OMJJ update Control
I am trying to add the X for the REC in the field in OMJJ for mvmt type 651. My problem that I am trying to correct is I have a return sales order that is returning free of charge item and I am receiving the error message that 651 X L update control of movement tyep is incorrect. My problem is that I can not locate where to allow this change in OMJJ as the area to add the X in update Control/WM Movement under REC is greyed out. When I select the line item and go to the magnifying glass it is all greyed out as well... Where can I make this change? I have searched the forum and can not locate the answer. We are on ECC 6.0...
Hi Sai
Thanks for responding....the value updation in also greyed out....
When I go to Update control/WM Movement types
I have 651 No Indicator for value; indictor selected for Qta; no S Mvt is L Rec is Blank
I have another line with 651 Val indicator selected Qua indicator selected, no S Mvmt L
You can not change the Mvtm Ind receipt ind value updating or quantity updating in client 100 it is greyed out...that is my problem
Where can I change this?
Similar Messages
-
Update control of movement type is incorrect
while planning for a material with mrp type pd and strategy group as 20(make to order) i created a customer requirement against which after running mrp the tran md04 showed purchase req for a particular material which was released by me and converted into purchase order by me.
but when I wanted to do goods receipt against the po generated it is giving me this error in tranc migo.
ERROR IS "update control of movement type is incorrect entry (101 X X e b _ v)
the performance assist screen shows this
Update control of movement type is incorrect (entry 101 X X E B _ V)
Message no. M7226
Diagnosis
The system could not find entry 101 X X E B _ V in any of the movement type control tables.
Procedure
Cancel current processing.
Contact your system administrator.
Action to be taken by the system administrator
Check in Customizing for Inventory Management under Copy, Change Movement Types whether the entry is contained in the Update control view for the movement type.
If the entry is missing, proceed as follows:
For standard movement types, this means that the given process is not supported using the present data combination. Do not create any entries without prior arrangement with your SAP consultant. Otherwise, incorrect postings may result.
For customer-defined movement types (beginning with 9, X, Y, or Z), this may mean that they have not been fully defined. Delete the movement type and re-create it by copying a standard movement type.Hi
Check the T code OMJJ for the defining the MVt type also check the error is coming for MVT type 101 then check with mvt type 101 in t code OMJJ and check the updation control there.
also consult your MM consultant for this error
Regards
Anupam Sharma -
Update control of movement type incorrect
Dear all,
I have run a complete sales cycle from sales order creation to excise invoice generation. However, I have not done the PGI since in our case it is done after the billing. The materials have been dispatched and excise invoice submitted.
Now, when I am doing PGI it is throwing an error "Update control of movement type incorrect (entry 601 _ X Q L _ V) ". I analysed and found that I have wrongly filled the Requirement Type in the sales order and corresponding entry is missing in OMJJ.
1- I tried to add this entry but in vain. There is no 'New entry' or 'Copy as' button and hence i could not add..
2- So, I tried the other alternative i.e. reversing all the documents and changing the RqTy in order. But that can't be done since excise has been sent.
Is there any other way by which I can do the PGI or atleast capture the goods movement in the system and also update all the relevant documents?
Plz guide.
Thanks
SAPshedTo do the PGI / PGR , you have to cancel the Excise Invoice through J1IIN and then the Billing Document.Only after this , you can do the PGR or PGI.
Best Regards,
Ankur -
UPDATE CONTROL/WM MOVEMENT TYPES
In OMJJ transaction in the UPDATE CONTROL/WM MOVEMENT TYPES i observed that for every single movement type there are many entries available .can anybody tell me how one can identify which is used and at what point?
101 B A GR for asset - this will triger when you do the GR for asset against the PO
101 B E GR for sales order - this will triger when you do the GR for Sales order against the PO
101 B P GR for sales ord.st. - same as above but for project specifc
101 B V GR for acct. assgt.
101 F A GR for asset
101 F V GR for acct. assgt.
101 E B GR for sales ord.st.
101 E B E GR for sales ord.st.
101 E B P GR for sales ord.st.
101 E B X GR STO for salesOrSt
101 E B X E GR STO for salesOrSt
101 E B X P GR STO for salesOrSt
101 E F GR for sales ord.st.
101 E F E GR for sales ord.st.
101 E F P GR for sales ord.st.
101 Q B GR for project stock
101 Q B P GR for project stock
101 Q B X GR STO Project stock
101 Q B X P GR STO for project
101 Q F GR for project stock
101 Q F P GR for project stock
101 B A GR for asset
101 B V GR for acct. assgt.
101 B X GR stock in transit
101 B X A GR st.in trans:asset
101 B X V GR st.in tr:ac.assg.
101 F GR for order
101 F A GR for asset
101 F V GR for acct. assgt.
101 E B GR for sales ord.st.
Like wise every movement has diff indicator and diff activity.
by looking the config you can see for all the activity -
Movement type 122 Error while GI" Update control of movement type is incorr
Hai Gurus,
I am having an errow when doing a GI thru movement type 122. i am getting this error message " Update control of movement type is incorrect (entry 122 X X)" Can any one help me how to fix this.
I did this transaction using MIGO_GI and selecting Goods issued and other as the options with 122 as movement type.
warm regards.
mahesh.Hi
Mov type 122 is return to vendor if the qualtiy of Goods is Poor / Quality
Regatds
AKM -
DYNPRO_SEND_IN_BACKGROUND Dump due to Update Control Screen
Hi All,
I have a smartform which is being attached to a SO while creating from Idoc. Due to this smartform processing in update task, it is giving a update control screen and it is giving dump DYNPRO_SEND_IN_BACKGROUND.
My question: how to suppress this "Update Control" screen ? is there anything can be controlled from user status profile ?
Thanks,What is the type of user?
Can you try with Dialog user or System user? -
PO is created using Non-stock matreial and while doing good receipt of this PO user is getting error "Update control of movement type is incorrcet (entry 101 _ _ _ B). Message No. M7226.
Plesae help.....Hi,
check following link
[M7226 Update control of movement type is incorrect (entry 101 _ _ _ B);
[http://www.sapfans.com/forums/viewtopic.php?f=3&t=297261]
Regards
Kailas Ugale -
Update control of movement type incorrect (entry Z31 X X _ L )
Hi gurus,
Business reporting requirment to used M T 301, currently we using MT641 fr plant to plnt (stock in transit) transfer .
now we have to replace 641.
i)Kindly advice???
I have create Z31 copy of MT 301 but shown below error at PGI.
ii)Update control of movement type incorrect (entry Z31 X X _ L )
Error Message No E M7 226
how to remove this error?
thanks in advance.
sapsd25Hi G. LakshmipathiLaxmipati guru,
thanks for the prompt response.
T code VAL01n & VL02n is alreday.
Is their any MT similar to 301 use for stock transfer with DO & Excise
Thanks
SAPSD25 -
Update control of movement type is inco.
Hi All,
When user is Doing Good Receipts in Purchase orders & when it comes up he gets this message: (Update control of movement type is incorrect (entry 101 _ _ _ B)
Any help is appreciated.
Thanks & Regards,
S.SinighHi,
Please check the below thred .I think issue is with the OMS2
Update control of movement type is incorrect (entry 101 _ X _ B)
AMIT -
Update control error - BAPI_GOODSMVT_CREATE
Hi Folks,
while trying to post a GR using BAPI_GOODSMVT_CREATE, i am getting an error.
E M7 226 Update control of movement type is incorrect (entry 101 X X)
can someone let me know why and whts the solution to post the GR using this bapi.
thanks a ton
RajCheck this sample code for BAPI.
See if you are passing every informatino accordingly -
Sample Code for BAPI_GOODSMVT_CREATE
Populate header data
Posting date
x_goodsmvt_hdr-pstng_date = <deldate>.
Document date
x_goodsmvt_hdr-doc_date = <doc_date>.
User Name
x_goodsmvt_hdr-pr_uname = <ernam>.
User Name
x_goodsmvt_hdr-ref_doc_no = <PO/Delivery No).
Bill of lading
x_goodsmvt_hdr-bill_of_lading =<BOL>.
Populate item data
Purchase order number
i_goodsmvt_item-po_number = ebeln.
Line item number
i_goodsmvt_item-po_item = ebelp.
Plant
i_goodsmvt_item-plant = werks.
Movement type
i_goodsmvt_item-move_type =movtype.
Movement indicator
i_goodsmvt_item-mvt_ind = mvt_ind.
GR quantity
if p_movtype = c_101.
i_goodsmvt_item-entry_qnt = menge.
else.
i_goodsmvt_item-entry_qnt = menge * -1.
endif.
GR UOM
i_goodsmvt_item-entry_uom = meins.
Storage location
i_goodsmvt_item-stge_loc = lgort.
Production date
i_goodsmvt_item-prod_date = doc_date.
Delivery completion indicator
i_goodsmvt_item-no_more_gr = c_x.
Movement Reason
if p_movtype = c_122.
i_goodsmvt_item-move_reas = c_12.
endif.
endloop.
For each PO create a GR document
if not i_goodsmvt_item[] is initial.
call function 'TRANSACTION_BEGIN'
importing
transaction_id = l_trans_id.
call function 'BAPI_GOODSMVT_CREATE'
exporting
goodsmvt_header = x_goodsmvt_hdr
goodsmvt_code = x_mvt_code
importing
materialdocument = l_mat_doc
matdocumentyear = l_mat_doc_year
tables
goodsmvt_item = i_goodsmvt_item
return = i_bapireturn.
endif. -
Update Control message while processing VL10*
When processing VL10A or VL10B in 'Background' a random 'Update Control' message will break on the screen. Pressing F3 will Esc this 'break' and continue with the process. I am unable to determine why this error is breaking on the screen and which orders are not getting deliveries created. Has anyone come across this before? and how did you resolve/fix the error? I am unable to find a OSS Note on this.
Thank you JanelleDoes this message has a class and a number (e.g. V2 100)? If so, you could set up a watchpoint in debugger for it and see where it appears...
-
671 - movement type - Error update control
Hi,
I have created ew movement type Z71 with reference to 671 movement type for return sto delivery.
We have removed the movement type category 01 from Z71 mvt type, due to this we are not able to do the PGR for return sto deliveries.
While doing PRG system showing error: Update control of movement type is incorrect (entry Z71 X X _ L ).
We have removed that mot.type category for the purpose of updating the RG23D register in Depot, it has been suggested by SAP only. But i don't know the link b/w update control and movement type category.
Please let me know if these is any config for movement type control related.
Thanks&Regards
LakshmikanthHi All,
This is a bug in SAP
SAP has replied with Pilot note. They have given one pilot note to us.
We are going to implimenting in J1IG program for updating the RG23D register with reference to negative post goods issue(material document which is having 671 movement type).
The Pilot note number is 1300928. You can find more details in this note.
We will get back tou you after testing this note.
Regards
Lakshmikanth -
Update control report did not appear
Dear Experts/Gurus,
I am confusing after upgrade database version 2004A SP 00 PL 41 to SBO 2005A SP 01 PL 29, the update control report did not appear but when I upgrade database SBO 2004A SP 00 from PL 20 to PL 41, it appears after logon. Why could it be happened ? I appreciate your answer. TIA
Rgds,
Steve
"ratify kyoto protocol"Steve,
Not sure why that may happen. You may want to enter a message with SAP Technical Support on this issue as you may get a quicker response as this forum is for questions related to the Business One SDK.
Eddy -
CFGRID Selectmode=Row update control issue
I am running CF 9.0 Enterprise edition with the latest hotfixes with MS SQL Server 2000 DB; Windows 2003 R2SP2, IIS 6.0.
I'm having a very basic CFGRID issue that is eluding me and am hoping for some help.
I have a basic CFGRID with selectmode=Row, appendkey="Yes", and an href on a cfgridcolumn to allow for an update on the full record selected from the grid. Once the record has been updated, control passes from the cfm module that has the cfquery update back to the original cfgrid using a cflocation url. Once I select the same record again using the cfgrid, it appears as though the record has not been updated - until I refresh the browser. I'd like to be able to select the record from the grid a be presented with the updated record. I am assuming it is a timing issue.
Nothing on the grid has changed (because my query to load the grid doesn't select all of the values), so I don't think I need to refresh the grid. Any ideas on what I need to get the updated record? Like I stated before, this is a basic cfgrid, nothing fancy.
Any help or hints you can provide is greatly appreciated.
Libby H.I switched from HTML to Flash and used IE instead of Chrome and now it is working. I would still like to know if anyone else is seeing this issue?
Pete -
Update control terminated error
Hi
When I am doing PGI, system is not updating the posting status. It is still "Not yet started" and when I click on "document flow", system is giving a message as "Update control terminated".
Kindly let me know how to solve this issue.
One more request to Mr. LAKSHMIPATI and Mr.Ramanath Raja to give me their mobile number or mail id ,if permissible in the forum.Dear PP,
Instead of trying for nothing, I suggest to consult BASIS-Admin/ ABAPer for earliest resolution.
You may find, several threads, where such issues are discussed, few transactions were provided, still no silution. check with:
Re: ABAP run time error
update terminated
VK33
You may get the Transaction: SM13 or SM14; but its hard to analyse the error and work-upon them.
Let the Job-Expet, do their Job.
Best Regards,
Amit
Maybe you are looking for
-
Work Manager 6 - JCO Version out-of-support
Hi all, in the comments of JCO 2.1 Table Iterator (for-each-loop) I was made aware, that the JCO version 2.1.8 delivered with the current Work Manager 6.0 is not supported anymore by SAP. Michael Appleby asked me to start a discussion on this in orde
-
How to create game in flex3 to run from cd?
I want to create a game in flex3 (action script project). I have created game in flash 8 and flash cs3 to run from cd. But I dont know how create a game using as3 in flex 3 for cd. I am new in flex. can anyone guide me? I just need a guidance of what
-
Organization Determination not determined for CRM_IC
Our users are usually tied to multiple IC Profiles as they are tied to multiple organizations. We have an issue with the way the responsible group get auto-populated for IR. Lets assume we have a user Joe and he is assigned to organization A, B, C, D
-
Non-root user can't start Apache on port 443
Today I've been attempting to get SSL working for my Oracle Applications 11i (11.5.10.2) installation and I just hit a small problem. I've followed all of the Oracle literature I've come across, which instructed me to create a new (non-root) user to
-
Hi, Just a very quick question. I have a form and perform the following conditional display. Condition Type: PL/SQL Function Body Returning a Boolean Expression 1: declare l_return boolean; begin APP_PARMS.CHECK_LOAD('&DISPLAY_USER.',41,l_return); re