OMB+ 10.2 SOURCE with arguments

Hi,
I'm trying to run a tcl script from OMB+
this works fine:
OMB+>source c:\\script.tcl
But I can't get it working using arguments
OMB+>source c:\\script.tcl DWH_BA_MAPPING
It gives me a "wrong # args: should be "source ?-url? fileName"
Any pointers?
regards
John

Hi John
The tcl source command does not have parameters;
http://www.tcl.tk/man/tcl8.4/TclCmd/source.htm
You can define a variable and reference from within the source script. Or pass the script and parameters to OMBPlus.
Cheers
David

Similar Messages

Aggregating Data from multple sources with ESB

Hi
I want to aggregate data from multiple data-sources with an esb service and after that call a bpel-process with a request build from this data.
1. read data from datasource A (dbadapter-select-call)
2. read data from data-source B (dbadapter-select-call)
3. put the data together in xsl-transofrmation
4. call bpel
Is this possible? How can I get the data from the first call together with data from the second call for transformation? If I get data from the second call, the data from the first call seems to be lost.
Any ideas?
Gregor

Gregor,
It seems this aggregation of data is not possible in ESB.This can be done in BPEL only that too using assigns but not using transformations.I have tried using transformations by giving the third argument to the ora:processXSLT function.But couldnot achieve the desired result.
For more info on passing a second variable(of another schema) as a parameter to xslt pls refer to the post
http://blogs.oracle.com/rammenon/2007/05/
and the sectiion "Passing BPEL Variable contents into XSLT as Parameters".
Hope this helps you.
Thanks,Venkat.

Creating a job with arguments

Hi,
This might sound really remedial, but can someone explain to me how I go about creating a job with arguments with programs. It errors out when I try to use DEFINE_PROGRAM_ARGUMENTS and when I try to use SET_JOB_ARGUMENTS_VALUE. Maybe it's the order I do it in. Any directions would be much appreciated. Thanks!
Tony

Hi Tony,
Almost any internal error is an Oracle bug and you should report this to support.
This is definitely not supposed to happen and I haven't seen this error before, do you have a test case throwing the error ?
Using program arguments should be fairly straightforward. Here's a simple example with two varchar2 arguments
-- create a stored procedure with two arguments
create or replace procedure myproc (arg1 in varchar2, arg2 in varchar2)
is BEGIN null; END;
-- create a program with two arguments and define both
begin
dbms_scheduler.create_program
program_name=>'myprog',
program_action=>'myproc',
program_type=>'STORED_PROCEDURE',
number_of_arguments=>2, enabled=>FALSE
dbms_scheduler.DEFINE_PROGRAM_ARGUMENT(
program_name=>'myprog',
argument_position=>1,
argument_type=>'VARCHAR2',
DEFAULT_VALUE=>'13');
dbms_scheduler.DEFINE_PROGRAM_ARGUMENT(
program_name=>'myprog',
argument_position=>2,
argument_type=>'VARCHAR2');
dbms_scheduler.enable('myprog');
end;
-- create a job pointing to a program and set both argument values
begin
dbms_scheduler.create_job('myjob',program_name=>'myprog');
dbms_scheduler.set_job_argument_value('myjob',1,'first arg');
dbms_scheduler.set_job_argument_value('myjob',2,'second arg');
dbms_scheduler.enable('myjob');
end;
Hope this helps,
Ravi.
-Ravi

Not able to create a Data source with qty filed in the table

Hi i am having scenario.
i am doing a Genric R/3 extraction for R/3 system. I created a view from two tables. I have added a net quantity field also in then view table. But when i created a data source for that view it is showing a error message which says that it cannot create a data source with a quantity field in the table.
Here is my question. How to create a Data Source for a view table which has Qty filed in it.
Pls help with this.
Senthil

Hi Sensai,
U need to add reference table for the unit .... when added into the view u create .......the reference table name u can find in the table itself from where it is brought into the view.... in the table currency quantity fields........
U can add that table in the currency /quantity fields of the view....u need to add referecne field and table...and activate ........
i think it works
Regards
vamsi

Errors in the high-level relational engine. A connection could not be made to the data source with the DataSourceID of '

When I deploy the cube which is sitting on my PC (local) the following 4 errors come up:
Error 1 The datasource , 'AdventureWorksDW', contains an ImpersonationMode that that is not supported for processing operations.  0 0
Error 2 Errors in the high-level relational engine. A connection could not be made to the data source with the DataSourceID of 'Adventure Works DW', Name of 'AdventureWorksDW'.  0 0
Error 3 Errors in the OLAP storage engine: An error occurred while the dimension, with the ID of 'Customer', Name of 'Customer' was being processed.  0 0
Error 4 Errors in the OLAP storage engine: An error occurred while the 'Customer Alternate Key' attribute of the 'Customer' dimension from the 'Analysis Services Tutorial' database was being processed.  0 0

Sorry hit the wrong button there. That is not entire solution and setting it to default would work when using a single box and not in a distributed application solution. If you are creating the analysis database manually or using the wizard then you can
set the impersonation to your heart content as long as the right permission has been set on the analysis server.
In my case I was using MS Project Server 2010 to create the database in the OLAP configuration section. The situation is that the underlying build script has been configured to use the default setting which is the SQL Service account and this account does
not have permission in Project Server I believe.
Changing the account to match the Project service account allowed for a successful build \ creation of the database. My verdict is that this is a bug in Project Server because it needs to include the option to choose impersonation when creating the Database
this way it will not use the default which led to my error in the first place. I do not think there is a one fix for all in relations to this problem it is an environment by environment issue and should be resolved as such. But the idea around fixing it is
if you are using the SQL Analysis server service account as the account creating the database and cubes then default or service account is fine. If you are using a custom account then set that custom account in the impersonation details after you have granted
it SQL analysis administrator role. You can remove that role after the DB is created and harden it by creating a role with administrative permissions.
Hope this helps.

An error occurred querying a data source - with REST services

Hi,
I have a SharePoint 2013 form library library with an info-path form. I need to get the logged in user's 'Display Name' on my form load automatically.
I used REST service to fetch the current user details. In the preview mode of the form, its showing the right name. But when I publish this form to library I am getting the following error.
REST Service --> http://site url/_api/SP.UserProfiles.PeopleManager/GetMyProperties
Please help me to resolve this issue.
Thanks in advance for your time and reply :)

Hi,
According to your post, my understanding is that an error occurred querying a data source with REST services.
It is defiantly permission issue with GetUserProfileByName service
and could be many reasons of this problem. You first try with UDCX file and make sure that UPS is running.
Here are some similar threads for your reference:
http://social.technet.microsoft.com/Forums/en-US/b8c668ea-7511-4657-a1a8-08fb4a6bd53d/info-path-an-error-occurred-querying-a-data-source?forum=sharepointcustomizationprevious
http://social.technet.microsoft.com/Forums/en-US/46866ac2-da09-4340-a86a-af72cbb2c8d7/info-path-an-error-occurred-querying-a-data-source-?forum=sharepointcustomization
http://blogs.msdn.com/b/russmax/archive/2012/08/17/want-to-call-sharepoint-2010-web-services-within-browser-based-infopath-2010-forms.aspx
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Shared Data Source with prompted credentials - errors out.

Using Data Tools (VS 2010) to build report.
Have built a simple report while trying to diagnose this issue. This report is created in a project that was originally built in BIDS2008 and migrated to Data Tools 2010. This project contains an original shared dataset that does NOT
error out.
Report contains
     1) shared data source with properties set to prompted credentials.
     2) shared dataset using data source above
     3) 2 parameters (month and year)
     4) Report uses shared dataset
     5) 2 text boxes in the report body to display the parameters values.
When I try to preview this report I get the error:
     The execution failed for the shared data set "xxx"
     Cannot create a connection to data source 'Data source for shared dataset'
     Security processing failed with reason "3" ("password missing")
Now, if I changed that same shared dataset to use a static login and password; the report renders fine.
What is going on???

Hi RoseNeedsAVacation,
When you use shared data source with "Prompt for credential" option, please use SQL Server login credential to u view the report in BIDS or SSDT report designer environment.
Note: The shared data source will automatic switch to SQL Server authentication mode if we use "Prompt for credential" option.
After you deploy your report and shared data source to report server, please remember to configure your shared data source to use "Credentials supplied by the user running the report" option. Furthermore, select "Use
as Windows credentials when connecting to the data source" checkbox if the credentials that the user provides are Windows Authentication credentials. Do not select this check box if you are using database authentication (for example, SQL
Server Authentication).
For more information, please refer to the article below:
New Data Source Page (Report Manager):
http://technet.microsoft.com/en-us/library/ms180077(v=sql.100).aspx
Regards,
Elvis Long
TechNet Community Support

Problems selecting paper bin/source with some printers drivers

Hi,
I'm using CR2008 SP2 .NET SDK.
With some printers drivers i'm unable to set the correct paper source in the print options.
For example, if I use Toshiba e-series PLC driver (you can find it here:drivers and select, for example, the e-STUDIO281C printer).
Even if i set the correct paper source on the report designer when i print it through code (without applying any changes to the report) the report is always printed by the default paper source defined at the printer preferences.
The same thing happens when you do it through the designer.
I already tried the following workaround but without any success: at the CR Designer, go to the File Menu, and choose Page Setup. Under Page Options, check the Dissociate Formatting Page Size and Printer Paper Size. This often helps with these issues. Resave the report, and see if that works any better.
Is there any known issues with printer drivers and CR2008?
(This thread was originally posted in [.NET Development forum|Re: Problems selecting paper bin/source with some printers drivers])

Oops, sorry my mistake. I'll leave it here for now.
How CR works is to get the Printer info from the DEVMODE structure, which is where the printer driver settings and configurations are saved for each printer installed.
What I've seen plenty of times before is within the DEVMODE structure there is one area called DMExtra and in that structure it holds various custom options. Quite often the issue is we query that structure to get info but the problem lies in the driver returning an invalid structure size and therefore CR can't use any custom settings.
Same type of issue if they use an uncommon (ENUM) value for the paper size. In code you can see this in debug mode. But if you simply pass the values as pointers and not attempt to alter them at all CR should not alter what the designer used and saved in the RPT file when the reprot was designed.
What can happen when CR loads the printer info it fails due to problems with the printer itself. There are missing files from the install of the printer which cause Crystal to stop getting the info.
Try this on a clean PC with no other printers installed, Install just that printer driver and then install Crystal Reports. If it still fails then we know it could be Crystal having problems with that driver. You may want to post your issue with the printer manufacturer also. They may be able to test also and determine if it is a CR or their driver issue. They can download a trial version of CR for testing.
Trial lin is: Direct link to the Trial version: http://www.sap.com/solutions/sapbusinessobjects/sme/freetrials/index.epx
If that's not an option you could purchase a support case here for one of our Engineers to escalate to R&D. If it turns out to be a CR problem then you'll get a credit for the case, if it is a printer driver problem then no credit.
Single Case Purcahse is: http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300?resid=-Z5tUwoHAiwAAA8@NLgAAAAS&rests=1254701640551
Be sure to tell them it needs to go to the Report Designer team first.
There is also a possibilty their driver has issue with Windows OS and the .NET framework. Crystal reports is also UNICODE compliant so the printer driver would have a better success rate if their driver was also unicode compliant.
Bottom line is if it doesn't work in Crystal Designer it won't work in code either.
Thanks again
Don

Multiple authentication sources with the same category

Quote from portal help:
"Multiple authentication sources can use the same category. However, because the prefix is prepended to the user and group names, you need to be certain that the domains involved do not have different users or groups with the same name. That is, if a LizaR user exists on one domain, and a LizaR user exists on another domain, they must be the same user because only one user will be created."
Fine, let's say I am "certain that the domains involved do not have different users or groups with the same name".
But there is other concern I have here. I want to know how portal will RECOGNIZE which authentication source to use?
Let's say I have 2 auth sources AS1 and AS2 with the same category MyAuth. AS1 use WS1 to authenticate against LDAP1 and AS2 use WS2 to authenticate against LDAP2.
Now, I have a user - Dmitry. I am trying to login into portal and I selected AS1 to do actual authentication. My question is how portal will CHOOSE which auth source to use because all portal knows about me is <MyAuth\Dmitry> that is came from portal login screen? Both auth sources match this pattern so seems like portal may choose any of them.
Does it mean that portal will try to authenticate again AS1 and if this attempt failed then you AS2?
I didn't find any explanation in portal documentation.
Thank you.
Edited by Bryazgin at 12/12/2007 10:42 AM

Yes, it seems you are right. As soon as portal have found CORRECT user there is no issue anymore because user is bind to unique auth source that actually has been used to created this user.
I think my main confusion come from the fact that having <Category> and <UserName> is not enough to UNIQUE identify user in portal as soon as <Category> can be the SAME for different auth sources.
Let's have you have user created by AS1. According API this user created by this AS1 will have 4 different names, like sUniqueName, sAuthenticationName, sLoginName and sDisplayName. But portal is going to search user in portal database BASED on information that is available in login form - <Category> and <User Name>. At this point portal has no idea about sUniqueName and all this things.
Now if there were 2 users in database that have been created by 2 different auth sources with the same <category> and <User Name> then I don't understand how portal will figured out which user to choose from. I guess <Category> value somehow MUST participate in sUniqueName value. <Category> has to be involve in process of finding user in database. In this scenario 2 users will be retrieved from database and what is important these 2 users are different, they have been created by different auth sources. Now question became which user is CORRECT one?
Edited by Bryazgin at 12/12/2007 1:34 PM

Using JDBC Data Sources with ADFBC, NoInitialContextException

Using JDBC Data Sources with ADF Business Components, NoInitialContextException
I follow the instruction in the link below to create an ADF Swing application using datasource. I am using JDeveloper version 10.1.3.
http://www.oracle.com/technology/products/jdev/howtos/10g/usingdatasources/using_datasources.html
The ADF generated code looks like this:
JUMetaObjectManager.setErrorHandler(new JUErrorHandlerDlg());
JUMetaObjectManager mgr = JUMetaObjectManager.getJUMom();
mgr.setJClientDefFactory(null);
BindingContext ctx = new BindingContext();
ctx.put(DataControlFactory.APP_PARAM_ENV_INFO, new JUEnvInfoProvider());
ctx.setLocaleContext(new DefLocaleContext(null));
HashMap map = new HashMap(4);
map.put(DataControlFactory.APP_PARAMS_BINDING_CONTEXT, ctx);
mgr.loadCpx("datasource.view.DataBindings.cpx" , map);
final FormMain frame = new FormMain();
frame.setBindingContext(ctx);
I got this error when executing the last line: frame.setBindingContext(ctx);
(oracle.jbo.common.ampool.ApplicationPoolException) JBO-30003: The application pool (datasource.datamodel.AppModuleDS) failed to checkout an application module due to the following exception:
----- LEVEL 1: DETAIL 0 -----
(oracle.jbo.JboException) JBO-29000: Unexpected exception caught: oracle.jbo.DMLException, msg=JBO-27200: JNDI failure. Unable to lookup Data Source at context jdbc/xe_hrDS
----- LEVEL 2: DETAIL 0 -----
(oracle.jbo.DMLException) JBO-27200: JNDI failure. Unable to lookup Data Source at context jdbc/xe_hrDS
----- LEVEL 3: DETAIL 0 -----
(javax.naming.NoInitialContextException) Need to specify class name in environment or system property, or as an applet parameter, or in an application resource file: java.naming.factory.initial
If I configure the application module connection type as JDBC URL, everything works.
If the connection type is JDBC Datasource, I got the above error.
Can someone show me how to adjust the generated code by ADF to use datasource?

ADF BC has a bug. With Data Source in Application Module, application module does not connect. Use JDBC Connection URL.
Also refer
ADF BC: JDBC URL vs JDBC DataSource

How to invoke a function with arguments in JSTL expressions

Hi ,
I want to know how to send arguments in the JSTL expression.
I have a scenario like this
for (int i=0; i<nicList.size(); i++)
                      NavigationItemControl nic = nicList.get(i);
                      ni = nic.getNavigationItem();
                      //scr
                      if (nic.isAvailable(Mask.SYSTEM))
                      { %>
                        <option value="<%=ni.getInternalHandle()%>" <% if(pi.getNavigationItemHandle().equals(ni.getInternalHandle())) {%>selected<%}%> ><%=nic.getLabel()%></option>
                      <%
                    }   I was changed these code into JSTL ,the new one is
<c:forEach var="nic" items="${nicList}">
                                             <c:set var="ni" value="${nic.navigationItem}"/>
                                             <c:set var="nicAvailableMaskSystem" value="${*nic.available*}"/>
                                             <c:set var="navigationItemHandle" value="true" />
                                                  <c:if test="${nicAvailableMaskSystem}">
                                                       <option <c:if test="${pi.navigationItemHandle==ni.internalHandle}"> selected </c:if> value="${ni.internalHandle}" >
                                                                 ${nic.label}
                                                       </option>
                                                  </c:if>
                                        </c:forEach>in the above code I have problem with nic.isAvailable(Mask.SYSTEM),
Can any one help me on this how can I invoke a function in JSTL with arguments.
-Bhaskar

JSTL can only handle getter/setter methods. You can't pass parameters to the methods.
There are a couple of ways around this
1 - set up "mask" as a seperate attribute of the NavigationItemControl bean.
ie getMask() setMask()
and then have your isAvailable method as
public boolean isAvailable(){
    return internalIsAvailable(getMask());
}Another solution is to define a static function and invoke it as a function.
public static boolean navigationAvailable(NavigationItemControl, Mask);
What does the isAvailable() method do? How complicated is it?
Hope this helps,
evnafets

Problem with 6700 6.1 in counter strike source with msi mobo

hi,
i've just baught a 6700 6.1 set and they work fine in windows, dvds and the msi speaker set up test. but in counter strike sources speaker test and in game only the centre and sub work. i've changed the speaker settings in windows and source with no luck.
my msi mobo (k8n neo2) has 7.1 built in but only offers 2channel 4channel 5.1 or 7.1 options so i am using my speakers in 5.1 when i run the speaker set up test provided with my mobo the right speaker is highlighted and then plays a sound but in the source speeker test only the centre and sub actually make a sound when they are iluminated i have tryed all combinations off the msi set up and source set up and the problem does not change.
i was wondering what i could do or if this problem has been heard of before.
if i have missed any information out that u need 2 know just ask and il let u know
thanks a lot

If I dun remember wrongly, there's a switch at the woofer. Try changing that to direct mode.

Load Balancing Internet Sources with WSA

Hello everyone,
Is is possible to have multiple internet sources with the WSA like Microsoft Forefront TMG you can have multiple internet sources and adjust for example 33% load on the first link and 66% percent on the second link .
We currently have the S160 .
Thanks .

If you mean "use the WSA to load balance traffic between 2 or more internet providers", no... the WSA won't do that.

[svn:osmf:] 15867: asdocs: Update to accomodate generating OSMF for Flex 4. 0 asdocs from OSMF 1.0 source with as few changes as possible.

Revision: 15867
Revision: 15867
Author:   [email protected]
Date:     2010-05-02 19:36:51 -0700 (Sun, 02 May 2010)
Log Message:
asdocs: Update to accomodate generating OSMF for Flex 4.0 asdocs from OSMF 1.0 source with as few changes as possible.
Modified Paths:
    osmf/trunk/framework/OSMF/org/osmf/display/ScaleMode.as

bringrags wrote:
We do indeed recommend replacing the osmf.swc from a Flex 4 project if you're going to use OSMF in Flex 4, but you may (will?) run into issues if you attempt to use Flex's VideoPlayer within that project. Note also that you'll need to replace osmf.swc for each individual project (or edit your flex-config.xml file to point to the updated SWC).
In terms of future plans, we are working closely with the Flex team to ensure that their next release ships with the latest OSMF version. No ETA on that though.
I have followed the recommendations and removed the old version of swc and replaced it with the release version. And so far the video and audio players work fine without errors.
But looking at the flex-config.xml I see that it still points to the old version.

    <runtime-shared-library-path>
<path-element>libs/osmf.swc</path-element>
<rsl-url>http://fpdownload.adobe.com/pub/swz/flex/4.0.0.14159/osmf_flex.4.0.0.13495.swz</rsl-url>
<policy-file-url>http://fpdownload.adobe.com/pub/swz/crossdomain.xml</policy-file-url>
<rsl-url>osmf_flex.4.0.0.13495.swz</rsl-url>
<policy-file-url></policy-file-url>
</runtime-shared-library-path>
Could you elaborate a little bit more on editing this part of flex-config.xml?
Thanks,
FTQuest

Cannot insert more than 1 WSUS update source with different unique ids

Hello LnG
I am aware that are a whole bunch of forum threads on this error however little bit of additional help would be of great help, as I have nearly tracked this 'pain' down.
Our environment: SCCM 2007 R3
1 Central
15 Primaries and a whole bunch of secondaries
Single WSUS server
OK, so we have just taken handover of this new account and still getting a hang of the creek and corners in the environment. We have about 1000 machines sitting in "Failed to download updates" state. Error
= 0x80040694
WUAHandler.log:
Its a WSUS Update Source type ({A2762CA9-9739-4260-9C3A-DC4B36122E16}), adding it
Cannot insert more than 1 WSUS update source with different unique ids
Failed to Add Update Source for WUAgent of type (2) and id ({A2762CA9-9739-4260-9C3A-DC4B36122E16}). Error = 0x80040694.
Its a WSUS Update Source type ({BCB9D60B-2668-459B-BFFD-6DDD11AADC53}), adding it
Existing WUA Managed server was already set (http://WSUSServername:8530), skipping Group Policy registration.
Added Update Source ({BCB9D60B-2668-459B-BFFD-6DDD11AADC53}) of content type: 2
WUAHandler
Async searching of updates using WUAgent started.
Checked the
CI_UpdateSources table and found 2 Update sources unique ids:
{BCB9D60B-2668-459B-BFFD-6DDD11AADC53} Date Created 2011-01-11 03:47:52.000/Date Modified 2011-01-11 03:47:52.000
and
{A2762CA9-9739-4260-9C3A-DC4B36122E16} Date Created 2014-07-09 02:48:46.000 / Date Modified 2014-07-09 02:48:46.000
My questions:
Can I rely on the last modified/created date for inactive update source and delete it off the database? in this case can I delete {BCB9D60B-2668-459B-BFFD-6DDD11AADC53}?
When i browsed to the registry location on the Central Server
HKLM\Software\Wow6432Node\Microsoft\SMS\Components\SMS_WSUS_SYNC_MANAGER i saw the update source as {BCB9D60B-2668-459B-BFFD-6DDD11AADC53}.
Does it imply that a stale record?
Any help/guidance will be much appreciated :)

Well!! My wsyncmgr.log says this:
Set content version of update source {BCB9D60B-2668-459B-BFFD-6DDD11AADC53} for site XX to 18
Set content version of update source {BCB9D60B-2668-459B-BFFD-6DDD11AADC53} for site XX1 to 18
Set content version of update source {BCB9D60B-2668-459B-BFFD-6DDD11AADC53} for site XX2 to 18
Set content version of update source {BCB9D60B-2668-459B-BFFD-6DDD11AADC53} for site XX3 to 18
Set content version of update source {BCB9D60B-2668-459B-BFFD-6DDD11AADC53} for site XX4 to 18
Set content version of update source {BCB9D60B-2668-459B-BFFD-6DDD11AADC53} for site XX5to 1
Set content version of update source {BCB9D60B-2668-459B-BFFD-6DDD11AADC53} for site XX6 to 18
So, this is an active update source! ?? I cannnot uninstall and reinstall SUP currently. Any thoughts?? Any ody?

OMB+ 10.2 SOURCE with arguments

Similar Messages

Maybe you are looking for