OMGosh, alarm clock woke me up 8 am and I cant shut it off, just keeps going and going, how do I shut it off please help???  Thx

 

When the alarm is going at the bottom of your screen there will be a line with dismiss on the left and an arrow heading to theright. You have to sweep that arrow to the right for the alarm to be dismissed and finally stop. Don't feel bad the same
thing happened to me. The first few days I went to the app alarm and turned it off from there until on about the third day
I finally noticed the dismiss arrow.

Similar Messages

  • Alarm Clock messes up the UI responsiveness and headphone jack is messed up.

    I have a problem where the alarm going off makes the UI almost impossible. I have to keep tapping on the snooze or the disabling button until it finally takes my input, it is aggravating. Another one is that when I tap on the headphones, from the jack, the music switches to handset, I have to tap it a bit hard and at a certain point again to get it to switch back to headset.
    The headset jack problem got worse in an update with 6.0(later type of 6.0 version), so I reverted(maybe the first 6.0 version), but that doesn't fix the problem, still, but it is less aggravating than before.

    Hi megamanx,
    Welcome to the BlackBerry Support Community.
    To rule out any possible software issue that may be causing this, please try to back up your data using the BlackBerry® Desktop Software and perform a clean reload of your BlackBerry® Device Software. For further instructions, please see the following KB articles.
    For Windows®: "How to perform a clean reload of the BlackBerry Device Software for Windows" http://bbry.lv/GI9beY
    For Mac: "Perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software on a Mac computer" http://bbry.lv/J0UN1U
    Please test to make sure the issue has been resolved before restoring any data from your backup file.
    Hope this helps.
    -FS
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click Solution? for posts that have solved your issue(s)!

  • Hi I dropped my I phone 5 and the screen cracked at the weekend but my phone was still working so I woke up the next day to find my screen was black its turned on but I can't see anything but black please help

    Hi I dropped my I phone 5 at the weekend and the screen cracked but the phone still worked. I woke up the next morning to a black screen but the phone is still on ( you can still hear its on ) but just a black screen please help

    Unfortunately, it doesn't look like there're any software-related fixes available.
    Good luck!
    There is a DIY for iPhone 3GS here, but you'll need to do some net searching to find something for iPhone 4. Also remember that this would totally void whatever you have with Apple, so....!

  • Alarm clock issue

    So there is an issue with alarm clock since 4.4.4 update and it is still in 5.0.2. When i try to clangw Alarm clocks sound it opens File commander not stock sound! In 4.4.4 usualy after Restarting phone all worked fine for some time, but now in 5.0.2 it is not fixing problem. Any ideas how can i get in stock alarm clocks sounds? Or fix it at all?
    Solved!
    Go to Solution.

    You could clear defaults for all apps in settings-apps-all.
    All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

  • Alarm clock Fails to ring

    There is an annoying bug with the Nano alarm clock whereby it fails to ring, and I hope there is a fix for it.
    I get this behaviour mostly by doing the following:
    Set a recurring alarm to say 7
    After midnight on the date of the alarm and before it is due to ring, change the alarm time to one hour earlier.
    result is that the alarm fails to ring.
    This is a 5th gen Nano. Any fixes out there?

    thx, but it has external speakers though it is hooked up to a Bose system overnight.
    The alarm does work the mojority of the time, but in some situations (such as outlined above) does not

  • Alarm Clock apps?!?!?!?!?!?

    This is quite ridiculous. The clock app that comes with the iPhone has absolutely NO customization options whatsoever when it comes to alarms, and its just flat out lame. (Apple really outdone themselves to keep everything absolutely simple, they failed, as in functionality, on this criteria this time)
    I went on to search for alarm clock apps on the app store and found this free version of Alarm Clock Pro and tried it out, I liked it a bit, it offered a bit of customization than the built in clock app the iPhone comes with. So I went on ahead and bought the Pro version for .99 because the ads on the free version were annoying.
    But wait, you have to leave the alarm clock app opened throughout the whole night for it to work to wake you up in the morning? HUH?? WHATS GOING ON?? I always wake up to find that half of the battery from my iPhone is drained because of the alarm app!!!! Ridiculous! I previously owned an android phone and was able to quickly find a free alarm clock app on the market that offered even more customization and all for free, and you dont need to have the app opened for it to work!!
    Someone please tell me there is something else for the iPhone that can be like that, while I already wasted .99 cents on the suppose BEST alarm clock app for the iPhone, I'm even willing to pay for a new alarm app that offers the same exact thing the android has to offer.

    Unfortunately no alarm clock app will wake you up to a mp3 from your library when it's not open.
    This is something Apple has not allowed. We tried to come up with a solution ourselves with our alarm app but as other developers realized it cant be done . We are still working on a solution though; not giving up!
    Our app if interested is alarm app that wakes you up and speaks short weather reports to you http://itunes.apple.com/us/app/sleep-fm/id388631053?mt=8#
    cheers

  • Using the Alarm clock -- does the ipod need to be on the charger?

    Does the ipod (touch 4g) have to be on the charger in order for the alarm clock to work?
    Or does the ipod "awake" from the off position and sound the alarm?

    The alarm will work if the iPod is asleep (screen goes black automatically after set period of inactivity or you momentarily press the power button and you have to slide to unlock). However, if you power it off (hold power until power off slider appears and you slide it) it will not alarm.

  • Samsung Juke Alarm Clock Not Working

    I love my Samsung Juke and really do not want to replace it, but now my alarm clock is failing on me. I set it to go off two days ago. It never went off, yet the alarm was still set to "on". I even left the alarm on until today to see if it ever would. Nope. I also set two other alarms at different times. Same problem. My phone seemed to have this same issue around the new year of 2011 as well but a quick restart fixed it. It didn't work this time. Is there something I can do or am I doomed to use an actual alarm clock that wakes me up in a terrible mood?
    Help! I love my little blue swivel brick!

    Hi there taintedlove908! Regarding the alarm function on your Samsung Juke... When the time arrives for the alarm to alert you, does the device simply remain dormant and quiet or does it light up silently? What I'm trying to determine is if this is a feature failure within the phone or an audio issue. Thanks for your patience. I look forward to hearing from you!
    DionM_VZW
    Follow Us on Twitter! www.twitter.com/vzwsupport

  • Alarm clock sometimes going off hour early.

    I was under the impression that this alarm clock bug was only affecting people in other countries after daylight savings. However, it is happening to me in Chicago right now!
    I noticed this yesterday when an alarm I use everyday, woke me up an hour early. it just did the same thing again today. I tried to "trick" it by setting an alarm this morning for an hour later, but strangly it went of at the time I actually set it for.
    Anyone else having this problem in the USA?

    Yes, since last weekend, an alarm is now going off an hour early every day. Hope you get an answer.

  • My iPhone alarm clock is not working. Anyone else?

    My iPhone alarm clock is not working. I have the latest software: 6.2.1. I set my alarm at 11:30 pm to go off at 12:30 am and 3:30 am, neither went off. I actually wok up right before 3:30, open up the clock app to see if my alarm was on and both the alarms were set to off. I have been having trouble with alarms similarly the last week or so.

    Hi Homer,
    I would suggest a re-install of the iPhone to fix this issue.
    Make sure to do a full backup of the iPhone before you do this otherwise you may lose some of your data
    Joe

  • Alarm Clock, Mail and TextFree With Voice

    Alarm Clock:
    I woke up this morning on my own 19 minutes late because my alarm didn't go off! I RELY on that thing to get me up in the morning! When I checked it, it was going off in silent mode but the volume was all the way up and there were no headphones connected... I always make sure that the volume is up on everything, being that every app has it's own volume setting now >:(, every night before I go to bed...
    Mail:
    I'm trying to delete my bulk mail and it's loading only so many at a time. One loading period will pull up maybe nine and the second loading period will load up five. And sometimes, when I highlight mail to delete them, they disappear before I even click delete...
    TextFree With Voice:
    I am getting told by a few people that I'm not answering their calls, but it's not my fault being that it's not notifying me that someone is calling nor does it show up in my recent calls (missed calls) until maybe 30 minutes AFTER they call... In fact, it's STILL not showing me a certain recent call and I know for a fact that this person called me because it's the only number I gave them...
    Oh and in addition to these problems (would have went to a different forum for this but it took me 5 minutes to even get this far)... Does anyone else have a problem with their iPod Touch 4G home button? Ever since I've gotten it, it seems like I have to press and hold or just press harder than any recent iPod Touch generation would require...

    Well it could be a firmware issue with the router.. Try updating the router with a latest firmware from the cisco website.
    And also try using the iPhone 4 with any other network like (Hotspot or Cafe) and see if the voice does work over there or not.
    Also regarding the E1000 router , Try to change the wireless channel on the router you can try with channel 6 , 9 or 11 and then observe the iPhone connection. It could be an interference issue.

  • Alarm clock volume

    Is it possible to set a different volume level for the ring on the alarm clock?
    Woke me up with a right clatter at 5am today!
    A

    Thanks for all the suggestions.
    I'll try and remember to mute the phone tonight.
    I suppose I was harking after my Samsung where one button mutes the phone, (as with iPhone), but the alarm volume is set separately.
    So, even if the ring volume was high before mute, the alarm is still soft and gentle (sort of!).
    I'll submit a feedback thingy.
    Ta
    A

  • Is there a way that iTunes can act as a Radio Alarm Clock? I have found the radio station I enjoy listening to in the iTunes Radio List. Is there anyway iTunes (and my Mac) can be set to come-on and start playing that Radio Station from Sleep mode at spec

    Is there a way that iTunes can act as a Radio Alarm Clock?
    I have found the radio station I enjoy listening to in the iTunes Radio List. Is there anyway iTunes (and my Mac) can be set to come-on from Sleep mode and start playing that Radio Station at specific times of the day?
    Any App or plug-in that does that?
    Many thanks
    Kevin

    Turning your Mac into a clock radio.
    1.  In iTunes create a playlist that contains just the radio station you want to wake up to.
    2.  Export the playlist (as .m3u works well).  Get Info on your playlist file and look at the Open With entry to make sure it points to iTunes, VLC or some other app that will stream your station.
    3.  In iCal create an event entry at the time you want to wake up.
    4.  Right (or Control) click on your wakeup event and select Get Info.
    5.  For "alarm" select Open File.
    6.  Now under Open File there will be a place to add the file to open.  It will probably be some default entry (like iCal).  Click on it will allow you to select "other."  Then use the file dialog to select your playlist file.
    Your Mac will wake you up at the appointed time.  You don't need to keep iCal running.  If you want to put you Mac to sleep for the night then there is one more thing you need to do.  Open System Preferences to Energy Saver and click on the Schedule button.  Check Start up or wake and set the wake up time to slightly before your iCal alarm time.
    Dan

  • My iPhone 4 no longer connects to my car or alarm clock after a recent sync to my computer.  The message at I get when trying to. Connect is "this accessory is not optimized for the device" or something like that.  Anyone know how to fix this?

    My iPhone 4 no longer connects to my car or alarm clock after a recent sync to my computer.  The message at I get when trying to. Connect is "this accessory is not optimized for the device" or something like that.  Anyone know how to fix this?

    Hello there philp_69,
    If I understand correctly it sounds like your phone hasnt been recognized in iTunes on your PC since the last couple of updates. I would use the troubleshooting in the following article which will walk you through the steps one by one. 
    iPhone, iPad, or iPod touch not recognized in iTunes for Windows
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • Alarm clock not working in iOS 7 with multiple alarms set.

    I usually have two alarms set on my phone, both using the stock clock app.  One about an hour before I need to get up (so I can turn the heater on and crawl back under the covers), the other for the time I am supposed to get up.  The second alarm works just fine, but the fist one has not gone off for several days.  They are not recurring alarms because I need to change the time each day due to my work schedule.
    The phone is *usually* in a speaker dock which is plugged into the wall, and works just fine for the purpose of playing my second alarm or any of my music.  When not in the dock, it is still plugged in to the charger but uses the built in speakers.
    Has anyone else had this problem, or does anyone know of a possible fix?
    iPhone model:  iPhone 5
    iOS Version:  7.0.2 (will be updating to 7.0.3 when I return home from business on Nov. 1st)

    Use IHome Sleep. It is great!! You don't need an IHome either!!
    Download Below:
    https://itunes.apple.com/us/app/ihome+sleep-alarm-clock-app/id346249053?mt=8

Maybe you are looking for

  • Report with multiple dimensions in Row and Column with EvEXP

    Hi We are currently running BPC 7.0 SP3 and try to create the report(or schedule) with more 2 x 2 dimensions in the row and column. e.g. row dimension : Outer row is Entity, Inner row is Account column dimension : Outer column is Time, Inner row is C

  • IDM request grouping issue

    Hi All, We have designed our landscape to provision to SAP systems via GRC. IDM is sending add/remove role request to GRC via VDS-GRC web service but request is not properly grouped and logged in GRC. Here is the example: There are two positions name

  • JCO_ERROR_COMMUNICATION: CPIC-CALL: CMRCV on convId: 02667299

    Hi Experts, I am having some issue with PO and ECC connectivity with data load from PO to ECC system via RFC connection RFC is configured in PO , SOA -> Technical Configuration -> System Connections -> Provider Systems -> Connectivity  as below from

  • 404 Error when I try to edit page in ICE

    I use a browser, go to my page, press Cmd+E, up pops the login and password, done, then bang! the page doesn't display, just the host's generic 404 error.

  • Query - Sales Incentives

    Hi My customer needs a Query for sales Incentive. Can any one provide me the solution. Version: SAP Business One 2005B PL; 38