OMF not visible on Windows

Hello,
i've created an OMF from FCP 5 on my G4 and burned it on to DVD. When my sound mixer tried to load the DVD on his PC, the DVD just came up as blank. Does anyone know why? The file is DEFINITELY on there!
Also, should the file icon be blank? It looks a bit wrong on my desktop - the icon is plain white with FCP symbols at all, could this be a problem??
Thanks,
Steve

What version of OSX are you using? Prior to 10.2.8, discs burned from the Finder were formatted as MacOS Extended, which Windows cannot read. After 10.2.8, they are hybrid multi-format discs, inlcuding ISO 9660. So there's one thing. If you want to burn an ISO 9660 from 10.2.8 or earlier, you would need to use software like Disk Utility (I think it handled it back then), or Toast.
EDIT: I see you are on 10.4.8, so that's not the issue. When you say the file is DEFINITELY on there, how do you know? Cna you read that disc in computers other than your own, be they Mac or PC?

Similar Messages

My iPod Touch 4g not visible in Windows or iTunes

My iPod Touch 4th generation is not visible in Windows or iTunes. It also doesn't seem to want to charge. I've tried the Troubleshooting Assistant but nothing happened. Any ideas? It was working fine last night, and this morning started acting wonky.

http://support.apple.com/kb/TS1538

Video download from SD card 2 iPad 2 interrupted, file corrupted. Cannot find file to delete. Does not appear in Photos, or is not visible using Windows File Manager. Consumed 2.5G of space! Can anyone help

Video download from SD card to iPad 2 interrupted, corrupted. Cannot find file to delete. Does not appear in Photos, or is not visible using Windows File Manager. Consumed 2.5G of space! Can anyone help?

Video download from SD card to iPad 2 interrupted, corrupted. Cannot find file to delete. Does not appear in Photos, or is not visible using Windows File Manager. Consumed 2.5G of space! Can anyone help?

Phone not visible in Windows Explorer - post 10.3 upgrade

I installed 10.3 on my Q10 no problem, saw the Blend icon and decided to install (having used it on the work Passports) so a couple of things....
1. Blend now downloaded - but wants to install on an F:drive - which would be the Q10.
2. When connected via USB (or wifi) the Q10 is not visible in Windows Explorer (it was fine in 10.2)
3. Can see the drivers begin to install, but then it rolls back and a 'Install failed, cannot find F:drive' appears.
4. Is Blend intended for use on the Q10.
Anyone got any ideas I can try?
Solved!
Go to Solution.

Found it, you have to go into Settings > Networks and Connections > Connection Services > USB and slide the USB Mass Storage Mode to the on position. It will then show as an ext. hdd in Windows Explorer.

Mavericks disk not visible from Windows 7 Bootcamp

Mavericks disk is not visible under Windows 7 Bootcamp. Every other drive in the machine and everything else on the network shows up. Any ideas?

CoreStorage logical volume groups (1 found)
|
+-- Logical Volume Group 760EBA5D-A4B0-49CD-B1BA-087764922062
    =========================================================
    Name:         Untitled
    Status:       Online
    Size:         2999733223424 B (3.0 TB)
    Free Space:   0 B (0 B)
    |
    +-< Physical Volume 5A04D434-DEAC-4D83-ACDB-0EE9BFE6E686
    |   ----------------------------------------------------
    |   Index:    0
    |   Disk:     disk2s2
    |   Status:   Online
    |   Size:     2999733223424 B (3.0 TB)
    |
    +-> Logical Volume Family 762D431D-888C-489A-854C-F2151D121F99
        Encryption Status:       Unlocked
        Encryption Type:         None
        Conversion Status:       NoConversion
        Conversion Direction:    -none-
        Has Encrypted Extents:   No
        Fully Secure:            No
        Passphrase Required:     No
        |
        +-> Logical Volume 96DD2E04-244F-4559-9C89-2DAE309B4994
            Disk:                  disk4
            Status:                Online
            Size (Total):          2999414448128 B (3.0 TB)
            Conversion Progress:   -none-
            Revertible:            No
            LV Name:               Thurgood
            Volume Name:           Thurgood
            Content Hint:          Apple_HFS

Some Media Card folders within 'documents' folder not visible in Windows XP Pro SP3

I have tried renaming these folders on the device (eliminating '.'s and generally shortening the folder names) and then connecting to a Windows machine again afterwards, however, I have two problematic folders (within the 'documents' folder) that are still not visible in Windows.
One thing that is kind of troubling is that I thought I noticed that when I was moving files out of the 'documents' root directory (only place I can put files from the Windows machine [while connected] because I can't see the target folders in Windows) on the device to one of the problematic folders (again, because I cannot accomplish this in Windows), the original full-length folder name was still being referenced in the path displayed in the intermediate confirmation dialog.
Does it matter whether the folders are created within the (connected to) Windows environment or done on the device? Are there folder name length considerations or illegal characters?
I have created (in the Windows environment, while connected) some rather long folder names (including ''' & '.' characters) within the 'pictures' directory and have no trouble seeing them later in Windows.
What could be going on here?
Thanks, FFF

... bump ...

NAS not visible in Windows Explorer!

I seem to be the most stupid person here but why is my newly installed NAS (Buffalo LS220D) not visible from the Windows Explorer?

Hi,
First, please make sure that you have setup the NAS corretly, you can refer to the user manual I found on the
Buffalo offical website
http://www.buffalotech.com/products/network-storage/home-and-small-office/linkstation-220
Meanwhile, please mak sure to turn on network discovery under Control Panel\All Control Panel Items\Network and Sharing Center\Advanced sharing settings
Make sure that"client for microsoft network" is installed under the network connection\properties
If issue persists, please temporarily turn off firewall and anti-virus porgram since incorrect setting can block the connection.
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Yolanda Zhu
TechNet Community Support

HFS+ formated USB Disk not visible under Windows 7

Hello.
I recently purchased an APE and hooked a 4TB HFS+ drive via USB on it. Unfortunately it's not visible under Windows7. Though if I use a Fat32 formatted drive i'm able to access it. I even have macdrive installed. The drive is working properly if connected to the PC or MAC manually.
Please help

Hello exalderan. Welcome to the Apple Discussions!
FWIW. I currently have an external USB drive (NewerTech miniStack) connected to my 802.11n AirPort Extreme Base Station (AEBSn). I can access it from Windows 7 (Ultimate) from either a dedicated Windows PC or from a Parallels VM running Windows 7 without any issues. The 2 TB drive is formatted in HFS+.
What type of errors are you getting?

Mac Photoshop layers not visible to Windows user

I'm using Photoshop CS6 Extended on a Mac. My client requested a PSD file saved with layers, which I provided. Her web developer is on Windows CS6 and is unable to see the layers in the file. Do you know why the layers are not visible to the Windows user?

Look under your PS Preferences > File Handling
How are you sending the file? Some email programs can alter files.
If you are saving a separate copy for your Windows users, see that layers is checked in the dialog.
Here's a screenshot for suggested File handling settings.

HP Compaq 6910p Cardreader not visible in Windows 7.

My problem is dat my cardreader not visible is in Windows7. I have new drivers installet i hear a sound but that's all.

hp laser printer p1077 is not working in windows7 ,32 bit OS... all the installation process were successful but when the page is asked to print its not printing... even the test page is not printing so please help me fix this problem please...thank you.. I think This printer no support to Windows 7 ???? Please confirm this or advise how we can solve this problem Becoz i don't know why this problem is coming all thing are fine. Deepak Joshi

Macintosh HD partition is not visible in Windows

Hello
I've a MacBook Pro mid 2012.
A week ago I had a problem with OSX 10.9 and the Apple Premium Reseller fixed it with a clean instal of OSX. I've set everything back with my Time-machine backup. Because it was a software problem, my windows partition wasn't damaged. In Finder I can see the BootCamp-partition and of course my Macintosh HD-partition. But when boot with windows I can only see the Windows BootCamp-partition but not he Macintosh HD-partition. And that's my problem. I want to see the Macintosh HD-partition in windows. Before the clean install I could see the Macintosh HD-partition and now I want it back because I need it.
I've downloaded the newest BootCamp software (Boot Camp Support Software 5.1.5621) and installed it. Because the HFS+ driver is included in the BootCamp software you should think it solved the problem but it doesn't. I've read many communities and they told about only to reinstal the HFS+ driver which was exluded from the BootCamp software but this also didn't work.
I also tried to give the Macintosh HD-partition a 'disc-letter' because maybe that should be the reason why I can't see the partition but I can't give the partition a letter. I did it this way: Run => type: diskmgmt.msc. But it's impossible to give it a letter. (See additional photo at the bottom) I only can delete the partition when I right-click on it. (Is it normal that my disc have so much partitions which I don't know?)
Can someone solve my problem please?
Thank you very much for helping me out!
Joachim

The number of partitions should be four (the ESP/EFI information, OSX, Recovery HD and Bootcamp) on a single disk Mac machine.
From a working system with bootcamp, the partition id for entry 2 is AF (not AC) as is shown in your MBR, and the Windows installation only understands MBR (if you do not install using Windows 8.x/EFI on late 2013 Macs).
sudo fdisk /dev/disk0
Password:
Disk: /dev/disk0 geometry: 121643/255/63 [1954210120 sectors]
Signature: 0xAA55
         Starting       Ending
#: id cyl hd sec - cyl hd sec [     start -       size]
1: EE 1023 254 63 - 1023 254 63 [         1 -     409639] <Unknown ID>
2: AF 1023 254 63 - 1023 254 63 [    409640 - 1452530904] HFS+
3: AB 1023 254 63 - 1023 254 63 [1452940544 -    1269536] Darwin Boot
*4: 07 1023 254 63 - 1023 254 63 [1454211072 - 499998720] HPFS/QNX/AUX
There is a simple fix for this. You may have to re-install Bootcamp drivers again, to allow the HFS driver to pickup the MBR entry or a reboot may be needed. Please use the following commands and stop if you see any errors. (the i386 boot error message at the start can be ignored safely). This is done by using the fdisk utility in interactive mode with the '-e' command line option.
sudo fdisk -e /dev/disk0
p
setpid 2
AF
p
w
y
Here is the help page for the fdisk utility.
sudo fdisk -e /dev/disk0
Password:
fdisk: could not open MBR file /usr/standalone/i386/boot0: No such file or directory
Enter 'help' for information
fdisk: 1> ?
help Command help list
manual Show entire man page for fdisk
reinit Re-initialize loaded MBR (to defaults)
auto Auto-partition the disk with a partition style
setpid Set the identifier of a given table entry
disk Edit current drive stats
edit Edit given table entry
erase Erase current MBR
flag Flag given table entry as bootable
update Update machine code in loaded MBR
select Select extended partition table entry MBR
print Print loaded MBR partition table
write Write loaded MBR to disk
exit Exit edit of current MBR, without saving changes
quit Quit edit of current MBR, saving current changes
abort Abort program without saving current changes
fdisk: 1>

BI Publisher Tab not visible in Windows 2007 with Windows 7 64 bit Config

Hi All,
I was working with BI Publisher till last week in my system having windows 7 64 bit edition with Windows Word 2007 installed. When i started my work on Tuesday this week, i was not able to see the BI publisher Tab in the Word. But it's visible in Excel. I tried looking in to the forum and got solutions such as Enabling Macros, Enabling the Trust Access to VBA Project Model and Re installing Word and BI Publisher.I tried everything but still the issue is not resolved.
I dont find any *.exd file present in my system to prevent the Add-Ins from displaying. I'm not sure what update had made the BI Publisher to be hidden. Please let me know if you any suggestion or workaround as my project is in critical state with strict deadlines.
Thanks,
Bala Maheshwaran

If you cannot show the BI Publisher Macros in Word :
1.     You have to uninstall the BI Publisher desktop
2.     Install the BI Publisher as (Right-click on the "Command Prompt" item and select "Run as administrator".)
3.     If you cannot show the BI Publisher macros and in word options show TBmenu as disable you have to do :
4.     Click the Microsoft Office Button , click Word Options, and then click Add-Ins.
5.     In the Add-ins box, identify the add-in that you want to enable and note the Add-in type located in the Type column.
6.     Select the Add-in type in the Manage box and then click Go
7.     Select the check box for the Add-in that you want enable and then click OK.
8.     Close the word
9.     Reopen the word , than appear the BI Publisher
Azita

Problem: BB 8700g - connected via USB to my PC but not visible on Windows Explorer

when I connect my 8700 g (OS 4.5 / DTM 5.01) to my PC via USB and open the Windows explorer I exspected to see there the device , I don't!!!
I would like to "drag and drop" *.mpg-or *. jpg-files from my PC to the BB device (such as ring tones or photos)
Other smart phones are recognized , I can see them as drive E or F etc, and if I click on e.g. E, I see the contents of E and am thus in a position to transfer the files to the place I want.
So what have I got to do in order to make my device visible and ready for the work I described?
I hope I made myself understood and would appreciate you helping me solve this problem, thank you

Hi!
Here is the list of troubleshooting atricles...hopefully something will be useful:
http://supportforums.blackberry.com/t5/BlackBerry-Desktop-Software/Tips-for-getting-BlackBerry-Deskt...
KB02640 Troubleshooting USB connections
KB15486 Top 10 BlackBerry smartphone and BlackBerry Desktop Manager troubleshooting tips
KB11439 BlackBerry Desktop Software does not detect the BlackBerry smartphone when it is connected
KB00019 No PIN displayed in BlackBerry Desktop Redirector
KB10938 "USB charging current is insufficient" appears on the BlackBerry smartphone
KB01451 How to turn on advanced synchronization logging if a wired synchronization fails
KB19717 The BlackBerry smartphone is not detected as a USB Mass Storage Device when connected to a computer
Also, check that you are using only root USB ports...no hubs (sometimes the front-side ports are hubs...use a rear USB port). And make sure to try disabling USB power management in your system configuration (Device Manager).
Apologies in advance if this is redundant -- there's no way to be sure if you've already seen and tried these.
Hopefully something there is helpful!
Cheers!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

AEBSn + USB disk, not visible in Windows

Have been using AEBSn as access point for last 6 months. Now added a LaCie MacMini drive via the USB port on AEBSn but am unable to access it via the LAN. I know this is a common problem and have checked the settings described in some of the responses to no avail.
The disk is formatted as HFS and can be accessed using MacDrive when directly attached to PC. The disk name is currently "Lemon" (so no funny characters).
AEBSn has latest firmware (7.2.1), the disk is visible under "disks" on the Airport Utility, file sharing is enabled with base station password, guest access is read & write and disks are advertised globally using Bonjour.
I have tried to access from three different PCs. The latest Bonjour (1.0.4) is loaded and is enabled in firewall (AVG in 2 and Windows in other). From Windows Explorer I can see the AEBS (properties shows it as a CIFS server) but it has no folders. The Airport Disk Agent is running in the system tray but does not detect any disks.
Please help, my central back strategy is in ruins!

Hi, I just got my usb disk working!
I got Airport Extreme (the latest one), all the firmware updates (7.2.1) one pc with WINXP. A 500Gb USB disk from Packard Bell. I want to connect the drive to the Airport and serve files over the wireless.
my trouble was that while I could see the disk in airport utility, I could not actually connect: wrong password, user etc.
As the disk is visible in Airport Utility and the Extreme station is visible in the disk management utility in the status bar, I concluded that there must be a problem outside of the Airport Extreme. Indeed, this I found to be in my network settings, which I easily fixed by installing Microsoft Client for Networks. Practically I did this by Start>Network settings right click Properties. then selected the wireless network right click properties once more. Under the General tab I checked for the presence of Microsoft Client for Networks, it wasn't there so on the same screen I click Install.. select Clients and fianlly Microsoft Client for Networks. Bingo.
I hope this helps, I spent a whole day looking around in this forum and no one has suggested this. So I do and wish you good luck! (now to see if I can get the music onto my Airport Express!!!)

Mac Volume/Parition not visible in Windows XP

I'm getting a weird issue and apparently no one else have got this before (have been gone through all the forum).
The issue is that I don't see the Mac OS-X HFS+ volume/partition in Windows XP Professional (using the Bootcamp). I first installed the Bootcamp 3.0 drivers for Windows, and after not seeing the HFS+ partition, even upgraded to Bootcamp 3.1, but still can't see that drive. My understanding is that it should be visible in the Explorer with other drives, right?
BTW, I tried using the HSF Explorer utility and I can see the Mac Partition using that, but I don't like it much as have to extract the files to actually use them. But it confirms the partition is there and is accessible too.
I can even see the HFS driver files in my windows folder "WINDOWS\system32\drivers" (AppleHFS.sys, AppleMNT.sys, etc).
Any body can help me how to use these drivers to manually mount that drive or how to automate that?
Thanks in advance.
Regards, Akbar


- <BuildInfo BuildNumber="5640" ProductName="Boot Camp">
- <MsiInfo>
<ProductManufacturer>Apple Inc.</ProductManufacturer>
<ProductVersion>5.1.5640</ProductVersion>
<ProductCode>{FA2B2C2A-EA41-495A-9308-60726125D562}</ProductCode>
- <Component Name="AppleOSSMgr.exe" GUID="*" SharedDLL="yes">
- <File Name="AppleOSSMgr.exe">
<KeyPath>yes</KeyPath>
<FileVersion>4.2.0.0</FileVersion>
</File>
And I have checked HFS+ drivers too, its there in Driver folder.

OMF not visible on Windows

Similar Messages

Maybe you are looking for