OLE broken after Cumulative Security Update for Internet Explorer KB3003057

Our product has been using the IWebBrowser OLE interface for many years but has failed since Cumulative Security Update for Internet Explorer KB3003057. What do we need to do to get this IWebBrowser interface working again.
http://msdn.microsoft.com/en-us/library/aa752127(v=vs.85).aspx
When we try to use the Navigate function it causes general access violations such.
Our code has not changed for several years so must something must have been chainged in the OLE/ActiveX library with this security update patch.
We are getting Access Violations when calling the IWebBrowswer :: Navigate function since this KB3003057 security
patch. If I uninstall the patch everything works normally again. When I re-install the KB3003057
patch the problem returns.
All our customers (many different computers in different offices) are getting this problem once they pick up the update. It is not specific to a particular computer and we are seeing it on Windows 7 and also Windows 8.
Thanks in advance for any advise you can offer.
Thanks,
Jim Clark
[email protected]

There is no error when installing the udpate. It installs fine but after installed it breaks our calls to the IWebBrowswer OLE/ActiveX.
http://msdn.microsoft.com/en-us/library/aa752127(v=vs.85).aspx
When we try to use the Navigate function it causes general access violations such.
Our code has not changed for several years so must something must have been chainged in the OLE/ActiveX library with this security update patch.
We are getting Access Violations when calling the IWebBrowswer :: Navigate function since this KB3003057
security patch. If I uninstall the patch everything works normally again. When I re-install the KB3003057
patch the problem returns.
All our customers (many different computers in different offices) are getting this problem once they pick
up the update. It is not specific to a particular computer and we are seeing it on Windows 7 and also Windows 8.
Thanks in advance for any advise you can offer.

Similar Messages

KB2925418: Cumulative Security Update for IE _ for Windows 7....Installs crapware and is not Just a security update!!!!

This is about KB/Update KB2925418. IT IS NOT JUST A SECURITY UPDATE. And it will change things you may not want changed for example, no where does it tell exactly what it is, nor what it will do. NOT COOL. What it does amongst other things is disable Java,
NOT COOL, that breaks IE and stops our Angel Learning environment from working, NOT COOL.
Worse and far more evil than that it put the USELESS crap ware, "Bing Suggested Sites" link back in the favorites bar, THAT IS ABSOLUTELY EVIL. It has NOTHING TO DO WITH SECURITY and DOSE NOT BELONG IN A SECURITY UPDATE. HOW EVIL.
And how do I know it is evil, because just like a virus and the many browser hijackers etc out there it keeps coming back when I have intentionally removed it. ONLY EVIL things have to do that to stay on the desktop. Non evil things go away and STAY AWAY,
when the are told to!!!!!!!!!!!!
Ralph

Hi,
Did you tell us what happened exactly after you install this update?
The detailed description about this update, please refer to this article:
MS14-012: Cumulative security update for Internet Explorer: March 11, 2014
http://support.microsoft.com/kb/2925418
Karen Hu
TechNet Community Support

Cumulative Security Update for Windows XP Service Pack 2 Warning!

Not sure how many of you guys remember the problems associated with the Windows XP Service Pack 2 when it was first released, but the latest Cumulative Security patch completely disabled my Plextor 708A DVD drive and locked up Windows Explorer.
Here is the problem patch:
o Cumulative Security Update for Internet Explorer for Windows XP Service Pack 2 (KB883939)
It caused my Plextor 708A to give off two blinking Amber lights, which according to Plextor indicates the drive is defective. Plextor actually tells you to get a RMA ticket and to return the drive. Luckily I found it odd that my DVD drive became defective after I installed the latest windows update and tried uninstalling the 'fixes' before going that route. Fortunately, removal of one of the 'fixes' solved my problem.
If you find that your DVD or CD Player no longer works after doing a windows update, then do the following:
o Go to Control Panel
o Select Add Remove Programs
o Scroll to the bottom and select Security Update for Windows XP (KB883939)
o Click 'Remove'
o Restart your computer
I might not have the latest security fix right now, but at least my computer is running.
Stu: Can you report this to MSI and have them get in touch with M$?

i will, if this is a problem affecting a lot of users.
has anyone else experienced this problem?

Super slow internet after Sept security update for OS 10.4

I updated my computer last week with the Sept security update (for OS 10.4) and now my computer has come to a crawl when using the internet. My wife's PC still zips through the internet without problems. It's not the router causing the problem.

HOLY MOTHER$%&*$& SH*& and other various expletives. I have been pulling my hair out for a week trying to figure this out. I had advice to change my router security from WPA to WEP, turning off the Ipv6 configuration, you name it.. I tried it and this worked like a charm! My internet is blazing again! Come to think of it, could this be the reason that about a month ago I would go to trusted websites I have been using for years and when I would click on links it would redirect me to all kinds of various websites that had nothing to do with what I was looking for. It was to the point where when I would click on a link I would look at the bottom left of the window (firefox) and it would always start with the same IP and I could tell it was doing that redirection thing.
Anyway, BDAqua.... THANK YOU!!!
me

JDownloader broken after last security update

It ran successfully for 3 weeks and began refusing to load any menus after the most recent Apple update.
I got it to launch once by double-clicking the .jar file; since then only "the java .jar file could not be opened, see console etc."
d/l and reinstall produces the same result.
Ideas?

As it turns out it's a bug w/the latest Security update; seems it breaks a lot of java apps.
Mysteriously, it's now working. I had to launch it via the .jar file but since doing that once it now launches via the app icon.
FIWI, it's open source and the ticket I filed has yet to be responded to.
Thanks for your comeback.
Message was edited by: mhale62

MS14-080 Cumulative Security Update for IE causes IE9 to crash with iframe.dll error

Anyone heard from MS about a fix for MS14-080?
We've switched off all Windows Updates on our network since MS14-080 went on and started causing IE9 to crash.
Appears to crash IE repeatedly when accessing pages using frames.
EVENT LOG: Application EVENT TYPE: Error SOURCE: Application Error CATEGORY: Application Crashing
Events EVENT ID: 1000 COMPUTER: TIME: Thu 2014-12-11 08:52:14 AM MESSAGE: Faulting application name: iexplore.exe, version: 9.0.8112.16599, time stamp: 0x5473964b Faulting module name: IEFRAME.dll, version: 9.0.8112.16599, time stamp:
0x547396ec Exception code: 0xc0000005 Fault offset: 0x001a8290 Faulting process id: 0x13e8 Faulting application start time: 0x01d015520bb830fa Faulting application path: C:\Program Files (x86)\Internet Explorer\iexplore.exe Faulting module path: C:\Windows\system32\IEFRAME.dll
Report Id: 4adcd51a-8145-11e4-9906-7845c40d6d6c

Hi Adrian,
About this issue, we have received feedback and is working on fixing this issue. Meanwhile, you could submit the
feedback in this website:
https://connect.microsoft.com/IE/Feedback
Karen Hu
TechNet Community Support

MPSB05-13 Cumulative Security Updater broken link

I need to find the following hotfix for JRun in CF8:
MPSB05-13 Cumulative Security Updater for JRun 4.0 server
but the link doesn't work any more. Does anyone have an updated link?
http://www.adobe.com/devnet/security/security_zone/mpsb05-13.html

To be fair to them, that doc was written in 2004, so when it lists 6.0 and 6.1 as affected, they are listing all versions to that date that run on JRun (so like not CF5 or before, because they were discrete apps). I would take from that - all things being equal - that the situation exists in all subsequent versions of CF, unless they are patched. Bear in mind that JRun hasn't seen significant revision since Adam was a boy. And trust me, that was a long time ago.
In better news, according to here: http://www.adobe.com/products/jrun/, the latest / last JRun updater includes all previous patches, so you should be fine if you install that. And that one is still available.
We did all this PCI compliance shenanigans recently, and I'll be having a beer with our techo bloke tonight. I'll ask if our PCI auditors raised anything like this, and what we needed to do. That said, around the same time we finally got around to upgrading from CF8 to CF9 (yay!), and perhaps that was not a coincidence..?
Adam

Security Update for windows XP (KB936021)

Hi All,
Many users are facing problem with BI Template builder after upading Security Update for windows XP (KB936021).
If you load xml data into your BI template builder after updating windows security then you will see error <b>Compile error in hidden module module-starter</b>.
So please don't try to update this security. If you already have updated then remove this updates from your system.
Thanks
XMLP/BI Team
[email protected]

Hi Ravi
thanks for the heads up but I would rather you log an SR or a bug to alert development and we can get things fixed rather than make an announcement to the forum. Thanks for the workaround but many folks incl myself are forced to take security updates.
I will alert the dev team and we will investigate the issue with hig priority.
Tim

Help with update to internet explorer 11

I am trying to do an automatic update for internet explorer 11 with 64 set up with macafee anti virus and I keep getting an unknown error code 9C47 can anybody help please thank-you for any help you can give me

Hi,
Check the IE11_main.log in the \Windows folder:
Install problems with Internet Explorer 11
http://technet.microsoft.com/library/dn321445.aspx
Alex Zhao
TechNet Community Support

After updating latest security update for my OSX 10.7.5 one of my usb port is not working now.how do i know what is cause that usb port is not working after security update

one of usb port in my macbook pro havent work after i ve updated latest security update for osx 10.7.5, how do i know what is cause that usb port is good or bad

On a Mac running v10.7.2, the only way to reinstall Safari is to reinstall OS X using OS X Recovery.
Safari 5.1.1 is for Snow Leopard. It will not run on a Mac with v10.7 installed.

After installing security update 10.6.8 I've seen dialog boxes asking me if I will permit certain root processes, e.g. configd, to receive unsolicited messages from the internet. What are the consequences of denying these requests?

After installing security update 10.6.8 last night I've seen dialog boxes asking me if I will allow incoming network connections to certain root processes, e.g. configd. I didn't see these dialog boxes prior to installing 10.6.8. How do I make informed decisions? In other words,
(1) Where can I find 25-word summary descriptions of these processes?
(2) Where can I find discussions of the consequences of granting or denying these requests?
Alternatively (and at some risk of revealing metaphysical doubt) why am I being asked for these permissions? And who expects me to make correct decisions?
I have turned on th standard-issue OS X firewall and am running my system in stealth mode.

After installing security update 10.6.8 last night I've seen dialog boxes asking me if I will allow incoming network connections to certain root processes, e.g. configd. I didn't see these dialog boxes prior to installing 10.6.8. How do I make informed decisions? In other words,
(1) Where can I find 25-word summary descriptions of these processes?
(2) Where can I find discussions of the consequences of granting or denying these requests?
Alternatively (and at some risk of revealing metaphysical doubt) why am I being asked for these permissions? And who expects me to make correct decisions?
I have turned on th standard-issue OS X firewall and am running my system in stealth mode.

Vertical stripes after latest Security Update 2008-004 for OS X Tiger

Hi there,
I'm experiencing vertical stripes and color issues on my PB G4 17 inch screen after the security update 2008-004.
Funny thing is, a screenshot looks fine.
I already resetted PRAM and NVRAM. Didn't help.
Does anyone know a solution?
Thanks,
Phil

It's probably got nothing to do with the upgrade.
I guess your computer is about 15-20 months old and the serial number starts with W84 or W85.
This is obviously a common problem among these serial numbers, and it starts after about 15 months.
I've got a mint PBG4 17, that's NEVER left the house. Just turned it in on AppleCare repair (32 days left, phew) for this problem.
This number series is assembled in Shanghai in 2005.
/ E

After latest security update my MacBook is not finding any network. My network is ok, iPad and iPhone have no problems, but laptop is for all practical purposes turned into typing machine. Has somebody encountered similar problem? What to do?

After latest security update my MacBook is not finding any network and I think is not really turning wifi on. Has anyone encountered similar problem?

Checked the older discussion of the same type and found solution, well kind of... Thanks to other people who tried it, I just cannot remember their names at the moment. So, the solution for me was to turn off the firewall in the system preferences and suddenly lo and behold there was my network.

System exception running Configuration Wizard after installing several security updates for SP

Greetings,
Have a 2 server farm, SharePoint 2013 SP1, SQL and SharePoint. Windows Update has 15 updates downloaded and ready to install, 2 Server 2012 updates and 2 SharePoint updates, 11 Security Updates for SharePoint. So, I said yeah, go ahead and install them late
last night when I figured it wouldn't interrupt folks. (dumb move)
Windows Update took awhile, but no errors during the install. Rebooted the server as required. Once the server was back, jumped onto the server console and ran the Configuration Wizard to apply the updates to SharePoint. No problem, progressed through the
screens saying it was going to update, farm and sql information, etc. Config Wizard was going through the steps, then failed with the message: "Failed to register SharePoint services." and here's a link to the configuration log so have a jolly time
tracking it down, thank you very much.
I found the error in the log (down about 10,000 lines):
04/10/2015 03:00:02 12 ERR Task services has failed with an unknown exception
04/10/2015 03:00:02 12 ERR Exception: Microsoft.SharePoint.SPException ---> System.Runtime.InteropServices.COMException: <nativehr>0x80131904</nativehr><nativestack></nativestack>
at Microsoft.SharePoint.Library.SPRequestInternalClass.GetListsWithCallback(String bstrUrl, Guid foreignWebId, String bstrListInternalName, Int32 dwBaseType, Int32 dwBaseTypeAlt, Int32 dwServerTemplate, UInt32 dwGetListFlags, UInt32 dwListFilterFlags, Boolean bPrefetchMetaData, Boolean bSecurityTrimmed, Boolean bGetSecurityData, Boolean bPrefetchRelatedFields, ISP2DSafeArrayWriter p2DWriter, Int32& plRecycleBinCount)
at Microsoft.SharePoint.Library.SPRequest.GetListsWithCallback(String bstrUrl, Guid foreignWebId, String bstrListInternalName, Int32 dwBaseType, Int32 dwBaseTypeAlt, Int32 dwServerTemplate, UInt32 dwGetListFlags, UInt32 dwListFilterFlags, Boolean bPrefetchMetaData, Boolean bSecurityTrimmed, Boolean bGetSecurityData, Boolean bPrefetchRelatedFields, ISP2DSafeArrayWriter p2DWriter, Int32& plRecycleBinCount)
--- End of inner exception stack trace ---
at Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx)
at Microsoft.SharePoint.Library.SPRequest.GetListsWithCallback(String bstrUrl, Guid foreignWebId, String bstrListInternalName, Int32 dwBaseType, Int32 dwBaseTypeAlt, Int32 dwServerTemplate, UInt32 dwGetListFlags, UInt32 dwListFilterFlags, Boolean bPrefetchMetaData, Boolean bSecurityTrimmed, Boolean bGetSecurityData, Boolean bPrefetchRelatedFields, ISP2DSafeArrayWriter p2DWriter, Int32& plRecycleBinCount)
at Microsoft.SharePoint.SPListCollection.EnsureListsData(Guid webId, String strListName)
at Microsoft.SharePoint.SPListCollection.get_Count()
at Microsoft.SharePoint.Administration.SPAdministrationWebApplication.get_HealthRules()
at Microsoft.SharePoint.Administration.Health.SPHealthAnalyzer.RegisterRules(Assembly assembly)
at Microsoft.Office.InfoPath.Server.Util.HealthAnalyzerRegistration.RegisterHealthRules()
at Microsoft.Office.InfoPath.Server.Administration.FormsService.Update()
at Microsoft.SharePoint.PostSetupConfiguration.ServicesTask.InstallServiceInConfigDB(Boolean provisionTheServiceToo, String serviceRegistryKeyName)
at Microsoft.SharePoint.PostSetupConfiguration.ServicesTask.InstallServices(Boolean provisionTheServicesToo)
at Microsoft.SharePoint.PostSetupConfiguration.ServicesTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
So I've been searching around trying to find a clue about this. I tried using PSConfig as well, no dice. I tried using my admin account, the farm account, and the initial setup account, no dice. So I gave in about 3:00 AM and took a break, rather than have
my head hit the keyboard. Left IIS down and SP down. Had some help this morning when someone started things back up for me. sigh. So the users have been in on the sites and doing all sorts of important and critical things, so rolling back to the last
backup is the last, last resort. (Fortunately, I did do a manual backup using a PowerShell script before starting all this.)
Help. Please.
The actual sites are up and seem to be working fine. Central Admin is down though, get a 500 Internal Server Error in the browser, so things aren't correct. Duh. The config wizard didn't finish.
Thanks much,
Steven

0x80131904 translates to COR_E_SqlException. Typically this will be an MDF/LDF file out of space, or the volume that those files reside on being out of space. Check that first, then also check the SQLERROR log file for any issues.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Help! I downloaded and installed the a security update for safari last night and after it rebooted my system quit recognizing my password and quit working, taking me to a utilities window.

I let my system download and install the latest security update for Safari yesterday, 28 Apr 14, and when it rebooted, it wouldn't let me login. Instead it took me to a utilities windown that allowed me to verify my h/d then told me it couldn't be repaired so I would need to save all of my documents (not sure how since it won't boot up) and reinstall OS X. Help!

terrelld,
if you’ve been making regular backups to date, then you could just restore from the last update which you’d made before installing the most recent Safari update. If you haven’t been making regular backups to date, you can try the method provided on this Apple page, in the “Instructions for backing up to an external hard disk via Disk Utility” section. If you’re not already making regular backups, then I’d highly recommend purchasing an external disk for use as a Time Machine backup destination once you’ve gotten this resolved, so that this sort of problem would be more easily resolved in the future.

OLE broken after Cumulative Security Update for Internet Explorer KB3003057

Similar Messages

Maybe you are looking for