Older SB Live switching from 4 to 2 speake

Hi, Just recently my card is switching from 4 speakers to 2 when I load certain games or software. I then have to bring up audiohq and switch back to the 4 speaker setting. This is fine for days on end and then something I load kicks it back to 2 speakers again. If anyone else has solved this problem can they please advise. Thanx.

I am experiencing this same problem.  When switching to the 5ghz only radio it reports the channel is invalid when I attempt to update.  Whether I choose automatic or any other channel it keeps saying it is invalid.  I am running the latest updates on my macbook pro and airport utility 6.0.  My airport express is version 7.6.1.  It is being run in bridge mode.  I also have a time capsule in bridge mode as well.
I am still working on this.

Similar Messages

  • Switching from headphones to external speaker

    Is there a way to switch from headphones to external speaker without having to unplug and replug the devices? Something practical and fast?

    Perhaps something like this?

  • Hi, how can I limit the number of emails I can see on my iPhone 5. Every time in delete one and older email gets added from my live.co.uk account (where I want to keep my 2500 emails) I just don't want many on my phone. Thanks

    Hi, how can I limit the number of emails I can see on my iPhone 5. Every time in delete one and older email gets added from my live.co.uk account (where I want to keep my 2500 emails) I just don't want many on my phone. Thanks

    You can't. Why on earth would you attempt to manage 2500 emails with setting up a folder structure or some means of doing so? Simply keeping them in an single inbox is not realistic, no matter what email client you use.

  • Dreamweaver cs6 crashes when switching from design to live view

    dreamweaver cs6 crashes when switching from design to live view

    read my reply
    Date: Thu, 30 May 2013 20:27:49 -0700
    From: [email protected]
    To: [email protected]
    Subject: dreamweaver cs6 crashes when switching from design to live view
        Re: dreamweaver cs6 crashes when switching from design to live view
        created by Preran in Dreamweaver - View the full discussion
    Hi,
    Can you try the solutions mentioned in this document?
    http://helpx.adobe.com/dreamweaver/kb/crash-live-view-dreamweaver-cs5. html
    Thanks,
    Preran
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5367198#5367198
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5367198#5367198
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5367198#5367198. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Dreamweaver by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Is it possible to switch from the Lion operating system to an older Snow Leopard operating system?

    I think I have to switch from my OSX 10.7.5 to an older system...am just curious what it would take to go to an older operating system and how much hassle it would be?  Any advice and info would be appreciated!  thanks...

    raymoo wrote:
    I think I have to switch from my OSX 10.7.5 to an older system...
    If your Mac Shipped with Lion OS X 10.7 you cannot install an earlier OS.
    Installing an Earlier Version of OS X

  • Switched from Blackberrry to iphone.  I can't highlight phone numbers in contact notes and make calls from that number, how do I make a phone number "live" ?

    How do I make email addresses and phone numbers in the notes section of contacts, "live"?  I could run curser over number in Blackberry and could intiate call or email by clicking on it.  I have some of those "live", but most are not.  How can I change to "live"?

    If I go to my notes app ( not a note in a contact) and I add a phone number and tap done the number becomes live.  However if I then copy the live number from the notes app and try and paste it into the notes field in a contact it is no longer live.  Weird huh

  • I am switching from a pc to mac and want to know how I go about transferring files from one to the other.  There is a chance that I will have to hand my pc back before I receive my MacBook so I will need to transfer on to some sort of external hard drive.

    I am switching from an acer laptop to a MacBook Pro.  I may have to hand in my laptop before I receive my new MacBook. What is the best way to back up my files so that I can transfer them to my MacBook.  I cloud cannot be installed on my laptop because it uses a version of windows that is older and doesn't support it.  Hope someone can help.

    Connect a blank powered external drive to the PC.
    Right click on the Disk in the File manager and choose format: exFAT 
    (if it's a XP machine, first install exFAT from Microsoft and reboot)
    navigate to your user account folders on the PC and drag and drop copy (or copy and paste) to the external drive.
    (if a program has your files, then export them out first)
    Hook up the drive to the Mac, and transfer files to the desktop or to their same appropritate folders.
    Import photo's into iPhoto program, import music into iTunes etc and they will manage those files.
    You can continue to use the external exFAT drive between Mac's and PC's
    Do not format the drive NTFS or FAT, NTFS can't be written too by the Mac and FAT can't hold over 4GB sized files.
    If you format exFAT on the Mac, it likely won't work correctly on the  PC.
    "Migration" type programs are a utter waste of time and effort between PC's and Mac's for the fact that only certain files (and no programs or anything else) will work between them, also it's a hassle and takes too long. So don't even bother with it.

  • Data network errors when manually switching from 3g to 2g

    Hi everyone,
    Apologies if this has been posted before but im running out of ideas! - Got my iphone 4 a couple of weeks ago and have noticed a rather irritating problem with it. For some reason, if i manually switch from 3g to 2g the data connection drops.. I get 'cannot activate cellular data network' errors and i have to toggle airplane mode on/off to reset the connection. Is this a network issue? - I live in London and am with Vodafone... Their tech support are useless as all they suggest is resetting the phone or getting it replaced. Its my third handset in 2 weeks and im getting close to calling it a day and sending the phone back to Apple. Anyone out there in a similar situation? - Advice??

    Bump
    So no-one has suffered this issue? - Not even fellow vodafone uk users?

  • I have switched from PC to Mac how do i use my windows version  of adobe photoshop CS3 on my MAC?

    i have switched from PC to Mac how do i use my windows version  of adobe photoshop CS3 on my MAC?

    rebel1568,
    All Photoshop versions through CS6 came with platform-specific licenses, either Windows or PC.  You could get a cross-grade of platform swap at a nominal cost but not for older versions, only for whatever Photoshop versions was current at the time.
    CS3 is totally out of the upgrade or cross-grade loop.  You'd have to buy a new license for CS6 Mac or subscribe to Photoshop CC, as Trevor points out.
    Curt Y is correct in that CS2 will not run on current Mac-Intel machines.  You would need a used Mac G5 or G4 with a PowerPC (IBM) CPU, which have been obsolete since mid 2006.
    Of course, you could run your Windows  on your Mac if you installed and ran BootCamp or Parallells.

  • Why do I have to switch from Windows Phone to Andr...

    Why do I have to switch from Windows Phone to Android?
    [September 30, 2014]
    This year all my friends with Windows Phone (WP) had switched to Android. Why? The Apps. I continued with WP until now because the OS is very cool (particularly the 8.1 desktop) and because I love Nokia Phones. And the new 830 and 930 models look great.
    But I will buy a new Fuji X30 Camera, I need the Wifi remote app for some shoots,  I have no choice
    Now, I will give a list of reasons my friends left WP because lack or applications, maybe somebody at Microsoft is listening and can revert this tendency.
    1. Bank Applications (Bancolombia APP)
    2. Giro D’Italia app from La gazzetta dello sport.
    3. Stereopinic Concert app.
    4. General Motors - Chevrolet navigation/location app.
    Another annoying thing with Nokia phones in emerging markets is they don’t distribute all the accessories (headphones, wireless chargers, cases), so you have to buy them from another country make them expensive. I even met three months ago the commercial leader for Nokia here in Colombia, a group of people mentioned this, but nothing has changed since then. The updates came very late and right now I’m not able to use Cortana
    I hope Microsoft starts investing hard on apps and identify that little temporal applications for just one week or month (sport events/concerts) and start to create mechanisms to get things done. They just can’t waste the 6’000.000 consumers in US and the 10% share market in some countries in Europe and in emerging markets.

    I don't endorse any mobile phone brand nor receive any free stuff from them. Neither did I advertise anything. It was rather a recommendation if the starter of this thread would like ot purchase an Android phone. Censorship won't help to sell any more Lumia phones.
    I cannot blame anybody who's about to purchase an Android phone. Being a Windows Mobile & Phone user since 2006 I've seen those strategic mistakes Microsoft has made when the 1st and the 2nd generation of Windows Phones were released (the price of developer account etc. etc.). It's very hard to mend those things afterwards but I sincerely hope it won't be impossible.
    I'm blessed that I live in FInland because Nokia has always been considered as a Finnish mobile brand and therefore there are all those (well, almost all) necessary apps available for Windows Phone. IMO the best Nokia app has been Here Transit. I really don't need Here Drive+ because they don't bother to include speed cams and line assistance to their app. Just take a look at Navigation Europe and there you have the best possible navigation app for Windows Phone. Waze is also great and it's free. Hmm, I guess that sentence will be censored because I recommended something
    I've been quite pleased with the latest Windows Phones. They haven't crashed like my Dell Venue Pro did (first Windows Phone ever) or like my Android phone, tablet and TV box. But in order to increase the market share  of Windows Phones there are two ways:
    1) good (amount of) apps, great hardware and/or
    2) double booting phone where it's possible to choose whether to boot to Android or to Windows Phone. I'd love to have that kinda phone with the goods described in 1)
    Moderator's Note: Discussing or complaining about moderator actions on the forum is not allowed. If you feel that your posts have been moderated unfairly, please contact our Community Manager via private message.

  • Dreamweaver CC crashes when switching from code view to design view

    I am experiencing a recent problem with a file I am currently working. When I switch from code view to design view Dreamweaver crashes and requests a shut down. Other files seem to work without a problem. This particular files has 3 cascading EdgeAnimation CC files that are selected by media queries. I can test the page online without a problem but not in design or live view.

    Since your new page didn't crash, this leads me to believe that you have some critical errors and/or conflicts in your other page(s).
    Try running your code through the W3C validation tools. 
    CSS - http://jigsaw.w3.org/css-validator/
    HTML - http://validator.w3.org/
    Also debug JavaScript. 
    JavaScript - http://www.jslint.com/
    Nancy O.

  • Taking a stab at live help from a pro - disk volume structures

    I'm taking a stab at getting some live help on an a 1-month old iMac 24". I'm using my Mac mini right now because the imac is undergoing a TechTool Deluxe Surface Scan at the moment.
    Specs:
    1 month old Intel iMac 24 2 GB RAM 500GB Seagate HD...
    Everything's been fine. I added a firewire 800 external 500GB HD the first week, bought the registered version of Superduper, and have been making bootable images since. They work fine and the iMac is booted from it as we speak.
    System froze today quitting Firefox I believe. Had to manually boot with the power switch. Got grey screen, spinning circle (NOT the colored one), nothing else.
    Booted to OS X startup disk, ran disk utility, got error on disk repair. (Sorry, I don't remember what it was, but I don't think you'll need it after you hear the rest of the story).
    Booted to external Firewire 800 drive, ran disk utility again, same error, wouldn't fix it.
    I have Applecare on it, put Techtool Deluxe CD in, ran all the test except Surface Scan, everything passed except Volume Structure.
    Told it to repair, confirmed it, Wait a few minutes and Techtool Deluxe program acts like it's working, seems to unmount the internal HD, and just quits with no error message.
    bring up disk utility, same error when disk repair tried.
    windowsrefugee takes deep breath
    Now I reran TTD with Surface Scan checked, it's half-way through with no errors.
    Keep in mind, the only problem reported by TTD is with Volume Structure but it CAN'T fix it.
    Now, while it's in the middle of a surface scan that's looking good, here's my critical decision path question to any late-night guru's out there:
    Should I wait til morning and call Applecare, or download Disk Warrior for $99 and fix it myself (I'm new to Macs but a DOS and Windows old-timer with a high level of expertise).
    I'm boiled it down to those 2 options, simply because I don't think there is anything physically wrong with the HD, based on disk utility AND TTD telling me it's a volume structure problem (that neither one can fix).
    Plus, something tells me Disk Warrior is gonna come in real handy sooner or later (looks like sooner to me
    Do I have this right? What are the chances there is nothing physically wrong with the HD and what are the chances of Applecare fixing it over the phone without me having to take it to repair shop (or get a home visit if they do that-which is gonna be a hassle if I have to take in to shop as I'm disabled.
    windowsrefugee inserts a big PERIOD and thanks anyone in advance for their help.
    PS---I love the iMac, my Mac mini, OS X and all things Apple. My MS-based OS machines strewn all over the shop are getting very lonely for human interaction, but they're not getting any from me.

    nothing wrong with HD.
    I 'd suspect the third party applications. If you have the time and energy why not do a clean install and see what happens. You could run Apple Disk Utility to check that HD.
    One thing in the Mac world is always check version and compatibilty with the OS system version you are running. I've run Macs since 1986 and don't use any sort of Disk Utility. No sense in it. I've owned all the ones you mentioned and still waiting for the DEFINITIVE FIX.

  • Switching from FCP7 to CS6! Two BIG questions I can't figure out...

    Hello!
    So I'm running CS6.01 on my new 27" iMac running OS 10.6.8. I'm excited to be transitioning over to CS6 after the last 6 or 7 years using Final Cut Pro. But I don't have time to mess around as I'm in the middle of projects so here are my 2 main questions right off the bat:
    First I should say that I edit AVCHD footage shot from Panasonic HMC150's. I shoot Weddings. About 35-40/year. In FCP, my workflow was...shoot EVERYTHING at 720p60 and TRANSCODE it in FCP to ProRes Proxy. Then I'd CONFORM it to 23.98 (using Cinema Tools which takes all of about 30 seconds to do 400 clips) so that it was all in slow-mo looking smooth and beautiful. Then, I'd drop it all on the timeline and edit. Most clips I need in slow-mo but the ones I don't (eg. the Ceremony) I just speed up 250% and it's full speed. Then at the end of editing I'd batch capture and re-transcode to ProRes 422 and I'm done. It all looks great.
    Here's the important thing:
    I edit on a 23.98fps timeline that way it maintains a bit of the film-stuttery look instead of the video/soap-opera look of 60fps footage and also it naturally has everything at 40% smooth slow-mo. I dont want that video/soap opera look that I would get if I edited my 60p footage on a 60p timeline! This is important to me.
    1) I know with CS6 I don't "have" to transcode, but I can just ingest and edit the AVCHD files natively, right? Well, okay, but if I do that will dropping those 60p clips on a 23.98fps timeline give me the same look I got when I use to conform the footage first? Specifically is it just as smooth to just change the speed of a 60p clip by 40% and drop it on a 24p timeline? And what about the stuff I want at full speed...if I drop that 60p footage right on the timeline and don't speed it up it will be full speed but will it look the same as my conformed footage looked when sped up in FCP? Please elaborate for me.
    2) Audio. When I bring in audio clips from my 2 cameras each track has 2 separate audio feeds (eg. 2 wireless mics, a shotgun mic, an internal mic). CS6 brings them in on one track. I read up where I need to "Modify the clips" and adjust the Audio Channels so that there are 2 tracks. Then I'm guessing I just make one track the left track and one the right? This seems to work and makes a separate track that is balanced to the center and has each of the 4 channels as its own separate adjustable track. Am I doing that right? And more importantly...my real question...if I'm scrubbing thru the timeline and I double click on one of the audio tracks to bring up the waveform and edit, sometimes it doesn't come up where I stopped in the timeline. Unless the clips are linked. But don't I have to unlink them to edit them individually? So how do I do this where I can be in the timeline, watching the video and when I hear something I want to adjust, I stop the video and quickly access the individual track (eg. one of the wireless mics) to make the adjustments?
    Hope my questions make sense. Thanks SO much in advance for all your help! It took me like 20 minutes to figure out how to post a question but now that I've done it I'm very excited that I've got it out there and hopefully I'll get past my current workflow roadblocks. Thank you!!!!!!!

    Jim Simon wrote:
    I'd recommend a different work flow.  Shoot what you want at full speed in 720p/24.  Shoot what you want in slow motion at 720p/60...
    I would respectfully disagree with Jim's statement and endorse the OP's technique of shooting at 60 fps for purposes of playback at both normal speed and slow motion at 24 fps.
    I think the more creative choices you give yourself in post the better.
    Since you (DMH79) are using the same footage for both normal speed and slow motion playback, I think your way is definitely the way to go as long as you are happy with the resolution.
    Even if you were not using the same clips at different speeds, I would still disagree with the opinion that you should be able to predict in advance which shots from a hectic live action event such as a wedding you will want to use in slow motion. In fact, I would go so far as to say that it would be impossible, no matter how easy it is to switch modes.
    Given that slow motion is a reasonable priority for you, I think there is much less to be gained by shooting at 24 fps for clips that you might use at normal speed than by giving yourself the option of both normal speed and slow motion with a 60 fps recording. (To me the bigger tradeoff is not being able to shoot 1080p at 60 fps, which I think applies to your HMC150.)
    I love the look of 24p and will shoot that way for scripted work or if I am absolutely certain that I won't want to use a single shot in slow motion, but for many live events, my preference is to shoot at 720p60, shutter angle 180, for eventual output at 30 fps. I edit in a 60 fps timeline in Premiere, but I export at 30 fps. I find that exporting at 30 fps in combination with the 1/120 shutter speed removes much of the soap opera look (a great description, by the way), but there is no jerkiness in normal speed clips because 30 is exactly half of 60. Media Encoder simply removes every other frame during export. Yet, this allows me to drop any clip to 50% speed and achieve perfectly matched, silky smooth slow motion.
    You probably prefer the 40% speed slow motion and added stutter of 24 fps, but regardless, if you do find that controlling the speed via Speed/Duration is equal in quality to conforming, you may want to consider cutting in a 60 fps timeline and giving yourself the option to export at either 24 or 30 fps.
    Your last post on this topic was from a few months ago. I also switched from FCP7 and would be very curious to know what you have discovered!

  • Video switching from interlace to progressive on render

    We have a video 29.97 1920x1080i which we are running dynamic linked through after effects, and when we render the video out in premiere it is switching from interlace to progressive.
    When the video, in the dynamic link is left un-rendered, we can see the fields in the video, they only disappear after render.
    We have tried rendering into several different codecs, ProRes 422 (HQ) being our preferred codec.
    Has anyone else experienced something similar?

    The issue is present, even on our external monitors. I just had a chat with customer support, it offered little help:
      Ankit Chillar: Please elaborate the issue you are facing.
      Jack Savage: We have interlace media, which we are dynamic linking through after effects, and back in premiere, before we render the clip we can see that it is still interlace, but as soon as we render it, no matter what the codec, it renders into progressive
      Ankit Chillar: What is the version of Premiere Pro and after effects are you using?
      Jack Savage: cc 2014.2
      Ankit Chillar: Hi, Checked this information for you
      Ankit Chillar: After Effects renders the video frame by frame so if you send a project from AE to Premiere then the sequence would be progressive by design and ca not be changed to interlaced
      Jack Savage: why is it not rendering inside of premiere?
      Jack Savage: not using premieres render engine
      Ankit Chillar: because Premiere will treat the file as a uncompressed media file and render it as it is.
      Jack Savage: I would like premiere to operate the same way the AE render engine does, giving me an option to choose the field order.
      Ankit Chillar: I am afraid that is not how the application is designed, If you have suggestions for any improvement or feature you can register your suggestions on following link :0186602810
      Ankit Chillar: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
      Jack Savage: we can force it into interlace by changing the setting in modify, is there a way to make that the default setting when using dynamic link projects?
      info: Your chat transcript will be sent to [email protected] at the end of your chat.
      Ankit Chillar: No sir, there is no workflow to do that, However a workaround might be possible for that you can post the query on our community forums. The support staff on forums as well as many of our active professional users might help you with the workflow.
      Jack Savage: ok thanks
      Ankit Chillar: Thank you for contacting Adobe. Good Bye.

  • Switching from Final Cut to Premier

    Hey. Just switched from Final Cut Pro to Premiere. I've followed the instructions regarding converting project with XML file.
    now i can open the project but all files are not connected. for some reason Premier can't locate the files.
    Maybe it's because of the files type? (Apple ProRes 422 HQ, and MOV)
    Generally, What it a good format to convert from MOV files i created with nikon DSLR before starting a Premier project?
    Please save my projects. Thank you!

    Yael,
    PrPro will go through MOV files without any difficulty. My standard footage is MOV from Panny GH3 & Nikon D600. Don't worry about transcoding, or worry about the ProRes & MOV files on the same timeline. At the same frame res/rate they'll coexist just fine.
    There is a definite difference between hardware needs and what so many seem to think should work. For all the hype about USB3 being just as good as any other external connection ... some USB3 drives on some system's CAN sustain ... a burst ... at the speed claimed. That's ok for much work, but not at all for video. It's SUSTAINED throughput "live" on any particular system with its internal bus & other settings/capabilities and the drive's actual sustained read/write speeds & cache capabilities. The Hardware Forum has a site recommended off it, the Tweaker's Page. Here: Tweakers Page
    They have several long articles on drive and asset layout/assignments. Including the results of testing various layouts, as EVERYTHING there is from testing on real machines with their own project files which are heavy effects loaded things that rag the crap out of all systems while another part of their Benchmark files monitors computer hardware usage. There's not the surmise or "I just know how this works" ... what they report is hard data. USB3 just can't sustain the read/write speeds for anything but straight reading of some codecs off disc so there's some usability, as I've learned ... one can say have footage on a very fast usb3 flash drive connected directly into a USB3 port and get adequate read-speeds off it. Or do exports to a USB3 drive, which is again a one-way "communication". Other than that, it's internal fast drives (no "green" drives need apply) such as at least 7500rpm if not 10,000rpm or SSD drives ... or RAID's of say 4 or 5 3TB (or four) drives, which in RAID 0 can actually handle all but system/program files for most things.
    Basically, you want to avoid road-blocks & choke-points, places where your data & program/system needs bang into each other and have to wait a while. If you make at least a decent start on that, the type of codec isn't much of a problem. Especially a 1080 MOV ... that ain't nothin'. Think about what a 6k LOG file does to a system ... 
    Neil

Maybe you are looking for