OM/PA Bug - Personnel have different Org Unit in PA.
An employee was hired into an Org Unit A. However, when I check into PA20, the employee's org unit is showing as Org Unit B.
I checked PPOME, and the Employee (Person) and his position and it is shown under Org Unit A.(the correct Org Unit.)
I check PP01 for the employee's position and it belongs to Org Unit A.
And yet when I check into PA20, the employee has Org Unit B.
How do I continue my investigation for this?
Points to those who can help.
Thanks.
Olekan
Hello Anantha and Manu,
Thanks for the prompt reply.
The employee is visible in the Staffing mode. He is placed in only one position and is 100 % for this position.
The relationship validity for the Position to the Org Unit A is valid until 12.31.9999.
Currently we have 6 of this employee that belongs to Org Unit A but is showing in Org Unit B in PA20.
Thier positions are adjacent in the staffing screen. So I think there was a mistake during creation of this positions or assignment of the pos. to employees. Or it could be a product error.
Do you think i should raise an OSS note for this?
Thanks
Regards,
Olekan
Edited by: Clueless Noobie on Dec 18, 2007 5:19 AM
Similar Messages
-
Authorisations in a Different Org Unit
We have an Organisational Unit without a Manager and the employees within that Organisational Unit will be raising requests in ESS and they will require verification of Travel, Leave etc.
We are planning to use an employee in a different Organisation Unit, not in the hierarchy above this Organisation Unit to authorise these requests.
How do we set up that employee from an Authorisations perspective to carry out this role.
Thanks
WB>
Gupta, Sheetal wrote:
> Hi
>
> As per my understanding from your question you want to divert the workflows to another manager as their is no manager in a org. unit.
The Workflow will go another employee not a Manager in a different Org Unit
>
> For this you can provide the provide the reporting manager selection option to employee by selecting the check box in the Processing processes for thr typeof leave node in ESS customization.
Not sure how you can get the name of the employee to default for this Org Unit only
>
> From this option employees will be able to select the new reporting manager if their is no manager maintained
>
> Thanks
>
> Sheetal -
CATS - How to enter times of an employee who works for 2 different Org Unit
Hi,
I am able to successfully enter times for an employee and do the approval process (CAT4) and CAT6 and I can see the records getting updated in PA30.
Scenario :
Employee works for 2 different Org Units and should be able to enter his time through Timesheet. Eg: Employee A spends 6 Hours working in Department B1 & 3 Hours in Dept B2.
The Manager of B1 should only be able to approve 6 Hours of Employee A
The Manager of B2 should only be able to approve 6 Hours of Employee A
Can somebody help me out how this can be achieved?
Regards,
MamtaHi Sameer,
Thank you for the response. Yes, when I report the times for 2 different org units I would also want the cost for that employee distributed between org units.
I tried your solution-> by entering times in CAT2 for Employee A for 2 different Cost Centers that I created.
For Department B1 --> In CAT2 I entered Cost center C1 : 6 Hours
For Department B2 -->In CAT2 I entered Cost center C2 : 4 Hours
When I go to CAT4 and try to select the employee for approval and search the employee-A Org unit wise he is displayed only in his original Department -> B1 with 10 hours (6+4). What else do you think needs to be done?
Is this anything to be done with Sender Receiver Cost Centers because the cost center C1,C2 that I created for Org Units B1 & B2 respectively are just Cost Centers. I dont know the difference between Costcenter and Sender Costcenter/Receiver Costcenter.
I will try to explain the scenario again in case I was not clear :
u2022Each employee has their home OU. However these employees may be working with multiple OU each day or the week. So potentially, the time sheet may have to be approved by multiple managers.
Regards,
Mamta -
I have created org units wrongly in om, how to delete these org units ?
plz can anyone help me.
Hi,
go to PPOME transaction code select org unit right click and delete.
you can try this report RHRHDL00 but you need to delete or delimit existing relationship first.
Regards -
Standard reporting for personnel areas per org. unit
Hi all
An HR colleague asked me for a tool to display a selected organisational unit and then show what personnel area it belongs to. They are cleaning up our master data and need this kind of cross checking but I cannot come up with any list to show this.
How would you do it? Do I have to build a query for it or is there an easier way?
Regards
JesperHi
Try this out
Step1.s_ph0_48000510 adhoc qurey or pqah
Step2.Go to org assignment folder
Step3.Select organizational unit for output
step4.Select personnel area for selection
Give input for Personnel area
and Execute Output
you get the results of orgunits belongs to given personnel area
all the best
partha
keep sharing andlearning -
Different customer have different sales unit!!!!!
Dear experts,
I have a special requirement,I don't know is it possible to do it by sap standard function, for example one material, material No:A, basic unit:pc,sale unit:box, for customer 01, 10 pc = 1 box, for customer 02, 5 pc = 1 box. I can maintain a convert factor in the material master data, but in the sales order I have to modify the convert factor for different customer. we have so many order, is it impossible to maintain different convert factor for different customer in some master data.
Thanks
LanceDear Lakshmipathi,
I am sorry,I make a mistake, my question is different customer have the same sales unit,but different convert factor!
"for example one material, material No:A, basic unit:pc,sale unit:box, for customer 01, 10 pc = 1 box, for customer 02, 5 pc = 1 box. I can maintain a convert factor in the material master data, but in the sales order I have to modify the convert factor for different customer. we have so many order, is it impossible to maintain different convert factor for different customer in some master data. " -
Org unit differring & Pay scale issue
Hi experts,
i hav e an issue .....
when i executed new office orders i am getting one org unit. & when i executed for the same employee no for existing office order i am getting diff org. unit & i am not getting Pay scale amount also.........
how can i solve this .......any suggestions.
thanks in advance
reddy
Edited by: reddy linga on Dec 14, 2009 11:28 AMElobarate
are u getting different PSL for different Org Units please let me know -
How to creat a cross - Org unit(different root org unit) reporting in OM
Hi All,
I would like to know how to creat a Cross reporting strecture in OM between 2 different Org units( Root org units or Sub-org Units) for they existing positions in OM.
Thanks in advance,
Regards,
SuryaHI,
You can try this relationship " ALSO REPORTS TO"
cheers
rafi -
Same position in differenet org unit
HI Folks,
Is it possible that one same position is available in two different org units with 100% occupation. actaully, I have a situation where an EE is moved to diff. org unit but it is not updating org key automatically generated by combining per area and org unit. Though its working fine for the previous record till the time org unit was not changed but not when the org unit was changed.so, the new record is not updating automatically. where cld be the problem.
Thanks,
RashmiHi,
Create new postion in the new org unit to which you want to transfer the employee with 100%.......
then use the transfer personnel action for changing his org unit and the new position....
you can find new records in IT0001 for new org unit and postion and also in OM the old postion would have been vacant and new postion will be occupied -
Dear All,
We are in deciding phase of Personnel Subarea and org unit, I need to understand the difference between Org unit and PSA while designing.
Regards,
Kumarhai
there is not much to do with your org structure
but when creating the personnel areas ans personnel structure we have to take care so that when in later parts the data handling should be easy.
it also depends upon the legal structure of the geographies.
like if u take karnataka and tamilnadu.
may be through out the structure and bussiness process of the company is same.
when considering the taxation of the government it is different ex proffessionsl tax.
if u keep these two personnel sub areas seperately(kar,tam) under PA india
the configueration will be easy.
and also the data retrievel will be easy
regards
nalla -
Reg: Questions on Personnel Management and Organization Unit ,
Hi Friends,
I have 2 questions Could any body help me out on this and Let me know i need to be little elaborate on this ...
1. What are the basic settings we need to do for Personnel Management ?
2. I want to know how to maintain Organization plans for Different Org Units.
Thank you,
Ayyappaadding to archana response
Enterprise Structure consists of Company code
Personal Area
Personal Sub Area
Organisational Structure Organisationla Units
Jobs
Positions
sikindar -
Org Unit to Cost center relationship issue
Hi All,
When I assign a Cost center to an Org Unit, i dont have any issues and got created. But when I assign the same Cost center to a different Org Unit, it delimits the previous Org relationship and creates the new one.
I checked the Relationship A011 time constraint and it is 2 which is with gaps.
This is strange and should not work in this way.
Thanks in advance.
Cheers
VijayThanks a lot guys.. I found the answer...
Cheers
Vijay -
Moving Org sub unit to Diferent Org Unit.
Hi,
Let me know what changes / Problem we face if we move on Dept to another.
Eg. I have comp call ABC & i have 2 Org Unit (Operational & Mkt)
Now i will be moving Quality Dept from Operational to Marketing.(If employees are existing in that unit)
1.) Is is possible if have an employees exist in that unit.
2.) What are all the possible changes i have ot make.
Regards
Rajeshtwo things
either u have to run tranfer action or organisation reassigment action
while doing these u have to change the Position to which Org unit it belongs
as already the Psotition is assigned to the Orgunit already
so PA40 choose ur action so that u can change the Postion and also if thee is any change in PY related isue u can change in PY related infotyeps
>simply PA and OM are integrated and for ur requiremnt not only change of position but also change if u want cahnge in payment also i will happen thru Persoonel action
as personnel action we have infoGroup which contain a group of infotypes and in that infotypes
u will find 0001 which is the main one to check the integration of OM and PA along with PtY related issue -
Moving The Chief Including Direct Reports to Another Org Unit
Dear Expertise,
We have a request to move the manager including his direct reports employees to a different org unit.
I'm looking for a way to achieve this through function module.
Can anyone shred some light or if any Standard FM available to reuse?
Your Sincerely,
SEHi,
certainly I do not believe there is any standard code for doing this.
Are you trying to code up an application that lets you do this? If so, the have a look at the decoupled infotype framework classes (CL_HRBAS_* ) for maintaining OM infotypes - you could use these to delimit the old relationships and create new ones in the target org unit.
In particular have a look at class - CL_HRBAS_PLAIN_INFOTYPE_ACCESS.
if you're just looking for an easy way to do it - lots of dragging and dropping in PPOME would probably be the easiest!
hope that helps,
Chris -
Reassignment to new Org.Unit & Position
Hello Everyone,
I have a requirement to reassign a Business Partner (Associated with Central Person) to a new org.unit & a new position in the organizational Model. This should be done using a FM. I would like to know if there are any FM's which can be used to reassign a BP from one Org.Unit to Different Org.Unit and a differént position.
I am able to create the relationship using FM *OM_CREATE_RELATION_WITH_DIALOG*. But relationship has to be reassigned to different org.unit & position. Let me know if any one you can help me with.
Best Regards,
PrabaharHi,
You can generate the required report from reporting tool HIS. select the org structure for which you want the report to be generated.
In the graphical view select the org unit and in the reporting window select organizational plan and select staff assignment as task function.
Maybe you are looking for
-
Hello Experts, We are facing the below error for one of the report Error Codes: OAMP2OPY:U5V5TIAH DXE expression interpreter error. Invalid "alias" attribute value. Source name: . XML: <sawxd:expr xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
-
SPStab.xml 0kb !?
Hello, At my work we are patching a solman 4 and ran in to a problem: The xml-file "SPStab.xml" we download when we download Support Packs is always empty!? Has this happened to anyone here? I am rather new to this but need your input, can't figure o
-
Random jpg files not displaying on 10.8
I have an iMac running 10.8, a pre upgrade image created using super duper for this same computer and a mac pro running 10.7. I'm getting random pictures that have not changed for years showing "unsupported image format" in Aperture and they also do
-
Hey Guys, Is there a way to post directly to an AUC which is an investment management AUC. I cant post to this AUC through normal settlement as my IO balance is fine and only my AUC is out of balance and i want to do manual corrections. Please advice
-
I am having difficulties in exporting images from Elements 11 to Revel. If I use the recommended procedure (i.e. clicking on File and then Export to Adobe Revel) the captions on the images are not exported. Even if I use that method for an album tha