Ole object not visible on oracle report

Hi,
I have an oracle report built in oracle report 6i builder I have used a Boilerplate OLE Object(image.bmp) in the report but when I am executing the report on Oracle E Business(Application) then that OLE object is not visible on the report output(output is in the pdf format).
Please help me out with this
Thanks in advance

If you want to display an image on your report, use Link File as item type in the Layout Editor.
Note that the image has to be accessable from the Reports Server.

Similar Messages

  • Info Object not visible in Dimension Reporting

    Hallo,
    I've created a multi provider which includes 2 infocubes.
    I added a new Infoobject to 1 of the cubes and added it into the Identification and also to the Dimensions of the Multi.
    Strangely, when I create a query, the Info-object is not shown into the dimension.
    Any suggestions?
    Regards,
    Kurt

    Check if the multirovider is active or not and also the infocube. Again check the identification. if every thing is fine, just logout of the system and login again.

  • FRM-41344 - OLE object not defined  for CONTROL_OLE  in the current record

    Hi!
    I am working in a multirecord block, and I need to obtain data from a Weighing System on each record. But this error appears in run time: FRM-41344 - OLE object not defined for CONTROL_OLE in the current record.
    I use the same in other program, but in that case is a single record block.
    Can somebody help me?

    Hi;
    For your issue i suggest close your thread here as changing thread status to answered and move it to Forum Home » Application Development in PL/SQL » Forms which is dedicated forum site
    Regard
    Helios

  • Data Table module enabled script is not visible in Oracle Test Manager

    Hi,
    Data Table module enabled script is not visible in Oracle Test Manager (OTM)
    Steps to reproduce:
    1.     Create new script (Oracle EBS/Forms)
    2.     Enable Data Table module (Script--->Script Properties-->Modules) and save.
    3.     Try to add the script in Oracle Test Manager.
    Environment details:
    Windows 7
    OATS Version: 12.1.0.2 Build 58
    IE 9
    Thanks
    -Pops

    Hi Deepu,
    I'm trying to add Data Table enabled script in Oracle Test Manager.
    Data Table Module enable script is not visible in OTM.
    In OATS 12.3, also i'm facing the same issue.
    Thanks,
    POPS

  • New objects not visible in report objectpicker

    Hi, I'm new to SCOM so please forgive me if I say something wrong.
    We are using SCOM 2007 R2.
    In Operations Console I've created 2 new Web Applications in Authoring view.
    In Reporting view I open  Availability report from Microsoft Generic Report Library
    Click Add Object
    Search for Web Application I've created and get nothing
    For some reason I see only old objects when search or view all available in report. I tried to use old Management Package and created my own (I thought the problem was in sealed MP, but my new is unsealed). Found similar problem in "Missing Objects
    in Report Objectpicke" question,  but we have less than 100 monitoring agents.
    So I have no idea why objects are not visible, could you please help?

    Verify from Group {contain all computers that you want} that using in Reporting.
    You also check below link, it's similar issue
    http://social.technet.microsoft.com/Forums/systemcenter/en-US/5cb0fb12-73c5-4553-987f-ea415babd876/missing-objects-in-report-objectpicker?forum=operationsmanagerreporting
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"

  • Data loaded in Infocube is not visible in the Reporting

    Hi all,
    In the info cube, the data is not visible for reporting, How can i make it available for reporting,
    When i select the Manage option from the context menu of the cube and select the Requests Tab, i get a pop up message that tells
    " There is an inconsistency between the load status of the data and the option of reporting on this data.
    There is data in the InfoCube/ODS object that is OK from a quality point of view, but is not yet displayed in reporting.
    The problem, for example, is to do with request 0000018049, number REQU_F4ZBFRMDGBULE9WCUN3R5UX5X."
    How do i find out the inconsistancies?
    PS: All the requesta are delta upload
    There is no aggregates for this cube.
    Thanks n regards
    Girikumar

    Hi Girikumar
    Use the RSRV transaction and select All Elementary Tests  in the dropdown ->Transaction data  , select the Consistency of the Time Dimension for an InfoCube  and select your cube and Execute the button ..if any error are there it will display the inconsistency ..Repair the Inconsistency with Correct Button..
    Check the other test also ..
    Hope the above helps you..\
    Bye
    Shu Moh..

  • Navigational attribute data not visible in BEx Report

    Hello All,
    I am facing following problem in one of my BEx reports:
    I am fetching data from an ODS. With other columns of ODS,  I have also to show few navigational attributes( which are master data of some info-object) . In report the corresponding data in navigational attributes is not visible for few records, although when I see the master data of this Info-object (whose navigational attributes I have to include), in  Adm. Wrkbench the data is visible. I wonder what step is missing.
    Many Thanks for helping me out.
    Best Regards,
    Sumita

    Hi Roberto,
    While trying to activate the Infoobject's master data (by right-click) I get the following message,
    "Lock NOT set for: Loading master data attributes"
    And the data is not activated.
    Can you please suggest what needs to be done.
    Thanks & Regards,
    Sumita

  • OLE object not linking... is CR10.5 on VS2008

    Running Crystal Reports 10.5 which comes with VS2008
    i have inserted an OLE object and told the Insert object to Create From File - i then browse to the location of the BMP file and click on link
    I do NOT have Display as Icon checked
    the image does not show up - has the name of the image (Command Line)
    i've saved the report, closed the report and reopened it - there is NO updating links message
    and when i run the report, the image isn't displayed
    How do i get it to display the image and not the icon...
    this really shouldn't be this hard.

    Hello,
    Try adding the following line in <httpHandlers> section of web.config
    <add verb="GET" path="CrystalImageHandler.aspx" type="CrystalDecisions.Web.CrystalImageHandler, CrystalDecisions.Web, Version= 10.5.3700.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
    Thanks,
    Saurabh

  • Sum function do not work in oracle reports enhanced spreadsheet format

    we are using oracle reports 10.1.2.3 in our oracle application server 10gr2 and we are creating enhanced spreed sheet.And the report opens in MS excel fine.But we can not apply any formula like VALUE,SUM,AVG on that report after opening it into excel.First we thought that it may be because of the comma in the number filed.we removed that comma from the filed but t still gives the error "Error in value"

    Hi,
    I hope you already solved this problem, I had the same issue after spending an hour I found the workaround, this is just for the guys who experience the same issue. Try to format your number columns either at database level(not via Report builder property palette) with TO_CHAR(...) OR use this Format Mask at Report level to format your numbers -NNNGNNNGNN0D000(negative sign must be there to avoid space in output Excel).
    Hope it helps,
    Regards,
    Syed Khawar

  • Print button is not visible in RDLC report

    hi
    I am developing web application in Visual studio 2012 ,.net framework 4.5,C#.net
    I have designed RDLC report for web application,in report viewer i have given showprint button = true, in browser print is not visible in all the browser.
    How should i give Email functionality in report,is there any sample code for email.
    How to overcome the above two problems,print and Email
       <rsweb:ReportViewer ID="ReportViewer1" runat="server"  Font-Names="Verdana" Font-Size="8pt" 
                InteractiveDeviceInfos="(Collection)" WaitMessageFont-Names="Verdana" WaitMessageFont-Size="14pt" 
                    BackColor="#CCCCFF" ShowPrintButton="true"  ShowPageNavigationControls="True" 
                ShowBackButton="True" ShowCredentialPrompts="True" ShowDocumentMapButton="True" ShowExportControls="True" 
                ShowFindControls="True" ShowParameterPrompts="True" ShowPromptAreaButton="True" ShowRefreshButton="True" ShowZoomControl="True"  >
               <LocalReport ReportPath="Report1.rdlc" >
                       <DataSources>
                           <rsweb:ReportDataSource />
                       </DataSources>
                    </LocalReport >
            </rsweb:ReportViewer>
    Thanks&Regards,
    Radhika

    Hi Om Prakasah,
    If I understanding correctly, you created a ReportViewer report, but you can’t see print icon when you run the report in browser. If so, please follow these steps:
    If you can’t see the print icon either when running the report in visual studio, you may have set ShowPrintButton to False in Properties window, then please set it to True.
    If there is print icon in visual studio but not in browser, please update the .NET Framework on your web server to the latest version, because the print icon is by default hidden in some version of browser. For more information, you can refer to the relevant
    link below:
    http://blogs.msdn.com/b/selvar/archive/2013/12/20/reportviewer-2012-control-not-showing-print-icon-when-viewed-from-ie-11-desktop-mode.aspx
    If the problem is not resolved, i would appreciate it if you could give us detailed description of your problem, it’s better to provide the version of ReportViewer and browser, it will help us move more quickly toward a solution.
    Thanks,
    Wendy Fu

  • Insert OLE Object at runtime in a report (Crystal report 2008)

    Hello
    I need insert a WORD document at runtime into Crystal report 2008.
    Is it possible do it this using RAS SDK for .NET?
    Thank you

    Possible, but remember that only the 1st page of the word doc will be added - same as in the CR designer.
    There is a number of sample apps at [this|http://www.sdn.sap.com/irj/boc/samples?rid=/webcontent/uuid/80774579-b086-2b10-db91-ed58c4dda375] link. Add image sample may be good to look at.
    Also see [this|Display byte array image or ole object in Section through dynamic code?; thread.
    Ludek
    Follow us on Twitter http://twitter.com/SAPCRNetSup
    Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

  • Graph which should display the data of a view object not visible

    Hi,
    I have a main page which contains a <af:panelAccordion> component with three <af:showDetailItem> components. Each of these <af:showDetailItem> components contain a page fragment. In each of these page fragments are a <af:table>, <dvt:pieGraph>, <dvt:lineGraph> and a <dvt:areaGraph> which represent data of view objects.
    In the first <af:showDetailItem> window all components are visible. But when I click on another <af:showDetailItem> all components are visible except the <dvt:areaGraph>. Weird is when I insert a <af:commandLink> into the page fragment without any functions. Also the link doesn't invoke any mehtod and partial submit is set to false. Now when I click on this link the <dvt:areaGraph> with its data become visible and show the data.
    The area graph and the line graph have partial triggers set to the table. Because when another row in the table is selected, the area and line graph should show data which is dependent on the selected row of the table.
    Has anybody an idea?
    Thanks in advance!
    Edited by: user13061309 on 27.07.2010 06:53

    Hi Frank,
    thanks for your response.
    I created a fragment-based flow and dragged it onto the main page as a region component. The main page contains the panelAccordian with its showDetailItem's. Each of the showDetailItem components of the panelAccordian contain such a region component.
    Now I set the partial trigger's property of the region component pointing to the showDetailItem component which contains the region but nothing changed. The graph is still not visible at the first click on the detailItem. I also set the trigger's property of the region component pointing to the panelAccordian but also nothing happens.
    Regards
    Michael
    Edited by: user13061309 on 06.08.2010 03:00

  • Indesign transparency multiply pdf/x-1a pdf/x-4 export pdf object not visible

    Hello,
    I've created a simple Indesign cs4 document under osx demonstrating the problem. I've copied from an Indesign document a rectangle with a fill color 100% cyan and a transparency effect multiply and paste the object within a new created document. I've paste the same rectangle again and switched off the transparency effect. Then I've create a new rectangle again with the same fill color and multiply transparency effect.
    When I create a pdf with the standard pdf/x-4 settings the copied rectangle with the multiply transparency effect has disappeared, while the other 2 rectangles are visible. Creating a pdf with the standard pdf/x-1 settings in Indesign, then all 3 rectangles are visible.
    I've created a zip file named Indesign.zip with the following 3 elements:
    - multiply.indd - indesign document
    - pdfx1.pdf - export pdf with pdf/x1 settings (3 rectangles are visible)
    - pdfx4.pdf - export pdf with pdf/x4 settings (only 2 rectangles are visible)
    Opening the document with CS5 and creating pdf files, we obtain the same strange result.
    You can download the zip file from the following link:
    http://www.symeta.be/symeta/static/files/Indesign.zip
    How do we explain this peculiar problem?
    Regards,

    Peter, John,
    If there is no solution finding corrupt objects before going to production (creating pdf files), then the problem is only detected when the job is printed! More important, if the corrupt object is located in an advertisement, then you customer wouldn't pay.
    To further investigate the problem I've create 2 snippets with the following names:
    - Snippet_Good_PDFx4_Result.idms (snippet of the object who's visible after conversion to pdf/x-4)
    - Snippet_Wrong_PDFx4_Result.idms (snippet of the object who's not visible after conversion to pdf/x-4)
    You can download these snippets from the following link.
    http://www.symeta.be/symeta/static/files/Snippets.zip
    When I replace the following 4 lines from the bad snippet:
                                <PathPointType Anchor="0.21122640285165062 35298.673065771356" LeftDirection="0.21122640285165062 35298.673065771356" RightDirection="0.21122640285165062 35298.673065771356"/>
                                <PathPointType Anchor="0.21122640285165062 35440.40534923592" LeftDirection="0.21122640285165062 35440.40534923592" RightDirection="0.21122640285165062 35440.40534923592"/>
                                <PathPointType Anchor="141.94350986741858 35440.40534923592" LeftDirection="141.94350986741858 35440.40534923592" RightDirection="141.94350986741858 35440.40534923592"/>
                                <PathPointType Anchor="141.94350986741858 35298.673065771356" LeftDirection="141.94350986741858 35298.673065771356" RightDirection="141.94350986741858 35298.673065771356"/>
    With the following 4 lines from the good snippet:
                                <PathPointType Anchor="154.96062992125985 161.1023622054882" LeftDirection="154.96062992125985 161.1023622054882" RightDirection="154.96062992125985 161.1023622054882"/>
                                <PathPointType Anchor="154.96062992125985 302.8346456700551" LeftDirection="154.96062992125985 302.8346456700551" RightDirection="154.96062992125985 302.8346456700551"/>
                                <PathPointType Anchor="296.6929133858268 302.8346456700551" LeftDirection="296.6929133858268 302.8346456700551" RightDirection="296.6929133858268 302.8346456700551"/>
                                <PathPointType Anchor="296.6929133858268 161.1023622054882" LeftDirection="296.6929133858268 161.1023622054882" RightDirection="296.6929133858268 161.1023622054882"/>
    Then the result is ok!
    The bad one has very strange coordinate values, such as 35298.673065771356 which is about 12452 mm! When placing the bad snippet in a new Indesign document the result is ok, just after converting to pdfx/4 the object isn't visible anymore!
    Who can justify this strange behaviour?
    Regards?

  • Section not visible in the report painter

    Hi Gurus,
    I created a report painter report for showing the P&L statement for a company code. I had to added a new section for calculating the statistical key figures. I was able to display the 2 sections initially, but later after changing some layout the keyfigures section is not visible anymore.
    Please let me know how can I retrieve the Key figures section.
    Thanks

    Hi Christian,
    And if you execute the report you don't see the second section?
    Yes, I am able to see the section in the edit mode and not when execute the report.
    In the report layout "formatting / report layout" in the area "rows / treatment of zero rows" are the rows hidden if the value is zero?
    The standard section layout has zero rows hidden. I tried changing it to print zero rows, but that didn't help.
    Maybe you have a selection where you only have zero values in this section so it does not appear?
    I was able to see the section in execute mode once, but then I tried to change the layout which caused me this problem. Please let me know if you have any other inputs.

  • Custom attributes added to user objects not visible in OWA address book

    Hi,
    I am using Exchange 2013 and recently added a new custom attribute in the user object properties using the details template editor to be visible in the GAL  The new attribute is correctly getting displayed in the GAL from outlook clients but not visible
    in OWA address book. Is there a way to update the display of user objects in OWA address book to include the new custom attribute?
    Thanks!

    Hi Abu,
    Please see following link:
    Customize Details Templates
    http://technet.microsoft.com/en-us/library/ms.exch.toolbox.detailstemplate(v=exchg.150).aspx
    It says, Use the Details Templates Editor to customize the client-side graphical user interface (GUI) presentation of object properties that are accessed by using address lists in Microsoft Outlook.
    My understanding is this setting only visible in Outlook.
    Please correct me if there is any misunderstanding.
    Thanks
    Mavis
    Mavis Huang
    TechNet Community Support

Maybe you are looking for