Olioweb QOS error and Test Run is not compliant
Hi,
I made 3 tile setup and test is failing for Olioweb QOS. When I run first 2 tile, test runs fine and run is compliant. Later I ran oly 3rd tile and test run is compliant without any issue.
When I start all 3 tiles together I get olioWeb QOS error for first 2 tiles. Sometimes all 3 tiles gives OlioWeb QOS error.
Attached the result.
Please look into it and let me know if anthing need to be changed in setup.
Thanks,
Suresh
jpschnee,
I have run only olioweb workload for all the three tiles and I do not see any failure in Olioweb.wrf. I have attached the result for the run. It looks like clean run when only Olioweb load is ran.
Again I ran the 3 tile for all workloads . I observed QOS error happens for all three tiles. i.e olioweb workloads. previosuly only for 2 tiles it gave QOS error.
I am trying to find the subsystem which is saturating in my setup. As I asked I am expecting some alarms from Vcenter when resources peaks to its max.
I am seeing CPU is taking less than 70% in all ESXi Servers. Memory less than 20%.
Disk Max latency is less than 20ms.
Network is max 500Mbps for 10G network connectivity.
Do you see above resource utilization problematic?>
Thanks,
Suresh
Similar Messages
-
148:3, is showing up as an error and my program will not run, what to do ?
148:3, is showing up as an error and my program will not run, what to do ?
Error 148:3 is a licensing error for Adobe Paid apps like Photoshop or Flash Professional...
WHERE exactly are you seeing this error? -
i am trying to download i tunes to my laptop which is running on windows 8. However everytime i try to instal it, i get a message saying there were errors and i tunes is not configured. my system is not modified, can anyone help.
Hi sarah0407,
Welcome to the Support Communities!
The article below may be able to help you with this issue. You may need to remove more than just the iTunes software. Click on the link to see more details and screenshots.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923?viewlocale=en_US
Cheers,
- Judy -
I tried to download Tetris yesterday onto my laptop - not quite what you would call an ambitious gamer!
As it was doing so I noticed that the software was trying to alter some settings in the registry.
Now whenever I am in Mozilla I get a pop up saying my PC has 7 window errors and can run faster. I cannot see how to get rid of this.
When I copy the link location it says:
https://secure-ams.adnxs.com/click?KGIRww5jtj8oYhHDDmO2PwAAAICXbtI_KGIRww5jtj8oYhHDDmO2Py8cBrFeTaRkUe4MK_5ewBbHVyJRAAAAAMypEAA_AQAAPwEAAAIAAAAwB0YA6-ECAAAAAQBVU0QAVVNEACwB-gDulQAA42kAAQMCAQUAAIQARiCzrAAAAAA./cnd=%21ngVsMQjTqzoQsI6YAhjrwwsgBA../referrer=https%3A%2F%2Fwww.google.co.uk%2F/clickenc=http%3A%2F%2Fappround.net%2Fpcperformer%2Fst6%2Fpcperformer-st6.php%3Fcid%3D3902%26tid%3Dams1CNHcs9ji35fgFhACGK-4mIjrq5PSZCIOMjEzLjc4LjE0NC4yMTQoAQ..
and here is the image
Any ideas?Such a pop-up is likely caused by malware installed on your computer.
Do a malware check with some malware scanning programs on the Windows computer.<br />
You need to scan with all programs because each program detects different malware.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware:<br>http://www.malwarebytes.org/mbam.php
*SuperAntispyware:<br>http://www.superantispyware.com/
*Microsoft Safety Scanner:<br>http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: Home Page:<br>http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
*Spybot Search & Destroy:<br>http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan:<br>http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*http://support.kaspersky.com/viruses/solutions?qid=208280684
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked -
when syncing with itunes, got error message saying had error and now ipad2 will not do anything other than showing the USB cable with arrow pointing to Itunes on screen. have done the reset and restart, but still get same thing. Ipad does not show up in itunes even though cable plugged in. Have shut down and restarted Windows 7 computer.
I had done all of that to no avail. I did call Apple Tech Support and after he suggested I try a USB port in the rear of the Win 7 computer, things starting working again. I had tried switching the USB port at the front of the machine but that had not helped. Everything is good to go again. thanks for your reply
-
please help guys my ipod touch not working and its in error and my home botton not working too from month how i can reset it and can i reset it from computer ?
You can't reset the iPod with the Home and Power buttons. All y can do is restore the iPod.
Place the iPod in recovery mode using one of these programs if necessary to allow the restore.:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
For MAC or PC
The Firmware Umbrella - TinyUmbrella -
I go through the process of burning a DVD from a Premier Pro Project and at the end of the process I get an encoding error and the dvd does not start burning. How do I fix this?
adam@honestmusky wrote:
Yes I am using encore. I used to have no problem doing this, but I had to get a new computer and now something isn't working right.
How about some DETAILS?
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
Also describe the EXACT steps you take to go from Premiere Pro to Encore -
I was updating my iPhone 3GS, left it overnight and woke up to find that there was an error and my IPhone could not be restored. What can I do to make my phone work again? Have I lost all the data?
If your phone is in recovery mode, all data are gone. Connect the phone to iTunes on your computer and restore.
-
my photoshop elements12 will not update says error and contact adobe but not open now for help. windows vista
I need the updates because I just purchased a Nikon D60 and my Photoshop does not read the .NEF files produced by the camera.
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
Do you really mean the Nikon D60 which shipped in 2008? Was it purchased secondhand?
The Nikon D60 was first supported in Adobe Camera Raw 4.4.
Photoshop CS4 ships with Camera Raw 5.0 so it can read D60 NEF files out of the box. No updates required.
If you do mean the D60 then something else must be going on. e.g. are you using Nikon software to transfer files from camera to computer? -
Staging area error and universal installer does not run
Everything was ok. I installed Oracle 9i r 2, AS 9.0.2, iFS 9.0.2.
Then I uninstall AS and iFS. But AS folder remains there (with inventory,contentsXML.. folder inside), even if I deleted it, when I tried to install AS again I get the error staging area error, and the folder appears again.
Another thing is that in oracle universal installer the installed and deinstall products options do not do anything. I only can select the install option
Did I do something wrong during the AS uninstall?
What Can I do now?
Thanks for your help,Try looking here:
http://www.thomasfly.com/Oranux/#Step-by-step
follow these steps/configs and the install will go quite nice! -
Hi ABAP experts,
I'm calling CJ44 Tcode in my program via "call transaction". Afterwards I doing my own other things.
How can I get the value of "Test run" checkbox so I can run "my own things" only if the real run is performed?
Any idea, suggestion?
Thanksjpschnee,
I have run only olioweb workload for all the three tiles and I do not see any failure in Olioweb.wrf. I have attached the result for the run. It looks like clean run when only Olioweb load is ran.
Again I ran the 3 tile for all workloads . I observed QOS error happens for all three tiles. i.e olioweb workloads. previosuly only for 2 tiles it gave QOS error.
I am trying to find the subsystem which is saturating in my setup. As I asked I am expecting some alarms from Vcenter when resources peaks to its max.
I am seeing CPU is taking less than 70% in all ESXi Servers. Memory less than 20%.
Disk Max latency is less than 20ms.
Network is max 500Mbps for 10G network connectivity.
Do you see above resource utilization problematic?>
Thanks,
Suresh -
I am geeting the error in Test run.
Dear Friends,
i am getting this error
Division by zero not performed
Calculation rule ZPPF/810 RTE=TSDIVI RTE-TSDIVP RTEKGENAU RTE
When i am increasing the salary of the person.
How should i handle this.
kindly respond me asap.
i am getting error in the test run.
Regards,
sai prasad.ya its solved.
the main problem why i am getting the error when i am running payroll is that i dint not maintain some importent country specific infotypes properly. thats the reason its showing me errors.
i maintained them properly and finally the error is resolved.
Thanks once again to the reply from our friends.
Regards,
sai prasad -
Create customer date trough class cmd_ei_api - error in test run
Hi all,
I try to use class cmd_ei_api to create customer. It works fine but one thing is strange.
When I pass data with test run and customer is in a group with internal nummering system icrease number every time when i run program. Customer is not created ( that is good) but the assigned nummer is lost.
I tried to use method maintain_bapi and maintain.Problem occurs every time.
Do you have the same problem? Do you know solution of this problem?
regards,
JG
SAMPLE CODE:
report zcreate_customer.
data: wa_header type cmds_ei_header,
wa_central_data type cmds_ei_vmd_central_data,
wa_central_datax type cmds_ei_vmd_central_data_xflag,
wa_address type bapiad1vl,
wa_addressx type bapiad1vlx,
wa_tax_ind_st type cmds_ei_tax_ind,
wa_tax_ind type cmds_ei_cmd_tax_ind,
wa_bankdetail_st type cvis_ei_cvi_bankdetail,
wa_bankdetail type cvis_ei_bankdetail,
wa_company_code_st type cmds_ei_company,
wa_company_code type cmds_ei_cmd_company,
wa_functions_st type cmds_ei_functions,
wa_functions_t type CMDS_EI_FUNCTIONS_T,
wa_functions type cmds_ei_cmd_functions,
wa_sales_data_st type cmds_ei_sales,
wa_sales_data type cmds_ei_cmd_sales,
wa_customer type cmds_ei_extern,
wa_customers type cmds_ei_main,
wa_correct type cmds_ei_main,
wa_defective type cmds_ei_main,
wa_mes_correct type cvis_message,
wa_mes_error type cvis_message.
constants: c_update type c value 'M',
c_insert type c value 'I'.
PARAMETERS: p_test type c as CHECKBOX DEFAULT 'X'.
start-of-selection.
free: wa_customer, wa_company_code_st, wa_customer.
wa_address-name = 'CUSTOMER NAME'.
wa_address-city = 'CITY'.
wa_address-postl_cod1 = '28-500'.
wa_address-street = '1400 9TH ST W'.
wa_address-country = 'PL'.
wa_address-langu = 'L'.
wa_address-region = 'FL'.
wa_address-sort1 = 'SORT1'.
wa_address-sort2 = 'Sort2'.
Assign address data directly
wa_customer-central_data-address-postal-data = wa_address.
wa_addressx-name = 'X'.
wa_addressx-city = 'X'.
wa_addressx-postl_cod1 = 'X'.
wa_addressx-street = 'X'.
wa_addressx-country = 'X'.
wa_addressx-langu = 'X'.
wa_addressx-region = 'X'.
wa_addressx-sort1 = 'X'.
wa_addressx-sort2 = 'X'.
wa_customer-central_data-address-postal-datax = wa_addressx.
wa_customer-central_data-central-data-ktokd = 'OKRA'.
wa_customer-central_data-central-data-STCD1 = '8291004247'.
wa_company_code_st-task = c_insert.
wa_company_code_st-data_key-bukrs = '1000'.
wa_company_code_st-data-zuawa = '009'.
wa_company_code_st-data-akont = '0000201100'.
append wa_company_code_st to wa_company_code-company.
append wa_customer to wa_customers-customers.
call method cmd_ei_api=>maintain_bapi
EXPORTING
iv_test_run = p_test
iv_collect_messages = 'X'
is_master_data = wa_customers
IMPORTING
es_master_data_correct = wa_correct
es_message_correct = wa_mes_correct
es_master_data_defective = wa_defective
es_message_defective = wa_mes_error.
if wa_mes_error-is_error is initial and p_test is INITIAL.
commit work AND WAIT.
else.
ROLLBACK work.
endif.Hi experts, I am using cmd_ei_api to create customer. Each time when I create the customer, for the customer number KUNNR, first the method picks a new number from number range, if I don't supply one in program. Then it makes the necessary checks on customer data. If data check is success, customer is created and everything is okay. But if the check is failed, no customer gets created in the Data base, but the picked number is lost forever. Is there a way to avoid this?
The same happens, even when I ran it in Test Mode(iv_test_run = 'X'). A number is lost irrespective of whether the test run is success or not.
I tried supplying the customer number via the program. I this case also, I had to get a number from the Number Range and supply. As the Method validates whether the supplied number belongs to the right number range, I cannot use any dummy number(not even for a Test run). Also it validates whether a customer exists in KNA1 with the supplied number.
As a work around, now I am supplying the last number of the number range for the test run(which I have hard coded ~not a good practice!!). If this runs error free, I will pick a new number and creates the customer.
regards,
anish
sample code...
*-- Fill customer parameters to lwa_master_data
lwa_customer-header-object_instance-kunnr = '99999'.
* *** ~~
*-- Test Run with dummy customer no. for data check
IF lwa_master_data IS NOT INITIAL.
CALL METHOD cmd_ei_api=>maintain
EXPORTING
iv_test_run = 'X'
is_master_data = lwa_master_data
IMPORTING
es_error = lwa_es_error.
*-- Create customer if Test Run Succeeds.
IF lwa_es_error is INITIAL.
*-- Get new Customer Number
CALL METHOD cmd_ei_api=>get_number
EXPORTING
iv_ktokd = as_customer-ktokd
IMPORTING
ev_kunnr = lv_kunnr
es_error = lwa_getno_msg.
IF lv_kunnr is NOT INITIAL.
*-- Supply new customer number
CLEAR: lwa_master_data, lt_customer.
lwa_customer-header-object_instance-kunnr = lv_kunnr.
APPEND lwa_customer TO lt_customer.
CLEAR lwa_customer.
lwa_master_data-customers = lt_customer.
*-- Initialize Global and Current Customer Buffer
CALL METHOD cmd_ei_api=>initialize.
*-- Create Customer
CALL METHOD cmd_ei_api=>maintain
EXPORTING
iv_test_run = ''
is_master_data = lwa_master_data
IMPORTING
es_error = lwa_es_error.
*-- Proceed if no error with customer creation
IF lwa_es_error is INITIAL.
* ******************* * ******************* ~~ -
I have Adobe Flash Builder 4.7 with air 15. I am using as3 PureMVC swc. The application works and logins to my server during development and testing. But the issue comes when I deploy the application in IOS 8. The login does not work. Can anyone help. Thanks in advance.
Just as an add on note. What we can't determine is when the SWF file is run either in a a flash player 9 or with IE
it does not work. (i.e. no email and variable that is sent back is undefined) In flash player 10, it warns about some
security settings.
but in FLASH CS4 authoring environment, using the test movie, ctrl+enter, it runs like a champ, sends the email, gets
the variable back.
The server its being run on is a LAN based IIS server for Intranet use. So the local PC is connecting to it fine in "Test movie" mode.
but if you run that swf any other way, its does not work for love nor money! How do you debug for that! The asp code was even cut down
to a simple HELLO WOLD example and that still did not work. Of course it did work in Test Movie mode! -
Downloaded it, and it created a setiup error and wont run setup
my computer is running windows ME. I downloaded firefox and when I go
to run set up it pops up with a setup error and will not open. HelpFirefox 3.* versions will not run on Windows ME, the last version for Windows ME was Firefox 2.0.0.20 available from ftp://ftp.mozilla.org/pub/mozilla.org/firefox/releases/2.0.0.20/win32/
Maybe you are looking for
-
Can't open project files after upgrading to FCE 3.5.1
I bought a new MacBook Pro and sold my PowerMac, so I bought the 3.5 upgrade to FCE. I was using 3.0 before on my PowerMac. I copied my project over, but when I try to open it it just gives me a dialog box with "General error" and an OK button. How d
-
I have a macbook, an ipad, and an iphone with the Mail app on all three synced through icloud, but when I read and delete emails on my phone, the inbox on my ipad is not update, so I have to go through and mark as read or delete messages again. How
-
Officejet 6310 all in one will no longer communicate with pc.
router died. had to replace. tried reloading drivers&set up. this pc pluged into router as is printer . All phones and notebooks work fine!! what up??
-
Fetching details from the URL Link
Hi Experts, I need a help on the webdynpro, for capturing few details from the url used to call the webdynpro application. My client has designed the scenario such that, They have designed thier intranet in dotnet. For accessing the webpage designed,
-
CSAP_MAT_BOM_MAINTAIN does not update records in 3.0 Version ??
Dear Friends, I am working on 3.0F Version.I have a requirement where when there is an update in the BOM from the 3rd party system, that changed field or quantity should be updated in the BOM. I tried using CSAP_MAT_BOM_MAINTAIN and when I enter the