OMJJ - Where I diferentiate "Stock quality inspection" -  "Stock unrestricted use"?

Good morning, experts!
I need to know how to set up a move for the input material in quality stock, without having to use the QM or configure the material. We have the standard movement 503 that is received at the stock in quality inspection and the movement 501 that the entry into stock unrestricted use. In what field of transaction OMJJ I make this differentiation?
I appreciate your help.

Hi,
If one you use 501 the stock is sent to Quality inspection, then this could happen because you have checked the Post to Insp. stock indicator in the material master (Purchasinf view).
Post to Inspection Stock
Specifies whether the material is subject to quality inspection (without inspection lot processing) and whether a goods receipt is posted to inspection stock. The indicator is copied to purchase order items and goods receipt items as a default value.
Dependencies
You can select this indicator, if no stock-relevant inspection type has been selected in the inspection setup, and therefore no stock-relevant inspection lots can be created.
If you activate a stock-relevant inspection type, the entry in this field is deselected and can no longer be maintained. In this case, a corresponding indicator in the inspection type controls whether goods are posted to inspection stock.
When you use 501 the stock should be posted as unrestricted stock, then you can move the stock from Unrestrected to Quality Inspection stock using movement type 322 (use t-code MB1B).
With movement type 321 you can move from  Quality Inspection stock to Unrestricted.
Kind Regards,
Mariano

Similar Messages

  • Batch from quality inspection to unrestricted use.

    Hi everybody
    Someone can help me with the following problem?
    I made a good receipt for order with a movement type 101. We are using the QM module, then with the movement type 101 an inspection lot is generated, consequently the amount entered is place in quality inspection. For any reason the inspection lot was not generated or this was canceled. My problem is that, now the amount entered is in quality inspection and there is not a lot inspection to move the amount from quality inspection to unrestricted use.
    I tried use a movement type 102 (transaction MB31) but the system send the message that the movement must be done only with QM transaction. The same message was sent when I tried to cancel the material document (MBST).
    Someone know how I can create an inspection lot or how I can move the amount from quality inspection to unrestricted use?
    Thanks in advance.

    hi carlos
    if you create an inspection lot manually you cannot able to post the stock ( since a manual inpsection lot is not stock relevant) better thing is try to figure out why inspection lot is not genereated and solve it
    i think if the inspection lot is not generated it will show some message during MIGO itself.try to find the inspection lot using QA32 and specify the material and select Select all inspection lot
    regards
    thyagarajan

  • MBBE-"Quality. inspection" stock shows Inspection lot as "Unrestricted"

    Dear All,
    In MMBE, a material is available in "Quality Inspection" stock.
    We checked in "QA32". There we can see, it is in "Unrestricted use".
    How to move the stock from "Quality Inspection" to "Unrestricted use".
    Any suggestions.
    Regards,
    Mullairaja

    create a inspection lot manually for the qunatitiy that is still in Q-status and do a usage decision

  • How to use quality inspection stock

    Hi,
    Plz tell me How to use quality inspection stock.can i use quality inspection stock for any transaction directly.
    Now i have 100 quality inspection stock is there.but i am not taking these stock to unrestricted use stock.i want use these stock to all transaction like 301,303,309.......
    it is possible or not

    hi
    Use t-code MB1B to transfer stock from quality inspection - unrestricted-use stock
    Movement Type 321 Transfer posting stock in quality inspection - unrestricted-use stock
    The quantity is transferred from stock in quality inspection into unrestricted-use stock. Here you can post the quantity to another storage location.
    You cannot use this movement type for QM-managed materials since transfer posting for these materials takes place via the usage decision.
    Possible special stock indicators: E, K, O, Q
    u2022 K Goods receipt for purchase order to consignment stock
    u2022 O Goods receipt for purchase order to stock of material provided to vendor
    u2022 E GR for purchase order or order to sales order stock
    u2022 Q GR for purchase order or order to project stock.
    regards
    Vishal

  • Moving the stock to inspection to unrestricted

    hi,
      i completed the flow from gr to destination bin flow but the stock remains in quality inspection not in unrestricted use. how to  move the stock from quality inspection to unrestricted use.(without changing the bin number)
    Regards
    muthuraman

    Hi Muthuraman,
    You want to transfer the stock from quality to unrestricted. you may follow the below process:
    1, do transfer posting of the material from Quality to unrestricted in MB1B with 321 .
      it will generate the posting change no.
    2. create a Transfer order in LT06 with respect to the above material document no.
    it will put the stock in interiam storage type 922.
    3. confirm the TO.
    hope this will help.
    regards,
    Anubhab

  • Problem in BAPI for stock posting from quality inspection  to unrestricted usage

    Hi all,
    I am using BAPI_GOODSMVT_CREATE for  stock posting from quality inspection  to unrestricted usage Stock against quality inspection lot(not by MB1B) using mvt type 321.The material doc gets created by the BAPI,but actual stock posting is not taking place ie.the stock doesn’t get reflected in QA33/32 and QA11 also .Can any one suggest what must be wrong?The inputs given are as follows:
    GOODSMVT_HEADER:
    PSTNG_DATE =30/07/2014, DOC_DATE = 30/07/2014, REF_DOC_NO = INSP LOT NO.
    GOODSMVT_CODE:
    GM_CODE:  ‘04’ .
    GOODSMVT_ITEM:
    MATERIAL = MATERIAL NO
    PLANT = PLANTCODE
    STGE_LOC = ‘WIP’
    BATCH = BATCHNO
    MOVE_TYPE   = ‘321’
    ENTRY_QNT = 100
    ENTRY_UOM =  ‘EA’
    ORDERID =  Prd ord no.
    After executing this I used BAPI_TRANSACTION_COMMIT also. I am able to see the posted qty in MMBE,but it is not reflecting in QA11/33/32.
    Kindly help me.

    Hi Naveen,
    Thanks for the reply. Even after using FM QAVE_PROCESS_AUTO_UD,when i execute
    BAPI_GOODSMVT_CREATE, the same thing is happening.I am unable to see the stock deducted in QA33.
    Is there any input in the goods mvt bapi where we can provide inspection lot no since i believe that the goods mvt has to get connected with the inspection lot.

  • Change stock from unresticted stock to quality inspection stock

    Hi,
         I have a material with Qualtiy View.we have done G.R. & also made UD & now my material lying in unresticted Stock.but now i want to cancle the G.R..
    What is the procedure to change stock from unresticted stock to quality inspection stock through quality module.
    Regards
    Pavan

    Hi
    user Exit QEVA0008  in SMOD you can check the documentation.
    Module for Editing Customer Function Code
    This user exit allows you to activate a function key in the menu for the
    usage decision.
    You can freely define the description and function associated with this
    function key (+FC1).
    You can use this feature, for example, to revoke (reset) the usage
    decision.
    Refer to the documentation for function module EXIT_SAPMQEVA_008.
    Functionality
    This function module is called if the freely defined function (+FC1) in the menu for the usage decision transactions is called up. A prerequisite for this is the activation of the user exit QEVA0008.
    Example
    Using this function module, you can reset the usage decision in transactions QA12 ("Change usage decision with history") and QA14 ("Change usage decision without history").
    Include LXQEVF10 contains sample coding for resetting the usage decision.
    Notes
    Business transaction QM68 is available for this function in the standard system. You can display a where-used list for this transaction in transaction BS33 (Display transactions).
    If business transaction QM68 was carried out successfully, the system sets the inspection lot status "UDRE" - usage decision reset (system status I0297). You can display a where-used list for this status in transaction BS23 (Display system statuses).
    If you want to use the function to reset the usage decision, be sure to consider the following points:
    If a vendor is released (status profile in the quality info record), an update is carried out only once; this means that if the usage decision is reset, the status in the supply relationship is not corrected.
    If you make the usage decision again, the inspection results will also be transferred to the batch classification.
    The quality level is updated only once (when you make the initial usage decision). If the usage decision is changed, the quality level is not updated.
    Regards
    Sujit

  • Automatic batch determination for quality inspection stock

    Hello, gurus.
    Could you please, help me with the following problem: I have received on the certain storage location some quantity of material maintained in batches into quality inspection stock with 501 movement type. Now I would like to make reverse posting, but I do not want to use cancellation of the document, I need to use 502 movement type and determine batch from quality inspection stock with automatic batch determination in MIGO transaction. I assigned Batch search procedure to 502 movement type and created all necessary condition records. I use Checking Group for Availability Check ‘CH’ and Checking Rule for Availability Check ‘03’ where I include quality inspection stock. However no batch can be determined. But if I use 331 movement type, everything is OK, the batch is determined without any problems. If I manually put batch and valuation type for the material, the system shows no error.
    Why it is not possible to do automatic batch determination for quality inspection stock then?

    OK, let us talk abou it. I check it in my system, actually 502 can work, but I can't trigger BM determination by 501. Maybe BM determination onlys to select some existing batches for consumption. For 501 in my pratice I can select all the existing batches to be added or just add a new batch.

  • FG material in Prod Ord once 101, goes to Quality Inspection Stocks

    Hello,
    I would like to ask, why does one of our Finished Goods in our production order once confirmation 101 was done to it, the stock went to the Quality Inspection Stocks? We have check its material master data Quality Management Tab and below are what we see on it:
    in the Procurement Data Section:
    QM proc. active was TICK
    QM Control Key = 0000 (No active functions, info message)
    in the General Data Section:
    Inspection Setup was not TICK (no inspection set-up was maintain for the finished goods)
    That is why we wonder why it still been cue to QI stock once 101 was done? how could we check this and where else does this things occuring? please guide and help us to resolve the problem of ours.
    Thanks

    Hi,
    Is this inhouse produced or the Extenally procured material.
    in case externally produced material check the Qinfo record for the same also.
    reg
    satheesh

  • Quality inspection stock

    Hi experts ,
    Whenever a material is procured from a particular vendor then at the time of posting goods receipt that material by default to be posted in Quality inspection stock alone not in Unrestricted use stock,i.e. posting in unrestricted use stock should not be allowed at all . If the vendor going to differ means then it can be posted in Unrestricted us stock .
    Kindly help me how to do this.
    - Neo

    Hello Neo,
    There are two options in this case,
    1. If using QM module, then as suggested by Srinivas, you need to maintain QM info record for the vendor which are subject to Quality material.
    2. If you are no using QM module then you need to flag mark "Post to Inspection Stock" check box in purchasing view of material master. But in this case, the material will be posted as QI stock for all the vendor, however you can change it during PO and GR.
    Hope this helps.
    Regards
    Arif Mansuri

  • SD delivery goods issue of Quality inspection stock

    Hello, anyone know whether SAP allow goods issue of quality inspection stock?
    If stanrdard customizing not possible, any user exit ?

    Hi
    No sap not allows GI for QI stock
    Beacuse Once Stock in QI without inspection we can't issue goods
    Hope ths helps
    Please reward points
    Sunil

  • Delivery  is accepting material in Blocked & quality inspection stock

    Hi Experts,
    During delivery ( VL01N) the system asks for Serial Nos for the delivered Material and serial Nos are assigned by going to Extras--> serial Nos. and PGI is completed
    In this process the system could able to take the serial Nos that are in Blocked (07)or Quality (02) state also apart from the Unrestricted Use.
    How can we restrict the system to prevent selecting the stock/material apart apart from 01 state ( i.e unrestricted use)
    Regds
    Rajiv

    You have customize that availability check which runs behind delivery to check what are the stock available.
    You have to make sure u unchecked the quality inspection stock and blocked stock
    thanks

  • Unrestrected use stock to quality inspection stock

    Hi,
    plz tell me how can transfer Unrestrected use stock to quality inspection stock for same material and same palnt

    Hi Prasad, Make sure that inspection type 08 is assigned and activated in Material Master's QM view. Then you would be able to move the stock from unrestricted to quality using MB1B (Mvt/Type 322).
    Also check : Stock Reversal - From Unrestricted to Quality
    Edited by: m_n_novice on Sep 5, 2009 2:02 PM

  • Sto stock to Quality Inspection stock

    Hi,
    I want Sto stock to Quality Inspection stock.Then i want Quality Inspection stock to production purpes
    I want return stock to Quality Inspection stock.then Quality Inspection stock to normal stock

    HI,
    For the material to go into quality stk,in the puchasing view of material master for the receiving plant tick the post to inspection  stk & save.
    Then do the STO the material will come automatically into quality stk.
    Even if u dont tick in material master still u can receive the matl in QI stk when doing migo by selcting the QI stk.
    After receiving the matl u can move it by using tcode MB1B & mvmt type321 to Unrestricted use.
    IN SAP only the unrestricted can be issued to production.
    Edited by: Murugan mgl on Aug 13, 2009 8:15 AM
    Edited by: Murugan mgl on Aug 13, 2009 8:16 AM

  • Stock provided to vendor Quality inspection Stock

    Hi
    can any expert  please Explain what is use of subcontractor inspection stock ,how the movement takes place between Stock provided to vendor unrestricted use & Stock provided to vendor Quality inspection if Iwanted to move between this two location how can i activate the QM ?

    Hi,
    I think you can not move the inspection stock in your plant to inspection stock provided to vendor.
    Regards,
    Prashant

Maybe you are looking for

  • Passing #COLUMN_VALUE# as parameter to pl/sql function in column template

    Hi all, I want to color negative amounts in red in sql report using column template. I created a pl/sql function"isNegativeNum" which returns 1 or -1. create or replace function isNegativeNum(p_column_value varchar2) return number as l_dummy number;

  • Problem in mapping xml data with imported RFC parameters

    I am currently working on a senario in which a flat file is generated by an RFID server and placed in FTP server. The flat file is picked up from the FTP server using XI and the contents are mapped to the corresponding imported RFC parameters. The co

  • Why jdb can't display the line number?

    Hi, I use jdb to debug HelloWorld.java run on cldc_hi. Where cldc_hi is build ENABLE_JAVA_DEBUGGER=true I compile HelloWorld.java with -g And use the same java version when compile and launch In jdb I input stop in HelloWorld.main run step ... jdb sh

  • Is there a way to set default PDF options/presets in Illustrator CS5?

    I do a lot of design and have a custom preset created for saving my .ai files to .pdf. It's not a big deal but it's a little tedious switching from the default adobe PDF preset to my custom preset every time I save as to a PDF (Besides the ocassional

  • How do I open a iMovie 2.0 file in iMovie HD? Does it convert?

    How do I open a iMovie 2.0 file in iMovie HD? Does it convert? I have a movie from iMovie vers. 2.0.1. I want to open it on our new Mac Mini which uses iMovie HD 5.0.2. Please tell me this is doable. Or can I get a copy of iMovie 2.0 to run it on my