username full read/write permissions.

  • TS4088 I have a MacBook pro that has power issues and will not start but the hardrive is fine.  I do not want to lose all of my files so I was wondering if it's possible to transfer my hardrive from a older Macbook pro to a new one if I were to purchase o

    I have a MacBook pro that has power issues and will not start but the hardrive is fine.  I do not want to lose all of my files so I was wondering if it's possible to transfer my hardrive from a older Macbook pro to a new one if I were to purchase a new one?  Also, the software is not updated as the computer hasn't worked for about 2 months. 
    Also, if it is possible to transfer the hardrive, would my iTunes music transfer as well?  It is not saved in the cloud.
    Thanks for your help, it is much appreciated.

    You computer is probably perfectly repairable, but if you want a new one anyway, it is perfectly possible to transfer the data from the faulty one.
    But it would be a mistake to simply put the old HD in the new computer.
    These are the steps:
    Remove Hard drive from faulty computer. (very easy on Unibody MBPs, do-able but not so easy on older MBPs)
    Put it in a cheap enclosure
    Connect it the new computer
    Boot up new computer.
    If the new computer has never been run before the Setup Assistant will ask if you want to import your apps, data, settings etc from either another mac, another HD connected to the Mac or a Time Machine back up.
    Obviously chose the second option (another HD connected to this Mac) and follow prompts.
    If the new computer has already been run (so Setup Assistant doesn't run when you boot it up), you will need to use Migration Assistant...or run the installer again so that Setup Assistant runs again.
    Message was edited by: Mike Boreham...added sec on line

  • Within the last hour, I noticed that my older MacBook Pro, while I was playing it in iTunes, lost contrast on the screen.  I am sorry, but I did not take exact notes on this event.  Around the same time, I did do a back up, uploaded software, etc.

    Within the last hour, I noticed that my older MacBook Pro, while I was using iTunes, lost contrast on the screen.  I am sorry, but I did not take exact notes on this event.  Around the same time, I did do a back up, uploaded Apple software, etc.
    I'm using two MacPros simultaniously, the old one for iTunes, and the new one for the other things.  My new one has no problems, so am wondering if there is an easy way to correct the older MacPro's contrast problems.  The computer is over three years old, and I'm wondering also if this failure is an aging sign.  (I also have other problems, such as a noisy DVD drive, which is part of the reason I bought a new MacBook Pro.)

    Is the older MBP a pre-Unibody model from early 2008? If so, it could be having this problem:
    http://support.apple.com/kb/ts2377
    If so, you would be entitled to a free repair.
    The lost contrast could be considered distorted video.
    Do you have an external monitor? If the external shows the same lost contrast, the graphics chip is likely the culprit. If the external is OK, then you probably have an issue with the built in display or possibly with its connections.
    You may also want to check in Universal Access to see if the contrast bar is set in its normal position (all the way to the left).
    Apple has a special test they can run to diagnose the NVIDIA issue, so if you have access to an Apple Store, make an appointment at the genius bar to have it run.
    Good luck!

  • How can I transfer information from my older MacBook Pro to my new MacBook Pro?

    How can I transfer information information from my older MacBook Pro to my new MacBook Pro? Does anyone have an answer because I spoke to 2 people at Apple & both sent me the wrong cables.....

    Did they mention Migration Assistant?  You can use MA with FireWire, limit is the speed of the older unit.  MA will guide you and allow you to choose what to transfer.

  • Error Code 6 on trying to install a previously bought CS4 from an older Macbook Pro to a new iMac.

    Iam trying to install my Photoshop CS4 onto my new iMac that I used on an older Macbook Pro that no longer works but when I try to install it I get an error code 6. Any help is greatly appreciated.

    Murray,
    These illustrate what I'm experiencing.
    Image #1 - Shows the template file open and the place it is and always has been saved.
    When this template is saved DW does not offer to update the site pages that use this template as expected.
    So I attempt to update the pages via Modify:Templates:Update Pages and this is where I encounter the 'error -43' message.
    You asked for a file. Please be more specific as to what file or files. Presume you'd want the source code in a text file, correct?
    I appreciate you time and interest.
    John

  • Using my boot hard drive from an older Macbook pro into a new one?

    Hi,
    I put my hard drive from my older Macbook pro 15" 2.16 Ghz Core2 Duo computer (Mac 10.6.4) into my new Macbook pro 2.4 GHz (2010) as my boot drive. Since then I've upgraded to 10.6.6 and everything seems fine.
    My concern is that since my OS was installed on a different computer, I might not have all the proper drivers for my new machine. Can this be the case? Does the OS install all drivers for all models all the time? Sometimes I wonder if my graphics card drivers are installed because it seems slower than I expect, but the graphics card shows up in System Profiler.
    Thanks!
    Jason

    You can resolve that by installing the 10.6.6 Combo Updater instead of the smaller incremental updater.
    +BTW, you should never use a version of OS X that's older than the version that shipped with the computer.+

Maybe you are looking for

  • Delivery schedule ME2L

    Material which is already partially delivered are appearing in the base list of ME2L Report but the same is not reflecting in Delivery schedule report.Pls help

  • How to solve a problem about an Apple Authorized Distributor . . .

    hello to all ... I am Vlad from Romania from the beginning ... maybe I will not find an answer here but I reached a point of desperation ... so I will tell you my story ... and I hope that someone will hear me and maby help me in 13 December 1012 ...

  • Acrobat updater error

    I got error message while installing Acrobat 9.0 "adobe updater install manager has stopped working" working on Windiws 7 64-Bit.

  • Charts not displaying in the PDF output

    HI, We have developed a rdf using the Oracle reports Developer (version 10.1.2.0.2) and developed a RTF Template using the Template Builder ( Version 10.1.3.3.2). We are able to view the data in the chart and table formats locally in the PDF format.

  • How to define a specific export path?

    Hello, I'm using Crystal Reports XI. In older versions it was possible to define an own standard path for the export. In CRXI it is now always the windows folder "own documents..." How is it possible to set my own path?? Regards