Omit one field in maintance view

HI
I Have table with 4 fields and i want to create maintenance view but just for 3 fields
on the maintenance view how i can do that ?
Regards
Joy

Hi,
Well if you want to create a maintainence view based on a table without of of the fields you can just choose the three fields to be added to the view field after you enter the table name in under the joins/conditions and then in the view fields table click on the table and only choose those fields which you want to show.
If you want to create a table maintainence generator for a table in order to maintain that table and you dont want all the fields in there you can simply generator the generator and then go to the screen and deleted the field that you dont want to have there.
Regards,
Himanshu

Similar Messages

Joining Two Fields Into One Field for a View

I am trying to create a view based off of multiple tables.
I have all of the joins and everything done nicely and working properly.
However, when I get to this one step, that's when I start running into problems.
I just want to join (or concatenate) two fields together with a period character in between them.
For example, if I take FirstName and LastName, then I want them to become one field called Name, appearing as "JOHN.DOE"
When I try to join them together, the problem comes up with the period character.
A sample code of what I have done is here:
BEGIN
EXECUTE IMMEDIATE 'create view VIEW_LALALA
as SELECT t1.FirstName + '.' + t2.LastName as Name, t1.something as Something, t2.ooo as OOO
FROM (tableFirstNames t1 inner join tableLastNames t2 on t1.nameID = t2.nameID)
END;

832667 wrote:
I am trying to create a view based off of multiple tables.
I have all of the joins and everything done nicely and working properly.
However, when I get to this one step, that's when I start running into problems.
I just want to join (or concatenate) two fields together with a period character in between them.
For example, if I take FirstName and LastName, then I want them to become one field called Name, appearing as "JOHN.DOE"
When I try to join them together, the problem comes up with the period character.
A sample code of what I have done is here:
BEGIN
EXECUTE IMMEDIATE 'create view VIEW_LALALA
as SELECT t1.FirstName + '.' + t2.LastName as Name, t1.something as Something, t2.ooo as OOO
FROM (tableFirstNames t1 inner join tableLastNames t2 on t1.nameID = t2.nameID)
END;to concatenate two string together do not use "+", but "||"
SELECT FIRST_NAME||'.'||LAST_NAME FROM EMP;

Issue while Creating the records in OAF by disabling one field.

Hi Experts,
I am having the scenario like this.
From the OAF page I want to create the record by omitting one field(it is disable for OAF).
Consider the folowing scenario..
I am having the following fields Empno,Empname,Salary,Job in the OAF page where I made the Job field alone as disable and the style i am using for job field is message text input and i have set the initial value as 'Manger'.
I am facing issue while creating the records in OAF page without the job filed value ie 'Manager' then the records were not inserted into my tables. Whereas if I enable the job field in OAF page(meaning I gave the job as 'Manager' in OAF page) I am able to create the records from OAF page and able get inserted in the database.
Could Anyone can suggest where I fail as it is my Priority issue.
Any Suggestion will be a great help for me.
Thanks,
Murugesh.

or you can default it in the controller by handling add row event
if(vo.hasNext())
vorow = vo.next();
vorow.setAttribute("xxxx",3838);
--Prasanna

Problem in Adding Field in the View

Hi Friends,
I want to add one field in the view of Interaction Center Webclient.
I copied the view to the Custom BSP and when i try to Add the attribute in context node the Required Attribute is not available in BOL Entity.Please Help me How to Proceed this.
Thanks & Regards,
Ashok.

Hi,
Create ITAB as follows:
Fetch all the data from all the columns SME001 to SME016 in the respective columns in internal table itab.
Make use of field-symbol to add the value of the corresponding columns as follows:-
<FS1> as line type of ITAB
<fs2> type any.
Assume period selected is 007
LOOP AT ITAB ASSIGNING <FS1>
DO.
IF PERIOD = 000.
exit.
ENDIF.
Concatenate 'SME' period into LV_VARIABLE.
Assign component LV_VARIABLE of structure <FS1>
to <FS2>.
if <FS2> is assigned.
sum = sum + <FS2>
endif.
period = period - 1.
ENDDO.
ENDLOOP.
So now sum will contain the sum of the values of SME001 to SME007.
I hope it is clear.
Regards,
Ankur Parab

How to enter values for newly inserted field for maintenace view table

Hi ,
I have inserted new field for custom table which consits of maintance view..
I want to put some values in to this newly inserted field..
When i try to insert values bu useing se16,iam unable to view this newely inserted field..
Can you please let me know how can i insert values to this newely created field
Thanx,
Parnith

Hi Parnith,
It is easy to use a table maintainance to enter values to a database table....
if you have a table maintainace generator and you are not able to see the newly added field here is the reason
Everytime you add a new field , the table maintainance needs to be regenerated..The reason is that the screen you are using in the table maintainance is created within a program with respect to the fucntion group and not directly linked to the table..whenever you change the table,the function group is not affected and changes are not reflected in the table maintainance , so you have to regenerate by utilities-> table maintainance generator in sell for that table..once you do it , the function group assigned to the table automatically creates a new one with the latest fields added
Reward if helpful
Regards
Byju

How can I pass field value betwen view in ICWC?

Hi experts,
I am new to this BSP programming. I have some requirements to modify standard ICWC in CRM 5.0
Hope can get some advices and helps here.
I have added a new field called <status> to context note SEARCHCUSTOMER in BupaSearchB2B view and also the same field name to context note CUSTOMER in BupaCreate view.
I have added the field into both the HTM views and able to execute thru WebClient. However, I have one problem in passing the <status> value from BupaSearchB2B view to the BupaCreate view when I click on the 'create' button.
I do search and saw this thread How can I pass field value beetwen view in IC Web Client? , but i cant figure out how it works.
Do I need to create the field <status> to context note CUSTOMER in BupaSearchB2B? Currently the context note does not have any attributes.
Really appreciate for any help.
Edited by: mervyn tay on Apr 7, 2009 11:42 AM

solved by myself...
code in the CREATE_ACCOUNT method.
ev_entity->set_property( iv_attr_name = 'ZZICNO'
iv_value = lv_icnum1 ).

Adding fields in costing view of material master

Hi gurus,
I need to add 4 fields in costing view of material master. I have followed the steps in SPRO, for configuring customized screen in material master.
1) Created a function group YMMCO and copied the screen 2904 from program SAPLMGD1.
2) Added 4 fields in my customized screen.
3) Created copy of 01 ( Screen reference ) to z1 in OMT3B.
Since 2904 is not there in the sequence . I changed one 0001 sequence at the end to 2904 . I also assigned my program
SAPLYMMCO to it. I can see the changed fields in data screen and subscreen.
4) Then I assigned the SSq to z1 in transaction OMT3E.
But unfortunately, when I go to MM01 to create a material , I am not able to view the fields I added in costing view.
I have checked the screen for the previous field, it shows 2904 only.
Two days back, I did the same thing in basic data view 1 , it was working properly. As per client's suggestion I put it in
costing view, it is not working . Please give me suitable suggestions.
Thanks in advance.
D. Mallick

Hi,
I also need to add custom fields to Basic data view. After copying & changing the screen sequence in Config, I could able to see the custom fields in Basic Data view.
I have appended structure with custom fields to MARA table.
But the values I enter in the screen is not getting updated to the table MARA.
Can you please let me know the code, I should have have in PAI (Process After Input) module in the Sub Screen to update the values?
Thanks,
Dasa

Is there a way to Search (List search) for more then one field text from a column for Bulk uploading?

I've been trying to find more information on this and I apologies if this has already been answered. I just don't know the correct way to ask this. We have a SharePoint List at the company that we have people input information into different columns. The
problem is most of those information are very repetitive. Is there a way for me to search more then one field text in the column and just input that same information in?
ex:
Column 1
Column 2
Date:
883851
MidWest
User input
8831518
MidWest
User input
On the search field in the SharePoint List, I would need to search for 883851, 8831518 etc, would view those requested numbers, then I would click edit and change dates to those rows. Does that make sense? I'm sorry I'm fairly new at sharepoint.

I think what you're asking is about having repetitive options in a list, show up easily for new items being created.
This can be done by setting the columns that contain repetitive information to Choice fields. In the configuration of the Choice field, check the box for "Allow custom values". Now as users are entering data into the list, the dropdown of options
for a given field grows and users can quickly see and select previously entered and thus repetitive values for the given fields.
I trust that answers your question...
Thanks
C
|
RSS |
http://crayveon.com/blog |
SharePoint Scripts | Twitter |
Google+ | LinkedIn |
Facebook | Quix Utilities for SharePoint

Passing one parameter to multiple views

Is this possible? I would like to pass one parameter, a date field, to multiple views. I cannot use it in the record selection, because my views do a mathematical computation which returns a single value, but I only want to select the data for a single day.
The problem is that there are several views and I do not want to have to enter the date parameter a dozen times.

Try to use add command and write the query like this
select * from view where datefield={?date}
also create another add command for the other view
select * from view2 where datefield2={?date}
for all the queries create the same parameter with the name {?date}
Regards,
Raghavendra

Manipulating fields in a view

I have a table with a date and a time and I really need that data in a datetimestamp format. I'm trying to avoid creating a custom table and a custom program to get this information that already exists in this table.
If I put the data in a view, is there any way to perform calculations on the fields and show that as another field in the view?
I've got a view partially set up, but I just don't see a way to manipulate the fields to that degree?
Or any other way to do this without creating a custom table with the right field type and a program that converts the data from one to the other?
Thanks for any help.

Within the view?
Let me restate my question, because I think we're all confused.
I am looking at the table PEVSH.
I need to use a few fields from this table, including the date and time, but I need that together in a timestamp format, not in two seperate date and time fields.
Is there a way to create a view of PEVSH that displays those two fields together into a timestamp field?
I'm not seeing how I can use a maintenace generator to do that if I don't have the field. The same with the edit mask, there's no field to put the edit mask on.
If I can't do it in a view, is there a way, if I create a custom table, to have lines inserted into it everytime PEVSH is updated?
I'm happy to award points for helpful answers, but please consider my total problem when answering. Thanks.

How to find out the max/min value of one field corresponding to a second field in HANA through graphical way.

Hi,
I am trying to find out the latest delivery date(EINDT) for each purchasing document (EBELN) through graphical way.
The view contains other fields apart from the above mentioned two fields.
When only the two fields (EBELN, EINDT) are there, then in semantics, I can select 'Max' as aggregation to get the maximum value for each document.
If I do like this, then I need to join more than 3 views and also so many joins in calculation view. Taking so much time for data preview.
Hence , please help me in getting the solution while the view contains other fields also.
Thanks in advance.
Thanks,
Jyothirmayi

Hi Sreehari/Vinoth,
Thank you for your replies.
if only two fields are then I can get the max/min values of one field corresponding to other field.
But more than two fields are there with different values, then let me know how to find out the max/min value of a particular filed corresponding to the 2nd field with other fields also should be in the output.
I hope you understood my issue.Please revert in case of questions.
Thanks & Regards,
Jyothirmayi

How to populate read only input field or text view form value help only

Hi experts,
I have one requirement to populate a read-only field or text view from value help.
User cant put any value there.value comes only from the value help.
For example,
when we read context using Code Wizard,we cant type any value there.value only comes from value help.
How to implement that functionality?
Please reply.
Thanks in advance,
Subhasis.

Yes it is possible.
1.Create a context Attribute and then bind this attribute to the Text view UI element.
2. read context attribute and then set value to the context attribute like this way.
DATA:
    elem_context1                        TYPE REF TO if_wd_context_element,
    stru_context1                        TYPE if_first=>element_context ,
    item_potxt                          LIKE stru_context-potxt.
get element via lead selection
elem_context1 = wd_context->get_element( ).
stru_context1-potxt = 'PO'.
elem_context1->set_attribute(
    VALUE = stru_context1
    name   = 'POTXT'
thanks
Suman
Edited by: suman kumar chinnam on Sep 9, 2008 12:12 PM

Adding field in Maintenance view of table

Hi,
I am trying to create a custom maintanable table. Now the requirement is I need to add one more extra field in the maintenace view of the table which should not be in the table fields and is for display only in the maintencae view.
I tried adding a cloumn by editing the screen program generated by the table maintenance generator. I get the the display in the maintenance view of that extra field. But I dont get the values populated.
Can you please let me know in which PBO or PAI i should write the module programe ..
Help will be rewarded with points.

Hello Bluesh
Normally the extra field should be from a table that has a foreign-key relationship to your main table. Thus, add this additional table to the list of tables for the view. If it does not have a suitable relationship you cannot add it to the list of tables.
Afterwards add the required field to the list of view fields and set its property to 'R' = read-only.
If correctly defined there is no need at all to modify the screen(s) or the coding of the PBO/PAI modules.
Example: your z-table contains field KUNNR (value table KNA1) and you want to add the NAME1 field to your maintenance view
add table KNA1 to the list of tables
add field NAME1 to view fields
set its property to 'R'
regenerate function modules and screens
Regards
Uwe

Displaying Description for SAP Table Field in the View

Hi
We are working on a HANA implementation Project Where we have a requirement to build View on HR tables.
Issue: When i join HR infotypes (tables ) in the view it is getting only Technical names and not descriptions. i have used Semantics option which is available and still it doesn't bring description in to the View.
Please let me know if any one has solution or work around for this.
We have more than 100 fields in the View so maintaining Descriptions manully will take lot of time.
Regards
Venkat

Hi Chandra
Yes, We have Description available in the sourece tables.
We are connected to HANA Suite and tables in ECC having Descriptions.
Regards
Venkat

F4 help for fields in maintenance view resp. generated maintenance screen

Hello,
Im new to ABAP and I have to deal with the following requirement:
I have a maintenance view V1 what from a maintenance screen was generated automatically by the maintenance screen generator.
Now I have to add a search help for one field F1 of the maintenance screen. The values for the search help of F1 depend on a specific value of a second field F2 of the maintenance screen. So I need value of F2 as import parameter for f4-help. F1 and F2 come from different tables.
As Im new to ABAP I have several questions or thoughts:
- Im not able to easily add a search help to F1 because Im using the maintenance view V1 and thats why it is not possible to assign the import parameter F2 to the search help right?
- In general, its not that easy to add search help to views than tables or structures - why?
- Im not able to just modify the generated objects because further automatic generation of the maintenance screen will delete it right?
- The generated function module provides user includes to add user specific coding. Is there any chance to add a f4-help to field F1 and assign value of F2 to that search help as import parameter with coding in user include?
- any other ideas? I did not expect this topic to be so complicated as the requirement to change f4-help in a maintenance view resp. screen isn't very special.
can anyone help me?
Thank You!
Regards
Fabian

Hi Fabian,
Phew! Thats quite a few questions in one... I'll try to answer them to best of my knowledge..
You can definitely have an external Search Help for a field of a Maintenance View, by calling it directly in the Screen Action Flow, using a PROCESS ON VALUE-REQUEST (like PAI or PBO). While defining such custom code on a generated screen, always make sure you do not write the coding inside the generated includes (SVIM* or <FUGR>TOP, <FUGR>DAT, etc..). Define new includes, or use those which are not generated by View Maintenance. This way, even if the dialogue is regenerated, your custom code will not vanish.
This will answer your questions 1 and 2 generally, and your question 3 also.
A Maintenance View, is something where values are read and populated purely at run-time. It does not have an Entry Help or such options, as it depends on the underlying tables. I hope this further helps with questions 1 and 2.
Coming to your question 4 and 5, which form the main question - pre-filling value of F2 while calling search-help for F1 - yes, it is possible. On the view maintenance screen, there are standard structure variables (like EXTRACT TOTAL etc), which will give you the field values of the current record. But, it can no way assure that when you call the help for F1, the field F2 is already filled!
For this, I can suggest that you programmatically implement a check to see if F2 value is filled, and read if it is. Or, if it is not filled, maybe you can shoot a Pop-up for F2, take the value at run-time, find help for F1 and get value, and also fill the F2 value (from your implementation) into the currect screen F2 value! (Phew...it is complex...)
But am sorry, there is no other way, wherein you can gaurentee that F2 value is pre-filled always, when you can help for F1. (You could try making F2 as obligatory on screen, but it still doesnt necessarily solve this purpose..!).
Hope it helps. Get back to me by e-mail if you need more help, or simple post a reply.
Regards,
Rekha

Omit one field in maintance view

Similar Messages

Maybe you are looking for