OMG Someone help me with this

Ok, ive been trying to install Itunes on my Vista laptop for AGES now, and it never finishes installing. It looks like it's about to finish until this box comes up:
"the installer was interrupted before the requested operations for itunes could be completed".
Im trying to install the latest Itunes so could someone please help me!!!!!!
Thanks.

Hi Melissaxbebe13,
Welcome to the community & Thanks for your Post...!!
Sorry to hear, you are having trouble with the BlackBerry handheld......request you to perform a clean OS relaod and then observe....procedure can be found from below URL......
http://btsc.webapps.blackberry.com/btsc/viewdocument.do?externalId=KB19915&sliceId=2&cmd=displayKC&d...

Similar Messages

  • I have iOS 7. When I go to the itunes store on my ipod touch it gives me a blank screen with nothing on it. I restarted my ipod touch and it didn't work. Can someone help me with this?

    I have iOS 7. When I go to the itunes store on my ipod touch it gives me a blank screen with nothing on it. I restarted my ipod touch and it didn't work. Can someone help me with this?

    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Go to Settings>iTunes and App stores and sign out and sign back in
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.      

  • The calender on my iPhone 4 with iOS 6 no longer syncs with iCal 4.0.4 on my mac OS 10.6.8. However it is syncing with my iCloud account. Can someone help me with this?

    The calender on my iPhone 4 with iOS 6 no longer syncs with iCal 4.0.4 on my mac OS 10.6.8. However it is syncing with my iCloud account. Can someone help me with this?

    FYI: It seems it was a network problem with my WinXP PC. After complete deletion and new installation of XP and iTunes my iPhone will be recognized correctly, Wifi synchronization works (mostly) fine.

  • I have a problem with my blackberry 9360, I bought it last 2months, and now when I use video camera or camera I saw a red and blue line. Can someone help me with this issue?

    I have a problem with my blackberry 9360, I bought it last 2months, and now when I use video camera or camera I saw a red and blue line. Can someone help me with this issue?

    Hello zukafu, 
    Welcome to the forums. 
    In this case we can try to reload the software on the BlackBerry® smartphone to make sure it is running the latest version and there are no issues with the OS.
    Here is how to backup your BlackBerry smartphone http://bbry.lv/oPVWXc
    Once you have backed up your BlackBerry smartphone please follow the link below to complete a clean reload of the BlackBerry smartphone software.
    Link: http://www.blackberry.com/btsc/KB03621
    Once completed test it and proceed with a selective restore, here is how to restore http://bbry.lv/qgQxLo
    Thank you
    -SR
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • HT5655 I followed all the instructions to update Flash Player, but the installation fails at around 90%, it says that there is an Application running (Safari) bit I actually close all Apps. already. can someone help me with this issue ?? Thanks

    I have followed the instructions to update Flash Player, the Installation Fails at about 90%, it says that there is an Application running (Safari) and it says to close all the apps. and start again ... but I already close all the Applications ... none is running ... can someone help me with this issue ??? Thanks ...

    Dear Dominic
    Brilliant reply. Simple English. Simple to follow instructions. And it worked immediately, first time.
    Why couldn't the Apple and Adobe corporations get their programming right first time? We spend billions of UK pounds and US dollars with them. They reply with incompetent programming such as this, and arrogance to their customers in issuing faulty systems without doing the most rudimentary checks.
    Anyway, I certainly shan't be buying another Apple as this is the most unreliable, most incomprehensible, most illogical and downright thoughtless shoddy piece of computer kit which I have ever owned. And all of it is rubbish ~ emails disappear, photos can't be organised properly, spreadsheets don't work, Pages is laborious… the list goes on and on...
    But thanks to you Dominic, I have been able to load Adoble Flashj… maybe eyou should get  a job at Apple, and set them all on the right course to how to work simply and correctly with customers.
    Thanks again,
    David

  • After the OS 6 update my speaker does not work. My music plays but no sound comes out. Can someone help me with this issue? I currently have the 4S.

    After the OS 6 update my speaker does not work. Volume control on the side does not adjust the volume either. My music plays but no sound comes out. Can someone help me with this issue? I've tried rebooting my phone but still no sound comes out. I currently have the 4S.

    try to activate and desactivate the airplne switch a couple of time

  • TS2755 Whenever I send a message to another iPhone user via iMessage it is sending my Apple ID instead of my phone number.  Could someone help me with this??

    Whenever I send a message to another iPhone user via iMessage it is sending my Apple ID instead of my phone number. Could someone help me with this???

    Check this article: iOS: About Messages
    Additional Information
    You can change your iMessage Caller ID setting on iOS devices in Settings > Messages > Receive At > Caller ID. Note that the Caller ID setting is used only for new conversations. If you would like to change the address from which messages are sent, first change your Caller ID, and then delete the existing conversation and start a new one.
    iMessage responses will be sent from the address the recipient most recently messaged. For example, on iPhone you can receive messages sent to your Apple ID and phone number. A friend sends you a message to your Apple ID. Responses in this conversation will be sent from your Apple ID, even if your Caller ID is set to your phone number.

  • Yesterday for the first time i turned on my macpro 2011 model and i got a crazy gray screen with lines all over it ,so i held down the power button and turn off then restarted and all was ok could someone help me with this,what caused this shut down. werd

    yesterday for the first time i turned on my macpro 2011 model and i got a crazy gray screen with lines all over it ,so i held down the power button and turn off then restarted and all was ok could someone help me with this,what caused this shut down. werd

    Are the lines like psychedelic herringbone?  If yes, I had that happen once, it was something serious, like the
    Logic board. The good news is that it was fixed without any loss of data on the hard drive. Take it in to have Apple look at it ASAP.  I took it to TekServe at the time, they are very nice about preserving your data and user library when possible.
    Good luck and don't panic.

  • My G RAID thunderbolt drive mounted just fine onto my iMac this morning. And now it will not mount despite my various efforts. I don't know what else to do. Can someone help me with this?

    My G RAID thunderbolt drive mounted just fine onto my iMac this morning. I copied some files from another drive onto the RAID drive, ejected it, and worked on another project for a few hours. When I went to mount the RAID drive again so I could work on the project associated with the drive (I'm a freelance video editor) it would not mount. I've tried everything. It boots up perfectly fine, the drive seems to have no hardware problems. It shows up on Disk Utility and in System Information but is listed as not mounted. I've verified it on Disk Utility and it tells me everything with the drive is fine. I've tried all the various restarting my iMac, ejecting and reconnecting the drive, shutting down the whole system and starting it back up, relaunching Finder, and nothing works. Starting to panic because this is a client's drive, I have no idea what the issue is, it worked perfectly fine only hours ago, nothing happened to it in the meantime, and I fear continuously connecting and ejecting it because I don't know what the state is with the data and if this is only going to further aggravate the problem. I've been up and down Apple and g-raid forums and can't get a straight answer anywhere. I need to know that the data is safe, the drive is undamaged, and how to get it to mount on my iMac. Can anyone out there help me with this??

    welcome to the BT community forum where customers help customers and only BT employees are the forum mods
    in order for the forum members to help please can you post the adsl stats from your router you may need to 'show detail' to get all stats (if hub enter 192.168.1.254 in your browser and navigate to adsl or if HH4/5 then go to troubleshooting then logs and you are looking for 2 line together when hub last connected to internet and they will show your connection speed and noise margin or if netgear enter 192.168.0.1). Then run  btspeedtester  (MAC users may have problems). when first test completes then run diagnostic test and post the results ( do not reset the router).
    Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal
    Someone may then be able to offer help/assistance/suggestions to your problem
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • HT4009 I am being over charge for candy crush, can someone help me with this ?

    Hi
    I am being over charge for candy crush, can someone please help me with this...?   Thanks

    Contact the App's developer to inquire about that.  Failing that, you could try here:
               http://www.apple.com/support/itunes/contact/

  • Can someone help me with this 201435 Error during Signal Express signal generating?

    I built this signal generation tast to generate a voltage waveform. The wave form is loaded from a lvm file. (as shown in attachment pic). The waveform can be correctly viewed in preview window, so i suppose nothing wrong with the file. but when i clkick the run button, error 201435 pops up, tell me "no samples provided to DAQmx Write to initialize buffered generation".
    i dont know what step do i missed in this task. can anyone help me with this problem?

    the attachment picture
    Attachments:
    task.PNG ‏9 KB

  • I am trying to send an email to myself and BCC everyone in my address, but have forgotten how. Can someone help me with this?

    I am trying to send an email to myself and bcc everyone in my address book, but have forgotten how. Can anyone help me with this? Thanks.

    http://chrisramsden.vfast.co.uk/7_How_do_I_send_to_everyone.html

  • HT201269 My Apple ID and icloud ID are being used on 2 different iphones. I can't figure out how to seperate them completely. Can someone help me with this?

    I have somehow linked my Apple ID and icloud ID to 2 different iphones. I need help on how to disconnect one of the iphones from my ID and give it a new one. Hopefully without losing all of the saved information on the phone (contacts, pictures, etc)
    Can anyone help me with this?

    Hey shelldolfin,
    Thanks for the question. To disassociate a phone from your Apple ID and iCloud account, simply sign out of the following services:
    - Settings > iCloud (When prompted, opt to keep the information on your phone)
    - Settings > Messages > Send & Receive
    - Settings > FaceTime
    - Settings > iTunes & App Store
    For further information, see this related article. While it refers to what to do after you change your Apple ID, you can use the helpful information to achieve your end goal:
    Apple ID: What to do after you change your Apple ID
    http://support.apple.com/kb/HT5796
    Thanks,
    Matt M.

  • Can someone help me with this program?

    Can someone make this program for me?
    Make a Java-webapplication containing a few webpages (html-files and servlets, but NO jsp's). With this application you can get bankdata from a database, for example:
    page 1: html-file: Welcome on the website, type your bankaccount and password
    page 2: error if bankaccount doesn't exist or wrong password
    page 3: welcome with name and option to choose for your balance or a list with transactions from that account (the user can give a starting date)
    page 4: showing the balance or the list with transactions, name and accountnumber
    Store the information about the account and name in sessionsvariables
    the database is an access-file with two tables
    table Accounts with colums: accountnumber, name, balance and password
    table Transactions with colums: accountnumber, amount, plus/minus, date, sorttransaction and contra-account
    (when I need to send you the database by mail, you can ask me ...)
    maybe someone can help me,
    thanks in advance
    greetings Bastiaan

    Sure we can help you. Post the code you have already and explain any problems you are currently having together with any and all complete compiler error messages and/or exceptions.
    But no, we are not going to do your homework for you.

  • Can someone help me with this powerpoint viewer with director issue?

    I have 'inherieted' an interactive CD that was built using director mx2004.  I get presentations from different people and put them on a CD to hand out at the end of a seminar. For the Power Point presentations I have director use the powerpoint viewer just in case someone does not have PowerPoint on there machine.  This works fine, but I have been getting people that are using PowerPoint 2007 which uses a different extension (pptx instead of ppt).  I also have word documents, adobe pdf, ect.  Here is the code that handles how to open up the files, whether using PPT viewer or the default program. wasn't sure if you needed all of this or not.
    --RUNS WHEN MAIN OPEN BUTTON IS PRESSED--
    on mouseUp me
      --if button 1-5 has been clicked
      if(_global.btnNum = 0 or _global.btnNum = 1 or _global.btnNum = 2 or _global.btnNum = 3 or _global.btnNum = 4 ) then
        --assign selected file to a variable
        selectedFile = sprite("listBox").selectedItem.data
        --path of the file that is selected
        filePath = "workshops\days\day" & _global.btnNum & "\" & selectedFile
        --find out the type of file
        fileExt = selectedFile.char[(selectedFile.length-2)..selectedFile.length]
      end if
      --if file is classified secret and not provided on this disc (must have "*" at data end)
      if(selectedFile.char[selectedFile.length] = "*") then
        --set file to placeholder.ppt (since it has an * at data end)
        filePath = "workshops\placeholder.ppt"
        --set file extension to ppt (since it has an * at data end)
        fileExt = "ppt"
      end if
      if(fileExt = "ppt")  then
        --opens file in powerpointviewer
        _player.open(filePath & " /S", "launchers\PPTVIEW.EXE")
        else
        --opens file in the default program on that computer
        _player.open(filePath, "launchers\PLAY.EXE")
      end if
    end
    I have been trying to get the pptx files to also open in the viewer.  I have been able to do this, but the problem is it wants to try to open everything in viewer.
    Here is what I have tried:
    1- This wants to open everything in PPT viewer.  Not sure why.
    if(fileExt = "ppt" or "pptx")  then
         --opens file in powerpointviewer
         _player.open(filePath & " /S", "launchers\PPTVIEW.EXE")
         else
         --opens file in the default program on that computer
         _player.open(filePath, "launchers\PLAY.EXE")
       end if
    end
    2-This will just open the 'pptx' file in Power Point.  I am sure I am using the 2007 version of PPT viewer in director.
    if(fileExt = "ppt")  then
        --opens file in powerpointviewer
        _player.open(filePath & " /S", "launchers\PPTVIEW.EXE")
      else if(fileExt = "pptx") then
        --opens file in powerpointviewer
      _player.open(filePath & " /S", "launchers\PPTVIEW.EXE")
      else
        --opens file in the default program on that computer
        _player.open(filePath, "launchers\PLAY.EXE")
      end if
    end
    I am not sure where to go from here.  Can someone help me?  Have not been using director for very long.
    Thanks

    It's unclear what exactly is the problem: is it managing to distinguish and open PowerPoint 2007 (*.pptx) files, or is it that every file tries to run in PPTView.exe?
    Part of your problem might be that .pptx is 4 characters long, while .ppt is only 3, and the code dealing with the file extension:
    fileExt = selectedFile.char[(selectedFile.length-2)..selectedFile.length]
    will only grab the last 3 characters regardless of where the "." is.
    Create a new #movie script member (press Ctrl + Shift + U and then hit the + button - "New Cast Member" - at the top-left of the script window that opens). Set the script syntax to JavaScript by altering the drop-down just below the + button and paste in the following:
    function jsGetExtension(fName){
      if(typeof(fName)!="string") return "";
      return fName.split(".").pop();
    Then use the following modification to your original script:
    global btnNum
    --RUNS WHEN MAIN OPEN BUTTON IS PRESSED--
    on mouseUp me
      --if button 1-5 has been clicked
      case btnNum of
        0, 1, 2, 3, 4:
          --assign selected file to a variable
          selectedFile = sprite("listBox").selectedItem.data
          --path of the file that is selected
          filePath = "workshops\days\day" & btnNum & "\" & selectedFile
          --find out the type of file
          fileExt = jsGetExtension(selectedFile)
      end case
      --if file is classified secret and not provided on this disc (must have "*" at data end)
      if (selectedFile.char[selectedFile.length] = "*") then
        --set file to placeholder.ppt (since it has an * at data end)
        filePath = "workshops\placeholder.ppt"
        --set file extension to ppt (since it has an * at data end)
        fileExt = "ppt"
      end if
      case fileExt of
        "ppt", "pptx":
          --opens file in powerpointviewer
          _player.open(filePath & " /S", "launchers\PPTVIEW.EXE")
        otherwise:
          --opens file in the default program on that computer
          _player.open(filePath, "launchers\PLAY.EXE")
      end case
    end
    However, I'm nervous that you aren't supplying the full path to files and executables. I don't know where the movie file that contains this code is relative to the folder "launchers\" or "workshops\" put I suggest you prepend the movie's full path (or the application's full path) like so:
    global btnNum
    --RUNS WHEN MAIN OPEN BUTTON IS PRESSED--
    on mouseUp me
      mPath = _movie.path -- OR _player.applicationPath
      --if button 1-5 has been clicked
      case btnNum of
        0, 1, 2, 3, 4:
          --assign selected file to a variable
          selectedFile = sprite("listBox").selectedItem.data
          --path of the file that is selected
          filePath = mPath & "workshops\days\day" & btnNum & "\" & selectedFile
          --find out the type of file
          fileExt = jsGetExtension(selectedFile)
      end case
      --if file is classified secret and not provided on this disc (must have "*" at data end)
      if (selectedFile.char[selectedFile.length] = "*") then
        --set file to placeholder.ppt (since it has an * at data end)
        filePath = mPath & "workshops\placeholder.ppt"
        --set file extension to ppt (since it has an * at data end)
        fileExt = "ppt"
      end if
      case fileExt of
        "ppt", "pptx":
          --opens file in powerpointviewer
          _player.open(filePath & " /S", mPath & "launchers\PPTVIEW.EXE")
        otherwise:
          --opens file in the default program on that computer
          _player.open(filePath, mPath & "launchers\PLAY.EXE")
      end case
    end

Maybe you are looking for

  • Sapinst stops with error while installing ess component for Java AS

    Dear experts, I really hope you can help me with this one, We are installing a ABAP/Java AS development system and sapinst has gone through 75% of all execution tasks nicely, but then stopped with error while deploying components for the Java AS: ERR

  • Disconnecting Internet

    Hi, I play a game called Enemy Territory on PC, but whenever I join a server to play, my whole internet disconnect. I have a BT Home Hub 1.0 and a 1MB internet speed. It also happens when I log on to Xfire, My whole internet disconnects and my home h

  • Every time I try to download something Safari closes itself

    Every time I try to download something Safari closes itself. What could be the problem?

  • Getting  java.lang.ClassCastException during replication - 080003

    <Warning> <rmi> <080003> <RuntimeException thrown by rmi server: weblogic.cluster.replication.ReplicationManager.create(Lweblogic.rjvm.JVMID;ILweblogic.cluster.replication.ROID;Lweblogic.cluster.replication.Replicatable;)           java.lang.ClassCas

  • Oracle text - issue with contains query

    Hello, Need urgent help. Following code in my procedure is giving me error. TYPE c_1 is ref cursor; result_cursor c1; i_text2 := 'NEW%'; open result_cursor for 'select /*+ INDEX_SS_DESC(e cad_addr_idx2 )*/ from cad_address where contains(text, {:i_te