Omf import from cubase sx 3.0 sounds chopped but looks good. help please!

Category: Audio
Brief Summary: omf import from cubase 3.0 sx sounds chopped
my CPU: Power Macintosh G4 1GH DP (Mirrored Drive Doors)
RAM: 512GB
APP: Logic Pro 7
OS: Mac OS X 10.3.9
QT: 6.5.1 Midi Model: PRESONUS FIREBOX
Midi Driver: CORE AUDIO
I IMPORTET A OMF FILE with about 6 audio tracks FROM CUBASE 3.O SX THAT I GOT FROMA PROFESSIONAL
STUDIO.THE FILES HAVE 24 BIT AND 48 HZ SAMPLERATE
I WAS ASKED BY LOGIC IF I WANT TO CONVERT THE AUDIO FILES.
I DID NOT AND INSTEAD CHANGED THE 16 BIT AND 42 HZ AFTER THE IMPORT WAS FINISHED IN THE SONGbecause i wanna use the high quality to record my voice over the tracks.
THE AUDIOTRAKS WERE IN THE AUDIOBARS BUT WHEN I LISTENED IT SOUNDED CHOPPED, OVERLAYING AND SHIFTED.
THE OMF CONVERSION IN CUBASE WAS VERSION 2
OTHERWISE I HAVE NO PROBLEMS WITH LOGIC SOMETIMES DIGITAL CRACKS.DO I HAVE PROBLEMS BECAUSE OF 512 RAM AND MEDIUM BUFFER SIZE THAT LEAVES NOT ENOUGH SPACE FOR OMF FILE? I RUN LOGIC ON THE 10.3.9 SURFACE.
THE COMPUTER OF THE STUDIO I GOT THE FILES FROM IS MUCH MORE POWERFUL RUNS ON THE SAME 10.3.9 THOUGH, COULD THAT HAVE TO DO WITH IT?
THANKS TO ALL THAT CAN HELP, PIA
g4   Mac OS X (10.3.9)   1 Ghz

Wow, you are even more paranoid than me. Those are some good steps to take before upgrade. My upgrade went smooth, so I will list you my steps and you can compare.
1. Turn off iPod completely (hold sleep, slide to power off)
2. Download and install iTunes 8.2, reboot computer
3. Turn on iPod and sync to new iTunes (this was my biggest fear since 8.2 is known for sync problems with touch and iphone)
4. Buy, download and install 3.0 (total time around 40 min.)
5. Eject from iTunes, power on/off (note: your app icons are gonna be all over the place across 4 pages so you have to do some rearranging
6. Sync again
7. Check wifi and reset network settings on iPod if signal is weak, or reset your router (I didn't have to do any of this but I reset my network setting on iPod anyway)
8. Enjoy

Similar Messages

  • When i import from my vidio camera into imovie the clips look tall and thin.tied different imports like full size or large but seem to make no difference everything seems to run ok including sound whats going on?   the m

    when i import from my video camera into imovie the clips look tall and thin. tried different imports like full size or large have imported both sd and hd but seem to make no difference everything seems to run ok including sound. whats going on?  

    Hi Brad,
    when you use Streamclip to convert media, use the same name for the exported file (only with different extension). Then make a shell script calling
    touch -r origFileName.mp2 newFileName.mov
    This will copy the exact time and date from origFileName.mp2 to newFileName.mov
    The script may look like this (save the file, give an exec permission to it and call it in the right directory):
    #!/bin/bash
    for i in `ls *.mp2`; do
    NEWNAME=$(ls "$i" | sed -e 's/mp2/mov/')
    touch -r $i $NEWNAME
    done
    You may need to adapt the extension names used (in the example above .mp2 is input file to get the date/time stamp from and .mov is the output file to stamp.
    Have fun and cheers

  • Can't download anything from appstore anymore. Password is correct, internet works. Help, please!

    Can't download anything from appstore anymore. Password is correct, internet works. Help, please!

    It magicallly works again. But thanks for all efforts.

  • My project has lost the audio track. I imported tracks from iTunes, they are in the project but do not play, please help?

    Hi...my movie project has lost the audio track. I can see it but nothing plays.
    The movie record has its audio but the imported iTunes track is silent.

    This might sound weird, but here's an idea which worked for me re music that was newly added to itunes and showed up in my ipod but wouldn't play - I simply played the tracks in itunes first, just a second of time or so will do it, not the whole track, then connect the ipod and sync again and this time they played - hope this helps.

  • Importing from tape via firewire - event name created, but no content saved

    I'm importing from my camcorder tape via firewire. Some recordings work just fine and I get the event into iMovie '09 v 8.0.5 (820) . Other events on the same tape don't import. When I import those events manually, an event name gets created in the event window, but there is no content in it. Any thoughts??
    One confusing little addition - sometimes when those events are being imported and the scenes are bad quality (e.g., broken up a bit) they DO import. But when I rewind the tape and try to import them again with the picture coming in better, they DON'T work.

    Are all your clips DV? Are some HDV?

  • My newly purchased songs from itunes skip on my imovie.... Help please!

    The music I have on itunes from my ipod play just fine, but when I purchase a new song from itunes and try to add it, the playback skips (video also). I'm trying to make a small video from wedding photos. Everything is finished except the audio. I would use other music except I don't have wedding appropriate songs... Please help if you can. Clearly I don't know what I'm doing.

    Hi Ballfanjt and welcome!
    It's all to do with DRM copy protection. In order for your audio from iTunes to work correctly in iMovie, you need to burn the track/s to a CD, then re-import from that CD into iTunes, save as an AIFF file, then they will import perfectly into iMovie.

  • I have a Macbook OSX Version 10.6.8 and I have problem with Movie application 7.1.4 (585) when I try to open it a statement said "MIssing Quicktime Components, re install from Movie Installer" my operation system is snow leopard. Help please!

    I have problem with the Movie application 7.1.4 (585) when I try to open it a statement indicate that there are some "MIssing Quicktime components, re-intall from movie installer" . How can I fix thi problem. Please help.

    Acrobat Support

  • After updating to yosemite my mail will not import my mailboxes so it won't open mail at all HELP please

    after updating to yosemite my mail will not import my mailboxes so it won't open mail at all HELP please

    I have the same problem. The mail app doesn't work properly. Either cannot connected to the server or fail to connect. But the network is totally find and work well as i can open website.
    Another problem is sync to the software, like Evernote, nustore,  fail to connect to the server, cannot sync anymore.

  • Trying to upload to websites today from Adobe Muse and get error:21 message. Any help please?

    Hi,
    I keep getting this message. Can anyone help please?
    An unknown authentication error has occurred using your AdobeID
    (SHARED_UNKNOWN_ERROR:21)
    THANKS
    Celia

    Hi, as no response from anyone and the issues still causing problems this morning, I uninstalled Muse and Re-installed. Seems to work ok now. Hope that helps anyone else with same issue.

  • I want to restore my iPhone.if I create a back up before restoring so will restoring from back up bring back my contacts after restoring.urgent help please

    I want to restore my iPhone.if I create a back up before restoring so will restoring from back up bring back my contacts after restoring.urgent help please

    Happy for you!

  • Movies imported from iPhoto do not have sound

    When I connect my camera (Sony Cyber-Shot DSC-W55) to iPhoto, it downloads both the pictures and video that the memory card has recorded on it from the camera.
    Now, when I drag a movie from iPhoto to iMovie, the video clip doesn't have any sound. Thus far, I've tried importing in DV format and MPEG4 format. The video will play, with sound, in QuickTime Player from iPhoto, but in iMovie, it doesn't.
    Also, when I click on the Help->iMovie HD Help, it starts to open help, but then closes itself. Bug, or do I need to re-download iMovie, or... purchase a higher level of iMovie? If I can't even get the Help function to work, what good is this piece of software?
    BTW, I'm on a Mac Pro 2x2.66 GHz processor, 1GB RAM installed running Mac OS 10.5.2.

    Now, when I drag a movie from iPhoto to iMovie, the video clip doesn't have any sound.
    Your Sony stores its video content as multiplexed MPEG VX (MPEG-1) files which are "playback" only compatible with QT and QT applications. To retain the audio content you must use an MPEG-based, third-party application like MPEG Streamclip (free) to convert these files before importing to iMovie for editing.

  • I have home sharing enabled but still can't get my library to show up on my newly authorized computer, I have a lot of songs imported from CD's, never had to use itunes match or before, please help if you can

    I cannot get my library to show up on my newly authorized computer, please help if you can.
    I have home sharing enable on old computer and new one. 
    If I try to sync --I  get the message that ipod can be synced w only one computer and if I sync with this library (which only shows new purchases from itunes)   it will replace everything that is currently on ipod

    Why can't the songs be transferred to the device?  Is it because they are not authorized?  Were these 25 tracks purchased/downloaded with the same account you have used to authorize the PC/new iTunes library?
    Have you seen this article yet?
    iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
    B-rock

  • Don't want to reinstall 10.8 from app store i have the disc but how? HELP!

    Turned my Imac on the other day and it keept getting stuck at the start, so i started disc utility by long pressing alt. Verified disc, which faild and verified permission which also failed. It said i had to back up and format my drive. Since i already had a Recovery disc i went ahead and formatted the disc. After reset i went into the disc and menu came up for Restoring, Renistalling os, disc utility etc. If i click on reinstall osx it asks me to sign in the app stores and when i sign in it says "you need the account from which OSx was downloaded." Since i never downloaded it and i have the disc 10.6.2 on hand how can i reinstall from that disc?
    I don't know how to restore from the (locked) backup drive so i figured i will just reset the whole thing. Data in that mac in not important so i just want to reinstall the thing from my disc which came with my other imac.
    Thanks for the help!

    Is the 10.6.2 disc you have the original Install Disc from another Mac.

  • Exported my library to an external drive (new with nothing else on it) Trying to import to iTunes on another computer (Dell) with out success.  Help Please

    Need help importing my library from and external drive

    After admittedly only a quick read the one thing you don't say is how you are trying to make this move.  Most people with moving library issues do it the wrong way.  Plenty of web sites tell you how to do it the wrong way.
    If the iTunes application is started before the drive with the library is fully mounted and awake iTunes will revert back to the internal drive.

  • One Channel Sound only... Help Please

    I have a 2nd gen nano and i am only getting sound in the left channel of the the headphones. I have checked that my headphones work correctly, and have cleaned the contacts with a stiff brush and 70% isopropyl alcohol. i can get sound from both channels if i hold my heaphone in the position in pictures 2 and 3. Picture 1 shows normal headphone insertion, where i only get left channel.
    Picture 1:
    http://img2.freeimagehosting.net/uploads/31a85ae4db.jpg
    Picture 2(a little blurry, 3 is closeup):
    http://img2.freeimagehosting.net/uploads/49c58a7a9b.jpg
    Picture 3:
    http://img2.freeimagehosting.net/uploads/1403562d82.jpg

    You need to replace the headphone jack. If you are still in warranty send it to Apple or make a Genius Bar reservation and take it to an Apple Store. If you are out of warranty you can send it to a 3rd party repair site, such as http://www.iresq.com or if you are the DIY type you can buy a headphone jack and replace it yourself. Try http://www.ifixit.com for videos on how to disassemble/reassemble your iPod. Or Google for other 3rd party sites.

Maybe you are looking for