Older (tiger) cd photo library shows no pics when opened in iPhoto 11 (Mt. Lion)

older (tiger) cd photo library shows no pics when opened in iPhoto 11 (Mt. Lion) how do i get to view those pics ?...thanx

That library was created by iPhoto via Share ➙ Burn menu, correct? It's old enough that you may have to drag that library to the desktop and open it with the Finder. Then drag the subfolders from the Originals folder into your open iPhoto 9 library window to import.
OT

Similar Messages

Photo Gallery shows error message when opening and closes right after it

Hi,
I have Photo Gallery installed on my computer and my photos are in an external hard drive. At the beginning worked well. But today I tried opening Photo Gallery and it shows an error only giving you the option to click "Accept". After you accept
the error, Photo Gallery closes.
The error goes as follows:
"One or more folders included in Photo Gallery is offline and is preventing Photo Gallery from starting.
Either remove offline folders from Photo Gallery using Windows Explorer, or make sure that all folders are inline and try starting Photo Gallery again"
Why did this happen and how can I fix this, I tried repairing and uninstall/reinstall Windows Essentials and it didn't work.
Help please!, thanks!

Hi,
Consider Windows photo gallery is part of Windows Essentials, we have a better forum to seek help for problems related with that:
Windows Essentials
Additional information about Photo Gallery:
Photo Gallery Help Page
Thank you for your understanding.
Best regards
Michael Shao
TechNet Community Support

HT201317 My photostream in windows 7 PC does not shows any pic. when i click on slide show it start showing me slide shows of pic but when i try to copy files i cant do as no photo is viewd in list mode. This problem has arised since IOS is updated.

My photostream in windows 7 PC does not shows any pic. when i click on slide show it start showing me slide shows of pic but when i try to copy files i cant do as no photo is viewd in list mode. This problem has arised since IOS is updated.I reinstalled my icloud and checked if icloud sharing is ON. I can see pic in my photo stream in PC only in slide show mode. While in list mode it shows pics before i actually click on photostream folder. My phone memory is out becose of bunch of photoes. How do i copy my photostream photoes.

Hi all. I can’t tell you how to solve your iCloud 3.x issues. Heck, I don’t think they’re even solvable.
But if you had a previous version of iCloud that was working correctly then I can definitely tell you how to solve the “iCloud Photo Stream is not syncing correctly to my Windows 7 PC” problem. …without even a re-boot.
Log out of iCloud 3.0 and uninstall it.
Open My Computer and then open your C:\ drive. Go to Tools/Folder Options and click on the View tab. Select the “Show hidden…” radio button and click on OK.
Open the Users folder.
Open your user folder
Open ProgramData (previously hidden folder)
Open the Apple folder – not the Apple Computer folder.
Open the Installer Cache folder
In Details view sort on Name
Open the folder for the newest entry for iCloud Control Panel 2.x – probably 2.1.2.8 dated 4/25/2013
Right click on iCloud64.msi and select Install.
When finished, the synching between iCloud and your PC will be back to working perfectly as before the 3.0 fiasco. The pictures will be synched to the same Photostream folder as before the “upgrade”. Now all you need to do is wait until Apple/Microsoft get this thing fixed and working before you try the 3.x upgrade again.
I think the iCloud 3.0 software was written by the same folks who wrote healthcare.gov with the main difference being that healthcare.gov might eventually be made to work.
For those of you who hate to go backwards, think of it as attacking to the rear. Which would you rather have, the frustration of no synching or everything working on an older version?
Good luck…

Photo Library showing up on iPhone 3GS???

I've read through a few posts regarding deleting images, albums, etc and resyncing.
But the main issue I've been having is that through iPhoto I have a few albums
some with video that I'm able to sync over into my iPhone 3Gs but the Photo Library continues to show up and I can't seem to find a way to keep this from not syncing into my photo albums as it seems to show all the images I already have on the iPhone.
Can someone tell me how not to have the photo library showing up. It never did before.
I'm syncing through iPhoto, and also did through image capture.
much appreciate the feedback ~A~

Gotcha!
What I ended up doing was syncing through image capture and choosing the folder of which to sync the images from.
In image capture it doesn't duplicate the named folder, but brings it in as renamed as "photo library".
What's odd is that it doesn't import the folder as named.
Only when syncing in iPhoto does it keep the named folder, but also brings along the photo library.
So there's little means of flexibility when it comes to organizing images with the iPhone software.
Are there any 3rd party software programs that anyone is using to sort images on their iPhone? Curious
~A~

HT1937 I have installed an app : Birdfield guide in my iPhone 4. But the app is not working after installation. It shows black screen when opened

I have installed an app : Birdfield guide in my iPhone 4. But the app is not working after installation. It shows black screen when opened. I need suggestions to make it work or the reasons for not working.

Yes TeeKnows, try deleting it and download it again. After finished installation if still shows black screen delete it out off 'running apps' by double tapping the home button and swipe it off. If still shows black screen then try fully turning off your iPad (holding the sleep button) and turn back on again.
I hope I helped
thanks
Lydia

IPhone photo library shows black, but it shows the number of pics in it

Hello,
I have a problem with Photo Library on my iphone4.
It shows the number of photos contained in the Library, but when I choose the folder, it shows black.
This happened after iTunes automatically synced with my iPhone without my wish or knowledge. During the sync, I saw it started deleting images, so I immediately stopped it. But maybe it was too late???
The reason I have my pics in the library was that I had to empty my pictures folder on my PC, so I moved my pics to my iPhone. I guess that was a mistake...
Does anyone know if there is any way for me to be able to see my photos again?
Thanks for your attention!

They could be gone unfortunately. You might try quitting the photos app then starting it again.
Go to the Home screen and double click the Home button. That will reveal the row of recently used apps at the bottom of the screen. Tap and hold on the app in question until it wiggles and displays a minus sign. Tap the minus sign to actually quit the app. Then tap anywhere on the screen above that bottom row to return the screen to normal. Then restart the app and see if it works normally.
If that doesn't work try quitting it again but reset your iPad before restarting the Photos app.
Quit your Photos app like I describe above but do not restart it. Then reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

Why aren't photos in iPhoto photo library showing up in iPhoto camera roll?

Hi,
I downloaded all the photos on my Camera Roll on my iPhone into my AirBook computer because when I went to take a photo today with my iPhone it told me I had no space left. But, now there are 300 photos in Photo Library that never showed up in Camera Roll and I can't download into my AirBook. Those photos are just sitting in Photo Library in my phone. How do I download them into my AirBook AND why did they not show up in the Camera Roll on my iPhone?
Thanks!
Caitlin

The photos are likely already on your MacBook Air in the iPhoto app there, which I assume you probably have.
iPhoto on your Mac houses the photo library.
Photos do not transfer to the Camera Roll on your iPhone (with very few exceptions). They get transferred from the Camera Roll to your photo library. You can then clean them off the Camera Roll.
When you sync the iPhone using iTunes, you can instruct iTunes how to sync your photos. If, for example, you do not want all the photos in the photo library on your iPhone, that is how to keep them on your computer but not your iPhone.

Photo library shows multiple "Last Import" albums after upgrade

Following my upgrade to IOS6, the photo library now shows 3 blank Last Import albums, the ones created when you use the camera import connector. I tried to reset photo syncs to correct the problem, but they still remain.
Having imported an event, one of the 3 Last Import albums is now populated with pictures. The issue remains that there is the clutter of the two blank ones which seem to linger and probably will always be there unless there is some way to reset this.
So the question is, has anyone else seen this issue and how can it be corrected. I have not seen any other similar postings on this problem.

And then I finally located the answer and although a bit of a pain, this corrected the problem.
Solution: (Only practical with a few empty folders)
Shoot some photos with a digital camera using a SD card.
Put the SD Card in the Camera Connection Kit and connect to the Ipad. Import the images but keep them on the card.
Disconnect the CCK and hook up to your Mac with Iphoto running. Import the images and delete from the Ipad when asked.
Delete photos from Iphoto.
Repeat several times and you should notice that each time one more Last Import album vanishes from the Ipad.

Photo library shows more photos than it really has

My photo library has 41 photos, however when checking "Usage" it shows I have 10.4Gb. Why?
The complete Photo & Camera shows:
1. Photo Library = 10.4 Gb
2. My Photo Stream = 20.1 Mb
3. Shared Photo Stream = 821 Mb
when checking via iTunes, it shows I have 3801 photos, where are they? I know they are not the in recently deleted album.
Any ideas?

Hi rfirmeza,
It may help to force close all open apps and restart your iPhone.
Force an app to close in iOS
http://support.apple.com/en-us/HT5137
Turn your iOS device off and on (restart) and reset
http://support.apple.com/en-us/HT1430
If you're still seeing a discrepancy in the number of photos on your device and storage space used, the next step would be to reinstall iOS on your device by placing it in Recovery Mode, then choosing Update in iTunes.
Make sure that you have iTunes 12 or later on your computer.
Put your device in recovery mode.
When you get the option to restore or update, select Update. This will reinstall iOS without erasing your data.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on
https://support.apple.com/en-us/HT201412
Cheers,
Allen

Cannot restore an older version of photo library from time machine

I save my photos to an external drive and back up to another drive using time machine. My photo drive has become corrupted (hard disc failing). I have gone into Timemachine and chosen an earlier photo library backup version (some months ago) and a new replacement external drive for the photo library, but when I then restore to this new drive, Time Machine advances to the most recent backup (with missing photos), and not my chosen backup, and saves this to the new drive. Is thi snot possible, or am I doing soething wrong? iphoto8, 7.1.5 & snow leopard, 10.6.8.
iMac (24-inch Mid 2007), Mac OS X (10.6.8)

As a test, try restoring it to your computer and if successful, then copy the file to the external.

My apple TV will not show my iPhotos travel photos in sequence. I set up a sequence of photos that STAY in sequence when viewing in iPhoto on my iMac, but they do not show in sequence when my Apple TV shows them on my TV screen. My Apple TV is MC 572C/A

My Apple TV will not show my photos in iPhoto on my iMac in the same sequence of images that I can see when viewing the iPhoto photos on my iMac. This is especially frustrating when I try to show my travel pictures in sequence on my TV. I have to resort to showing them on my iMac which defeats the principle purpose for purchasing my MacTV. Does anyone have a solution?
My Apple TV is Model MC 572C/A and the software is 5.2.1 (6025)
My iMac is Mac OSX version 10.7.5
THANKS!
Doug May

I can't recall whether slideshows are ordered by title or date, but you can manually re-arrange the albums in iPhoto, then batch change them once you have the order you want.

Upgrading of exisiting photo library to work with new version of iPhoto

I installed iLife'06 over my exisiting 05 version.
When opening iPhoto the system notifies that the photo library needs to be upgrades to work with this verion of iLife.
When clicking the upgrade button it examines the photo library and comes back with an error message sayin: "There is a problem accessing one or more folders in you iPhoto library folder. In Finder select iPhoto library folder. Then choose File >get Info. Make sure you have read and write permission for the folder and then apply this setting to all enclosed itmes."
I then follow all the instructions as above and continue to get the same error message.
Who can help me to view my photos again?
Dieter

Yep, Thomas Reed's article is a real gem.
Antoine,
You'll need to uninstall the VB, not just trash it.
This is from their website:
If you ever want to uninstall any Intego software, launch the Intego Installer, as explained above. Click the Uninstall Software button, then select the software you wish to uninstall, and click Uninstall. The software will be removed.

I named a new catalogue,imported 100 plus photos,now it shows new catalogue,when opened no photos

Anyone help me to sort this out please,mind you I am only new to L/R4,and not real good with computers,thanks in anticipation Mal

You probably opened a blank catalog, not the catalog with your 100 photos.
in Lightroom, go to File->Open Recent and see if your catalog is listed there, if so then select it and it will open

Why PSA data show red status when opened but green on PSA page?

Run RSA1 -> click PSA to open PSA page, locate one infosource and find the PSA under it, find the status column shows it's green, but when opening it, find the 1st column shows red for each row. How does the inconsitance occur?
BTW, if we open the infopackage monitor for the above one, find a weird thing is that each request get two consecutive processes running with a circle of red ball and green ball in the left frame. Double click one of them, in the right frame and click the monitor Status tab, the msg window is as following (in between two dashed lines below):
Incorrect data records - error requests (total status GREEN)
Diagnosis
Data records were recognized as incorrect.
System response
The valid records were updated in the data target and can be used in reporting.
The incorrect records were not written to the data target, but were posted retractively under a new request number in the PSA.
Procedure
Check the data in the error requests, correct the errors, and post the error requests.
Sounds like the data failed to uploaded to data target due to error in PSA, but why the status show green in somewhere? And if clicking the Details tab, all show green! Weird!
Thanks

Hi Kevin,
In your InfoPackage Update tab, click the Error Handling button. It seems that the Valid records update, request green option is chosen. This is why you see the green request and some error records.
This means that the corect reocrds were loaded and are available for reporting, but the incorrect ones were left behind. This is used to check the erro records separatelt so that they do not disrupt the entire data load.
Hope this helps...

How to show all regions when opening piano roll?

hey,
I want to be able to see all events in all regions when opening (not toggling!) a piano roll. I just switched from version 5 (yes, 5) to 9. It used to be like this: you deselect all regions and then just open the matrix editor (that's how the piano roll was called in ancient times).
If I do this in 9, the piano roll shows nothing. If I select all regions and open the PR, it shows only one. If I select one region, open the PR and then go back to the arrange window and select all regions it does show all info in the PR but this is a bit of a not-very-efficient work around.
Anyone any idea?
grtz
Janco

double click a region, then highlight the ARRANGE window and type command + a. It is essential to choose all regions this way not as you mentioned by choosing all by hand. Remember that when you doubleclick a region Logic highlights the PIANOROLL. So you have to highlight the arrange window by clicking on the bar just below the main tools or in other words, just above the ruler (I don't know the exaqct word for it but I hope you know what I mean.
Message was edited by: samplaire
Message was edited by: samplaire

Older (tiger) cd photo library shows no pics when opened in iPhoto 11 (Mt. Lion)

Similar Messages

Maybe you are looking for