OM 2007 and 2012 Integrated Console

Customer have both OM 2007 R2 and 2012 R2 environment, but they don’t want two different consoles.
We plan to customize a console to collect data from 2007 and 2012, thus customer could only check single console on daily operation.
However, we don’t have table schema for OM 2007 and 2012, the only way to do this is through SDK?
Or any other suggestions could meet their requirements? Thanks.

Hi,
Based on my research, there is a possibility to install both consoles on the same desktop / laptop machine following this post:http://scug.be/dieter/2012/07/25/scom-install-both-scom2007r2-and-scom2012-console/
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Very handy if you need to monitor both scom 2007 and scom2012 environments.
Regards,
Yan Li
Regards, Yan Li

Similar Messages

SCCM 2007 and 2012 coexistence and Cross Forest support

Hi All
I have a question
My company has recently acquired another company
That company exist of 2 forests (forest A has one domain namely domain A : and forest B has one domain namely domain B) with a two way forest trusts between them
Domain A has a SCCM 2007 primary Site
Domain B has a SCCM 2007 primary site and 2 secondary Sites
The active directory schema is extended in both domains
We cannot migrate the SCCM 2007 environment because it is a mess , so we want to build a new SCCM 2012 R2 environment into Domain B and from that environment manage both domains (OSD, software deployment client management ...)
We want to install a SCCM 2012 R2 (CU3) primary server into domain B and add two distribution points instead of the two secondary sites and manage both forests (domain A and B) from that primary site server
Now my questions are
1 )
Can an SCCM 2007 environment coexist with a SCCM 2012 environment?
I believe it can If I make sure that in the new SCCM 2012 environment we only use boundary groups for content locations and not for site assignment and in the SCCM 2007 environment (domain A and domain B) I need to disable the client push account.
2)
Discovery , How do we make sure that systems and users are discovered from both domains?
Do we need to do some additional configuration to make that happen or will this be no problem because of the Two way trust and active directory schema extension.
3 )
Can we do all the management from the new SCCM 2012 R2 site , also OSD deployments for both domains ?
I hope someone can help me with these questions
Thanks in advance
Regards
Johan

Hi All
After talk with management and local support the decision is made not to deploy only distribution points but instead deploy secondary sites (of course with management point and distribution point) because the bandwidth to these sites is a
problem.
So the situation will be Domain A Primary site (SCCM 2012 R2) and for both remote locations a secondary site , domain B a secondary site (of course all the related ports need to be opened for both domains as explained here https://technet.microsoft.com/en-us/library/hh427328.aspx
Question
Can we do all the management from the new primary SCCM 2012 R2 site (domain A) , also OSD deployments for both domains A and B ?
I hope someone can review this
Thx in advance
Regards Johan

Re-use network share for SUP downloads between SCCM 2007 and 2012?

We currently have network folders created to download software updates for SCCM 2007. Now that we are bringing up SCCM 2012, can I point SUP downloads to those same folders so I don't need to duplicate file space for both SCCM environments? Is
the structure the same so either SCCM can pull from them to their respective DPs?
Thanks!
Russell

No, you can't directly use the same folders and files for the package source locations. You can specify the 2007 folder as a source to download content from though when downloading updates.
Are you really that concerned about 20-50GB though? If so why? You should be using cheap storage for this.
Jason | http://blog.configmgrftw.com | @jasonsandys

SCCM 2007 and 2012 Catalogs have a slight discrepancy when adding AR XI (11.0.10) update

SCCM 2007 does not display the Bulletin and Article IDs, whereas SCCM 2012 does. Can this be corrected for SCCM 2007as well?

Ben,
If you're referring to SCUP 2011 (Download System Center Updates Publisher 2011 from Official Microsoft Download Center), we are already using this in our environemnt. Yes... SCCM 2007 is supported by SCUP 2011.

Moss 2007 and 2012 server (sql server 2008 r2)

Currently
1 sharepoint server (window 2003)
1 sql server (window 2003) running sql server 2005
want to go
1 sharepoint server (window 2008 R2)
1 sql server (window 2012) running sql server 2008 R2
Anyone know if that will work?

Yes, it will work. Refer to the following articles for more information
https://technet.microsoft.com/en-us/library/cc288690(v=office.12).aspx
http://blogs.msdn.com/b/mikewat/archive/2008/08/11/upgrading-sharepoint-sql-servers-to-sql-server-2008.aspx
Cheers,

SCCM 2007 and 2012 local cache folder

I have created a package with install action action that first unzips a zip file into the CCM cache folder then perfoms other actions using the unzipped files. Would that cause any problems? I've "heard"
should one not muck around in the Cache folder...

ConfigMgr does try to clean the cache up based on certain criteria so it's possible this may interfere with that. Best to always use a folder not controlled by a specific application like the Windows\Temp folder.
Jason | http://blog.configmgrftw.com

Difference between Scom 2007 and Scom 2012 Gateway server setup.

Hi All,
Greetings!!
I would like to know the differences for gateway server setup in Scom 2007 and 2012 versions..
Are there any changes in the data collection or in the configuration? and also the prerequisites for it.
Please let me know these info..
Regards,
Gokul

There is no great different in settng up gateway server in SCOM 2007 R2 and SCOM 2012. As summary, it requires
1.Request certificates.
2. Import those certificates into the target computers by using the MOMCertImport.exe tool.
3. Distribute the Microsoft.EnterpriseManagement.GatewayApprovalTool.exe to the management server.
4. Run the Microsoft.EnterpriseManagement.GatewayApprovalTool.exe tool to initiate communication between the management server and the gateway
5. Install the gateway server.
However, the prerequisites has different between SCOM 2007 R2 and SCOM 2012
SCOM 2007 R2 gateway server support folloiwng OS
Windows Server 2003 Standard Edition with Service Pack 1 (SP1)
Windows Server 2003 Standard Edition with Service Pack 2 (SP2)
Windows Server 2003 Standard x64 Edition with SP1 or SP2
Windows Server 2003 Enterprise Edition with SP1
Windows Server 2003 Enterprise Edition with SP2
Windows Server 2003 Enterprise x64 Edition with SP1 or SP2
Windows Server 2003 R2 Standard Edition with SP1 or SP2
Windows Server 2003 R2 Standard x64 Edition with SP1 or SP2
Windows Server 2003 R2 Enterprise Edition with SP1 or SP2
Windows Server 2003 R2 Enterprise x64 Edition with SP1 or SP2
Windows Server 2008 Standard 32-Bit with SP1 or SP2
The 64-bit edition of Windows Server 2008 Standard with SP1 or SP2
Windows Server 2008 Enterprise 32-Bit with SP1 or SP2
The 64-bit edition of Windows Server 2008 Enterprise with SP1 or SP2
Windows Server 2008 Datacenter 32-Bit with SP1 or SP2
The 64-bit edition of Windows Server 2008 Datacenter with SP1 or SP2
Windows Server 2008 R2
Windows Server 2008 R2 with SP1
SCOM 2007 R2 gateway server
CPU :2.8 GHz or faster
Memory: 2 GB of RAM or more
available Space: 20 GB of available hard disk space
NET Framework 2.0
Microsoft Core XML Services (MSXML) 6.0
SCOM 2012 Gateway server
Disk space: %SYSTEMDRIVE% requires at least 1024 MB free hard disk space.
Server Operating System: must be Windows Server 2008 R2 SP1, Windows Server 2012, Windows Server 2012 Core Installation or Windows Server® 2012 R2.
Processor Architecture: must be x64.
Windows PowerShell version: Windows PowerShell version 2.0, or Windows PowerShell version 3.0.
Microsoft Core XML Services (MSXML) version: Microsoft Core XML Services 6.0 is required for the management server.
.NET Framework 4 is required if the Gateway server manages UNIX/Linux agents or network devices.
Roger

MS Outlook 2007 and SBO outlook integration OK?

I have a client that has MS outlook 2007 installed on some client machines and would like the SBO integration as well, has anyone done this yet and have there been any issues?
Thanks! Amy

Hi Amy,
What version of SBO are you running? We've had problems with Outlook 2007 and Outlook Integration (eg getting the OI toolbar to display properly) when running SBO 2007A.
You can get more details by logging your question with SAP Support but, for what it's worth, my recommendation is avoid it at the moment if you can.
Kind Regards,
Owen

CRM 2007 _ Portal Integration

Hi all,
I have installed and configured CRM 2007 with Portal 7.0 as described in IMG.But still i am getting an error in some portal iviews "CRM and Portal RFC Destination has not been configured Correctly".
Does anybody have any steps for Configuring CRM 2007 and Portal Integration or any Url.
Thanks
Harini

Muralidhar,
I browsed through the notes and i couldnt find any relevant information on EP 7.0 and CRM 2007. I have configured portal (Ep 7.0) with CRM 5.0, BI 7.0, ECC 6.0 and SRM 5.0. Problem i am facing is only specific to CRM 2007 and Portal Integration not an general Portal Problem.
Thanks for the info.
Harini

SCVMM and SCOM 2012 Integration Issues

Hello, I have integrated SCOM 2012 RTM and SCVMM 2012 RTM and am having lots of issues that were not present with 2007/2008 family integration. For starters, my SCOM environment manages multiple untrusted domains, etc. When enabling VMM integration
I now get hundreds of alerts about "Unable to verify Run As Account", stating that is cannot login as the VMM service account for all clients that don't live in same domain as SCVMM server. For starters why do my physical servers, and all VMs need
to be distributed with this account? The alert is also expected logically, because this is impossible to distribute a Run As account to every agent in a multi-domain untrusted environment. Also according to this configuration, the Virtual
Machine Manager Connection Account created in SCOM is set to less secure (distributed to all agents), which is why the alert is coming up; additionally less secure setting is typically bad practice. Why does SCVMM do this by default? Can it be
changed? What are options here? It seems to me only the SCOM management server should need this Run As account, not every agent? Thoughts on this? Thanks!

I'm running SCVMM 2012 R2 and OpsMgr 2012 R2. I have the integration setup and have had the same issue with the RunAs account logging on to workgroup computers.
I tried changing the account distribution to More secure and only targeting my two management servers and the VMM server. I also changed the profile so that it targeted only the Windows Computer object for the same three servers. I came in this
morning and I do not have the "Run As Account Could Not Log On" message anymore on the workgroup computer, but now I have an alert "VMM Agent Not Monitored By Operations Manager" for the VMM server. I look at the Health Explorer and see that the agent
is reachable but its not being monitored.
I tried changing the RunAs profile back to "All Targeted Objects" but monitoring still didn't restart. Then I tried restarting the OpsMgr agent and then the VMM agent, but still the status did not change. Now, I have just set the account back
to Less secure and have again received the warning from the workgroup computer about not being able to log on. I'll wait a little longer to see if the VMM server begins to be managed.
Any experience with this?

SSRS 2012 integrated with Sharepoint 2013, subscription and impersonation

Hello,
We are configuring SSRS 2012 integrated with Sharepoint 2013. The reports are connecting to SSAS cubes via shared Datasources. We have defined user based roles and security in the cubes and would like to pass the effective username to the cubes when they
access data via reports.
Also we need to create subscriptions on these reports to run on either daily/weekly or monthly schedule and send email to a list of users.
How do we configure our Datasources on sharepoint so both could be acheived.
Our Database and Sharepoint are on different servers.
Thanks
Deepak

Hi Deepak
For your first question:
while configuring the datasource in SharePoint, check the option 'Set execution context to this account' in the settings. This will pass the effective user name to the cubes.
Thanks
Bala

Is it possible to have a server with both a 2007 DP role and 2012 DP role?

Is it possible to have a server with both a 2007 DP role and 2012 DP?
A client has been sold that as part of the migration the vendor will continue use the existing 2007 servers as DPs, and add the 2012 DP role as part of the migration - then at some future point remove the 2007 role.
Sounds a bit wonky to me, it would be great to have your insights, some MS documentation or case study - to either provide a level of comfort or give me some foundation to chime in and request they adjust their expectations... I haven't found anything yet.
It's not side by side technically, more of concurrent migration?
Thank's for your insights.

Shared DPs are available if you are performing a migration but that's about it.
https://social.technet.microsoft.com/Forums/en-US/5185f83d-af0b-47a2-a6e9-5940a2cef7e2/can-sccm-2012-dp-and-sccm-2007-distribution-point-share-a-server-without-migrating?forum=configmanagergeneral
http://windowsitpro.com/system-center/q-can-i-share-distribution-point-between-configuration-manager-2007-and-configuration-
http://blogs.technet.com/b/system_center_in_action/archive/2012/04/26/distribution-point-migration-from-configuration-manager-2007-using-the-migration-feature-of-system-center-2012-configuration-manager.aspx
-Nick O.

Can we install Exchange server 2003, 2007 and 2010 on Server 2012 R2 ?

Sir,
I want to know whether Exchange server 2003, 2007 and 2010 can be installed on Server 2012 R2 or not.
Thanks in advance.

You can only install Exchange 2013 SP1 on Server 2012 R2
As far as I know Exchange 2010 SP3 can't be installed on R2 . The other Exchange Servers are too old

Scom 2007 and scom 2012 agent multi home

is there version limit for the agent multihom for scom 2007 and scom 2012?
In technet i found it for SCOM upgrade it mentioned need scom 2007 CU4 and above, how about for multihome approach for SCOM agent?
Besides that, instead of agent upgrade, could we perform agent uninstallation scom 2007 and reinstall scom 2012?
Thanks for your advice.

Hi Cylim,
You can upgrade your agents to SCOM 2012 only from SCOM 2007 R2 CU4. Please look at these helpful links:
http://blogs.technet.com/b/kevinholman/archive/2014/01/20/do-i-need-a-specific-cumulative-update-release-ur-in-order-to-upgrade-to-scom-2012-or-2012-sp1-or-2012-r2.aspx
http://blogs.catapultsystems.com/cfuller/archive/2012/05/31/quicktricks-multi-homing-an-agent-to-opsmgr-2012-scom-sysctr.aspx
http://blogs.catapultsystems.com/cfuller/archive/2014/04/02/multihomed-migrations-in-operations-manager-lessons-from-the-field.aspx
As Scott mentioned, you can uninstall SCOM 2007 agent and install SCOM 2012 agent on one or a few servers, and see if they report properly to both management groups SCOM 2007 and SCOM 2012:
http://dynamicdatacenter.wordpress.com/2012/10/15/om-2012-agent-report-to-scom-2007-not-r2-scom-2012/
Natalya

Migate from Sccm 2007 to 2012 and WSUS functionality

We are doing a side-by-side migration from 2007 to 2012.
At present WSUS is installed on the same server as SCCM 2007.
If we do a side-by-side migration, can we use the existing WSUS on the 2007 server whilst in co-existance?
or will we have to install WSUS on the new SCCM 2012 as a full replica.
cheers Mike

You can migrate from 2007 but you need to configure the new environment with exactly the same products and classifications or the migration will fail - you cannot choose some and omit others.
I agree with grundlichkeit and Jörgen. Why would you migrate years of updates for no good reason? Don't worry about XP.
If we do a side-by-side migration, can we use the existing WSUS on the 2007 server whilst in co-existance?
or will we have to install WSUS on the new SCCM 2012 as a full replica.
So, in answer to your question, no you would not re-use the 2007 WSUS. You would also not have a replica on the 2012 server. You would start afresh.
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

OM 2007 and 2012 Integrated Console

Similar Messages

Maybe you are looking for