Oleautomgr.cpp

Please has anyone encounter this error message while using report generator 1.0.1 with Office XP? My Labview version is 6.0.2.
I have implemented all the suggestions described under www.ni.com/failure for this error message, the problem still persist. The program works fine with Office XP.
Attachments:
error.JPG ‏18 KB

This seems to be a duplicate of this post. If my suggestions have not resolved this issue, please let me know in the original post.
Scott Y

Similar Messages

Fatal Internal error: "oleautomgr.cpp", line 2832

Hi,
I have a program developped with LV 8.2.1.
Now I have import this application with LV 8.5; if I run the VIs in Labview it works; when I run my program (executable version) I got this error
"Fatal Internal error: "oleautomgr.cpp", line 2832"
I got the error after I open a Diadem connection.
Another information: first time I have import the program in LV 8.5 and I have save the prj, LV ask me to overwrite all the VIs of the "Diadem addons". (Diadem connectivity); so I have uncheck "read only" in Diadem.llb and I have save the Vi.
Someone can help me?
Thanx a lot

For the community's future reference, this issue was resolved by the customer calling in for support, at which time it was determined that a Mass Compile of the VIs was necessary to eliminate the error. The process to mass compile is described here.
-Sam F, DAQ Marketing Manager
Learn about measuring temperature
Learn how to take voltage measurements
Learn how to measure current

Fatal Internal error: "oleautomgr.cpp", line 2832 when sending data by means of ActiveX methode

I have experienced error "Fatal Internal error: "oleautomgr.cpp", line 2832" during sending data to CAN card IXXAT iPCI-I XC16/PCI. LabVIEW communicates with that card by means of ActiveX methodes via "VCI Wrapper" which is COM object interface. Mass compiling of the project does not help. Card is initialized and configured propely. The driver card is working propely.
LabVIEW version is 8.5
The efect of that error is that labview completly shot down.
I appraciate any suggetions
thanks a lot

Hello,
Please try to reinstall the drivers for the CAN card, then make sure you close all references to the ActiveX control (at all levels) using the Automation Close primitive in LabVIEW.
Regards,
Emil

Error when running ocx-function

Hello,
when i trty to run ocx-functions (which are working when called not using LV) then i get the attached error-popup.
Fatal internal error oleautomgr.cpp line 2832
What cani do to make it run?
Using LV 8.5
Thx for all help
Solved!
Go to Solution.
Attachments:
LV-error.jpg ‏25 KB

Hi OnlyOne,
Did you tried a mass compile of the folder where your files are localted?
See also http://digital.ni.com/public.nsf/allkb/AA97C01071D7CF678625695100582F40?OpenDocument
and this forum http://forums.ni.com/ni/board/message?board.id=170&message.id=269481&requireLogin=False with the linked knowledge base.
Regards
TomBaum

Error in visualizing a Data Form "WDEFGenerator.cpp"

Hi,
I have migrated an HFM application from version 4.01 SP2 to version 11.1.2.1
Everything works fine appart from an error in visualizing a Data Form:
In the previous version of HFM this error was not verified.
If I disable the option SuppressNoDataRows I get no errors but I would like to keep this option enabled.
Does anyone know what could be the problem?
The error I'm getting is:
Error Reference Number: {3783BC27-A47D-463A-9F21-5E1C2B55A775};User Name: hypadmin@Native Directory
Num: 0x80070057;Type: 0;DTime: 6/19/2012 4:41:11 PM;Svr: BMI-2K8-HFMPA;File: WDEFGenerator.cpp;Line: 1407;Ver: 11.1.2.1.103.3505;
Num: 0x80070057;Type: 0;DTime: 6/19/2012 4:41:12 PM;Svr: BMI-2K8-HFMPA;File: WDEFGenerator.cpp;Line: 3284;Ver: 11.1.2.1.103.3505;
Num: 0x80070057;Type: 0;DTime: 6/19/2012 4:41:12 PM;Svr: BMI-2K8-HFMPA;File: WDEFGenerator.cpp;Line: 3166;Ver: 11.1.2.1.103.3505;
Num: 0x80070057;Type: 0;DTime: 6/19/2012 4:41:12 PM;Svr: BMI-2K8-HFMPA;File: CHsvWebFormGeneratorACM.cpp;Line: 3687;Ver: 11.1.2.1.103.3505;
Num: 0x80070057;Type: 0;DTime: 6/19/2012 4:41:12 PM;Svr: BMI-2K8-HFMPA;File: CHsvWebFormGeneratorACM.cpp;Line: 3389;Ver: 11.1.2.1.103.3505;
Num: 0x80070057;Type: 0;DTime: 6/19/2012 4:41:11 PM;Svr: BMI-2K8-HFMPW;File: CHsvWebFormsACV.cpp;Line: 569;Ver: 11.1.2.1.103.3505;
And the data form script is:
ReportType=WebForm
ReportLabel=1_1_12_1
ReportDescription=Trade Receivables > 12 months
BackgroundPOV=S#ACT.w#<Scenario View>.V#<Entity Currency>.A#[None].I#[ICP None].C1#[None].C2#[None].C3#[None].C4#[None]
SelectablePOVList=Y{[Hierarchy]}.P{[Second Generation]}.E{GRBRA000.[Base]}
C1=C1{FL_CURR.[Base]}
R1=A#3_03_01.I#[ICP Entities],AddMember:I{CONS}
R2=A#3_03_01.I{CONS}
R3=A#3_03_02.I#[ICP Entities],AddMember:I{ASS}
R4=A#3_03_02.I{ASS}
R5=A#3_03_03.I#[ICP Entities],AddMember: I{PARENT}
R6=A#3_03_03.I{PARENT}
R7=A#3_03_04,NoSuppress
R8=A#3_03_1.I#[ICP Top],CustomHeaderStyle:font: bold,NoSuppress
FormRowHeight=20 px
PrintNumRowsPerPage=10
PrintNumDataColsPerPage=3
SuppressNoDataRows=True
ShowLabels=True
SuppressColHeaderRepeats=False
HeaderOptionAccount=ShowLabel,ShowDescription,Length:50
HeaderOptionICP=ShowDescription
HeaderOptionCustom1=ShowDescription
HeaderOptionCustom2=ShowDescription
Thanks
Best Regards

Hi
Check they have the "Data Form Write Back from Excel" role in Shared Services.
See p.133 of the security guide for more info -
http://docs.oracle.com/cd/E17236_01/epm.1112/hss_admin_1112200.pdf
Regards
jpr

CPP Assertion Error when navigating in Obiee 11g

Hi,
I have a report which uses SQL filters and I am trying to navigate from this report to another page.
And I see the following error :
Dashboard Display Error
Assertion failure: isXsiTypeSqlExpression(rExpr) at line 67 of C:\ADE\aime_bi\bifndn\analytics_web\main/project/webreport/exprformulautils.cpp
Error Details
Error Codes: ACIOA5LN
Some forums mentioned that re-creation of saved SQL filters would help but it didn't.
Has anyone faced similar errors ?
Thanks for any pointers.
- Sujana

Sujana,
This is a bug in 11g, apply patch 12561330.
Rgds,
Dpka

After System Update last night, the system will not boot with IOPlatformExpert.cpp:1504 error

I have had Lion for a 2, 3 months on the iMac 27 inch purchased last October (2011). Last night I chose to update the system, and deselected iMoves update because it was 1GB, and chose only 4 updates, including iTunes, Safari (i think)... But the update says error, and ask to restart the system (it won't restart itself, so I waited 30 minutes, and then pressed the Power button for 10 seconds, to let it power down, and press Power again to power it up).
However, after that, the system failed to boot up, showing a
panic(cpu 0 caller .....)" "Unable to finder driver for this platform: \"ACPI\". ... xnu-1699.26.8/iokit/Kernel/IOPlatformExpert.cpp:1504
This is not typical of the upgrade process. So I searched the Internet forIOPlatformExpert.cpp:1504 and some people said it is a hard drive error, but then I powered down and pressed Options when booting up, and was able to boot to Windows 7 (bootcamp)... and was able to boot to the "Recovery", which let me choose
Restore from Time Machine Backup
Reinstall Mac OS X
Get Help Online
Disk Utility
what should I do now to fix it so that it can boot again?

This error is caused by one of the updates you applied, namely the Thunderbolt Software Update 1.2. Many people have been affected by it, including me. I did what Linc Davis has suggested above to fix it. The most extensive discussion about the problem, with ways to fix the problem, is here:
https://discussions.apple.com/thread/4020399?start=0&tstart=0

Adobe Media Encoder (CS5) has encountered an error (WinFile.cpp-759)

I have a 714 MB Xvid file that I want to split into smaller pieces. I have gone successfully through a similar process earlier with a larger Xvid file using the same version of Adobe Media Encoder (CS5). It appears that no matter which output video format I choose, the process crashes with the following error message shown in a new pop-up dialog:
"Adobe Media Encoder has encountered an error. [..\..\Src\Win\WinFile.cpp-759].
(Even the source program file line number 759 in the above error message is always the same, regardless of my chosen output file format.)
The only option available from this point onwards is the "Continue" button. When I click Continue the program terminates with the Windows program crash message "Adobe Media Encoder CS5 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. <Debug> / <Close program>"
My search for other similar problem reports revealed that some user(s) has/have experienced a very similar problem in CS4, but the source line number was slightly different in CS4. Both problems are probably caused by the same error in Adobe's software. The small difference in source line numbers is probably due to some (minor) and probably unrelated changes to this C++ source module (WinFile.cpp).
It might of course be the case that this particular input video file has some rare encoding or other embedded problem. However, the fact that I can view the video without problems using Windows Media Player does not support this theory.
Apart from this message board I could not find any other avenue to report this bug to Adobe (without paying for support - which I am obviously not going to do as this is clearly a programming bug in the software). Hopefully some Adobe developer responsible for Media Encoder maintenance will read this forum from time to time and would subsequently inspect the source module for any obvious defects. I could supply the source video file with which this problem can be reproduced at will.
Regards
Jouni Juntunen

CS4 Adobe Media Encoder & FMLE are two different softwares - you can post your query here:http://forums.adobe.com/community/ame

Adobe Media Encoder CS4 Error: WinFile.cpp-754

When encoding video from one format to another (no matter what is source and what is result file format) I have an error after some time or in the begining of the process. "Adobe Media Encoder has encountered an error ..\..\Src\Win\WinFile.cpp-754"
Version of Encoder is 4.2.0.006 (updated).
I can't encode any files. What is the problem?

Any update on this?
I get WinFile.cpp-754 on CS4 and WinFile.cpp-785 on CS5 trying to encode the same AVI file.
I'm trying to load a 59.94 fps AVI file into PremierPro CS4 and need to convert it to something else (correct?)

Adobe Media Encoder Error with MPEG2 Formats [../../src/Command.cpp-2519]

I am trying to use some of my presets using MPEG2 format and it is giving me this error: [/Volumes/BuildDisk/builds/ame602_mac/main/app/frontend/prj/mac/../../src/Command.cpp-251 9]. I try the system presets that use MPEG2 and I get the same error. I notice if I try to make a new preset, I do not even have the option to choose MPEG2. I only get MPEG4 or MPEG4 (Legacy). I am using AME 7.0.2; if anyone has an idea on why I can't use MPEG2 please let me know.
Thanks,
Mike

Hi mboory,
Please mention the exact version of Media Encoder CS6 that you are using and also the version of operating system. Please check the below link as well.
http://forums.adobe.com/message/4402558
Regards,
Vinay

Adobe Media Encoder error when encoding: winfile.cpp-759

Mods: Please move this to the appropriate thread wasn't sure to move it to Premiere or Flash
I receive this error when trying to encode AVI to H.264 using Adobe Media Encoder CS5 (64bit):
When searching through the forums, several suggestions for CS4 and current releases that I have tried are:
clearing the media cache through AME, and the folder location in %APPDATA%\Adobe\Common\
installing K-Lite Codec pack
changing the media cache files folder to a separate disk entirely
updating to the latest version (at the time of post ver 5.0.1.0)
uninstalling and re-installing AME (as an error might have occurred during updates)
verifying that the CPU has SSE support and is enabled
I expanded my search to google which gave similar errors (winfile.cpp-754, winfile.cpp-758, etc.) and a few responses were uninstalling any Nero products (don't have any burning programs on this computer - unless you count Windows)
The system that I have is:
MS Windows 7 64-bit
Intel Core 2 Quad Q6600 @ 2.40GHz
2x 1.0GB Dual-Channel DDR2 @ 800MHz
512MB GeForce 9600 GHz
2x 250GB HDD Mirrored
External USB 500GB HDD
Any ideas as to what the cause of this is?
LK.

The information about installing codecs packs is true. It usually does more damage to your codecs already present with software already installed on your computer, and the registry settings even after removing it. That is why it is in good practice to do full image back ups monthy, saving the latest 3 for when I utilize last resort methods such as codec packs.
Adobe CS5 software has been working fine on my computer ever since its installation July. I forgot to mention that I have successfully used Premiere Pro CS5 for editing a dozen files ranging from SD small res to HD 1080i. This also includes just using AME CS5 itself for transcoding files for supported playback on different devices. I notice a greater difference in speed when using a more up to date machine that uses a GTX 285 card for GPU playback - a lot faster and smoother.
I have a 2nd, slightly older computer, that houses an extra drive I put in there to use as a scratch disk. I occasionally add that disk to the computer that has CS5 currently installed as a scratch disk for editing video. The external USB drive is used to store the final product and my backups.
This error has only come up 1 time out of the 49 files I have encoded that usually run 10 minutes to 1.5 hours. I had 9 AVI files in the encoding queue and it always stopped at this 1 particular file. I skipped the file and encoded the rest successfully, but I want to know why it causes an error in AME because this has never happened before. I have even used it on a more up-to-date machine spec wise, thinking that there is a 1% possibility that it doesn't like my computer. The same error was produced. The 9 files that I did encode are roughly the same video and audio format - just this one is the error.
I gave the file to my friend who was supposed to analyze before I got home - I usually assist them in PC problems and built his better-than-mine PC.
Any other suggestions for this error and/or a solution?
Lk

Adobe Media Encoder error [..\..\Src\RenderFrame.cpp-199]

Adobe Media Encoder error [..\..\Src\RenderFrame.cpp-199]
I'm trying to utilize Prelude to actually TRANSCODE some R3D material. Since R3D clips are spanned, Prelude can 'reassemble' them. (I don't understand why AME can't do this since Prelude uses AME... but...)
I get this error when trying to start the transcode in Prelude... any help out there?
Thanks!

Hi mboory,
Please mention the exact version of Media Encoder CS6 that you are using and also the version of operating system. Please check the below link as well.
http://forums.adobe.com/message/4402558
Regards,
Vinay

What is memory.cpp at line 1038?

We have been running the same test in LabVIEW for a few years. Now all of a sudden, we are starting to get a memory.cpp error at line 1038. The test normally runs days at a time (~2 weeks), but we are getting this error after about 18-24 hours. Any ideas of what could cause this? Could this be caused by any Windows XP hotfixes? We are using LabVIEW 7.1 on a windows xp machine.

I've already checked out that particular site for info. And we do open and close files in our tests. And we do have quite a few loops. But it has worked with no issues for a few years and much longer time spans (and also more open/close files and loops). So after the error occurred on our only two machines (with exact set up) that run LabVIEW 7.1 (the rest are still on 6), we rolled one back to a date before all of the hotfixes occured and we have had no problems since. The second machine had an issue with rolling back so IT came and reinstalled XP. The problem is that they install an updated version and we cannot install an older one. It has Service Pack 3 in it and I think there are some hotfixes that came along with it that are the source of the problem. But I can't gaurantee it. Hopefully we'll figure it out soon.

Inconsistency between R3 and APO. - not getting reconciled in CCR or CPP.

Hi,
We have a PO that is not getting reconciled in CCR and CPP.
it give the message
Unit of conversion from H to KG for the Product "ABCD" is not possible.
this PO has 3 products and off which only one is not getting reconciled. rest two are showing correctly in APO and R3.
The conversion is not maintained in material master for the rest for the two products also....
i have a similar set up in my quality environment. i tired to change the PO with some qty and it refelcts in APO immediately..
Any idea on where the conversion is not happening correctly???
Thanks
Aswath

Hi,
Have u activated detailed application CIF log. Can you check the error details in APO using t-code /n/SAPAPO/C3 or in ECC using t-code CFG1.
Can you also try to send the queue using /n/SAPAPO/CPP. CCR will show no error only when there are no queues in SMQ1 or SMQ2 of both the systems and also no queue pending in postprocessing.
Best regards,
Vaibhav

JNI Invocation: open file in Java, write file in CPP

Hello,
Warning: I am a dunce, bad CPP code ahead!
Using JNI invocation, I am trying to read a binary file in Java and write it in CPP.
Everything compiles and runs without error, but the input and output jpg files are of course different.
TIA to any help,
kirst
(begin ByteMe.java)
import java.io.*;
public class ByteMe
    // Returns the contents of the file in a byte array.
    public byte[] getBytesFromFile(String strInfo) throws IOException
        System.out.println("Testing:" + strInfo);
        File file = new File("1.jpg");
        InputStream is = new FileInputStream(file);
        // Get the size of the file
        long length = file.length();
        // Create the byte array to hold the data
        byte[] bytes = new byte[(int)length];
        // Read in the bytes
        int offset = 0;
        int numRead = 0;
        while (offset < bytes.length
               && (numRead=is.read(bytes, offset, bytes.length-offset)) >= 0) {
            offset += numRead;
        // Ensure all the bytes have been read in
        if (offset < bytes.length)
            throw new IOException("Could not completely read file "+file.getName());
        // Close the input stream and return bytes
        is.close();
        return bytes;
    public ByteMe()
          //System.out.println("in constructor");
}(end ByteMe.java)
(begin ByteMe.cpp)
#include <stdlib.h>
#include <string.h>
#include <jni.h>
#include <windows.h>
// for file operations:
#include <fstream>
int main( int argc, char *argv[] )
     JNIEnv *env;
     JavaVM *jvm;
     JavaVMInitArgs vm_args;
     JavaVMOption options[5];
     jint res;
     jclass cls;
     jmethodID mid;
     jstring jstr;
     jobject obj_print;
     options[0].optionString = "-Xms4M";
     options[1].optionString = "-Xmx64M";
     options[2].optionString = "-Xss512K";
     options[3].optionString = "-Xoss400K";
     options[4].optionString = "-Djava.class.path=.";
     vm_args.version = JNI_VERSION_1_4;
     vm_args.options = options;
     vm_args.nOptions = 5;
     vm_args.ignoreUnrecognized = JNI_FALSE;
     // Create the Java VM
     res = JNI_CreateJavaVM(&jvm,(void**)&env,&vm_args);
     if (res < 0)
          printf("Can't create Java VM");
          goto destroy;
     cls = env->FindClass("ByteMe");
     if (cls == 0)
          printf("Can't find ByteMe class");
          goto destroy;
     jmethodID id_construct = env->GetMethodID(cls,"<init>","()V");
     jstr = env->NewStringUTF(" from C++\n");
     obj_print = env->NewObject(cls,id_construct);
     // signature obtained using javap -s -p ByteMe
     mid = env->GetMethodID(cls, "getBytesFromFile", "(Ljava/lang/String;)[B");
     if (mid == 0)
          printf("Can't find ByteMe.getBytesFromFile\n");
          goto destroy;
     else
          jbyteArray jbuf = (jbyteArray) env->CallObjectMethod(obj_print,mid,jstr);
          jlong size = jsize(jbuf);
          printf("size is: %d\n", size); // size shown in output is
          std::ofstream out("data.jpg", std::ios::binary);
          out.write ((const char *)jbuf, 100000);
     destroy:
         if (env->ExceptionOccurred())
            env->ExceptionDescribe();
    jvm->DestroyJavaVM();
}(end ByteMe.cpp)

Hello,
Me again. Well, not such a dunce after all. Here is code that works correctly, and compiles with no errors and no warnings.
Will much appreciate help with clean-up code.
TIA,
kirst
(begin ByteMe.java)
import java.io.*;
public class ByteMe
    public long getFilezize(String strInfo) throws IOException
          // demonstrates String parameter passed from CPP to Java:
          System.out.println("(getFilesize) Hello world" + strInfo);
          File file = new File("1.bmp");
          InputStream is = new FileInputStream(file);
          // Get the size of the file
          long length = file.length();
          is.close();
          return length;
    // Returns the contents of the file in a byte array.
    public byte[] getBytesFromFile(String strInfo) throws IOException
        System.out.println("(getBytesFromFile) Hello world" + strInfo);
        File file = new File("1.bmp");
        InputStream is = new FileInputStream(file);
        // Get the size of the file
        long length = file.length();
        System.out.println("length is: " + String.valueOf(length));
        // Create the byte array to hold the data
        byte[] bytes = new byte[(int)length];
        // Read in the bytes
        int offset = 0;
        int numRead = 0;
        while (offset < bytes.length && (numRead=is.read(bytes, offset, bytes.length-offset)) >= 0)
            offset += numRead;
        // Ensure all the bytes have been read in
        if (offset < bytes.length)
            throw new IOException("Could not completely read file "+ file.getName());
        // Close the input stream and return bytes
        is.close();
        return bytes;
    public ByteMe()
          //System.out.println("in constructor");
}(end ByteMe.java)
(begin ByteMe.cpp)
          Signature obtained with command:
               "C:\Program Files\Java\jdk1.5.0_15\bin\javap.exe" -s -p ByteMe
               Compiled from "ByteMe.java"
               public class ByteMe extends java.lang.Object{
               public long getFilezize(java.lang.String)   throws java.io.IOException;
                 Signature: (Ljava/lang/String;)J
               public byte[] getBytesFromFile(java.lang.String)   throws java.io.IOException;
                 Signature: (Ljava/lang/String;)[B
               public ByteMe();
                 Signature: ()V
     Compiled VC++ 2005 Express, run on Vista
#include <stdlib.h>
#include <string.h>
#include <jni.h>
// file operations
#include <fstream>
int main( int argc, char *argv[] )
     JNIEnv *env;
     JavaVM *jvm;
     JavaVMInitArgs vm_args;
     JavaVMOption options[5];
     jint res;
     jclass cls;
     jmethodID mid;
     jmethodID sizeid;
     jstring jstr;
     jobject obj_print;
     jlong filesize;
     options[0].optionString = "-Xms4M";
     options[1].optionString = "-Xmx64M";
     options[2].optionString = "-Xss512K";
     options[3].optionString = "-Xoss400K";
     options[4].optionString = "-Djava.class.path=.";
     vm_args.version = JNI_VERSION_1_4;
     vm_args.options = options;
     vm_args.nOptions = 5;
     vm_args.ignoreUnrecognized = JNI_FALSE;
     // Create the Java VM
     res = JNI_CreateJavaVM(&jvm,(void**)&env,&vm_args);
     if (res < 0)
          printf("Can't create Java VM");
          goto destroy;
     cls = env->FindClass("ByteMe");
     if (cls == 0)
          printf("Can't find ByteMe class");
          goto destroy;
     jmethodID id_construct = env->GetMethodID(cls,"<init>","()V");
     printf("%s\n",id_construct);
     jstr = env->NewStringUTF(" from C++!\n");
     if (jstr == 0)
          // Normally not useful
          printf("Out of memory (could not instantiate new string jstr)\n");
          goto destroy;
     obj_print = env->NewObject(cls,id_construct);
     //BEGIN BLOCK to get file size
     sizeid = env->GetMethodID(cls, "getFilezize", "(Ljava/lang/String;)J");
     if (sizeid == 0)
          printf("Can't find ByteMe.getFilezize\n");
          goto destroy;
     else
          printf("got here\n");
          filesize =(jlong) env->CallObjectMethod(obj_print,sizeid,jstr);
          printf("got filesize\n");
     // END BLOCK to get file size
     // BEGIN BLOCK to write file
     mid = env->GetMethodID(cls, "getBytesFromFile", "(Ljava/lang/String;)[B");
     if (mid == 0)
          printf("Can't find ByteMe.getBytesFromFile\n");
          goto destroy;
     else
          jbyteArray ret =(jbyteArray) env->CallObjectMethod(obj_print,mid,jstr);
          // Access the bytes:
          jbyte *retdata = env->GetByteArrayElements(ret, NULL);
          // write the file
          std::ofstream out("data.bmp", std::ios::binary);
          //out.write ((const char *)retdata, 921654);
          out.write ((const char *)retdata, (long)filesize);
     // END BLOCK to write file
     destroy:
         if (env->ExceptionOccurred())
            env->ExceptionDescribe();
    jvm->DestroyJavaVM();
}(end ByteMe.cpp)

Oleautomgr.cpp

Similar Messages

Maybe you are looking for