OMG - Have I got the wrong Mac ?! PT11 will not open.

Question

I have just updated ProTools after the 'death' of my poor old (2007) MacBook pro.
As far as I can make out, I have got everything sorted - setup iLok2, licence transferred from old iLok, activated, downloaded PT11.1.3, installed drivers, Air Creative, installed PT11.1.3 with numerous restarts.
When I try to run PT11, I get a message to say that it has failed to open and I can display a big report to sendd to Apple.
Below is the info in the Mac, the o/s and the start of the report. Can somebody please point me to the issue and a solution (suicide is looming as one !!).
A: My computer :
Model Name: iMac
Model Identifier: iMac14,2 
Processor Name: Intel Core i5
Processor Speed: 3.4 GHz
Number of Processors: 1
Total Number of Cores: 4
L2 Cache (per Core): 256Kb
L3 Cache: 6 MB
Memory: 8 GB
Boot ROM Version: IM142.0118.B01 
SMC Version (system): 2.15f2
Serial Number (system): C02MF3XGF8J5
Hardware UUID: A5944A19-AC3D-5107-99E7-BF8651478AF2
Macintosh HD:
Available: 952.1 GB (952,096,284,672 bytes)
Capacity: 999.35 GB (999,345,127,424 bytes)
Mount Point: /
File System: Journaled HFS+
Writable: Yes
Ignore Ownership: No
BSD Name: disk0s2
Volume UUID: C55D4ED4-37EB-31D5-95C7-C04584FCC521 Physical Drive:
Media Name: APPLE HDD ST1000DM003 Media
Medium Type: Rotational
Protocol: SATA
Internal: Yes
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. Status: Verified
OS Version : Mac OS X 10.9.3 (13d65)
B: The connected device for audio :
003Rack:
Manufacturer: Digidesign
Model: 0xAB0000
GUID: 0xA07E0000AB0000
Maximum Speed: Up to 400 Mb/sec Connection Speed: Up to 400 Mb/sec Sub-units:
003Rack Unit:
Unit Software Version: 0x1 Unit Spec ID: 0xAB
C: Error when I attempt to start PT11:
Process:Pro Tools [351]
Path: /Applications/Pro Tools.app/Contents/MacOS/Pro Tools
Identifier: com.avid.ProTools
Version: 11.1.3.325 (11.1.3d325)
Code Type: X86-64 (Native)
Parent Process: launchd [191]
Responsible: Pro Tools [351]
I am holding my breath in hope . . .

Answer 1

No suicide, no more agitation - I found the issue.
Very sorry to bleat, but it was right there in front of me. My dead MacBook was dead because of the screen - the HDD was ok and I had it extracted and put into an external case.
In the process of setting up iLoks and 'finding stuff', it was still connected to the new iMac. ProTools could see it too and was obviously "confused" about which PT version to run.
Now there is only one Mac HDD it is able to get itself started. I am able to playback my previous recordings so now to start some new ones.
Moral of the story - KISS !! (I WAS being stupid !)
All good - so far . . .