Older printers and Mavericks - one solution for you?

My frustrations in getting a great older printer (LaserJet 5MP) to work are not confined to the latest Mac OS.
However, this time I have truly figured it out (by myself), and in victory, want to share with others.
CIRCUMSTANCES - MacBook Pro, up to date Mavericks, but cleanly reinstalled with my essential apps (i.e. no legacy OS builds, files, etc, this after an apparent malware attack).
Our MB Air would print wirelessly to this networked printer, but I could not get this MBP to do so, either wirelessly, networked via Ethernet, or connected directly to the printer via Ethernet.
I checked inside the following folder structure on the MB Air : HD - Library - Printers - PPD's - Contents - Resources ->
(I only did this on instinct; I'm not naturally a techie)
Comparing the Resources folders in both computers, I found LOTS of files in the folder of the computer that is printing normally (600 .gz files, 60.3 MB inside this folder). Inside the MB Pro, the folder was empty, except for a single sub-folder (en.lproj, whatever that is).
I then copied the following file over to the parallel location in the non-printing MB Pro : 'HP LaserJet 5MP.gz' - this was just a guess.
NOW, when I attempted to add a printer (System Preferences - Printers & Scanners - Add), instead of a blank window, the OS responded by calling out for additional software. For some reason, it added 237 of the .gz files, into the same folder via the internet. The printer is now recognized (not just generic either) and all is well. Both computers can now print independently. (if it added other files elsewhere in the OS software, I am not aware).
I am hopeful that this will be adaptable to YOUR particular printer situation.
I'm sure Hewlett Packard hates me for continuing to keep a circa 1995 era printer running, but this machine is very well built, and I doubt we'll ever see such a durable machine made again. Sorry HP! As long as replacement toner cartridges exist, I expect to be running this printer.
Oh, and about HP (and similar corporations making this stuff) - the website, for all the times I've attempted to use it, has been extremely consistent - it's just random nonsense, from the customer's point of view. I can find narrative in one part of the site that tells you that LaserJets are not supported under Mavericks, and yet in an adjacent location, there's an invite to download the drivers for Mavericks. "Stay away" is about the most helpful advice I could give. (it has been like this for as long as I've attempted to get help there).
Good luck - this stuff is incredibly time consuming and frustrating. Fingers crossed that you can crack the code.
Grant.

You can buy HP Jetdirect parallel print servers cheap on eBay.
Here's the model I use:
http://www.ebay.com/itm/HP-JetDirect-300X-Print-Server-J3263A-w-AC-ADAPTER-FREE- SHIPPING-/171504114667?pt=US_Print_Servers&hash=item27ee711beb

Similar Messages

I have an older MAC and need a printer for 10.8.5? Any ideas? thanks

I have an older MAC and need a printer for 10.8.5? Any ideas? thanks

Without a disc, I'd create a new administrator id and delete the old id. Erase any folders you might have created outside your home folder. Use disk utility to erase free space. One pass should be good enough for a home computer.
Robert

I wish to del one apple id and make one common for mac and i phone, please suggest

i wish to del one apple id and make one common for mac and i phone, please suggest

You cannot delete an Apple ID, you just stop using it. Understand that any apps purchased using that ID can only be updated with it. Apps are tied that ID used to purchase them. If you want to use a new ID for everything, you will need to repurchase any old apps using the new ID.

I have 2 computers. Do I have to buy 2 separate downloads for each computer? Or can I save money and buy one download for both laptops.

I have 2 computers. Do I have to buy 2 separate downloads for each computer? Or can I save money and buy one download for both laptops.

Also, downloads are for only one platform, so the answer is yes only if both computers are windows computers or both are macs. To do one each you need the boxed version.

Has anyone ever installed OWC 1.0TB Aura Solid State Drive and Envoy Storage Solution for MacBook Air 2012? Did it work out?

Has anyone ever installed OWC 1.0TB Aura Solid State Drive and Envoy Storage Solution for MacBook Air 2012? Did it work out?

Has anyone ever installed OWC 1.0TB Aura Solid State Drive and Envoy Storage Solution for MacBook Air 2012? Did it work out?

HT1430 I suddenly can.t access you tube via videos via my iPad . Tried via safari and you tube app on iPad but it says no videos and then ask me for you tube password . Never had to use a pass word

I suddenly can,t access you tube videos via my iPad. Tried safari and you tube app on iPad. I get no videos and then it asks for you tube password. Not had that before.

Thanks for that. Much more constructive than the last comment. It's only the restriction code I can't recall, not the access passcode. So I can currently access the device, just not age restricted content. Does that's make a difference? I also wondered if anyone knew how many attempts you get to try to get it right. Now tried 21 times and so far nothing bad has happened but I am concerned I'll eventually be completely locked out of the device. That doesn't seem in the spirit of things though. Surely it's foreseeable that a child could repeatedly try to guess the code so I can't see that it would be right to lock the device down completely in that circumstance, particularly if the access code is being typed in correctly every time.
Thanks

One solution for Apple TV losing connection to its iTunes Library

In 2012 I bought an Apple TV3 to let me use the AirPlay features of my New iPad with my HD TV. All worked fine and still does. Later in 2012 I subscribed to Netflix and enjoyed streaming movies to my HD TV via the Apple TV. Having had such a good experience with it so far I bought another for our bedroom TV and another for a relative, hoping they would have the same great experience with it.
Both of my Apple TV units at my house have worked flawlessly since installing them. We can start watching a Netflix movie downstairs then go upstairs and carry on where the movie left off.
At my relative's house the experience was not so flawless and has resulted in about 2 months of frustration but happily their AppleTV3 is now also working as expected. It has been quite a journey to get to this point and had a surprising solution.
I am the 'go-to' person in my family for these things so I installed the Apple TV for my relative.
My relative has a Windows XP (SP3) PC running the latest iTunes (11.0.2), a BTHomeHub 2 router, connected by WiFi to the Apple TV. The PC was connected by ethernet cable to the router. I installed the Apple TV, set up the hdmi connection to the HD TV, connected it to the WiFi network, upgraded to the latest iTunes on the PC, added the Apple ID for Home Sharing to iTunes and the Apple TV and could connect to the iTunes library on the PC, all good so far. I could play video or music or podcast or view photos from the iTunes library on the PC but after a short time (a few minutes or so), if I tried to play a different video or music track the I would get the familiar spinning icon and the Apple TV would not play the media file. Often the Apple TV would still show the contents of the iTunes library but would not play anything from it. When it was in this state it was still possible to play iTunes Trailers or Purchased content or a Youtube video or display photos from my library. This proved it was still connected to the internet and to some extent my library on the PC because it could display photos.
Initially I thought it was a WiFi problem as that was how the Apple TV was connected to the router. So as I already had a Powerline ethernet link running from the router to the TV for the Humax Freeview box for the BBC iPlayer, I ordered a small network switch to share the Powerline ethernet cable with the Apple TV. However the same drooping connection problems were apparent. I tried changing the QoS settings on the Powerline link, tried to prioritise TCP or UDP or both , but no improvement. I decided to abandon the Powerline link in case it was 'too slow', perhaps that was the issue.
I tried one of the Apple TV units from my house, where they were working fine and I got the same problem, at my relative's house it behaved like their unit, it would connect play a movie (all the way through if we let it) but after a few minutes if trying to play something else it would not play anything further. I tried their Apple TV at my house and it worked there, so the unit was not at fault.
At various times while troubleshooting these problems I have unistalled iTunes, reinstalled it, uninstalled Bonjour, reinstalled it (it comes with iTunes), searched the registry and cleaned it (Warning: do this at your own risk as you risk destabilising Windows), I have tried disabling my firewall on the PC and/or on the router, uninstalled the Antivirus / Firewall software (Norton) on the PC, I have added the Ports required for the Apple TV to my router and firewall software, I have read many, many forum posts about what has worked for other people and I tried them all in various combinations.
I decided having tried the above that the problem must be the Windows PC, so I swapped it for a few days with a laptop, connected wirelessly to the router. I had an iTunes library on the laptop so I shared it with the Apple TV and stopped iTunes running on my relative's PC. For a few days it actually worked, the Apple TV would play one movie/music track and I could select another and play it after a few minutes, a partial solution had been found except the laptop was needed elsewhere and I wanted the Windows PC to be the source for the iTunes library. I briefly considered suggesting they should buy a modern PC or Mac as their Windows PC was around 9 years old, may be that was the problem? This would have cost around £400+ and was out of the question. Fortunately I had a spare PC and I decided to swap it with the Windows PC, it was only a couple of years old and as such it must be 'better' I thought. Swapping one PC with another and transferring e-mails and documents etc. took quite a few hours but it was done. I uninstalled iTunes, reinstalled it and set up the home sharing again. This second Windows PC was running XP (SP3) and Norton 360 Firewall/Anitvirus software. I checked that after installing iTunes the Program rules in Norton were allowing the TCP and UDP communications expected by the Apple TV, I noted these were not specific ports but all TCP and all UDP communications were allowed. All of this met the recommendations that other posts had suggested. I tried it with the Apple TV but no, exactly the same problem, the iTunes library could not be found after a few minutes.
I found that if I restarted the Apple TV it would connect and play a file (movie/music etc) but if I played an iTunes trailer or just waited a minute or so then it would lose the connection. Another symptom would be when I landed on the 'Compters' icon it would tell me to 'enable home sharing on the PC with this Apple ID' , which I had already done.
If I tried playing via the Apple TV while selecting tracks from within iTunes on the PC, then sometimes the AirPlay icon was present or not present, sometimes worked and would then always not work until I restarted at least iTunes and the Apple TV, if not also the router or PC, whatever I tried it would not result in a connection between the Apple TV and the PC that would survive more than a few moniutes at a time.
Having swapped the Windows PC hosting the iTunes library with another I swapped the Apple TV again with one from my house, again same behaviour. So this suggested the problem was the BTHomeHub router as that was the only bit of hardware not exchanged. I compared its settings with the same unit at my house, I tried forwarding ports, I tried chaging the security from the default 'WPA & WPA2' to WPA or WPA2, still no solution. I tried reducing the default WiFi connection protocol from 802b/g/n to 802/b/g. I tried variations of all the other possible settings that could be changed but in the end set them to match the ones at my house. Still no solution. I considered buying an Airport Extreme or similar to link that via an ethernet cable to the router and enable it to be the WiFi access point for the Apple TV. This would have cost around £80 similar to the cost of the Apple TV itself, so was also dismissed as an idea.
I decided to restore the router to factory settings, this was done and I set up the WiFi connection again to the Apple TV, still no solution, same behaviour on the Apple TV. I decided it must be a problem with the WiFi so I tried a direct ethernet cable trailed through the house from the router to the Apple TV to eliminate the WiFi involvement, that would have to be the answer, wouldn't it? No, same problem.
I discovered some useful diagnostics along the way that are somewhat techie but worth persevering with as they could be useful for diagnosing what the problem could be. Find out on your router what the IP Address is for your computer that is hosting your iTunes library and the IP Address for your Apple TV. The IP address is essential for either device to connect with each other or the internet. The Apple TV IP address can be seen via Settings/General/Network, it has the form like '192.168.1.69' and for the PC it was '192.168.1.80', the values don't have a particular significance but the last digits after the 3rd dot will be different for each device.
On the PC (or Mac), open a Command (PC) or Terminal(Mac) prompt and try to 'ping' the Apple TV to see if you get a response
e.g.
c:\ping 192.168.1.69
or
c:\ping apple-tv
You should get a response indicating the number of milliseconds it takes for the 'ping' to be returned to the PC from the Apple TV , this will show that the PC can connect to the Apple TV, if it does not get a response then you should check that the PC and Apple TV are connected to the same network (either wired or wifi). You must be able to get a successful ping for the connection between the PC and the Apple TV to work at all.
Another diagnostic is to check the network status on the PC (or Mac)
e.g.
c:\netstat -an
This will show all the current TCP/UDP connections and also the local and remote IP addresses and ports. Look for the IP address of the Apple TV in the third column, there will be many rows returned so just concentrate on the rows with the IP addressses of the PC and the Apple TV
e.g. look for rows like the following:
TCP 192.169.1.80:3689 192.168.1.69:49123 ESTABLISHED
UDP 192.168.1.80:5353 *.*
UDP *.123 *.*
TCP Port 3689 is used by the Apple TV to communicate with iTunes for playing content. This connection is essential, there may be more than one 'established' connection to the remote Apple TV from the local PC.
UDP Port 5353 is used by the Apple Bonjour service to send multicast communications between iTunes and any iOS devices on the same network, such as the Apple TV, again it is essential.
Port 123 is used by Apple products to obtain the date and time, the UDP row above shows that any local IP Address can communicate with any remote IP address on the router's network and provide it with date and time information.
If your firewall software on the PC is blocking any of these ports then the 'netstat' command is useful to see if you need to unblock any. In my experience, this port unblocking was not necessary as when I installed iTunes, the Norton software automatically set up appropriate rules for the iTunes program, and opened the required TCP and UDP communications as iTunes needed.
Likewise, on the router itself, I have the UPnP setting enabled and this allows software like iTunes and Bonjour to traverse the router's firewall without it being necesssary to explicitly set the ports to be forwarded.
If I started the Apple TV, and ran the 'netstat -an' command over the next few minutes I could see the number of rows for the Apple TV diminish, and this was a symptom of the dropping connection problem.
Ultimately having replaced the Apple TV with another 'working' one , swapped the PC, restored the router to factory defaults, disabled the Windows or Norton firewall, tried ethernet and WiFi connection between the router and Apple TV it struck me that the only component I had not considered was the insignificant ethernet cable linking the PC to the router. This has been present since the router was installed for the original PC around 4 years ago. But surely this was how the original PC and the swapped in PC were getting to the internet quite normally and successfully? Also this was how the Apple TV was accessing the PC via WiFi then via the router through this ethernet cable, there was no way it could be the cable, cables don't allow a connection for a short time and then cause a timeout can they?. Thus, confused, and with all other avenues explored, I removed the cable between the PC and the router and enabled a WiFi connection from the PC to the router. After restarting the PC, Router and Apple TV, just to be sure, I tried the Apple TV again.
I could play some music on the Apple TV from the iTunes library, I could play it for a minute or so and then go to movies and play a movie from the iTunes library. I tried to play an iTunes trailer, some YouTube videos, these worked as usual. I then went back to the library and yes, I could play another music track or another movie. I forced the Apple TV to 'sleep' via Settings/General/Sleep Now and tried again, I woke it up and could play any music or movie from the library. Elated, I went out for meal with the family, nervously hoping throughout the meal that the solution had been found. After a couple of hours we returned, woke up the Apple TV and yes, oh yes!, it would connect with the library and play a succession of music or videos without seeing any dropped connections. Several hours later I could wake up the Apple TV again and select any content from the iTunes library on the PC and play it, finally the unit is behaving as I would expect.
This solution may not apply for all, but it worth following all of the components in the path between the Apple TV, router, computer (either PC or Mac) and the iTunes library and checking that each is able to commmunicate successfully and over a period of time reliably so that the Apple TV can perform as flawlessly as it is capable of.
Don't, as I did expect the solution to involve a complicated series of special settings of ports or communications protocol changes. Do perform a clean install of iTunes and keep it updated, do keep Firewall settings simple and let the settings be default settings, do rely on UPnP (Universal Plug and Play) on the router. Let the router select which channel it wants to use, it will select the channel with least interference...and check out that insignificant ethernet cable if you have one. It might work fine for general communications from the computer to router to the internet but it can be a source of connections dropping on the Apple TV!
My relative is now a happy Apple TV user too.

Useful to watch what is happening to the TCP/UDP connections when the Apple TV is connected to iTunes and when it is actually playing some media from iTunes and when it stops playing.
To see this, use the Network Statistics command 'netstat' from a Command prompt (Windows PC) / Terminal Window (Mac):
e.g. for Windows:
c:\netstat -an 5
This repeats the netstat command every 5 seconds, use Ctrl-C to quit the command. (Use 'netstat -h' for help with this command)
While iTunes is running there will be a number of TCP records displayed for the computer's IP address using port 3689, showing at least 3 ports in use for the Apple TV's IP address.
i.e.
TCP host_ip:3689 apple_tv_ip:49187 ESTABLISHED
TCP host_ip:3689 apple_tv_ip:49196 ESTABLISHED
TCP host_ip:3689 apple_tv_ip:49255 ESTABLISHED
When it is playing content there are more connections established, some of these rows will gradually disappear when the media file stops playing. These addional TCP records show iTunes using different ports from 3689, but only while media files are being played.
When a video file is played, (on this Windows PC at least) the iTunes host is using ports 4463 and 4464, with the Apple TV using port 7000. When playing a music track or podcast, the iTunes host is using port 4472 or 4489 and the Apple TV is using port 5000.
When the media is playing, the fourth column returned by the 'netstat -an 5' command : 'State' shows as 'ESTABLISHED' and shortly after the media file is stopped playing it shows as 'TIME_WAIT' until the record disappears after a minute or so.

One SOLUTION for "self assigned IP address"

Hello there, dealing with the nasty issue of "self assigned IP address" has been my latest two days nightmare, I tried lots and lots of solutions I read in forums here and there without getting to a point.
I started this post because I want to post here a solution that really worked for me and I haven't seen it posted over the web.
I don't remember where but I saw the comment that WEP encryption by the router is not very mac compatible as opposed to WPA. So a while ago when I entered my router home screen (Thomson TG585 v7) I saw the option to enable WPA-PSK encryption and went for it, I can tell you it inmediatelly got me online and till now my airport wireless conection is working perfectly.
I'm not any mac/web guru and maybe I'm stepping some technical details but I want to share this tip with all of you because I know it can be a really nasty problem that one of the gat dam "self assigned IP address" and this may help somebody else. ;-)
Best regards
Luis Erantzcani

Great tip Luis, thanks!

One solution for the white screen of the dead on

I bought a creative ZEN with the white screen. Then return this to the shop and then another ZEN with with screen of the dead but I found this solution:
http://www.youtube.com/watch?v=a8g0sh7pc54
It is important that the screen turn off, so it is necessarily for example that play some song.
I try all things that they says in this forum but only this is OK.
Hablo espa?ol por si alguno necesita ayuda en este idioma.

because it works for the majority and not the minority doesnt mean its good it means there are some issues which need sorted for individuals.
and my iphone is not jailbroken it has all original apple software on just had to circumvent the system to get it back to a stable working condition before the fantastic update to ios6 and i have also updated 4 devices 2 have had problems and 2 have not so figure that out. Apple should at least have admit there are issues with certain hardware and support there customers as a unhappy customer will allways remember the bad bits and not the good bits and you keep refering to the millions it works for what about the ones that it doesnt or are they not important or is your money better then mine i dont think so some how all i ask for is decent customer service that will resolve my issue but im guessing thats far to hard for you to comprehend and my phone is 2 month out of warranty which is why most of us are here i would think or we would all be at the apple store.

I am setting up a time machine backup to a external Hard drive. I want to backup by Mac book Pro running OSX 10.8.5. I would like to Partition the disk and use one partition for Time machine backups and the other for my Lightroom backups. How to do this?

I want to create a two partition disk. One partition for time machine, the other for Lightroom backup. Currently Time Machine is using the entire drive and it is doing the intial encryption and is about 29% complete after two days. I've decided that I want to turn encryption off and partition the disk. So I do I start over?

With the external drive attached, open Finder>Applications>Utilities>Disk Utility. Select the external drive from the list in the left side panel of the DU window. In the main window panel, click Partition in the buttons top center of that panel.
Select the number of partitions you want and adjust their sizes.
For the first partition, click to highlight the partition, then select the format, Mac OS Extended (Journaled) and then the partition table as GUID [both of those are the defaults]. Click Apply and it will ask to confirm and erase and format that partion...oh, give the partition a name, like Backup.
Then repeat those steps for the second partition..and remember to name it...something like Lightroom.
Close Disk Utilitty and you are ready to send TM to the one partition, and do your backup of Lightroom to the second partition.

Virtualbox 4 - One solution for Installing Windows XP

This post refers to running Windows XP in the virtualization program Virtualbox 4 on OS X.6 (snow leopard).
This is a tip for those having difficulty in installing Windows XP from a CD/DVD in Virtualbox 4 which was released early 2011. This method uses a disc image file to load the OS when you cannot recognize the installation CD/DVD. This could be applied to installing other OS systems in Virtualbox 4 but I have only tested WinXP.
Once you download Virtualbox 4 and install the program, you will need install Windows XP (or whatever OS you choose). If you are having difficulty in installing the operating system from a CD/DVD drive, do the following:
1) shut down Virtualbox
2) open up "Disk Utility" (Applications->Utilities->Disk Utility or Finder->Go->Utilities->Disk Utility)
3) In the left hand panel find the drive with the OS DVD/CD and click it once to select
4) now on the top menu bar click the "New Image" icon
5) enter a file name for the image file or leave as is. In the "image format" pulldown bar select DVD/CD master, then hit enter
6) the new image file should save as a .cdr file (similar to a .iso file)
7) Open up Vitrtualbox select the partition where you want to install the OS, double click and select the .cdr file that you created.
Note: You may have to delete the partition and create it again if you had tried to install the OS from the CD/DVD and failed the first time.

TYVM
This solution worked beautifully! I would never have puzzled that out on my own. Much(!) appreciated

One Solution for Fixing Slow Wireless Connection

Quick and easy solution for slow wireless connection.
My hardwired PC connection was working fine over FIOS, but my wireless connection through my Macbook Pro was soooo slowwww, although the machine itself was fine. Pages would take forever to appear, then finally sort of pop up. Didn't really seem to be a Mac problem, just a connection problem.
After searching forever to find a fix, I found a quick & easy solution that works at least for now: change your DNS address.
I'm not a techie so I don't know ALL of the implications of doing this, but in desperation, it has worked for me and I think at no risk to your network or machine. Changing my DNS address has made my connection blazing fast and relieved many weeks of frustration.
HOW: I can only share how to change on a Mac. (Please chime in if you can give directions for PC. ) Just go to this Apple support page, which will outline exactly how to do it. I used 4.2.2.2, I think you can also use 4.2.2.1 as the DNS address. http://support.apple.com/kb/TS2002
Other resources I've found follow:
(specific to FIOS): http://www.stationstops.com/2008/04/16/high-speed-internet-3-tips-to-optimize-your-verizon-fios-broa...
(Specific for Mac): http://forums.macrumors.com/showthread.php?t=358919
Maybe this is a commonly-known fix but it wasn't for me, so hopefully it will help some of the other less-than-technical people out there. Good luck!

Actually this is a common problem with Mac OSX (http://rubyisbeautiful.com/2008/2/8/osx-dns-fix-update) and how it does DNS lookups and pertains to routers that provide the internal gateway (i.e. 192.168.1.1) as the DNS address which is what the ActionTec does by default.
You can change that at the router level to either push out Verizon's dns that the router then uses or any other open dns server. I had to do this a long time ago for some of the OS X boxes on my network.

I did not find a problem with any solution for my 3gs phone What is the solution for you!!

IPhone 3gs is open internationally and does not accept activation after the
update oi5 brother..
You may peace and God's mercy and blessings
The problem in short was not able to activate the device 3gs
IPhone open. Not locked
Tried by the Wi-Fi and through iTunes I could not
According to iTunes SIM message is found in several segments of tried and I could not activate
Is there a solution for the operation of the device or restore the previous version ???????
What is the solution

What is the solution

Making the Aspire One work for you as a desktop.

Heres a photo of how I am using my new Aspire One as a desktop. I decided to get rid of my Acer Aspire x1200 yesterday simply because it draws too much power and can make some heat in the room during the summer time. Note : I still need to buy an external DVD Drive to install programs but I am fine for now.
All you need for basic functionality are the following :
USB Keyboard
USB Mouse
Monitor
Just plug these items in and youre ready to go as a desktop! In fact its so quiet and energy efficient that for gaming ive turned to game consoles from now on.(Of course, the system doesnt choke for casual gaming)
*******DISCLAIMER********
I am not an employee of BBY in any shape or form. All information presented in my replies or postings is my own opinion. It is up to you , the end user to determine the ultimate validity of any information presented on these forums.

The general path to launching a career in programming is:
-- math & science in high school. Written and verbal communication are important skills. Unfortunately, English classes spend too much time analyzing obscure authors and not enough time teaching writing skills in my observation.
-- four years of college.
In the mean time, your local library is likely to have many books on computers.
Investigate:
-- Creating a web page. Google Sites allows you to create a site for free. You should be able to get involved with your school "newspaper" media efforts.
-- Graphic tools such as photoshop or Gimp
-- Text processing, spreadsheets, and presentation software. i.e. Office or Open Office
-- Unix and Unix command line i.e. Terminal
I recommend Phython as a programming language. Phython is powerful but approachable. About any Programming language will do.
Learning Python by Mark Lutz
http://www.amazon.com/Learning-Python-Edition-Mark-Lutz/dp/B003R4ZIG2/ref=sr_1_3 ?ie=UTF8&qid=1343667324&sr=8-3&keywords=Learning++Python+by+Mark+Lutz
The second edition is a total bargain if you need to go for low cost.
Once you get your started with Python, there are a lot of standard programs for doing more complex projects. Here is the link:
http://www.doughellmann.com/PyMOTW/
Robert

"SCR24 style lid with window function".And only one adaptor for DK48

I recently purchased the product "SCR24 style lid with window function". The contents of the box is the adapter for the "dock" DK48, the problem that I find is that I have two DK48 and only one adapter. Is official that the Sony's answer is:" every time you want to charge, remove from the dock and put on the other. There is no spare part, cant purchase it separately"?.

I've searched the places I use for parts and cases etc but no adaptors - The only thing I can think of doing is to buy a magnetic charging cable and use that
For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled. Richard P. Feynman

Older printers and Mavericks - one solution for you?

Similar Messages

Maybe you are looking for