OMF export for Pyramix and ProTools not working correctly

I am exporting OMF files of very simple timelines (30 second promos) for an audio guy based in another part of the country to do audio post.
He is using Pyramix 7.1.10 and ProTools 9.1, while I'm outputting from Premiere 6.0.1
The problem is that when he imports the .OMF (which is exported 24bit, trimmed audio, encapsulated files), one leg of the music track is always missing
This happens the same in both ProTools and Pyramix
Has anyone else had this happen? Am I missing something? Is there a workaround?
All help appreciated
Thanks
jON

I am a post audio mixer working in ProTools, and I have the same issue, just a little more complicated.
The editors I work with handle a variety of projects, most of which use sound shot with EFP cameras. The audio recorded on these cameras is "stereo" in the sense that there are indeed 2 tracks as a single interleaved file, however, the content is dual mono, with the 2 tracks either being 2 lav mics, or a lav and the camera mic.
Is there any way in Premiere that this can be put onto 2 mono tracks, that are then exported as mono tracks, rather than being doubled up in the ProTools session? Adaptive tracks don't seem to work in this situation. The editors have tried a variety of things, none of which seem to make a difference.
Also, regarding stereo music ... that too has been exported to me as a mono file, even though it was supposedly put onto a stereo track in Premiere.
Thanks for any insights.

Similar Messages

Signed up twice for adobe pdf export to word and still not working - anyone else have this problem?

signed up twice for adobe pdf export to word and still not working - anyone else have this problem?

In XI.
I can’t just export to word as I have done in the past in one simple click.
Convert to button is greyed out.
Now I have to save the pdf file on c drive when I am in outlook…then goto export pdf file…then find file then export to word.
I bought new computer with windows 8 (which is awful) and then bought pdf export again…
Any thoughts on how I can get back to one simple click again when I open a pdf file from an email in outlook?
Thank you,
Mike

I have an iPhone 4 on contract and its not working correctly , what should I do ?

I have an iPhone 4 on contract , I only have this 5 and a half months and the iPhone is not working correctly and i do not have insurance .. What should I do ??

It sounds like you did not purchase it at the Apple store? That doesn't matter - you can still take it to Apple to troubleshoot it.
You can also try to troubleshoot it with the help of the folks here - if you want to do that, let me know and I'll ask that your post be moved to the iPhone forum where you're more likely to get knowledgeable answers, ok.

How to Create a Parameterized Report - The select "- ALL-" for department and manager not working.

I downloaded the OEHR Sample Objects application and followed the steps in Oracle® Application Express Advanced Tutorials
Release 3.2.
The parameters and report seem to be working correctly except when I enter "all" for department or manager I get no matching hits.
What's the most efficient way to retrieve "all" if the users selects all for dept and mgr - thus we'd want to return all records in the table.
Region snipprt
Enter Search
Search Employee
Dept
- ALL -
Administration
Marketing
Purchasing
Human Resources
Shipping
IT
Public Relations
Sales
Executive
Finance
Accounting
Treasury
Corporate Tax
Control And Credit
Shareholder Services
Benefits
Manufacturing
Construction
Contracting
Operations
IT Support
NOC
IT Helpdesk
Government Sales
Retail Sales
Recruiting
Payroll
Mgr
- ALL -
Steven King
Neena Kochhar
Lex De Haan
Alexander Hunold
Nancy Greenberg
Den Raphaely
Matthew Weiss
Adam Fripp
Payam Kaufling
Shanta Vollman
Kevin Mourgos
John Russell
Karen Partners
Alberto Errazuriz
Gerald Cambrault
Eleni Zlotkey
Michael Hartstein
Shelley Higgins
The following is the sql that was provided as part of the turitoral.
SELECT
   "OEHR_EMPLOYEES"."EMPLOYEE_ID" "EMPLOYEE_ID",
   "OEHR_EMPLOYEES"."FIRST_NAME" "FIRST_NAME",
   "OEHR_EMPLOYEES"."LAST_NAME" "LAST_NAME",
   "OEHR_EMPLOYEES"."EMAIL" "EMAIL",
   "OEHR_EMPLOYEES"."PHONE_NUMBER" "PHONE_NUMBER",
   "OEHR_EMPLOYEES"."HIRE_DATE" "HIRE_DATE",
   "OEHR_EMPLOYEES"."JOB_ID" "JOB_ID",
   "OEHR_EMPLOYEES"."SALARY" "SALARY",
   "OEHR_EMPLOYEES"."COMMISSION_PCT" "COMMISSION_PCT",
   "OEHR_EMPLOYEES"."MANAGER_ID" "MANAGER_ID",
   "OEHR_EMPLOYEES"."DEPARTMENT_ID" "DEPARTMENT_ID"
FROM
   "#OWNER#"."OEHR_EMPLOYEES" "OEHR_EMPLOYEES"
WHERE
     (lower(first_name) like '%' || lower(:P1_NAME) || '%' OR
      lower(last_name) like '%' || lower(:P1_NAME) || '%')
AND department_id = decode(:P1_DEPT,'%null%',department_id,:P1_DEPT)
AND manager_id = decode(:P1_MGR,'%null%',manager_id,:P1_MGR)

Hi,
Use this..
SELECT
   "OEHR_EMPLOYEES"."EMPLOYEE_ID" "EMPLOYEE_ID",
   "OEHR_EMPLOYEES"."FIRST_NAME" "FIRST_NAME",
   "OEHR_EMPLOYEES"."LAST_NAME" "LAST_NAME",
   "OEHR_EMPLOYEES"."EMAIL" "EMAIL",
   "OEHR_EMPLOYEES"."PHONE_NUMBER" "PHONE_NUMBER",
   "OEHR_EMPLOYEES"."HIRE_DATE" "HIRE_DATE",
   "OEHR_EMPLOYEES"."JOB_ID" "JOB_ID",
   "OEHR_EMPLOYEES"."SALARY" "SALARY",
   "OEHR_EMPLOYEES"."COMMISSION_PCT" "COMMISSION_PCT",
   "OEHR_EMPLOYEES"."MANAGER_ID" "MANAGER_ID",
   "OEHR_EMPLOYEES"."DEPARTMENT_ID" "DEPARTMENT_ID"
FROM
   "#OWNER#"."OEHR_EMPLOYEES" "OEHR_EMPLOYEES"
WHERE
    (:P1_NAME IS NULL OR
        (:P1_NAME IS NOT NULL AND
                (lower(first_name) like '%' || lower(:P1_NAME) || '%') OR
                (lower(last_name) like '%' || lower(:P1_NAME) || '%')
    ) AND
    (:P1_DEPT IS NULL OR department_id = :P1_DEPT) AND
    (:P1_MGR IS NULL OR manager_id = :P1_MGR)

Droid Mini notifications for email and text not working

I am having a problem with notification sounds not working for email and text messages with my Droid Mini. I took my original phone to the Verizon shop. They did a factory reset. Sound worked for two days. Went back to Verizon and they reset it again. But they did tell me if it happened again to call Verizon and they would send me a new phone. Well it happened again. Got my new phone just last week. Well yesterday and today the sound notifications for text messages and email is not working on the new phone. Last night I powered the phone off and back on and all was working well until this morning.
This is very upsetting as I really do like this phone. Would like to know what is going on with it. Have checked all the volumes and they are all up.
Is there a fix for this.
Thank you.
Barbara
Edited to start new discussion and private info removed as required by the Verizon Wireless Terms of Service
Message was edited by: Admin Moderator

For Gmail it is: open Gmail > menu > settings > your gmail address > notifications check box is unchecked.
There are some additional notification options for labels too.

Time change for daylight savings and Alarms not working correctly

we have 3 iPhones in our house. 2 were set to auto time change for daylight saving and one wasn't. 1 did the auto time change with out an issue and all alarms worked ok. The other 2 have had issues with not been able to set the alarms ie set alarm for 0630 and it goes off at 0530 even though the time is set correctly. The 1 that was set to autotime worked fine until I switch auto time off, now the alarms on this one wont work either. well they work but just at the wrong time. The 3rd phone will allow alarms to be set, but the alarm will go off an hour earlier and this phone will not allow the alarm to be set for 0630 at all.
Has anyone had this issue and resolved it. It makes getting up for shift work a right pain..

Read here:
http://www.appleinsider.com/articles/10/10/11/applesays_ios_software_update_to_fix_pesky_alarm_clockbug.html

10.1.4 library file missing for help and update not working

Just updated to AR 10.1.4 and everything seems to be working except the help and update functions are not working. I get the message that the library help file is missing. I uninstalled and reinstalled in both FF15 anf IE9 with the same result and I installed from both Adobe and FileHippo with the same result. Anybody have any suggestions?

On the AR 10.1.4 tool bar menu click the "Help" item and the drop down screen shows a number of items to select from. If I click on "Adobe Reader X Help" I get a message saying "the library file is missing and I should reinstall". As for "check for updates" nothing happens. I've uninstalled and reinstalled AR 10.1.4 from two different browsers, IE9 and FF 15 with no difference. I'm using Vista 32 bit OS.

Trying to use a lebara sim for internet and its not working

Ive just come over to spain and i was told that it would be best for me to get a lebara sim card so i could use the internet whilst here. However, its just not working properly, i can get imessages and whatsapp messages however its just not downloading it properly.
Ive rang lebara and ive got their settings in my phone but still no luck, Ive reset my phone a couple of times and still nothing... Lebara has just told me to contact apple!
I was wondering if anyone could help?!

Hi,
Please check if there is Event ID 9017 and 9018 in the application log, make sure the MRM works well.
Please make sure the Microsoft Exchange Mailbox Assistants service is working well.
And you can increase the diagnostic logging level for the MRM, then you can monitor the events in the application log.
Best regards,
Belinda Ma
TechNet Community Support

Fix for imessage and facetime not working in iOS5

I HAVE THE SOLUTION - It's worth shouting about!
will work on itouch as well
Upgraded 3 devices to IOS5. iphone 4, iPad 2 and iTouch (4th Gen). iMessage activates but during sending message it get stuck at 90%, Facetime stopped working on all 3 devices! All connected through a home network No luck with any of the suggestions on the internet as to the cause of the problems.
Took iphone and iTouch to work, connected on the open Wi-Fi there and hey presto both iMessage and Facetime started working! What the ****? Brought the devices home and they continued to work on my home network. Still no luck with the iPad 2 sending to either of the other devices or connecting on Facetime.
It struck me that there appeared to be an issue with the activation process ( even though it said activation successful at home). The most likely cause is the DNS server not passing the data through correctly.
I checked my DNS setting on my router and they were set to Open DNS (208.67.222.220), maybe using Google Public DNS would work? But I didn’t need to mess with the router settings, the DNS on the apple device overrides the router setting. I set the Pad DNS (in Wi-Fi settings) to the Google DNS and straight away a mass of “stuck” test messages came through and I could also send iMessages. Facetime also started working! Yippee! Success! I reset the DNS back to its original value after I finished and it still works ok ( this is optional as Google DNS is good to use as default).
So here’s the fix.... it’s so simple!!
Settings > WiFi > find the active wifi network ( the one with the tick)
Click the blue arrow> find the DNS entry ( 4th item down), note it’s value.
In the DNS field – type in 8.8.8.8
Click the “home button” and then try iMessage and Facetime.
(it’s up to you if .want to set the DNS back to it’s old value)

Your solution works like magic! Thank you very much!

Canon Lide 30 and CS4 -- Not Working Correctly

I've read everything I can find here and still have not found a solution to the following:
I've moved from a G5 to a 2.66 Quad -- PowerPC to Intel. Running 10.5.8 and CS4.
File>Import does not list the Canon Scanner.
Have done everything I've read about:
Uninstalled and re-installed Canon Drivers.
Have Canon Plug-In in CS4>PlugIn>Import/Export
Have Twain from "Goodies" in same folder.
Repaired permissions.
Shut down and started up, again.
The scanner will work using CanoScan and I can set it to open scan in Photoshop.
VueScan works -- I'm using trial version as a test.
Can anyone get this to work through the Import menu?
Thanks.
This is driving me nuts.

the Cannon plugins are probably written for PowerPC. and the default is to not install the TWAIN.plugin its in the goodies folder.
Keep in mind Photoshop has no scanning ability, It uses the plugin to access cannon's stand alone software.
it seems a bit silly to tie up a $1000 application to use a $50 scanner. not many of us use Photoshop to scan with we all use stand alone software I just happen to use VueScan.

T42p vista fn + f3 and fn + f4 functions (turn off screen and sleep) not working correctly

Hi -- I recently installed windows vista on my T42p. It works fine except that the fn+f3 and fn+f4 functions do not work as expected. Before installing the hotkeys driver, the fn+f4 function worked correctly while f3 did not (going to sleep worked, turning the monitor off did not). I then installed the recommended hotkeys driver. Now fn+f4 makes the monitor turn off while f3 does nothing ... fn+f4 is supposed to put the laptop to sleep. On top of this, if i select "sleep" from the start menu, the computer turns the monitor off instead of going to sleep.
Presumably, the sleep button could still be telling the computer to go to sleep, but the actual operation of going to sleep is now broken? Just a guess. Anyways -- anyone know how to resolve this so that fn+f3 turns my monitor off and fn+f4 puts my computer to sleep?

I've too this problem, but more, my sound mute wasn't worked (for deblock, but it can block it few second before...) 5 days in 5-6 instalation of three version of winxp: winxp ru x64 sp2, winxp es/ru sp3 x32.
eventually I've found and ran "TPOSDSVC.exe" in instalation directory and it give an opportunity deblocking the sound volume!!!!!!!!!!!! and I don't need more functions
volume levels and brightness adjustment worked well without OSD (before I ran TPOSDSVC.exe) and with OSD.
and now I don't know worked this bustered sound driver in winxp x64.
ThinkPad T61 7664

PSE 11 - MacOX 10.7.5 Printing Wide Format Printer and Profiles Not Working Correctly

Macosx 10.7.5
When I start up PSE11 and go to print I set up the paper size then select a Printer Profile. When print the image it is a mess and seem to be black and white it is as if I printed on the wrong side of the paper.
I then go and try to print it again.   Now it all works as it should beutiful colours and spot on. all other print following this works.
Then I shut down PSE11.   Start it up again. Guess what first print is a mess again.   all others after are fine.
I uninstalled PSE11, deleted prefs. and reinstalled PSE11.    Same thing..   first print a mess all others ok.
the issue can be replicated consistantly......
no problems with PSE10 or PSE9
any suggestions?????
cheers elo

Thank You for your suggestions.
I have been printing using PSE for over 14 years going back before the term PSE came up. I have done this professionally using profiles from others and those I generate myself..
All the things you mentioned have been done.
The main point missing in your suggestions is   It is only the first print every time I open up PSE11 that does not work...
at completion of print I immediately go back to the file command and say print and then bypass all settings and print again.   this time and every other print aafter are perfect...      I did not change one single setting...
I know about printer and adobe settings etc.     but thanks for going through the list it was a good reminder of how to remember everything sometimes we rush and forget something...
Finally    It works PSE6, PSE9, PSE10, CS5, Lightroom 4.   I think I have the settings right......
Any suggestions for how to get PSE11 to force the settings for the first print would be appreciated..
Only thing I have not done is upgrade to the latest version of the epson driver. Released less than a month ago to provide support for mountain lion.(iam only on lion) Maybe just maybe???   you never know.   Will try this when I finish by next batch of prints.
I will back up as I do weekly...    Still have the old driver from way back in release 10.5.8   will try to fire up to 10.5.8 and see what happens....
cheers elo
Message was edited by: Elo Laugesen

Vim issues...meta keys and colorscheme not working correctly

The first issue isn't really a vim problem, but it's related. When running Vim in a terminal, my meta key bindings don't work. I've tracked it down to a problem with Xfce's Terminal as noted here: http://vimdoc.sourceforge.net/htmldoc/m … p-alt-keys
...but I'm not sure exactly how to fix it. I suppose I could always switch to another terminal, but I'd like to stick with Xfce's version if possible.
The second issue is that my color scheme isn't being set when I first load up gVim. As soon as I open a file, it properly displays, but the "splash" page doesn't show it. I'm using desert (who doesn't) and this is what it looks like when I first load up gVim:
I did stop using a separate <code>.gvimrc</code> in favor of putting everything in my <code>.vimrc</code> file under a conditional, and all the other settings work just fine. Here's what that conditional looks like:
if has( "gui_running" )
set columns=84 " Set the window's width
set lines=43 " Set the window's height
set guioptions-=T " Remove the toolbar from the window
set guifont=Terminus 12 " Use a clean monospaced font
colorscheme desert
else
set background=dark
colorscheme desert
endif
In case you're curious, here's my entire <code>.vimrc</code> file.

phrakture wrote:IIRC this happens for because gvim does not find a ~/.gvimrc and reads /etc/gvimrc after ~/.vimrc (I think).
Try symlinking ~/.vimrc to ~/.gvimrc
That solved the problem for me. Thanks

HT5100 Can i have back my money for purchased Apps wich not working correctly ??? thnx

THIS APPLICATION NOT WORKING PROPERLY, LIKE IS WRITTE ON MANUAL AND I JUST WAIST MY MONEY. CAN I HAVE MY MONEY BACK ??? MANY THNX FOR ANSWER.

First Contact the Developer of the App.
If necessary Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Keyboard and mouse not working correctly after installing Windows 8.1

I was forced to upgrade my computer to Windows 8.1. My keyboard worked fine until the sytem did a reboot. Numbers on keypad stopped typing and letters were being capitalized when the caps lock was off and the numbers across the top will only type the symbol above the numbers.
I looked up this problem and it seems I need to enter UEFI settings and disable Intel XHCI mode. When I get into the UEFI settings I cannot make any selection from the startup menu. Both my keyboard and mouse stop working.
Any suggestions?
This question was solved.
View Solution.

Thank you for posting a response. Fortunately, I didn't have to try your solution because the computer resolved itself.

OMF export for Pyramix and ProTools not working correctly

Similar Messages

Maybe you are looking for