OM integrated with pay roll
hi,
can u please let me know about the om integratiion with pay roll or pa what is the procedure.
Thanks,
Waqas
Payroll is generated based on entries in PA... IT0, 1, 7, 8, 9, 14, 15, etc....
Cost Centers assigned to Units/Positiions are used while generating Payroll and used in postings to Cost/Finance,
Thre is also a concept of Position Substitution, where in salary can be processed/cost can be distributed based on the subsittution.
Thus, OM and PA are very much integrated with Payroll.
As our gurus explained, PLOGI ORGA should be maintained. PA-PY integreation is standard, these integration parts u can find thru V_t582A, and also Schema/PCRs..
Regards
...Sadhu
Similar Messages
-
Business scenario..for ISU and integration with R/3 modules..
Scenario:
1. Client is providing Utility services to the customer and also to its own employees.
The service is also consumed by the employees who are treated as contract partners in ISU. The constraint is that the utility bill has to be deducted from their payroll, which is deducted monthly using a wage type from their pay roll, which is in SAP R/3.
2. Similarly some of the contract partners are also vendors to the client (the vendor and contract partner is same). The consumption of utility bill is adjusted to the payment made by the client to vendor.
Questions :
1. How we can deduct the utility bill of the employees from their payroll. Is there any integration of ISU with HR ?
2. Also how can we clear the receivables in FICA since data can be pushed from FICA to FICO thru reconciliation keys but not vice versa ?
3. How can the utility bill be deducted from vendors account and there is no standard link between vendor master to contract partner in ISU.
Can anybody suggest any standard solution for these two scenarios or any work arounds .
Early solutions are highly appriciated
Thanks and RegardsHello,
Please look into my answers below:
Questions:
1. How we can deduct the utility bill of the employees from their payroll. Is there any integration of ISU with HR?
i. There is no integration between ISU with HR. What you need to do is that create separate account determination id <say HR> and use this id in Contract account to identify that a particular contract account is an employee related ID.
ii. Now at the end of the day or month collect the O/s balances of all the employee contracts in a form of flat file, use a BDC program to update the data in the HR table PA0014 <Please confirm with your HR colleague too> so that their pay would be = Actual payroll-Amount due.
iii. After the above step, make sure that you run FPY1 <Payment run program> to clear all employee open items. You can have a separate payment method for Employees and attach the same in contract account
iv. You can create a separate Z table to map Employee ID with a contract number so that during creation of flat file in step 1.ii above, your job becomes easier.
2. Also how can we clear the receivables in FICA since data can be pushed from FICA to FICO thru reconciliation keys but not vice versa?
i. Please refer to point 1.iv above. You need to run FPY1 Payment run to clear employee receivables in FICA.
3. How can the utility bill be deducted from vendors account and there is no standard link between vendor master to contract partner in ISU.
i. There is no integration between ISU with AP. What you need to do is that create separate account determination id <say AP> and use this id in Contract account to identify that a particular contract account is a Vendor related ID.
ii. Now at the end of the day or month collect the O/s balances of all the vendors in a form of flat file, use a BDC program to update the data in the AP table BSIK so that amount to be collected from vendor = Actual amount-Amount due.
iii. After the above step, make sure that you run FPY1 <Payment run program> to clear all Vendor open items. You can have a separate payment method for Vendor-Contract Accounts and attach the same in contract account
iv. You can create a separate Z table to map Vendor number with a contract number so that during creation of flat file in step 1.ii above, your job becomes easier.
Additional points to be considered
1. Check if at all separate clearing rules are needed for Employee- Contract accounts, Vendor-Contract Accounts & other contract accounts.
2. Verify FM COMPUTE_CONTRACT ACCOUNT_BALANCES is useful in obtaining the balances of contract accounts <I do not have SAP ISU active system with me else I would have provided correct FM>
3. There may be performance issues based on the volumes of the data.
Rgds
Rajendra -
Why two pay roll area fields in Pay roll Driver?
Hi experts,
Can some body educate me with the significance of two pay roll areas in the pay roll driver program?
One field in Payroll period block and another in Selection block.
Thanks in advance.
RSS.Hi RSS
The payroll area of the payroll period in payroll driver is for determining time period.
Please refer to the following doc for this payroll area:
Payroll area for determining time period
Payroll programs process different personnel areas and employee subgroups in different payroll periods. A payroll area groups the employees for whom the payroll is to be run on the same date irrespective of their status (salaried employee, industrial worker).
The program which retrieves data for payroll accounting selects records on the basis of payroll area. The payroll area defines the selection period but not the personnel numbers that are selected.
Use
The following options are available for the "Payroll area", "Payroll period", and "Payroll year" fields:
Payroll area without period and year
The payroll area is used to determine the current payroll period from the control record. The payroll period is the period for which payroll is to be run. This value is set as the data and person selection period.
Payroll area with period and year
The exact period is determined from the payroll area, period and year entries. This value is set as the data and person selection period.
The payroll area of selection in payroll driver is for payroll accounting area. Please refer to the following doc:
Payroll Area
A payroll accounting area (which is often abbreviated to payroll area) is an organizational unit containing all of the employees for whom the payroll runs at the same time.
Use
The payroll usually runs for payroll accounting areas. Each payroll accounting area determines the specific dates for which the payroll runs, the earliest payroll period for which retroactive accounting is possible, retroactive accounting recognition, and the periods for which the payroll runs.
Hope it is helpful
Regards.
Jun -
List of emp for whom rebate is not considered in pay roll
hi experts,
can any one help me to get the list of employees for whom rebate is not considered for income tax calculation in pay roll run.
its urgent.
thanks in advance
shivaAs suggested try with wage type reporter identify the wage type for rebate and execute it for all employee so that you will get information for whom it is considered.
Regards
Venkatesh -
Siebel new LDAP adapter integration with BI Publisher
Hi All!!
We have configured our Siebel (8.1.1.3) security adapter with LDAP. BI Publisher is using Siebel security model.
We had to clone our AOM (fins_esn which is using the security adapter LDAP) to finsxx_esn because we are migrating the AD 2000 to 2008 (we are also changing the domain). The roll out will last 2 month, users will be migrated by branch, it wont be a big bang.
We have to generate a new LDAP security adapter to authenticate users who are logging to finsxx_esn to the AD 2008 (AD 2008 is on a diferent domain than AD 2000. This is working for application autehtication, no problems found here)
On a standalone environment report generation is working. But for a distributed environment (1 AOM, 1 NAOM, 1 Web Server) is not working.
Does anyone knows how to integrate to BI Publisher when you have two LDAP security adapters on Siebel Application? Or is there any authentication method to use instead of "Siebel Security" so as to achieve this?
RegardsWe actually ran into a similar problem where I work. I created a support web ticket for our issue and the response is that BIP 11G is not supported for integration with Siebel 8.1, or any other version for that matter. Oracle is currently working on a fix to integrated the latest version of Siebel with BIP.
There advice to me was to downgrade to BIP 10G for the time being. -
Seimens HMI Integration with SAP MII
Dear MII Experts,
We are trying to integrate shop floor systems with SAP MII for discrete manufacturing industry.
I came across the client has 70+ machines in the plant .the vendor is "DMG"
Seimens HMI is installed on each machine .
What are the possible ways here to connect to PLC from MII
I am very new to this integration part .
Can MII directly connect to Seimens HMI .
I am very new to this area , client is ready to pay extra cost for any extra interfaces .
Please suggest me the architecture to follow .
Please give me a detailed explanation here , please correct me if I my explanation is wrong here
Please reply me for any other clarificationHi Eswaraiah,
To access the PLC data in MII, you would need couple of things more.
1. OPC Server where the PLC stores the data.
2. PCo (SAP Plant Connectivity) that can read the data from OPC Server and send the data to MII for manipulation.
From PCo MII can read the data and you can then perform your business logic. Also, PCo has built-in notification settings which can trigger MII's transactions based upon some conditions.
So I believe, your landscape would look like
Siemens HMI --> OPC Server -> PCo --> MII
Check these out...
PLC Integration with SAP MII
Connecting MII to PLC devices
Communicating with PLC
Regards
Tufale Ashai -
Web based reporting engine integrated with APEX
Hello,
I would like to use some completely web-based reporting solution for my application. My idea is that I will create some datasource, prepare database query and publish some data columns to end users (datamodel). They will choose from many of prepared data areas, create their own report using some intuitive web-based report designer and save it. I do not need it for any analytic purposes, no dynamic filters, graphs and other widgets, no BI. It will be all only about building text based reports with few dynamic fields (customer address, actual date etc..).
For example: User will prepare some document (template) with few paragraphs and add some of prepared dynamic fields into it (ie. company name, customer address, repeating table with list of employees, some image). Then he will be able to generate same document for many customers etc..
I am looking for some simple, user friendly web based application. Some external report builder for example for Jasper reports is not what I am looking for.
I will need to integrate it with Oracle 11g XE with APEX 4.2 so some API or URL parameters is must.
Used reporting engine does not be completely free, but I am able to pay max. $5000 for it
Do you have some tips?
Thank youThis could be a solution for APEX reports (interactive reports). But I want to create more complex reports, not only table based reports.
I need to create for example invoice report with some dynamic fields (customer, invoice items...), another report can be for example some contract about cooperation with some dynamic fields (contract number, personal information ...).
These reports will be mostly only text based without any table. See example bellow. How would you generate this kind of letter?
"Hello <CUSTOMER_NAME>, we would like to offer our new product <PRODUCT_NAME> to you..."
Where CUSTOMER_NAME a PRODUCT_NAME are prepared fields (from some database tables). It will be something very similar to Microsoft Word automatic mailings. User can generate many text based reports and save them as PDF.
I need to find some web based product, that will be simple for users and can be integrated with APEX. -
IOS6 iMessage is integrating with my old phone number
so i recently did the IOS 6 update... and now my imessage on my macbook is integrating with a old pay as you go number i was using while traveling instead of my permanent phone number... i would like to remove the throw away number from my imessage account and set it to my current phone number to ensure continuity of messages.
I have a related question. When setting up Messages in 10.8, I clicked yes when it presented me with my cell number. Now I'm getting text messages showing up on my Mac and I don't really want that. I can't figure out how to stop it.
-
Webcenter Spaces/Portal integration with UCM and use of FrameworkFolders
Hi All,
We are looking at the possibility of using Desktop Integration Suite organisation wide.. We are also in the process of an organisation wide roll out of Webcenter spaces.
The preference is to use FrameworkFolders because its replacing the folders_g component and address the limitations posed by folders_g (for example can have a max of only 1000 content within a folder, time to load the pages when a folder has large no of content items).
Since only folders_g can be used for integrating with Webcenter Spaces/Portal we are not sure of what our strategy should be. Is there plan to use framework folders with Webenter in the future?
Thanks,
Manjunath
Edited by: 890922 on 14-Aug-2012 18:20Since only folders_g can be used for integrating with Webcenter Spaces/Portal we are not sure of what our strategy should be. Is there plan to use framework folders with Webenter in the future?Certainly there are. Unfortunately, no exact date/release has been communicated so far. If you need a quick implementation (following few next months) I'm afraid you will have to go with folder_g
-
How will you do for November pay roll before release the Note:2082383.
< Japanese translation is below.>
Dear Experts (Especially for Responsible for Japan pay roll),
Please le me know how you will deal with November pay roll before releasing note:2082383.
(The legal change of non-taxable amount of Commuting Allowance for Car.)
Note 2082383 is going to be released by SAP on November 30.
However, Japanese low has effected since October 20 2014.
How will you deal for November pay roll for Japan before note releasing ?
Will you change V_T5J64 table by your self according to Cabinet Order #338?
Or will you just wait until SAP releasing this note ?
Do you think that SAP will provide any report for this recovery way for November pay roll if we wait SAP note releasing ?
Regards,
Mayumi
< Japanese version >
Expertの皆様
先日、官報#338が出され、10/20 より施行されていると存じます。
SAPの当該ノートは11月30日にしかリリースされないようですが、皆様、11月の給与はどのように行いますか?
V_T5J64を官報の情報に合わせて変更し、当座11月の給与を回しますか?
それともSAPのノートリリースを待ちますか?
SAPのノートリリースでは、11月の給与が古い方法で施行されたことによるリカバリレポートなど出るのでしょうか?
以上、皆様の対応方法をお尋ねいたしたく。
よろしくお願いいたします。
MayumiHi,
Ask SAP directly with regards to the way they will handle this and whether they will produce a report to recover. Speak to the Japanese revenue and explain to them that you are in this predicament and I am sure they will be able to give you a leeway till November, but still be able to report on the Oct figures.
Off course you can try the config changes yourself. Pilot the note in Dev and see if the figures make any sense. But this will be dual work as when the note gets released in Nov you will have to revisit your configs and undergo a complete check. Get in touch with SAP in my opinion!
Aran -
OIM 9.1.0 Integration with Active Directory 2008 R2
Hi,
My customer is running Root/Child AD structure based on windows 2003 w/SP2, OIM 9.1.0 deployed under one of the child domains, and integrated with child domains controllers which runs windows server 2003 as well.
My customer has decided to upgrade his AD to Windows Server 2008 R2 domain controllers across the entire AD Forest and still wants to integrate the current OIM v9.1.0 with AD for all of his Users provisioning and password synchronizations.
Am not sure if current OIM version of OIM 9.1.0 is compatible and supported by OIM v9.1.0 under active directory version 2008 / R2, and not sure if it can be integrated with such AD version.
Any guidance is really appreciated.
Also I was thinking of such scenario but also not sure of its support ability and if OIM will keep working on such scenario, the scenario is to upgrade only the AD root domain to Windows 2008 R2 while keeping the child domain holding the OIM 9.1.0 at Windows 2003 version.
Is this a working and supported scenario by OIM v9.1.0 ?I believe you question should be if the connector supports this architecture. Check out the versions supported for the connector you are using and you should be good.
-Bikash -
Service desk integration with 3rd party tool
Hi all,
I've problems understanding the setup of connecting a 3rd party service desk tool with solman itsm.
So far it's clear that I need to activate and configure the service provider and consumer in soamanager.
The webservice then will be called by the 3rd party tool with corresponding data.
However, according to spro I need to define a value mapping for incoming/outgoing calls.
I do not understand this mapping... the WSDL of webservice ICT_SERVICE_DESK_API contains lots of fields, but in spro -> value mapping I can only define the following fields (which are hard coded in type pool AIICT):
SAPCategory
SAPComponent
SAPDatabase
SAPFrontend
SAPIncidentID
SAPIncidentStatus
SAPInstNo
SAPOperatingSystem
SAPSoftwareComponent
SAPSoftwareComponentPatch
SAPSoftwareComponentRelease
SAPSubject
SAPSystemClient
SAPSystemID
SAPSystemType
SAPUserStatus
What about attachments, priority etc.?
Will the interface parameters mapped to these ones?
For what purpose do I need to maintain the value mapping?
Can you give me a hint?
Regards, Richard Pietschcan you please check the WIKI Solution manager Service Desk Integration with third party service desk - SAP Solution Manager - Security and Authorizat…
-
Java Stack mandatory for a SAP BI system integrated with EP?
Hi Guru's,
Currently we are using SAP NetWeaver 2004 s version 7.0 system for our BI.
This is integrated with the EP. But our BI system does not contain the Java Stack installed.
When we work on WAD templates and execute the template, it is automatically directed to EP portal where we can see our reports.
Here my question is do we need Java Stack for this system to use ADOBE DOCUMENT services or can it work with EP only for the web functionalities.
Any info on this is of great help.
Best Regards
KumarHI Reddy,
We came to know from our basis team that we do not have the Java Stack installed in our BI 7.x system yet.
As it is integrated with EP which has Java, our web reports are working.
1) But my question is still do we ned to install the Java Stack in our BI system as i do not find any Export to PDF option in EP for the reports (eventhough AS Java supports this).
2) Or can we use the existing configuration without Java STack integrated to EP for the new tools like Report Designer and Integrated Planning?
Regards
Kumar -
Session keep Alive when EBS is integrated with OIF acting as SP
We have an E-Business Suite R12(12.1.3) Application which is integrated with Oracle Access Manager 11.1.1.5. For authentication the Oracle Access Manager delegates the authentication request to Oracle Identity Federation acting as a Service Provider (SP). There is a home-grown SSO which acts as the Identity provider by Federating it with OIF using SAML 2.0 protocol.
The integration is successful and EBS is able to authenticate using this third party SSO.
Now there are multiple applications which are integrated with this third party SSO and the user can access any of these applications including EBS.
Considering a scenario where a user is using EBS Application say for more than 30 mins. Now when he tries to login to another application the challenge screen is thrown though he can continue to work on EBS without any issue. The reason being that the session timeout on the IDP side is set to 30 mins.
To overcome this issue the solution that has been thought of using a javascript for each page load on the application which will update the SSO token with the latest UTC time on the IDP server. This has been successfully done for all other applications except EBS.
So my question is how we can call this java script for each page load for EBS?
Thanks & Regards
SarbashisIt appears that OAM is removing the url parameters for the p_done_url sent to it by OIF.
302 Redirect to -> Location: https://sso.mycompany.com/oam/server/logout?p_done_url=https%3A%2F%2Fsso.mycompany.com%2Ffed%2Fuser%2Fsloosso%3Fid%3Dosso%26type%3D3&invokeOSFSLogout=false
Result: 200. Set-Cookie OAM-ID to expired.
Form Submits: https://sso.mycompany.com/fed/user/sloosso
Result: 500 Error
Notice the p_done_url value in the redirect has extra parameters which when the Form is submitted are lost.
If I manually enter the url: https://sso.mycompany.com/fed/user/sloosso?id=osso&type=3&invokeOSFSLogout=false
Then I am successfully logged out.
This seems almost like a bug in OAM... -
RE: Legacy Integration with PI/Open
Greg -
We are currently working on wrappering the APIs for UniVerse (aka Pick on
UNIX).
We received some help from the guys at RTD in Denver.
We tested out a C program that uses the Universe APIs and it works fine.
We will be building the Forte piece and compiling it this week.
Our first application is to inquire the UniVerse data, after that is
successful, we will move to inserting & updating.
Let us know how we can help.
Larry McCartney
[email protected]
(203)459-7959 - Trumbull
From:
[email protected][SMTP:[email protected]
om]
Sent: Monday, October 12, 1998 11:00 AM
To: [email protected]
Subject: forte-users-digest V1 #1111
forte-users-digest Monday, 12 October 1998 Volume 01 : Number
1111
In this issue:
Legacy Integration with PI/Open
is OBB32.dll available
Java Integration
Java Integration
Re: Legacy Integration with PI/Open
RE: Forms That Will Not Close
RE: Forms That Will Not Close
RE: Forms That Will Not Close
Re: AfterValueChange event trigged when it shouldn't be...
math library
From: [email protected]
Date: Mon, 12 Oct 1998 09:49:56 +1000
Subject: Legacy Integration with PI/Open
This is a bit of a long shot, but has anyone experience with integrating
Forte with PI/Open. PI/Open is a variant of PICK. We have a requirement
to read and update a PI/Open database from within our Forte application,
and we would be most interested to hear from anyone who has experience in
doing this.
We are aware of a set of APIs provided with PI/Open that are written in
"C". We could wrapper these from within Forte, however the issue is that
the APIs provided are non-shared, and Forte requires shared libraries.
Thanks in advance for any help.
Greg Barber.
The information transmitted is intended only for the person or entity to
which it is addressed and may contain confidential and/or privileged
material. Any review, retransmission, dissemination or other use of, or
taking of any action in reliance upon, this information by persons or
entities other than the intended recipient is prohibited. If you
received
this in error, please contact the sender and delete the material from any
computer.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: "sridhar t" <[email protected]>
Date: Sun, 11 Oct 1998 22:01:36 PDT
Subject: is OBB32.dll available
hi,
am working on forte3.0.G.2. when i tried to use objectbroker library i
am unable to find the runtime objectbroker library (OBB32.dll). is this
dll available with this version. if not is there any alternative.
thanks,
sridhar,
Goldstone Softech USA
Get Your Private, Free Email at http://www.hotmail.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: srinivasa gopi <[email protected]>
Date: Sun, 11 Oct 1998 23:12:22 -0700 (PDT)
Subject: Java Integration
Hello,
I'm trying to integrate Forti with Java in Java mode using IIOP.I
followed the steps as explained in the Forti Web enterprise manual.I
compiled the Java files that are generated by Forti along with the
client Java file.The Java applet is getting downloaded on the client
browser(IE 4.0), but the problem is browser is giving an exception
** Java.lang.RuntimeException can't connect to service object with
the ior file name **.
My question is on every client is it necessary for ORB(Visigenic for
Java 3.2) and also the Forti Java interoperability package that is
provided by the Forti for compatability with Java or it is not
required on the clients ?
Is there any other alternative to achieve the goal as this will give
wide access to the Forti service objects through Web Browser clients.
Please mail me the solution to this problem as early as possible it is
very urgent.
Thanks in advance,
Srinivasa Gopi,
Goldstone Softech USA
DO YOU YAHOO!?
Get your free @yahoo.com address at http://mail.yahoo.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: srinivasa gopi <[email protected]>
Date: Sun, 11 Oct 1998 23:26:26 -0700 (PDT)
Subject: Java Integration
Hello,
I'm trying to integrate Forti with Java in Java mode using IIOP.I
followed the steps as explained in the Forti Web enterprise manual.I
compiled the Java files that are generated by Forti along with the
client Java file.The Java applet is getting downloaded on the client
browser(IE 4.0), but the problem is browser is giving an exception
** Java.lang.RuntimeException can't connect to service object with
the ior file name **.
My question is on every client is it necessary for ORB(Visigenic for
Java 3.2) and also the Forti Java interoperability package that is
provided by the Forti for compatability with Java or it is not
required on the clients ?
Is there any other alternative to achieve the goal as this will give
wide access to the Forti service objects through Web Browser clients.
Please mail me the solution to this problem as early as possible it is
very urgent.
Thanks in advance,
Srinivasa Gopi,
Goldstone Softech USA
DO YOU YAHOO!?
Get your free @yahoo.com address at http://mail.yahoo.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: Tim Hagemann <[email protected]>
Date: Mon, 12 Oct 1998 09:21:06 +0200
Subject: Re: Legacy Integration with PI/Open
Greg,
This is a bit of a long shot, but has anyone experience with integrating
Forte with PI/Open. PI/Open is a variant of PICK. We have arequirement
to read and update a PI/Open database from within our Forte application,
and we would be most interested to hear from anyone who has experiencein
doing this.
We are aware of a set of APIs provided with PI/Open that are written in
"C". We could wrapper these from within Forte, however the issue isthat
the APIs provided are non-shared, and Forte requires shared libraries.Would be interersting, which operating system you're using.
You could write a dll (on windows) or shared library (on unix) wrappering
the
original,statically linked "C"-Libs. This lib could be used by Forte.
Tim Hagemann
Tim Hagemann
Ascom GmbH Email: [email protected]
Charlottenburger Allee 61 Phone: +49 241 96806 273
D-52068 Aachen Fax: +49 241 96806 225
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: "Rottier, Pascal" <[email protected]>
Date: Mon, 12 Oct 1998 09:38:25 +0200
Subject: RE: Forms That Will Not Close
Exiting the event loop will not close the window! Invoking
'Close' method on the window will. Check if this method
is executed. It appears, the AfterFinalize event exits the
event loop and nothing more. Then, your applications
waits for some event from your main window, like 'Mouse-
Enter', before invoking Window.Close().
Pascal
Hi,
We seem to be having some type of deadlock problem when trying to
close
forms and am wondering if anyone else has experienced this problem.
The
phenomenon does not always occur and is not specific to any one client
machine.
I will explain the phenomenon:
1. We have an object that contains our main application startup
method.
This method then instantiates our main application window (Control)
and
invokes the Display() method using start task.
2. All other forms created by the application are created using a form
manager service object which exists on the client partition. The form
manager has a CreateForm() method which instantiates a form class of
the
specified type and invoked the form's Display() method using start
task.
3. Each form has a Close push button which when clicked invokes
Window.RequestFinalize().
Now, the problem we have is this:
The user starts the application and the main application window is
displayed. The user then selects an option from the main window and a
child form is created using the form manager service object and is
displayed. The user can continue to create more child forms by
selecting
options from the main window and all child forms are instantiated and
displayed correctly.
However, when the user attempts to close one of the forms the form
does
not close. The finalize event is triggered and the event loop is
exited,
but the form continues to be displayed and does not close. If the user
then moves the mouse pointer over the main application window, the
child
form immediately closes. Moving the mouse cursor over other child
windows (or even the desktop) does NOT do this - only when the mouse
cursor is moved over the main window does the child form close.
Does anyone have any ideas on this?
Regards,
Jace.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive
<URL:http://pinehurst.sageit.com/listarchive/>- -
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: Jason de Cean <[email protected]>
Date: Mon, 12 Oct 1998 17:47:20 +1000
Subject: RE: Forms That Will Not Close
Hi Pascal,
The Display() method is as follows:
self.Open();
event loop
when Window.AfterFinalize do
exit;
when task.Shutdown do
exit;
end event;
self.Close();
<end>
Are you saying we should do a Window.Close() in there somewhere as well
Regards,
Jace.
On Monday, 12 October 1998 17:36, Rottier, Pascal
[SMTP:[email protected]] wrote:
Exiting the event loop will not close the window!
Invoking
'Close' method on the window will. Check if this method
is executed. It appears, the AfterFinalize event exits
the
event loop and nothing more. Then, your applications
waits for some event from your main window, like 'Mouse-
Enter', before invoking Window.Close().
Pascal
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: "Rottier, Pascal" <[email protected]>
Date: Mon, 12 Oct 1998 11:04:24 +0200
Subject: RE: Forms That Will Not Close
Jason,
No, self.Close() should close the window. This is the
method I referred to. You could place a traceline
behind self.Close() to see if it is executed. It is not
inconcievable some exception may exit the Display()
method before self.Close() is executed.
After that, maybe, some events from your main
window trigger something that causes a call like 'My-
Window.Close()', where 'MyWindow' is a subclass of
'UserWindow', so 'MyWindow' gets closed after all.
Maybe you've overridden 'Close()', so now it doesn't
work properly anymore.
Are you sure you exit the event loop after you press
the close button?? The display method is not regis-
terred for any <PushButton>.Click event, though maybe
you just didn't include the full Display method in your
mail.
Remember that an event loop will only respond to an
event if it is not currently handling an event. So, the
method behind <PushButton>.Click may call a self.
Window.RequestFinalize(), which will cause an After-
Finalize event to be posted, which will be placed in
the event queue. If this method however keeps waiting
for something, the event loop will not respond to the
AfterFinalize event, until this method is done waiting.
Pascal.
Hi Pascal,
The Display() method is as follows:
self.Open();
event loop
when Window.AfterFinalize do
exit;
when task.Shutdown do
exit;
end event;
self.Close();
<end>
Are you saying we should do a Window.Close() in there somewhere as
well
Regards,
Jace.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: Thomas Kunst <[email protected]>
Date: Mon, 12 Oct 1998 14:28:55 +0200
Subject: Re: AfterValueChange event trigged when it shouldn't be...
Which version of Fort=E9 are you using? We had some strage problems with
GUI events in Fort=E9 3.0.F.2, which disappeared now that we use 3.0.J.1!=
Fouche, Jaco wrote:
=
Hi there,
=
I'm hoping that someone out there has experienced the following (and
knows why it is happening. ) :-)
=
I have a couple of windows on which the AfterValueChange event is
triggered on a field upon hitting the delete key.
We all know that this should only happen upon leaving the field, ie. th=e
field loosing focus. The problem is that I'm trying to recreate this in=
a simple test class, but now it won't happen. I still have the original=
windows on which it is happening, but I would like to construct
something small and simple to send to Forte.
=
Any ideas as to why this could be happening?
=- -- =
Dr. Thomas Kunst mailto:[email protected]
sd&m GmbH & Co. KG http://www.sdm.de
software design & management
Thomas-Dehler-Str. 27, 81737 Muenchen, Germany
Tel +49 89 63812-221 Fax -444
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: Greg Gorham <[email protected]>
Date: Mon, 12 Oct 1998 09:51:07 -0400
Subject: math library
I need direction to the source of Forte libs that handle more scientific
math. Also included is the need for more scientific print formating. I
understand, second hand, that such material is available from third
party vendors/sources.
Thanks
Greg Gorham
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
End of forte-users-digest V1 #1111
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>Greg,
This is a bit of a long shot, but has anyone experience with integrating
Forte with PI/Open. PI/Open is a variant of PICK. We have a requirement
to read and update a PI/Open database from within our Forte application,
and we would be most interested to hear from anyone who has experience in
doing this.
We are aware of a set of APIs provided with PI/Open that are written in
"C". We could wrapper these from within Forte, however the issue is that
the APIs provided are non-shared, and Forte requires shared libraries.Would be interersting, which operating system you're using.
You could write a dll (on windows) or shared library (on unix) wrappering the
original,statically linked "C"-Libs. This lib could be used by Forte.
Tim Hagemann
Tim Hagemann
Ascom GmbH Email: [email protected]
Charlottenburger Allee 61 Phone: +49 241 96806 273
D-52068 Aachen Fax: +49 241 96806 225
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
Maybe you are looking for
-
PCMCIA Realtek Ethernet card not detected
Hi, I'm trying to use a PCMCIA Etherner Card with Realtek chip. If the card it's already plugged when booting, Udev takes 180000 ms to finish and the card doesn't work. If it's plugged while booted, dmesg shows that there's a "something" at SmartCard
-
RichEditableText textFlow problem with \n
I cant say more right now, but I have found some strange problem. We have skin with RichEditableText and we bind text property with some data from server. If there is string with \n inside whole app froze, or CPU is very high. In profiler I have foun
-
External hard drive freezes on boot.
I just bought a USB 2.0, 320gb Iomega External Hard Drive. I formatted the drive as OS X Extended (Journaled). It mounts fine once I turn it on and I can access all my files with ease but there is a problem lying under the surface. When I shutdown my
-
OBIEE 11g:Restrict Admin user (Weblogic) to upload certain set of files
Hello All, We are running OBIEE 11.1.1.7.1 on local machine. We have a requirement which should limit Weblogic (Admin user) to upload .exe, .bat, .dll file etc or any such unwanted file in catalog or should only be able to upload required files.
-
MacBook Pro fans won't speed up
I have a MacBook Pro (Early 2008) 2.6Ghz with a 200GB drive and 4GB RAM. The problem is that i.e. I'm creating a movie in iMovie, so the computer does a heavy task, the CPU works at lets say 75% and according to iStatPro, it's temperature reaches 80-