OLE DB provider 'OraOLEDB.Oracle' reported an error The provider did not gi

Hi, I've setup oracle client tools on a windows server that runs sql server 7
tnsping works as well as the client tool test feature on my sid.
However, I can't seem to use it from SQL Server. I've installed and uninstalled the client tools many times, I'm beginning to think perhaps I installed the wrong package. Weird thing is there is no Listener listed in Windows Services, yet the listener I setup is working.
I enabled the allow in process property of both the MSADAORA and Oracle OLE drivers from SQL Server, help!!
SELECT * FROM OPENQUERY(ORACLE_MIRROR, 'select count(1) from dual')
RESULTS IN:
Server: Msg 7399, Level 16, State 1, Line 1
OLE DB provider 'MSDAORA' reported an error.
[OLE/DB provider returned message: Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation.
Provider is unable to function until these components are installed.]
OLE DB error trace [OLE/DB Provider 'MSDAORA' IDBInitialize::Initialize returned 0x80004005:   ].
THIS IS AFTER I HAVE INSTALLED THE ORACLE 10.2 CLIENT TOOLS AND SETUP A LISTENER AND TESTED SIDS OK.
UTILIZING THE ORACLE OLE DRIVER IN THE LINKED SERVER I GET THIS ERROR:
Server: Msg 7399, Level 16, State 1, Line 1
OLE DB provider 'OraOLEDB.Oracle' reported an error. The provider did not give any information about the error.
OLE DB error trace [OLE/DB Provider 'OraOLEDB.Oracle' IDBInitialize::Initialize returned 0x80004005:  The provider did not give any information about the e                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

The MS OLEDB for Oracle was built some time ago and requires an older SQL*Net version:
OLE/DB provider returned message: Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation.
=> see Oracle Version V7.3.3 ... but you have installed V10; so the OLEDB driver from MS tries to locate old SQL*Net client library files which are not available in your installation anymore.
So best would be to use the Oracle OLEDB driver coming with the SQL*Net client you have installed.
As you mentioned this causes a different error:
Server: Msg 7399, Level 16, State 1, Line 1
OLE DB provider 'OraOLEDB.Oracle' reported an error. The provider did not give any information about the error.
OLE DB error trace [OLE/DB Provider 'OraOLEDB.Oracle' IDBInitialize::Initialize returned 0x80004005: The provider did not give any information about the e
This error is related to the OLEDB process running by default in "out-of-process" mode which doesn't work with Oracle OLEDB driver. By setting a key in the registry under SQL Server this can be changed to run in-process (the default) the provider will work:
     HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MSSQLServer\Providers\ORAOLEDB.ORACLE
Change the value of the key "AllowInProcess" under the "OraOLEDB.Oracle" folder
to a hexadeciaml value of 1.
If the key does not exist create it as a new DWORD value.
See also:
Article-ID:         Note 260775.1
Title:              ORA-12560 Attempting to Query the Oracle Database from
                    Microsoft SQL Server's SQL Query Analyzer Using the Oracle
                    Provider for OLE DB                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

Similar Messages

  • Error: The resource did not process correctly. How do I get rid of it?

    I continue to receive an error everytime I log in to my college student email. The error says The resource did not process correctly. I desperately need help with this problem the error shows this as well java.lang.NullPointerException

    Is that with Angel LMS from Blackboard?
    That software doesn't seem to work with Firefox 7.
    *http://helpdesk.oneonta.edu/xoops/modules/smartsection/item.php?itemid=167

  • SQL 2012 - SSIS Error -The step did not generate any output. The return value was unknown. The process exit code was -1073741819. The step failed.

    Hi guys 
     Trying to run this package on SQL 2012 agent  and getting below error . No more details I could find so far.
    The step did not generate any output.  The return value was unknown.  The process exit code was -1073741819.  The step failed.
    About Package - Its connecting to different version (2000,2005,2008,2008R2,2012) servers and putting Jobs information into one Database table.  
    Any workaround or fix ?
    Thanks
    Please Mark As Answer if it is helpful. \\Aim To Inspire Rather to Teach

    New package or one that used to work? Connecting how? How does it poll?
    On the surface it is an error from a memory space of the binary/non-managed code, so nothing can be really concluded based on what you decided to share with us.
    Arthur My Blog
    So Same package is working fine from my local machine which has SQL 2008 R2 and SQL 2012 installed. I am trying to push the package on server which has sql server 2012 Installed . 
    I don't see any error .
    I ran package manually from server using SQL Data tools and ran successfully...
    Please Mark As Answer if it is helpful. \\Aim To Inspire Rather to Teach

  • New SP Custom List results in Power Query Error: Expression.Error: The key did not match any rows in the table.

    Hi,
    I'm running into something that seems to be a bug in Power Query. I've got my Power Query tables from SharePoint lists into Excel and Power Pivot data model. (Making sure the SharePoint site is in English and I replace MMD columns with normal columns). 
    But then, when I close down Excel, add another custom list to SharePoint, open the Excel workbook and want to add that new custom list using the same connection (via recent data sources).
    It shows the newly added custom list in the explorer but with an error:
    Nothing I can do to fix this; restarting Excel or PC; nothing. 
    The only way I got around this was by removing all my existing data sources and re-create them.. 
    after that, the same SharePoint custom list WAS read with Power Query without an issue.
    Thanks,
    Jeroen

    Its because of recent updates to Power Query.
    In recent updates internally their is some change in syntax for reading particular table from list (I faced this issue while reading data from Excel file, i.e After applying recent update of Power Query my Queries which were working fine before starting
    throwing same error that yo are facing).
    As solution their is small tweak to be done in existing queries, instead of recreating all queries. If you can provide me your complete old query from Advanced editor then I can point to tweak that need to be done.
    Thanks,
    Sagar K

  • Cannot get data of the row from OLE DB provider "OraOLEDB.Oracle" for linked server

    I have created a stored procedure in SQL Server for a report that uses parameters.  In the report I am linking an Oracle table.  I use a subquery like this to query the Oracle table:  (select * from openquery(oracle_linked_server, 'select
    partno, description from oracletable')).  If I run the subquery it works fine every time.  The linked server uses an oracle account which has access to the oracle table.  When I first created the Stored Procedure it worked fine for me.  When
    I test the report, it worked fine.  Then I asked another user to test it and it broke with the below error message.  
    OLE DB provider "OraOLEDB.Oracle" for linked server "XXXX_ORACLE" returned message "ORA-01403: no data found".
    Msg 7346, Level 16, State 2, Procedure usp_report_XXXXXX, Line 15
    Cannot get the data of the row from the OLE DB provider "OraOLEDB.Oracle" for linked server "XXXX_ORACLE".
    Now when I try the report or the stored procedure, I get the same error.  I tested the oracle subquery in the stored procedure and it still works.  The report uses a service account to execute the stored procedure.
    I am using SQL Server 2012 Developer Edition 64 bit (11.0.5058) Management Studio to develop the stored procedure.  The SQL Server I am accessing and running the stored procedure is SQL Server 2008R2 Developer Edition 64bit (10.50.2550).  The user
    that tested the report for me has SQL Server 2008R2 but that shouldn't matter since he is running the report in Internet Explorer.
    What is changing that it works for a while and then stops?
    Fred
    Fred Schmid

    I found the answer.  It was in the query.  I put the TRIM statement on the part# field in the Oracle subquery and took the LTRIM function out of the ON clause that joined my SQL Server table with the Oracle linked server table.  Now everything
    works.  The query looks like this:
    SQL_Server_Table sst
    LEFT OUTER JOIN
    (SELECT * FROM OPENQUERY(OracleLinkedServer, 'SELECT TRIM(partNo) AS partNo, partDesc FROM OracleTable')) ols
    ON sst.partNo = ols.partNo
    Thanks for pointing me in the right direction.
    Fred Schmid

  • The operation could not be performed because OLE DB provider "OraOLEDB.Oracle" for linked server ...

    Our setup is that we have two databases; a SQL Server 2008 database and an Oracle database (11g). I've got the oracle MTS stuff installed and the Oracle MTS Recovery Service is running. I have DTC configured to allow distributed transactions. All access to the Oracle tables takes place via views in the SQL Server database that go against Oracle tables in the linked server.
    (With regard to DTC config: Checked-> Network DTC Access, Allow Remote Clients, Allow Inbound, Allow Outbound, Mutual Authentication (tried all 3 options), Enable XA Transactions and Enable SNA LU 6.2 Transactions. DTC logs in as NT AUTHORITY\NetworkService)
    Our app is an ASP.NET MVC 4.0 app that calls into a number of WCF services to perform database work. Currently the web app and the WCF service share the same app pool (not sure if it's relevant, but just in case...)
    Some of our services are transactional, others are not.
    Each WCF service that is transactional has the following attribute on its interface:
    [ServiceContract(SessionMode=SessionMode.Required)]
    and the following attribute on the method signatures in the interface:
    [TransactionFlow(TransactionFlowOption.Allowed)]
    and the following attribute on every method implementations:
    [OperationBehavior(TransactionScopeRequired = true, TransactionAutoComplete = true)]
    In my data access layer, all the transactional methods are set up as follows:
    using (IDbConnection conn = DbTools.GetConnection(_configStr, _connStr))
    using (IDbCommand cmd = DbTools.GetCommand(conn, "SET XACT_ABORT ON"))
    cmd.ExecuteNonQuery();
    using (IDbCommand cmd = DbTools.GetCommand(conn, sql))
    ... Perform actual database work ...
    Services that are transactional call transactional DAL code. The idea was to keep the stuff that needs to be transactional (a few cases) separate from the stuff that doesn't need to be transactional (~95% of the cases).
    There ought not be cases where transactional and non-transactional WCF methods are called from within a transaction (though I haven't verified this and this may be the cause of my problems. I'm not sure, which is part of why I'm asking here.)
    As I mentioned before, in most cases, this all works fine.
    Periodically, and I cannot identify what initiates it, I start getting errors. And once they start, pretty much everything starts failing for a while. Eventually things start working again. Not sure why... This is all in a test environment with a single user.
    Sometimes the error is:
    Unable to start a nested transaction for OLE DB provider "OraOLEDB.Oracle" for linked server "ORACLSERVERNAME". A nested transaction was required because the XACT_ABORT option was set to OFF.
    This message, I'm guessing is happening when I have non-transactional stuff within transactions, as I'm not setting XACT_ABORT in the non-transactional code (that's totally doable, if that will fix my issue).
    Most often, however, the error is this:
    System.Data.SqlClient.SqlException (0x80131904): The operation could not be performed because OLE DB provider "OraOLEDB.Oracle" for linked server "ORACLSERVERNAME" was unable to begin a distributed transaction.
    Now, originally we only had transactions on SQL Server tables and that all worked fine. It wasn't until we added transaction support for some of the Oracle tables that things started failing. I know the Oracle transactions work. And as I said, most of the time, everything is just hunky dorey and then sometimes it starts failing and keeps failing for a while until it decides to stop failing and then it all works again.
    I noticed that our transactions didn't seem to have a DistributedIdentifier set, so I added the EnsureDistributed() method from this blog post: http://www.make-awesome.com/2010/04/forcibly-creating-a-distributed-net-transaction/
    Instead of a hardcoded Guid (which seemed to cause a lot of problems), I have it generating a new Guid for each transaction and that seems to work, but it has not fixed my problem. I'm wondering if the lack of a DistribuedIdentifier is indicative of some other underlying problem. I've never dealt with an environment quite like this before, so I'm not sure what is "normal".
    I've also noticed that the DistributedIdentifier doesn't get passed to WCF. From the client, I have a DistributedIdentifier and a LocalIdentifier in Transaction.Current.TransactionInformation. In the WCF server, however there is only a LocalIdentifier set and it is a different Guid from the client side (which makes sense, but I would have expected the DistributedIdentifier to go across).
    So I changed the wait the code above works and instead, on the WCF side, I call a method that calls Transaction.Current.EnlistDurable() with the DummyEnlistmentNotification class from the link above (though with a unique Guid for each transaction instead of the hardcoded guid in the link). I now havea  DistributedIdentifier on the server-side, but it still doesn't fix the problem.
    It appears that when I'm in the midst of transactions failing, even after I shut down IIS, I'm unable to get the DTC service to shutdown and restart. If I go into Component Services and change the security settings, for example, and hit Apply or OK, after a bit of a wait I get a dialgo that says, "Failed ot restart the MS DTC serivce. Please examine the eventlog for further details."
    In the eventlog I get a series of events:
    1 (from MSDTC): "The MS DTC service is stopping"
    2 (From MSSQL$SQLEXPRESS): "The connection has been lost with Microsoft Distributed Transaction Coordinator (MS DTC). Recovery of any in-doubt distributed transactions
    involving Microsoft Distributed Transaction Coordinator (MS DTC) will begin once the connection is re-established. This is an informational
    message only. No user action is required."
    -- Folowed by these 3 identical messages
    3 (from MSDTC Client 2): 'MSDTC encountered an error (HR=0x80000171) while attempting to establish a secure connection with system GCOVA38.'
    4 (from MSDTC Client 2): 'MSDTC encountered an error (HR=0x80000171) while attempting to establish a secure connection with system GCOVA38.'
    5 (from MSDTC Client 2): 'MSDTC encountered an error (HR=0x80000171) while attempting to establish a secure connection with system GCOVA38.'
    6 (From MSDTC 2): MSDTC started with the following settings: Security Configuration (OFF = 0 and ON = 1):
    Allow Remote Administrator = 0,
    Network Clients = 1,
    Trasaction Manager Communication:
    Allow Inbound Transactions = 1,
    Allow Outbound Transactions = 1,
    Transaction Internet Protocol (TIP) = 0,
    Enable XA Transactions = 1,
    Enable SNA LU 6.2 Transactions = 1,
    MSDTC Communications Security = Mutual Authentication Required, Account = NT AUTHORITY\NetworkService,
    Firewall Exclusion Detected = 0
    Transaction Bridge Installed = 0
    Filtering Duplicate Events = 1
    This makes me wonder if there's something maybe holding a transaction open somewhere?

    The statement executed from the sql server. (Installed version sql server 2008 64 bit standard edition SP1 and oracle 11g 64 bit client), DTS enabled
    Below is the actual sql statement issued
    SET XACT_ABORT ON
    BEGIN TRAN
    insert into XXX..EUINTGR.UPLOAD_LWP ([ALTID]
              ,[GRANT_FROM],[GRANT_TO],[NO_OF_DAYS],[LEAVENAME],[LEAVEREASON],[FROMHALFTAG]
              ,[TOHALFTAG] ,[UNIT_USER],[UPLOAD_REF_NO],[STATUS],[LOGINID],[AVAILTYPE],[LV_REV_ENTRY])
              values('IS2755','2010-06-01',
    '2010-06-01','.5',     'LWOP'     ,'PERSONAL'     ,'F',     'F',     'EUINTGR',
    '20101',1,1,0,'ENTRY')
    rollback TRAN
    OLE DB provider "ORAOLEDB.ORACLE" for linked server "XXX" returned message "New transaction cannot enlist in the specified transaction coordinator. ".
    Msg 7391, Level 16, State 2, Line 3
    The operation could not be performed because OLE DB provider "ORAOLEDB.ORACLE" for linked server "XXX" was unable to begin a distributed transaction.
    Able to execute the above statement successfully without using transaction.We need to run the statement with transaction.

  • Linked Server :: OLE DB provider "OraOLEDB.Oracle" for linked server "ABC" returned message "New transaction cannot enlist in the specified transaction coordinator. ".

    Hello All,
    As mentioned in title, i am stuck up with that articular error from last three days,
    i have following scenario, my SQL server 2008, my oracle 10g are on both same machine with OS Windows Server 2008.
    the following error generated on my management studio when i execute my procedure written in my SQL server. Following is original source code snippet after error massage.
    OLE DB provider "OraOLEDB.Oracle" for linked server "ORCL" returned message "New transaction cannot enlist in the specified transaction coordinator. ".
    Msg 50000, Level 16, State 2, Procedure PROC_MIGRATE_MST_FRM_ORA_SQLSERVER, Line 43
    The operation could not be performed because OLE DB provider "OraOLEDB.Oracle" for linked server "ORCL" was unable to begin a distributed transaction.
    BEGIN TRY
    -- MIGRATION OF PR_COMPANY_MH START
    BEGIN TRANSACTION T1
    PRINT 'mILAN NNNNNNNNN 11'
    INSERT INTO PROD.PR_COMPANY_MH
    SELECT * FROM OPENQUERY(ORCL, 'SELECT * FROM PR_COMPANY_MH WHERE SQL_FLG = ''N'' ')
    PRINT 'mILAN NNNNNNNNN 12'
    UPDATE OPENQUERY(ORCL, 'SELECT SQL_FLG FROM PR_COMPANY_MH WHERE SQL_FLG = ''N''')
    SET SQL_FLG = 'Y'
    --EXECUTE ('UPDATE PROD.PR_COMPANY_MH SET SQL_FLG = ''Y'' ') AT [ORCL]
    PRINT 'mILAN NNNNNNNNN 13'
    COMMIT TRANSACTION T1
    -- MIGRATION OF PR_COMPANY_MH END
    END TRY
    BEGIN CATCH
    PRINT 'mILAN NNNNNNNNN 14'
    ROLLBACK TRANSACTION T1
    PRINT 'mILAN NNNNNNNNN 15'
    SELECT
    @ErrorNumber = ERROR_NUMBER(),
    @ErrorSeverity = ERROR_SEVERITY(),
    @ErrorState = ERROR_STATE(),
    @ErrorLine = ERROR_LINE(),
    @ErrorProcedure = ISNULL(ERROR_PROCEDURE(), '-');
    PRINT 'mILAN NNNNNNNNN 16'
    SELECT @ErrorMessage = ERROR_MESSAGE();
    RAISERROR (@ErrorMessage, @ErrorSeverity, @ErrorState, @ErrorNumber, @ErrorProcedure)
    PRINT 'mILAN NNNNNNNNN 17'
    END CATCH
    this perticular part is raising that error, and i had tried every configuartion on my local machine related to MS DTC.
    When i remove my transaction code, its work just fine no exception raise, but when i use then i.e. BEGIN TRAN, COMMITE TRAN, AND ROLLBACK TRAN. its giving me error, other wise its fine.
    Please Help or disscus or suggest why my transaction base code is not woking????
    thanks in advance.
    Regards,
    Milan

    Sorry again, I am new on any kind of forum, so i am learning now, following is the error massage generated by SQL Server. and its not
    an architecture problem, i had just included my complete architecture to be more informative while asking for the solution or suggestion. My real problem is T-SQL, i think and its related to Distributed queries raise in SQL Server in Oracle Link Server.
    OLE DB provider "OraOLEDB.Oracle"
    for linked server "ORCL" returned message "New transaction cannot enlist in the specified transaction coordinator. ".
    Msg 50000, Level 16, State 2, Procedure PROC_MIGRATE_MST_FRM_ORA_SQLSERVER,
    Line 43
    The operation could not be performed because OLE
    DB provider "OraOLEDB.Oracle" for linked server "ORCL" was unable to begin a distributed transaction.

  • Cannot initialize the data source object of OLE DB provider "OraOLEDB.Oracl

    I have created a linked server in a SQL Server 2005 connecting to either an Oracle Database and a SQL Server 6.5 database and getting the following error for both links when trying to query using provider OraOLEDB.Oracle, please help.
    OLE DB provider "OraOLEDB.Oracle" for linked server "finprod3" returned message "ORA-12154: TNS:could not resolve the connect identifier specified".
    Msg 7303, Level 16, State 1, Line 1
    Cannot initialize the data source object of OLE DB provider "OraOLEDB.Oracle" for linked server "finprod3".

    What version of Oracle client software are you using? 32 bit or 64 bit? Is the OS 32 bit or 64 bit?
    12154 generally means the client can't figure out what TNSNames.ora entry you're referring to, which is the part you passed as "data source" in the oledb connection. Did you configure the client? Does SQLPlus connect without issue?
    There's also a known issue where running 32 bit client software on a 64 bit OS can result in that error in some versions, due to parenthesis in the path of the executable - 32 bit apps go in Program Files (x86) on a 64 bit OS. Applying the latest patch level to the client software will resolve that issue.
    Greg

  • Provider = OraOLEDB.Oracle - provider not found after Dev Install of O8i

    When I run my VB application and try to connect to the Oracle database using ADO and the
    Provider = OraOLEDB.Oracle
    I get the error message "Provider not found or is installed incorrectly."
    This is strange as I have installed the developer version of Oracle and I can connect to the database using SQLPLUS.
    Does anyone know what the problem could be?
    Thanks

    Hi Vincent,
    Here is what you are looking for.
    NOTE> Installing the 11.2.0.3 Oracle Provider for OLE DB from the Client Install Media Does Not Properly Register the Provider [ID 1380742.1]
    Bug:13417266 WHILE UPGRADING TO 11.2.0.3, INSTALLER FAILS TO REGISTER ORAOLEDB DLL
    Regards!
    Stefanie

  • Error :"The provider is not compatible with the version of Oracle client"

    Hi guys!
    I'm facing this problem:
    When my .Net application tries to access the DB, I get this error message above.
    The application is into the same machine of DB and the operational system is Windows Server Enterprise 64 bits.
    I'm comparing to another machine that has the same scenario but runs in Windows Vista 64 bits. This problem doesn't happen and I can normally access the DB.
    The both database versions are 10g Release 2 (10.2) and all components from Oracle Database Components 10.2.0.2.21 are installed as the containing bellow:
    -Oracle Data Provider for .NET 1.x 10.2.0.2.20
    -Oracle Data Provider for .NET 2.0 10.2.0.2.20
    -Oracle Developer Tools for Visual Studio .NET 2003 10.2.0.2.20
    -Oracle Developer Tools for Visual Studio 2005 10.2.0.2.20
    -Oracle Provider for OLE DB 10.2.0.2.20
    -Oracle Objects for OLE 10.2.0.2.20
    -Oracle Services For Microsoft Transaction Server 10.2.0.1.0
    -Oracle Net 10.2.0.1.0
    -Oracle Universal Installer 10.2.0.2.0
    Oracle.DataAcces.DLL is 2.102.2.20 and it is reference in my .Net app (that is published and located into IIS).
    These are the Oracle assemblies installes in 'C:\Windows\Assembly':
    Windows Vista Machine:
    ASSEMBLY NAME VERSION CULTURE PUBLIC KEY TOKEN PROCESS ARCHITECTURE
    Oracle.DataAccess 10.2.0.100 Neutral 89b483f429c47342
    Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
    Oracle.DataAccess.resources 10.2.0.100 pt-BR 89b483f429c47342
    Oracle.DataAccess.resources 10.2.0.100 it 89b483f429c47342
    Oracle.DataAccess.resources 10.2.0.100 fr 89b483f429c47342
    Oracle.DataAccess.resources 10.2.0.100 es 89b483f429c47342
    Oracle.DataAccess.resources 10.2.0.100 de 89b483f429c47342
    Oracle.Management.Omo 2.102.2.20 Neutral 89b483f429c47342 x86
    Oracle.VsDevTools 2.102.2.20 Neutral 89b483f429c47342 x86
    Policy.10.1.Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
    Policy.10.2.Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
    Windows Server Machine:
    ASSEMBLY NAME VERSION CULTURE PUBLIC KEY TOKEN PROCESS ARCHITECTURE
    Oracle.DataAccess 10.2.0.100 Neutral 89b483f429c47342
    Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
    Oracle.DataAccess 2.102.2.20 Neutral 89b483f429c47342 x86
    Oracle.DataAccess.resources 10.2.0.100 pt-BR 89b483f429c47342
    Oracle.DataAccess.resources 10.2.0.100 zh-CHT 89b483f429c47342
    Oracle.DataAccess.resources 10.2.0.100 zh-CHS 89b483f429c47342
    Oracle.DataAccess.resources 10.2.0.100 ko 89b483f429c47342
    Oracle.DataAccess.resources 10.2.0.100 jp 89b483f429c47342
    Oracle.DataAccess.resources 10.2.0.100 it 89b483f429c47342
    Oracle.DataAccess.resources 10.2.0.100 fr 89b483f429c47342
    Oracle.DataAccess.resources 10.2.0.100 es 89b483f429c47342
    Oracle.DataAccess.resources 10.2.0.100 de 89b483f429c47342
    Policy.10.1.Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
    Policy.10.2.Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
    Policy.9.2.Oracle.DataAccess 10.2.0.100 Neutral 89b483f429c47342
    Policy.9.2.Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
    What should I check and do to solve this problems?
    Thanks for help,
    Anderson

    Hi,
    Often the error "The provider is not compatible with the version of Oracle client" is raised when the unmanaged dll OraOpsX.dll can't be found, can't be loaded, or is the wrong version. For version 10.2.0.x of ODP.NET and .NET Framework 2.x the file should be called "OraOps10w.dll" and should be found in the %ORACLE_HOME%\bin directory.
    Since the ODAC pieces are installed on the same host as the database, are they in a separate Oracle Home or the same Oracle Home as the database software? If there are multiple Oracle Home directories, which one is in the system path first?
    I would start with verifying the version of OraOps10w.dll and the system path on the server. You might also confirm that the Oracle Home directory (and everything under it) has the following permissions for Authenticated Users:
    - Read & Execute
    - List folder contents
    - Read
    Regards,
    Mark

  • Oracle Apps Report error "Oracle Reports Server CGI - The Reports Server Engine terminated abnormally."

    Hi ,
    I have modified layout of one existing custom report.
    I have added 3 columns in the report , Now when I execute the report sometimes it gets executed with the newly added columns and sometimes it errors out with below error.
    Error: The requested URL was not found, or cannot be served at this time.
    Oracle Reports Server CGI - The Reports Server Engine terminated abnormally.
    Any pointers in this regards will be appreciated.
    Thanks

    I found there were some srw.message statement ( used for debugging purpose) were there , when I removed those statements. This error was gone.

  • The only working print-related function in BioBench1.2 on my PC is the "Print Report", all the other "Print" functions gave me "Error, the printer is not set up correctly".

    I used to print all my BioBench data by first exporting them to Excel and then print from there. Recently I need to print some of the screen shots and some data directly from array analysis, but when I click on the "print" buttons, the "Error, the printer is not set up correctly" message occurs. The only thing I can print from BB without this error is the report printing function. I have a postcript printer and I have set the postscript option to be "true"... Thanks !

    This problem is a result of a limitation in Windows 9x regarding the size of an image that you can send to the printer. The problem does not occur on Windows 2000/NT. This problem appeared with the increased color options of LabVIEW 6.0 on which the BB1.2 is based.Although it is not immediately obvious, your video driver and settings play a role in printing.
    1. Try adjusting the color palette your driver uses (i.e., 256 color, high olor, true color). The error may occur only in one of these modes. Also, change the resolution (number of pixels) to represent the Screen Area; e.g., change from a 1024 x 768 display to an 800 x 600 pixel display.
    2.Certain video drivers also support "acceleration" modes. Using a non-accelerated mode often eliminates the error. For
    Windows 95/98, right-click on your My Computer icon and select "Properties" from the pop-up
    menu. On the Performance tab, click the Graphics button and change the Hardware Acceleration (e.g., if it is set to "Full", lower the setting a notch or two); for Windows 2000/NT, right-click on your Desktop and select "Properties" from the pop-up menu. On the Settings tab, click the Advanced button and go to
    Troubleshooting.
    3.In Windows, the standard VGA driver provided by the operating system is very stable. Try using this driver in place of the specific one written for your video hardware. If the error is eliminated, there is likely a problem with your vendor-provided video driver.
    4.These errors are most often fixed with the latest
    video/printer driver. Be sure to contact your hardware manufacturer and install the latest driver. An easy way to determine if your error is "driver-related" is to move your code to another machine (and hopefully a different set of drivers) and see if th
    e error persists. If the problem is printer related, try another printer.
    5.Make sure there are at least 100M avalible space in your C: drive. If not, set the virtual memory to the other drive which has larger available space.

  • Oracle.DataAccess.Client.OracleException: The provider is not compatible

    I am getting an error, and I don't understand why I'm getting it.
    Error:
    Oracle.DataAccess.Client.OracleException: The provider is not compatible with the version of Oracle client
    Environment:
    ODP.NET, 10.2.0.2 (ODTwithODAC10202.exe install)
    Oracle 9i database
    Windows 2000, .NET 1.x framework
    Before ODP.NET, Oracle 9.2 client
    Server does not have Visual Studio installed
    Just installed ODP.NET today; any time I attempt to access OracleConnection, I get the error above. I am a newbie to server installations; if something is obvious to you, it might not be obvious to me, so feel free to point out even the most basic things.
    I did install ODP.NET (same version) on my own PC several months ago, running over the same database, and everything seems to be working fine...
    Message was edited by:
    user531571

    Yeah; apparently, the Oracle install on that server was known (by everyone but me, from the sounds of it) to be exceptionally fragile. Installing ODP.NET brought down all Oracle connections. Uninstalling ODP.NET broke (actually, shattered might be closer to the truth) the Oracle instance on that box. Our solution? Start from scratch with a new server. Another piece of information which would have been nice to know is that they were looking for an excuse to get rid of this server; I wouldn't have been running around like a madman trying to fix it (and stressing all the while).
    So, the problem has been solved, but not in any kind of normal fashion.

  • Crystal report error (The table '' could not be found)

    Dear Expert,
    As I know, the end user who don't want to edit the crystal report design no need to buy crystal report,right?
    Using the 'Crystal reports for SAP B1', they already view the report.
    But, how about, if I had created one crystal report, and then I want to distribute to end user. When I load the report on user machine that dont have crystal report, the system shown an error (The table '' could not be found).
    I think, maybe because of the database location. When I create the report, of course I made connection to my machine as a source of database location. But, how i'm going to change the database location to user machine?
    Is it when we login into SAP, did SAP auto detect the new location source? And will auto create connection to the crystal report?
    Thanks in advance for any help.

    Hi ,
    We do not create the database connection for the end user. the end user must have the same database connection as it is set up on your machine. The report is looking for the same connection, with the same access into the database.
    Best regards,
    Jadie

  • Crystal Report Runtime Error 9.0.Could not open the report

    Hi,
    Getting the Crystal Report Runtime Error 9.0.Could not open the report while Run on Launch Application. Actually in Launch Application, created a link for exe which is having crystal reports. We can open the Crystal Reports from the exe outside B1.
    Note: SAP 2007, Crystal Report 2008 is using.Normally can open crystal report.
    Any help to fix the error is appreciated.
    Thanks & Regards,
    Parvatha Solai.N

    Hi,
    Please post screen shot of error message here.
    Thanks & Regards,
    Nagarajan

Maybe you are looking for