Omit Customer with negative balance when printing aging

Hi All
I am using a crystal layout (converted from PLD) "Collection Report - CR (GB)" that I have downloaded from the portal.
This is a SAP8.8 version.
I have managed to add fields that he client wants, but Im having an issue with the selection Criteria.
Alot of their customer pay in advance so at the time of running the aging, their customer might have a credit balance
so those statements should not be printed and sent.
I tried using this in the Record Selection : {PLD__ITEMS.F_154_Format} > '0' - with PLD__ITEMS.F_154_Format being the balance.
It doesnt leave out the customer its suppose to, instead combines the lines of the next BP with the customer its suppose to leave out.
I even tried bringing in the OCRD table and using the formula in the record selection OCRD.Balance > 0, but then the entire report is blank.
Do i have to use that formula for in each section? to suppress the BP with a negatve balance?
Is there a way to leave them out when running the aging, I tried different option and cant seem to get it right.
Any help will be greatly appreciated...
Thank you
Jerusha

Hello,
Thank you for your input. The limitation is solved in 2007 A / 2007 B version as a part of new Internal Reconciliation concept.
Regards,
Peter Dominik
Solution Manager
B1 Product Definition Team

Similar Messages

  • Moving assets with negative balance to zero.

    Hello everybody
    I have an asset account with negative balance because the monthly depreciation, but now the settings for this account must be zero and not allow negative balances. Which could be the procedure to don't have this account in negative balance anymore and move it to zero and what do I have to change or configure to don't allow any more depreciation for this account.
    Thanks a lot

    Hi Paul, I'm sorry to reopen this post again but I got an error when I did what you said, the situation was that I couldnu2019t change de depreciation key Trans: AS02, because I got an error message saying "Depreciation key xxxx should no longer be changed because the asset has been posted to already". Do I have to make something before in customizing or movement to make this change?
    Thanks a lot
    Regards
    Felipe

  • Separator page prints out with wrong name when printing from Outlook 2010

    Working with Windows 7 Enterprise, Outlook 2010.  We've set up our desk printers to print a separator page with the user's name, as several people use the same printers in our building.  Printing from IE, Word, etc. all work fine, and it'll print
    out the correct username on the separator page.
    When anyone attempts to print an Outlook email, it instead prints out my username.  We've found that it doesn't happen if they click on the "quick print" button, but it happens every time if they do "file > Print" or Ctrl+P.

    Hi
    As per the information and details provided by you that separator page prints out with wrong name when printing from Outlook 2010, please follow these steps: -
    To create a custom separator page file, use a text editor such as
    Notepad. On the very first line, type one single character, and then press
    Enter. The character on this line defines the character used as an escape character. For example, the following list assumes that this character is the at sign (@).
    Enter the escape codes for the functions you want, and then save the file with an .sep extension in the Windows System32 subfolder.
    In the Print Manager, select the printer that you want to use the separator page file with, and then click
    Choose Properties on the Printer menu.
    Click
    Details, specify the name of the desired separator page file in the
    Separator File box, and then click OK.
    Note:
    Put the custom separator page file in one of the following locations:
    In the %Windir%System32 folder.
    In a folder whose path contains a SepFiles folder. For example:
    Drive:\Folder\SepFiles\Subfolder
    I hope this information will be helpful for you.
    Thanks and regards
    Shweta@G 

  • Problems with color matching when printing...

         Hi, I work for a small family business in the P.O.P. industry.  We currently have myself and one other designer, we both take illustrator files that have come from the graphic design firm that we contract with and get them ready to print on our Vutek QS3200.  However ever since acquiring the printer we have begun to run into problems with the colors when printing.  When the files are exported off of my computer, I use either .tif or .pdf files, they print as they should, the colors seem to match the proof and everything goes smoothly.  However when the other designer exports a file, he tends to do mainly pdfs, the colors tend to be extremely different from where we want them.  Also we will get very strange results, such as yesterday he kept getting a faint yellow 1/2" border around his prints.  After I believe 3+ hours of him trying, I was given the original CD and instructed to try.  After 15-20 minutes of making the changes that we needed to make (adding a new price point) and ripping, mine printed perfectly. 
         We both use Macs, both have CS3 Design standard, only differences between the computers are mine is newer and a bit faster, and I'm running OS 10.5.6 and he has 10.4.  He has also at some point loaded various color profiles, whereas my CS package is just whatever the default is when I loaded it.  When we were being trained he grabbed the color profile off of the Colorburst RIP server and loaded onto his computer, plus I believe he has a couple for freelancing purposes on there as well.  My thought is that these profiles are somehow corrupting the files that are going through that computer, but I honestly am lost with it at the moment.  He believes the problem lies within the fact that he does not have the newer OS, I honestly cannot see that as having any effect on this at all.  I was wondering if anyone has run into any similar problems, or if anyone might have any advice on this issue?  I would really like to be able to solve this, as I was hired to do mainly structural design for the P.O.P. and I'm having to put in a lot of overtime to get my work done along with the additional work that I'm having to do.
    Thanks for your time

    I've got a few years experience calibrating large format printers.  First, the Yellow sounds like a file problem.  I used to work with two workstations, one PC ( RIP station ), and one Mac ( file prep station ).  I tend to agree with you in that the OS is probably not the problem.  But, any Colorburst profiles should remain in the RIP, not in the originator application.  My workflow consisted of creating EPS files that were based on established color settings in their given applications ( i.e., Illustrator, Photoshop ) which were interpreted by the RIP which had it's own calibrated profile ( perhaps more than one based on how many different substrates were being used ).  Your partner may be complicating things by incorporating a RIP profile prematurely.  If there are deviations big enough to be noticed, there has to be something in the application color settings that is causing some type of corruption.  This could lead back to the operating system, but I would think it lies somewhere in Bridge or the application color settings.  Start there.  You should seriously consider implementing a calibration system if you do not have one already.  Another slight possibility is the driver's ability to interpret files coming out of Leopard vs. files coming out of Tiger.  It may benefit you both to be in the same operating system dynamics, using the same driver versions and RIP profiles.  At the very least, match everything that is currently working successfully and put them on both machines.  If there is still a noticeable problem in color matching, then something is seriously wrong and you should call in a prepress profiling expert.  Hope this helps.

  • Adobe Reader prints PDFs with magenta hue when printing is set to B&W

    Adobe Reader prints PDFs with magenta hue when printing is set to B&W

    BTW... Asking the SAME thing THREE TIMES WON'T change the answer.

  • Reader Adobe Reader prints PDFs with magenta hue when printing is set to B&W

    Adobe Reader prints PDFs with magenta hue when printing is set to B&W

    BTW... Asking the SAME thing THREE TIMES WON'T change the answer.

  • Problem with margins shifting when printing.

    I have an installation template on an 11x17 sheet with 3/8” margins. There is a “left” and “right” version on each side (basically mirrored) and the intent is that they align front to back when you hold the sheet up to the light. When we print a proof, two sided, on our laser printer, the drawings match when the single sheet is held up to the light, but the margins are no longer the same; each is offset by a 1/16” in the same direction. BUT when you print one sided on our printer and hold the 2 sheets back to back, the drawings are off by 1/8” because the margins are off by the 1/16' in different directions. This creates a problem when it is sent to the commercial printers as they are printing single sided to their printing plates. (The problem still appears in the exported PDF file the printers use)
    The problem is, I can’t get InDesign to stop shifting the content on the page that 1/16”!
    If I look at the page, the margin guides show the correct 3/8”on both sides.
    If I look at the Master page, the margin guides show the correct 3/8”on both sides.
    Under “Margins and Columns” in InDesign, I found the correct margins set (0.375 - 3/8”) all around,  with 1 column and a 0.1667” Gutter. Ha .. I thought I had found it! So I removed the Gutter and checked “Enabled Layout”, But when printed, same problem.
    I then though it must be on the master pages and found and did the same thing as above, still no luck!
    Then I created a new master page and set it up as above and reapplied the new master page, still no luck!
    I’m stumped!?! If we can’t get these margins correct we can’t send it to the commercial printer.
    Thanks in advance for any help!

    Well I don't know for a fact that it is, but the customer is a major International Fortune 500 Company and this is an Installation sheet printed and included in one of their product packages, so I would imagine it is an offset press.
    Besides, if the commercial printer was using a commercial Laser printer, can't they print 2-sided? There is no problem when it is printed 2-sided, the images align because both margins are offset in the same direction. It is only when it is printed 1-sided (one side to each printing plate) that the problem becomes obvious because the offsets are in the opposite directions. (BTW, it is B&W)

  • Table mtl_material_transactions_temp  with Negative balances not allowed

    Hi,
    I have uploaded few wrong cycle count adjustments that got duplicated and now
    they are stuck in
    table mtl_material_transactions_temp  with error
    Negative balances not allowed
    Is there a way to fix them as they are showing  in Un-processed material when
    I try to close the period.
    I need to close they period.
    Re-submitting them also dont works and it get the same error.
    Is there a way to get rid of these record?
    thanks for help.
    7Z

    hi,
    If this message you are getting Negative balances not allowed, you need to increase the onhand quantity in the subinventory and reprocess or better you can delete the record and try it again with the corrections.
    Regards,
    Syed

  • Discoverer Plus - Problem with Page Orientation when printing pdf's

    Hi,
    When printing pdf's in Disco Plus I have a problem:
    My workbooks are a mixture of landscape and portrait pages.
    I am printing the entire workbook and then using cutepdf to produce a pdf.
    If I print to paper I get the correct landscape/portrait settings.
    If I print to pdf then landscape pages appear vertically when I view on screen so that the text is running from bottom to top of the page.
    So it is picking up th portrait/landscape settings from the individual worksheets but cutepdf has not realised that the pages are landscape so they appear on the screen vertically.
    This was not a problem on discoverer desktop so I am confident that this is not a problem with cutepdf.
    Any thoughts?
    Justin

    Thanks 2257648922,
    Version details are as follows:
    OracleBI Discoverer 10g (10.1.2.3)
    Oracle Business Intelligence Discoverer Plus 10g (10.1.2.55.26)
    Discoverer Model - 10.1.2.55.26
    Discoverer Server - 10.1.2.55.26
    End User Layer - 5.1.1.0.0.0
    End User Layer Library - 10.1.2.55.26
    Oracle Database 10g Release 10.2.0.4.0 - Production
    Copyright © 1999, 2005, Oracle. All rights reserved.
    So I assume that means my version doesn't have the bug you mention.
    Any other thoughts would be appreciated.
    Justin

  • Issues with colour management when printing since resetting cs5

    I have recently reset my CS5 so that I could attempt to restore my auto color and auto tone options. Since doing this, my color management is very off when printing.  The images are darker, and more saturated than usual, as well as significant colour shifting.  I have tried various printer and computer settings and tests, recalibrating my monitor and printer, and attempting troubleshooting with articles online. I have also tried resetting photoshop again, thinking that I may have thrown off the settings when trying to fix my auto color options. I have also run nozzle and print head checks, and everything has come up fine. I am pretty sure there is something wrong with the photoshop side of the printing. I am kind of at my wits end as I am running out of ideas to resolve this issue.  I am a windows user, and I am printing on a Canon ipf8100.  Please help!

    u are probably not getting much help on this unless you post screenshot of your process (starting with File> Print window)
    remember, Photoshop can print a document correct regardless of how it looks on the monitor (and vice versa: Photoshop can display a document correct regardless of how it prints)
    i recommend getting a known target like the WhackedRGB.jpg and see where the problem is occuring (in Photoshop color management settings, on the monitor, on the printer or both)...

  • How to ignore the customer with delete stamp when customer identification

    Hi Expert,
       In customer identification of the call center, SAP standard does not ignore the customer which has delete stamp. From our biz, we don't want to catch them when corresponding customer call. And we will create a new customer with the phone number. How can I ignore and create the new customer?
    BRs
    Liu Bo

    Hi,
    open in transaction BSP_WD_CMPWB the component ICCMP_BP_SEARCH.
    Go to View BuPaSelectCustomer
    Go to the IMPL class.
    Redefine method DO_PREPARE_OUTPUT to filter out the customers you don´t want which means delete them from the BOL collection.
    Kind regards
    Manfred

  • Issues with image centering when printing from CS5

    I contacted EPSON tech support about this issue, they are putting the blame on the application used - in my case Photoshop CS5 printing with an EPSON R2880.
    I am trying to figure out exact print tray margins to take into account when printing horizontal 13x19 images on EPSON's Hot Press 13x19 paper on the R2880 (via manual roll single feeder).
    These are not borderless full frame images, 13x19 image files set on white with exact white frames around the image, so the shift in centering becomes quite obvious on the print.
    Here are the two print settings I have tried, both do not center the image correctly:
    Selected Scale to Fit Media & Center Image Top:0 Left 0.105
    Selected Center Image: Top: -10,152 Left -0.118
    (margin values are entered in the print window automatically)

    u are probably not getting much help on this unless you post screenshot of your process (starting with File> Print window)
    remember, Photoshop can print a document correct regardless of how it looks on the monitor (and vice versa: Photoshop can display a document correct regardless of how it prints)
    i recommend getting a known target like the WhackedRGB.jpg and see where the problem is occuring (in Photoshop color management settings, on the monitor, on the printer or both)...

  • Wrong with font file when printing InDesign

    I get an error message when press print and the message is "There was a problem with the font file" (translated from Swedish) I have tried to change font but it dosent help. Anyone that have a solution to fix this problem?
    I have started to use latest InDesign CC when this happened after used it for a couple of weeks. Running a HP 64 bit workstation with Windows XP

    Sounds like it is warning you are missing a font in the document when printing it.
    When you open the InDesign document, In the lower-left corner of your screen, do you see any errors?
    Double-click the error. This will display the Preflight panel.
    Click on the Expansion arrow next to Text.
    Do you see a 'Mssing font' error? If yes, keep expanding until you can select the actual error.
    At the bottom of the panel, click the expansion arrow to the left of Info. You'll be able to see a bit more information about the error, and also a tip on how you can fix it. E.g. you can either install the font on your computer, or replace it with another font before printing. If you click on the link to the far right of the error, it will take you to the text in the document that is formatted with a missing font.
    Cari

  • Finish Internal Order with Negative Balance - Adjustment Balance

    Hi
    The user did not transfer the budget from one year to the other through the KOCO. This procedure was performed in the middle of this year. During this period, some orders that were closed were negative. What can be done to the orders that were closed with a negative balance?
    The balance transfers for transactions conducted KOCO (and KOCF) and take effect for orders closed?
    What can be done to adjust these commands end with a negative balance? If there is any solution, is it a viable approach?
    I can find any sap notes. I still search...
    Thanks in advanced.
    GLippmann

    Hi Ajay! No, in this case, the balance finish negative because the KOCO was not executed and the IO was close.
    We executed last month the KOCO transaction.
    What can we do to correct the negative balance to these IOs closed in this period?
    Thanks

  • Header problem with photosmart 8180 when printing with company letterhead

    I print many letters through MS Word 2003.  When I print a letter on plain paper, it looks fine and is the correct distance (1 1/2") from the top of the page(s).  Our letterhead consists of a 1" dark band with our logo included and our address across the bottom of the page.  I then insert our letterhead to print a final, the printer moves the letter (date, name, address and body) down another 1", meaning the printer is using the bottom of the band to measure the top margin.  It also ignores the bottom margin of 1" and just prints into the address, instead of going to the next page.  Both types of paper are the same 8 1/2 X 11.
    We have Konica network printer and I previously had a HP 930 printer and never have seen this before.  I have uninstalled the printer and reinstalled and the only change I have made since is to change the the paper type, under "Print", "Properties", "Features", "Paper Type", from Automatic to Plain Paper.  Neither helps. 
    I have an extended email list with HP Customer Care, telling me everything from installing a 990C driver (or virtual printer?) to have me check to make sure I knew how to load paper. 
    I then spent over an hour on the phone with an HP rep and even gave him control of my computer, to no avail.  He thinks he fixed the problem by having me reduce the top margin, to say 1/2" and basically trick the printer into printing at the correct place below the band, but the second page is now too far up because of that.
    I hope someone can help.  I found it hard to believe that this has only happened to me. 
    Thanks for any help.
    Dean

    Hello,
    at first, what kind of intemec priter do you use? Is it host or stored ipl mode?
    value for intermec pm4i in host mode:
    my suggestions is the labelsoftware for this printer and the addon tool for r3.
    Best regards,
    Nino

Maybe you are looking for