OM Report on Position

Dear expert,
Is there an report for OM position information? which will display infotypes store in position.
Especially on Acct. Assignment Features, Employee Group, Cost center, Job no. & org unit no.
Regards,
Suz.
Edited by: szn.ng on Aug 5, 2011 8:04 AM

Hi SZN,
You can find many reports as our friend said above.
You can also query as below
Go to TCode - S_AHR_61016493 (General report)
Give your inputs and can pull the report as per your requirement
Revert if you have any questions.
Have a good day...!
KK

Similar Messages

MSS Competence Report by Position not working in portal

Hi,
We have developed a custom R/3 report which is "Competence Report by Position". This report need to be accessed via Reporting iview of the portal.
And in portal we have added new object Selection criteria "Position by Operational Org units ".
Once we select this report in the portal and in next step we select the Object selection criteria "Position by Operational Org units " and click on Report Result we are getting the object selection screen saying Please specify an object type(this is in IAC window)
instead we want the report to be shown directly.
We suspect that due to some issue position value is not going into the program and so it is asking for object type again.
Please suggest are we missing something here?
Backend version :ECC 6.0
Thanks
Raj

Yes, but I am using 10.5.2. I was charged for 2 season passes of a show. When I hit "report a problem" it takes me to the support page. Within the support pages I used "Express Lane" to open a case. I am awaiting their email back. I am just hoping they don't tell me to use the "report a problem" again.

Report for Positions by Trader in Securities

Hi,
I searched for various reports but could not find an option to select Trader in order to generate a report for positions (or journal/transactions/cash flows) in Securities.
I need a report in Securities which should have a selection for Trader and Portfolio fields among others (similar to TPM20). Is there a way in the standard SAP reports?
Thanks in advance,
Durga.

Hi,
For securities, position management is supported at maximum against ID, Security Account/Portfolio/Fund and Gen Val Class (Fund from EhP4 onwards).
Trader field is not a key figure where you can get accumulated position report.
If you wish to maintain trader wise position, the possible way out will be to map Gen Val Class or Portfolio one to one with Trader. Or develop a customized position report considering trader into consideration but condition/corporate action flows will not be under control as clarified by Ravi. Look for a customer exit code to call Trader in that case.
Regards
Prasad AV

Difference Between Inventory Audit Report & Inventory Positing List Report

Dear all,
Please tell me the difference between these twoInventory Audit Report & Inventory Positing List Report, Because I find difference , when observe Closing and Opening Stock Quantity on 1.4.10 audit report showing 610 units but on 1.4.10 posting list showing 973 units of opening stock
Why so happen ? can anybody explain............
Thank you
Komanduri

Hi......
Please read below.....
Inventory Audit:
This report provides an audit trail for the posted inventory transactions in the chart of accounts.
You use this report to make comparisons between the accounting view (inventory balance accounts)
and the logistics view (inventory value displayed by the audit report). The report explains the value changes in inventory accounts.
Inventory Posting List:
The inventory posting list provides an overview of all postings in the system, based on various selection criteria and sort options. You can generate a report for specified warehouses based on one of the following selection criteria:
Item
Business partner
Other: Enables you to specify a selection criterion such as warehouse or sales employee.
Inventory Transfer:
You use this function to transfer inventory from one warehouse to another. An inventory transfer can also be carried out as a consignment for a customer. The items are then stored in the customeru2019s warehouse and are sold from here.
You cannot change the table after it has been added. If you display an existing inventory transfer later on, none of the fields in the table are active.
You can, therefore, only correct an inventory transfer table that has not been entered correctly by entering a compensatory goods movement later.
For more detail please refer help file in SAP.....
Regards,
Rahul

'Submit Query', 'Reset' button on report PForm position can be changed ?

All
A custom 6i Report developed under Oracle 11i environment. This report is in Oracle Applications and this is being launched from web. (Using report launcher/report server
for ex: http://my.server.com:80/dev60cgi/rwcgi60? Rep60_Apps&report=PO_Lines.rdf¶mform=YES)
When report runs on the web using this url, first page displayed is parameter screen and 'Submit Query' and 'Reset' button is displayed on the top the page and after that all the text/fields that are on report parameter form displayed.
ex:
|Submit Query | |Reset|
PO Report
Report Parameters
PO Number :
PO Date :
Question is that can I move 'Submit Query' and 'Reset' buttons to end of page and after the parameters lists?
Appreciate if you can let me know whether is is possible and if so, please send the required code, notes.
settings I have used:-
:DESTYPE := 'CACHE';
:DESFORMAT := 'HTMLCSS';
:MODE := 'BITMAP';
Thanks in advance
Rathan.

looks like this is the default parameter from that is generated by reports and this is fixed and the position of the control can not be controlled.
thanks,
ph.

Report field position

hello
I m using report 10g..
I want to move position of field at run time and also want to set elasticity at run time... can i do that?
srw package doesnot support this. any other alternative?

No, you can't explicitly move the position at runtime. But you can influence the field-position by hiding other fields in the layout next to the one item to move with elasticity variable or shrink

Report on Positions directly linked to Authorization roles

Hello All,
Is there a report in SAP which can tell us which positions are assigned to Authorization roles or which Users are directly assigned to Authorization roles rather than through their Positions?
If not a report is there way we can find it out?
Regards,
Ahmad

No Standard report available to show Positions directly linked to Authorization roles

Reporting on direct reports by position.

I currently run reports on line managers and how many people report to them. I do this by using Ad Hoc Query and choosing HR-OM:PPOME (/SAPQUERY/HE). This gives me a list of staff and their line managers. I then run a quick pivot table to get the amount of staff a line manager has reporting to him. However if there are gapped or vacant post between levels, the line manager above the vacant post picks up the employees below the vacant post as their own direct reports.
I have had a request to create a report that only picks up direct reports, but rather than link the line manager to employees they have working for them, it is a requirement to link the position to the individuals.
Eg. John Smith (Head of Production) sits at the top of the Organisational Management structure. On the current report Bill Johnson (Production Manager) will be show us one of his reports. However there is a vacant post (Deputy Head of Production) in between the 2 employees which John line manages and Bill reports to.
Does anybody know if there is a report that i can run with the position relationships on as well as basic staff data?

I require the following fields to be output:
Personnel Number (If Occupied)
Employee Name (If Occupied)
Payroll Grade
Pay Scale Group
Position Number
Position Name
Cost Centre Number
Cost Centre Name
Name of Organisational Unit (Division)
Line Manager's (LM's) Personnel Number (If Occupied)
LM's Name (If Occupied)
LM's Payroll Grade
LM's Pay Scale Group
LM's Position Number
LM's Position Name
LM's Cost Centre Number
LM's Cost Centre Name
LM's Name of Organisational Unit (Division)
This will include any vacant posts as well as occupied posts. Then i can mess around with pivot tables and lookups in Excel.

Inspecting report field position properties

All,
   Does a way exist to inspect a report fields properties within CR script used in a formula. I know about using code withing the X+2 buttons in the layout tool, but would like to know in a formula what the position and width of any arbitrary report field in the detail band might be.
thanks,
pf

Thanks for responding. I need to do this at run time.
    1) Suppose I had 25 columns and each was associated with a boolean report parameter that allowed the user to toggle columns off and on.
    2) Further suppose the user decided that she does not need columns 7, 12, and 20.
     I want to do the following:
         1) suppress columns 7,12,20 (this is easy)
         2) move the remaining columns 8 and greater the appropriate twips to the left.
     I can do all this now but I must "hard code" the field position into a string with delimiters which I later split into an array to use in determining the x offset (if any) for each unsuppressed column.    Life would be easier if one could just inspect the X position of any field. Please let me know if this helps in understanding the problem.
pf

FGI0-P&L REPORT-CLIENT MADE LOSS(NEGATIVE) BUT REPORT SHOW POSITIVE(GAIN)

I need to make changes to a report with a customized form and report type FAGLFLEXT .
I need the value of the retained profit/loss for the year to show a negative as the client made a loss for the year
The role where the retained profit or loss is stated is showing a positive value(gain) instead of a negative Value(loss) .
Please how can i make the changes required.
Thank You

Check your custom report with the standard report of "S_pl0_86000028" with the financial statement version that you are using for your custom form..
Look for accounts that are appearing in "Mot assigned node" if any. If you find some NOn assigned accounts, then assign them to correct nodes and execute the report.
More over check for wrongly assigned GL accounts in teh FSV P&l Items to Bal. Sheet and Vice Versa,.

How to move from one report (with positive Qty) to another (Negative Qty) ?

Hi all,
There is Quantity column in BEx query and I have a Calculated Key Figure on Quantity to have only POSITIVE values (> 0). Now the requirement is to have another report which are excluded from first (main) query because of NEGATIVE values (< 0). Basically, the first report will have only POSITIVE Quantities and we should drive from there to another report which will have NEGATIVE Quantities.
Could you please tell the steps to accomplish it with RRI, PLEASE ?
Thanks,
Venkat.

Hello;
Why don't you create a calculated KF just for the quantity.
Then, on the first report you make a condition (quantity > 0). for that CKF.
In the second report you do the same but for negative.
See this link for more details:
http://help.sap.com/saphelp_nw04/Helpdata/EN/c1/5f6039ae48e623e10000000a11402f/content.htm
Regards;
Ricardo

Report on Position and the corresponding Job

Dear Friends,
There were some positions which are wrongly assigned to some Jobs. For e.g.: an Account Superintendent position is assigned to a Stenographer Job. So we would like to find out which position is assigned to which job.
Is there any report through which we can obtain the positions and to which Job they are assigned to. We have 900 odd positions. So if we get those positions and their corresponding job then we can check whether they are correctly assigned or not.
It would be great if anyone could help me in this regard.
Thanks
Nelson

Hi Viishwa,
Just as the error message said, “The edition of Reporting Services that you are using requires that you use local SQL Server relational databases for report data sources and the report server database”. Because the remote data source support feature is only
supported in Enterprise, Business Intelligence and Standard editions. Express with Advanced Services can only use Express with Advanced Services (local only) as the Database Engine instance to host the database.
For more information about Features Supported by the Editions of SQL Server 2014, please see:
http://msdn.microsoft.com/en-us/library/cc645993.aspx
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Report Cursor Position

Hi,
I have a report. In the report output, when I have the output for more than one page, I go to the 2nd or 3rd page. From there, when I double click on one value, it goes to a screen. and when I come BACK to the report output, it shows the report from the first page again instead of showing the output in the 3rd page.
My requirement is, when I come BACK from the screen, the cursor should stay in the same page where we double clicked earlier. We use a statement for the same. Could someone tell me how to do this..?
Thanks in advance.
Best Regards,
Paddu.

use sth like this in your dynpro:
      MODULE exit INPUT.
     IF ok_code =    'BACK'.
       SET SCREEN 0.
       LEAVE SCREEN.
     ENDIF.
ENDMODULE.                 " exit INPUT
additional for refreshing alv-list use :
   rs_selfield-refresh = 'X'.
   rs_selfield-row_stable = 'X'.
   rs_selfield-col_stable = 'X'.
A.

How to report a positive genius bar experience

I'm a new user still stumbling along in many ways. For instance, I hope that I
haven't posted in this discussion inappropriately. I called Apple support twice, and spoke to 3 different people who were unable to help me with a unique issue. Today, I went to the Genius Bar at the local Apple retail store and had my problem resolved inside of 15 minutes. The Genius was fast, efficient, obviously very good at his job, and informative. I'd like to be able to email someone of some stature to recognize this individual. Any contact suggestions would be appreciated.
Thanks...

Hi Rico7,
Welcome to Apple Forums
I'm glad you had a good experience! I think the best you can do in this case is write a letter to the manager of that sentre and let him take it from there.
I dont know if Apple has an email adress exclusively for compliments haha but i'm sure if you tell the store manager it will be noted

Standard report with fixed position.

Hello,
I have a page where i want the first report to have a fixed position.
I have 3 regions with reports, the first will only display product name and number, the next report will display sales. The last report is very long so I have to scroll quite a bit. That's why i want the first report with names to have a fixed position so i can see which product i'm looking at.
I have tried to make a copy of the standard report template, and in the before rows i have this code
<table class="t3standard" summary="Report" style="position:fixed;">
this didn't work
Is this a way of making changes to the report template? Is it possible to make theese kind of changes in the report template or du I have to go inside the CSS file to add position:fixed somewhere?
Anders

What browser(s) are you using? Win IE doesn't support fixed positioning :-(
How about setting a fixed height for the last report and making it scrollable using overflow: scroll? This would make the first 2 reports "fixed" by default...

OM Report on Position

Similar Messages

Maybe you are looking for