Older MacBook running on 10.4.11 not able to update to iTunes 9.2
Has anyone else run into this? iTunes says that my 9.1.1 is the current version. I have a reserved iPhone 4 - will I be able to sync it to this MacBook? (I was unable to update to 10.5 b/c of corrupted optical drive that crashed the computer...even when sent into Apple for repair they couldn't repair. Grr)
Does iTunes 9.2 show up if you run Software Update from the Apple menu?
Similar Messages
-
I just purchased an Iphone 5 and i cannot sync it because I'm not able to update my itunes because I'm not able to update to Osx 10.7?
Apple is selling Mac OS X 10.6 on their online store, and 10.7 by phone. The latest version of iTunes requires 10.6.8 or newer.
(72029) -
Trying to install Brother MFC-j475dw printer on older macbook (running osx 10.5.8) and need an inbox driver as Brother drivers are only for 10.6 and newer. Any ideas?
Yes, I have the tethering plan. I was connected with USB and Bluetooth when I had the 3G.
I am can now connect with USB, I recieved a new not seen before window when I plugged in the phone with the Network window open that allowed me to click on apply an connect. -
I got my Macbook Pro from another user (different apple id) and now i'm not able to update iPhoto and iMovie. What can i do?
You need to contact Apple and transfer that computer, the serial number, into your name and your Apple ID. Then you should be able to update the included Apple Apps from the App store. No need to Re-buy them again.
Caveat to the above.
If your Mac did not originally come with Lion Preinstalled, early releases of early 2011 models and older, and originally had Snow Leopard installed the original owner should of supplied the Mac OS X System Discs with the system. If that person didn't you should order them from Apple at a small fee, and don't lose them. -
Recently updated to itunes 10.6.1, but during update it says itunes does not have a valid signature and update fails ,now older version is not able to connect to itunes store error 306. I am using windows 7.
(Apologies for butting in, wha.)
now older version is not able to connect to itunes store error 306. I am using windows 7.
If you still get the 306 after updating to 10.6.1.7, perhaps try the following user tip:
iTunes for Windows 9.0.x: Error 306 -
How do I unlock my external hard drives one has photos on them one is trying to run time machine and is not able to complete a basck up.
VK said for locked HDs and volumes at http://discussions.apple.com/thread.jspa?threadID=2329689
sudo chflags 0 /volumes/*
sudo chmod a+rx /volumes/* -
I have an ipad2 that has ios4.3.5 that I'm trying to update to iOS 6. I'm not able to update because of unidentifiable apps. I'm assuming that these are apps I tried to get but couldn't open because I needed iOS 5 or higher. These apps are still in my app store always needing updates, but I can't open or update because I don't have iOS 5. I can't delete them either because they can't be opened or aren't on my screen to hold/let wiggle/X. I need to remove these apps, but can't figure out how. Please someone tell me how
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 4: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you are updating using wifi, locate your iPad close to your router so you don't get a wifi dropout (can cause update corruption).
Cheers, Tom -
How do i delete an old iCloud account from phone when I forget my password and I'm not able to reset it because my security questions do not match?! Help!! Currently not able to update any apps or icloud info...
If your device is signed into an old ID of yours that is an earlier version of the ID you want to sign in with, do the following:
If you are using iMessage and FaceTime, make sure you are signed into these services with your current ID. If they are signed into the old ID, go to Settings>Messages>Send & Receive and Settings>FaceTime, tap the ID, sign out, then sign back in with your current ID.
Then temporarily recreate the old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. (You should not have to verify the old email account so it doesn’t matter if you no longer have access to it.) Now go to Settings>iCloud, turn off Find My iDevice and enter your current password when prompted (even though it prompts you for the password for your old ID). Then save any photo stream photos that you wish to keep to your camera roll (unless you are using iCloud Photo Library). When finished go to Settings>iCloud, tap Sign Out (or Delete Account if you are not running iOS 8) and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address back to the way it was. Now you can go to Settings>iCloud and sign back in with your current iCloud ID and password (your data will download back to your device). -
Home sharing not working after update to iTunes 12.1
recenty updated iTunes to 12.1.0.71 64 bit for windows 8.1, and home sharing no longer works with my apple tvs. i have an apple tv 2 with software 7.0.3(6917) and an apple tv 3 aalso on 7.0.3(6917). I have tried the usual troubleshooting. Restoring, restarting, reinstalling itunes, made sure all the neccessary ports are open both on my router and firewall. Still not working. I would appreciate any help.
I have similar issue and already opened another thread for it...no reply so far. So I'll give it a try in here.
I'm using a Mac Mini (Mid 2010) with 4GB RAM, Yosemite 10.10.2.
The Mac is connected by cable to a Gbit Ethernet network switch.
I hope the following drawing helps to understand the network environment:
Mac <--> Switch_1 <--> Switch_2 <--> Fire TV
Switch_1 <--> WLAN Router AVM Fritz!Box 7270 <--> 30MBit Internet connection
The Mac and the Fire TV (running AirPlay server App) are both connected by Ethernet cable, but to different switches.
No WLAN enabled on Fire TV.
The WLAN router is the DHCP server.
For sure the remote App is running on an iPad (2) which is using WLAN.
All network addresses are in same network and were provided by same DHCP server (running on WLAN router).
All my music and internet radio is coming from the Mac.
I use remote app (latest version from Appstore) on the iPad to connect to iTunes 12.0.1.26 running on my Mac.
In iTunes I selected the Fire TV as AirPlay receiver.
Fire TV is playing all music through my AV receiver.
This is working perfectly fine except one issue which exists since update to Yosemite 10.10.0.
It remained same with Yosemite 10.10.1 and 10.10.2.
My problem is that I need to enable WLAN (wireless) on my Mac since update to Yosemite.
When I disable WLAN remote app does not find my media library anymore and iTunes is unable to connect to the Fire TV.
When I re-enable WLAN, everything is working fine again.
Remember, all devices except the iPad are on a cabled 1Gbit Ethernet.
Before updating to Yosemite I did not need WLAN.
Any idea what's causing this? IP traffic routing issue?
Usually, when I disable WLAN on the Mac, it continues to run for 1 or 2 days where the iPad has no problem to find and connect to the media library.
After a while. running with WLAN disabled, my iPad is not able to "see" the iTunes media library asking me to enable home sharing.
When I check on my Mac, home sharing is enabled.
I then disable and re-enabled home sharing in iTunes and after doing so my iPads is able to "see" the iTunes media library but it cannot connect to it.
I checked routing and arp tables on the Mac but everything looked fine, routing through the Ethernet interface.
I used "fing" on the iPad to see which devices are online and "fing" on my iPad was only aware of the Mac Ethernet interface. No entry for the disabled Mac WLAN interface.
I checked on the WLAN router and ensured that both Mac interfaces have unique host names (aliases) on the router.
To be sure everything is refreshed I rebooted the router.
No change, my iPad was able to find the iTunes media library through home sharing but was unable to connect to that media library.
So I enabled WLAN on the Mac and immediately my iPad could connect to the iTunes media library.
Weird...
Only mitigation I found so far is to re-enable the WLAN on the Mac.
So I assume something is broken in Yosemite / iTunes 12 home sharing. -
I am not able to connect with Itunes Match. I constantly receive the message error 4010
I am not able to connect with Itunes Match. I constantly receive the error 4010.
I can run the general "Update iTunes Match" from the menu but cannot add individual tracks by right-clicking (control-clicking) on them the way I usually do. Then I get the 4010 error message.
Based on other posts here, I can assume the problem is not just me. -
i have a laptop mac 3 years old i did not pay the extend warranty plan, so know i can't update the iPhone 5 because thai do not accepted a update for iTunes the new version what i have to do call to apple or make repair
You need to be running Mac OS X 10.6.8 or newer to sync the iPhone 5; this may require buying a Mac OS X 10.6 DVD from the online Apple Store. OS upgrades aren't covered by the warranty.
(77198) -
I am not able to update my i pad
I am not able to update my i pad
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.0.4. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
You can no longer update to iOS 6.x, or down grade the iOS.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.htmlhttp://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and antivirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
How to Upgrade to iOS 7
The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
To upgrade using Wi-Fi:
Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
Go into the iPad's Settings.
Locate and tap "General" from the menu on the left.
The second option from the top is "Software Update". Tap this to move into the update settings.
Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
To upgrade using iTunes:
First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
Now you are ready to begin the process:
If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
After canceling the dialog box, iTunes should automatically sync with your iPad.
If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
From the iPad screen, click on the Update button.
After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
Cheers, Tom -
HT1222 I am not able to update my iPad to new version,needs any settings changes?
I am not able to update my iPad to new version,needs any settings changes?
How are you trying to update? Have you tried connecting your iPad to your computer running iTunes and update that ways? Please tell us what you have tried, what happened, and what if any, error messages you received.
-
I am not able to connect my itunes store
i am not able to view my itunes store account or download updates since last month please suggest me.....
thanksClose your iTunes,
Go to command Prompt -
(Win 7/Vista) - START>PROGRAMS>ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 n above) - START>PROGRAMS>ACCESSORIES>Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
Apple software on Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
Hi I m not able to update my iPad 2 to iOS 5. I am using windows OS, when I Connect my IPad to laptop, I tunes detects and ask for updating to iOS 5. But after some time it shows a error message saying network connection timed out and try after some time. This error message occurs every time I update. Please help me to update my iPad 2
ThanksClose your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes, sync and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US
Maybe you are looking for
-
Dark Knight Digital Copy - Transfers but doesnt play
Got my blu ray copy of Dark Knight and it came with a iTunes compatible digital copy. Used my code and synced to my iPod Nano. It shows up on the iPod but it doesnt play at all. On iTunes it plays without any sound or picture though...... Any thought
-
Can you help me update my cs5? I've got my serial number, but don't know where to enter it. My bridge is not recognizing my raw files. Thank you. Laurie Hansen [private info removed by moderator]
-
We have CS5 and my company bought another company who's design dept uses CS5.5. We already have Acrobat X so can I just upgrade our InDesign to 5.5 without needing to upgrade the entire suite? From what I see on Adobe.com the only software in our s
-
I am trying to write an app to that calls another class file but i keep getting this error: "Message.java": Error #: 300 : class Attachment not found in class Message at line 229, column 37 And this is the code where i am getting this error: public f
-
How do I syncronize and implement MANY DAQ cards?
I need to acquire 30 channels of analog data at 400 kHz scan rate (all 30 channels is one scan. It would be preferable to convert all 30 cahannels simultaneously and stream data to disk for long data collection times. Signal conditioning such as inte