OMNIPORTLET:where the options of the column dropbox (layout tab) come from?
In the layout tab of the omniportlet I work on, there are several options in the column dropbox.
I would like to add some new ones. But I cannot figure out where the omniportlet gets the options from.
PS: my data source is "content", if this can help
Thanks a lot in advance
Hi Faisal,
IN APPROVER SCREEN:
The values in the system drop down is getting poulation using the method : INIT_SYSTEMS in COMPONENT CONTROLLER of webdynpro component GRAC_UIBB_ACCREQ_APPROVAL .
IN REQUESTOR SCREEN:
Refer to method INIT_SYSTEMS( ) in COMPONENT CONTROLLER of webdynpro component GRAC_UIBB_RISK_VIOLATION.
Hope this will help you.And take the help of ABAP'er who can help you with debugging "why system's are not getting populated except ALL ".
Thanks
KH
Similar Messages
-
Where the value of systimestamp/sysdate comes from and dbms_scheduler
I saw bunch of other posts but I could find the post that exactly explaining about where the value returned as systimestamp/sysdate comes from or impacted or I’m missing something and need some help.
Here is my situation
I have an access to this db (let me call db A) and when I access it, I get following result. I don’t have full access to this db so I cannot experiment a lot here.
SYSTIMESTAMP CURRENT_TIMESTAMP LOCALTIMESTAMP DBTIMEZONE SESSIONTIMEZONE
27-MAR-13 02.31.55.041411 AM +00:00 26-MAR-13 07.31.55.041416 PM -07:00 26-MAR-13 07.31.55.041416 PM +00:00 -07:00
I’m in PST timezone.
I have my db which I have full access as well as its host.
I can make result like db A on my db if I started up db and its listener while TZ environment variable equal to UTC.
Now I saw in other post that someone was trying to retrieve systimestamp value in a job executed via dbms_scheduler.run_job.
So I did that in two ways. 1 with use_current_session = true and 2 is false for the same.
On my db, results are the same (both returns time in UTC) but on db A, I got UTC time when use_current_session = true and PST when use_current_session = false.
So questions are:
What could be the difference in setup between my db and db A?
Is there a query, logfile, or anything I should check to find out what can be the difference?
Any clue about where to check will be appreciated as well and please let me know if there is some additional information necessary to provide me some help on this.
I tried to find the cause with my db and I could see the same result as db A which is to see UTC time if use_current_session = true and PST time if use_current_session = false by bringing up the db listener after I set TZ environment variable equal to PST8PDT. However this causes systimestamp from sqlplus session become also a PST time.
The reason I’m playing around with the setup and checking systimestamp value is because we are facing the situation where everywhere except pl/sql job submitted by enterprise scheduler service is pointing wrong timezone (PST instead of UTC) and I’ve been searching the solution or clue for where to look at.Hi Stephen,
I think your first thought about using a javascript timer, call an APEX application process to get the new value and finally set it in the page 0 item would be the way I would take. :)
+"Also, the message shown may vary depending on who is logged in, i.e. the user session. More than user is logged-in at the same time."+
In case you use an application process this shouldn't be any problem.
Some useful links: [Carl Backstrom's example|http://apex.oracle.com/pls/otn/f?p=11933:11]
[My example application includes similar ways of using js and application processes|http://apex.oracle.com/pls/otn/f?p=65555:1]
Best regards,
Tobias
[http://apex-at-work.blogspot.com/|http://apex-at-work.blogspot.com/] -
Where does the Calendar and Home Calendar come from ?
I have two iPhones, two iPads and a Mac that share one Apple id. Where do the Calendar and Home Calendar come from?
Siretman wrote:
I have two iPhones, two iPads and a Mac that share one Apple id. Where do the Calendar and Home Calendar come from?
Are you asking which calender takes president? -
Where does the JeelyBeans look and feel come from?
Where does the JellyBeans Swing look & feel come from that is used in
Workshop UI?
-NickNick -- Thanks for the kind words.
While we don't have plans to make the look and feel available outside of the IDE,
you may want to check out some of the other look and feel resources within the
Java community such as
www.javootoo.com
or
http://directory.google.com/Top/Computers/Programming/Languages/Java/Class_Libraries/Graphics/User_Interface_Classes/Look_and_Feels/?tc=1
We did use JDK 1.4 for Workshop and were very pleased with its performance and
other aspects.
- Pete Horadan
Workshop Dev Mgr.
"Nick Minutello" <[email protected]> wrote:
I think it would be excellent if BEA made the JellyBeans look and feel
freely available - even getting it added to the Sun JDK.
There is a distinct interest in developing C# clients purely due to the
fact
that Swing doesnt perform and doesnt look good. JDK1.4 reportedly has
numerous performance improvents. What is missing is a good look and feel.
The Jelly Beans look and feel is quite good (I suspect that it is no
accident that its flat look is similar to Visual Studion .NET.).
I think that encouraging developers to remain with Java for GUI clients
can
only be good for Java and in turn J2EE as a whole. A pure java environment
would be much better than a deliberatly mixed environment. Java RMI is
much
simpler than SOAP, etc.
Aside from the ultruistic viewpoint, we would dearly like to use it in
our
Swing applications - perhaps we can stave off a turn to C# / .net clients.
Regards,
Nick
"Carl Sjogreen" <[email protected]> wrote in message
news:[email protected]...
At this point we don't have plans to license the look and feel of the
application (the swing components) separately, but I'd love to hearmore
about what you had in mind.
-Carl
"Nick Minutello" <[email protected]>
wrote
in message news:[email protected]...
I am really interested in the answer to this question... please
=+=+=+=
Does BEA have any intentions of making the look & feel commercially
or
freely
available? (esp for existing, but potentially growing customers ;-)
-Nick
=+=+=+=
-Nick
"Ian M. Goldstein" <[email protected]> wrote in message
news:[email protected]...
It's homegrown. (There is no pluggable look-and-feel at this time.)
Ian M. Goldstein
Developer Relations Engineer
BEA Systems, Inc.
"Nick Minutello" <[email protected]>
wrote
in message news:[email protected]...
Where does the JellyBeans Swing look & feel come from that is
used
in
Workshop UI?
-Nick -
I've got a iPod classic 80g I've got loads of pictures on there and I want to get them off. I've tried something where the files I get off come up as thumbnails which I can't open. Is there any way of getting them off and viewing them as a normal photo?
Oh no... NOT THE 99-PAGER!!! Anything but THAT!!!
-
Where did the iPhoto 10 iCloud Photostream come from and how do I get rid of it?
I just updated my MacBook Air to mavericks. I have an iPad and iphone as well just updated to ios7. My Mac updated iPhoto as well. Now when I opened iPhoto I got my flickr and Facebook integrated folders in the left pane plus an iCloud photostream.
I didn't have that before and it has 287 pictures pulled from many devices but I didn't set that up. I only had/have a private photostream with a particular name and about 10 pics in it. this new one is just called iCloud photostream and it has 287 pics of which some I know I took with my iPad and others with my iphone. I of course sync both devices with my Mac so this pics are in my iPhoto library as well.
Where did the iPhoto 10 iCloud Photostream come from and how do I get rid of it?In the iPhoto preferences turn PhotoStream off
LN -
Pick the record where the column occurs most.
Hi, Can you please help me in this regard.
From the source data, I need to pick the Material_code and Material_Name where the Material_Name occurs most frequently for a Material_code
Source data:
Material_code Material_Name
1234 ABC
1234 ABC
1234 ABC
1234 CDE
1234 CDE
2345 DEF
2345 DEF
2345 KLM
3456 TIO
3456 TIO
3456 TIO
3456 PLM
3456 PLM
Output
Material_code Material_Name
1234 ABC
2345 DEF
3456 TIO
Appreciate your help in advance..
Thanks,
RobertFrank Kulash wrote:
But sometime you get what you pay for.There is one more difference - NULLS. STATS_MODE is aggregate function and therefore ignores NULLs. I understand material name most likely is NOT NULL, but to illustrate:
WITH x AS (
SELECT 1234 material_code, 'ABC' material_name FROM DUAL UNION ALL
SELECT 1234 material_code, 'ABC' material_name FROM DUAL UNION ALL
SELECT 1234 material_code, 'ABC' material_name FROM DUAL UNION ALL
SELECT 1234 material_code, 'CDE' material_name FROM DUAL UNION ALL
SELECT 1234 material_code, 'CDE' material_name FROM DUAL UNION ALL
SELECT 2345 material_code, 'DEF' material_name FROM DUAL UNION ALL
SELECT 2345 material_code, 'DEF' material_name FROM DUAL UNION ALL
SELECT 2345 material_code, 'KLM' material_name FROM DUAL UNION ALL
SELECT 3456 material_code, 'TIO' material_name FROM DUAL UNION ALL
SELECT 3456 material_code, 'TIO' material_name FROM DUAL UNION ALL
SELECT 3456 material_code, 'TIO' material_name FROM DUAL UNION ALL
SELECT 3456 material_code, 'PLM' material_name FROM DUAL UNION ALL
SELECT 3456 material_code, 'PLM' material_name FROM DUAL UNION ALL
SELECT 3456 material_code, NULL material_name FROM DUAL UNION ALL
SELECT 3456 material_code, NULL material_name FROM DUAL UNION ALL
SELECT 3456 material_code, NULL material_name FROM DUAL UNION ALL
SELECT 3456 material_code, NULL material_name FROM DUAL
t as (
select material_code,
material_name,
row_number() over(partition by material_code order by count(*) desc) rn
from x
group by material_code,
material_name
select material_code,
material_name
from t
where rn = 1
MATERIAL_CODE MAT
1234 ABC
2345 DEF
3456While:
WITH x AS (
SELECT 1234 material_code, 'ABC' material_name FROM DUAL UNION ALL
SELECT 1234 material_code, 'ABC' material_name FROM DUAL UNION ALL
SELECT 1234 material_code, 'ABC' material_name FROM DUAL UNION ALL
SELECT 1234 material_code, 'CDE' material_name FROM DUAL UNION ALL
SELECT 1234 material_code, 'CDE' material_name FROM DUAL UNION ALL
SELECT 2345 material_code, 'DEF' material_name FROM DUAL UNION ALL
SELECT 2345 material_code, 'DEF' material_name FROM DUAL UNION ALL
SELECT 2345 material_code, 'KLM' material_name FROM DUAL UNION ALL
SELECT 3456 material_code, 'TIO' material_name FROM DUAL UNION ALL
SELECT 3456 material_code, 'TIO' material_name FROM DUAL UNION ALL
SELECT 3456 material_code, 'TIO' material_name FROM DUAL UNION ALL
SELECT 3456 material_code, 'PLM' material_name FROM DUAL UNION ALL
SELECT 3456 material_code, 'PLM' material_name FROM DUAL UNION ALL
SELECT 3456 material_code, NULL material_name FROM DUAL UNION ALL
SELECT 3456 material_code, NULL material_name FROM DUAL UNION ALL
SELECT 3456 material_code, NULL material_name FROM DUAL UNION ALL
SELECT 3456 material_code, NULL material_name FROM DUAL
SELECT material_code
, STATS_MODE (material_name) AS most_common_name
FROM x
GROUP BY material_code
MATERIAL_CODE MOS
1234 ABC
2345 DEF
3456 TIOSY. -
Reg:How to delete the column in table control also from database table.
Hi Experts,
Once again thank u all for giving the responses.
one more doubt is how to delete the columns of table control and also the record shold delete from ztable.
With Regards,
Saroja.P.Hi,
If you want to delete the rows in the table control and simultaneously delete it from the database table, then you can implement a 'DELETE' functionality specific to your table control. Have a MARK field (you will find that in the screen attributes of the table control -> give a name for the MARK field, you will find an additional MARK column at the beginning of your table control). You can check whatever rows you want to delete from the table control, call the delete module.
"This portion of code inside the LOOP...ENDLOOP.
IF sy-ucomm eq 'F_DELETE'.
gt_itab2-check = mark. " Store the MARK field status into your internal table's correspoding field 'check'
MODIFY gt_itab INDEX tabcontrol-current_line.
ENDIF.
iF sy-ucomm eq 'DELETE1'.
DELETE gt_itab WHERE check eq 'X'. "Your internal table does not have rows that you want to delete
ENDIF.
Now you can modify your database table using the MODIFY statement.
MODIFY ZDB FROM TABLE gt_itab. -
How to change the column value which is coming from DO by a calculated field?
Hi all,
I want to change a column value based on my calculated field value. I have a column which is coming from DO which is based on External Data Source. I have a calculated field in my report. When there is any change in the calculated field then the column which is coming from DO needs to be changed. It means the DO needs to get updated when there is a change in the calculated field. Or like if the calculated field meets some condition then I need to change/update the same in the DO. This has to be done on the fly. the report should not submitted for this. when there is a change in the calculated column the DO column needs to get updated.
Thanks,
Venky.Ok, I've been a customer for very many years, I'm on a fixed retirement
income. I need to reduce my bills, my contract ends in Dec. I will be
pursuing other options unless I can get some concessions from Verizon. My
future son-in-law was given this loyalty plan, so I know this is a
reasonable request. My phone number is (removed) acct number
(removed)
>> Personal information removed to comply with the Verizon Wireless Terms of Service <<
Edited by: Verizon Moderator -
Hi. How do I attach more than one document to an email originating from my iPad, especially if the documents come from different apps? When starting an email there's no option for attachments, unless you send the document from inside an app like iBook and then you can only send one at a time.
How to add, send and open iPad email attachments
http://www.iskysoft.com/apple-ipad/ipad-email-attachments.html
Cheers, Tom -
How to read the column name of a table from sap system using C#?
Hi!!
I am using SAP .NET connector and creating a windows application.
Now I wanna read the column name when a table name is given....
Connection is done, but I don't know the code to read the column names alone...
Can anyone help me with the code??fine!!
So if i give the table name, which the RFC_READ_TABLE function module have, will it run properly? or i wanna change all the codes in order to support RFC_READ_TABLE function module?
Because from the beginning I was using BAPI_CUSTOMER_GETLIST function, but my client requirement is to use ERP function module RFC_READ_TABLE, he didn't give any table name also..
This is my code: What I have to change in this???
ECCDestinationConfig ECCDestination = new ECCDestinationConfig();
RfcDestinationManager.RegisterDestinationConfiguration(ECCDestination);
RfcDestination rfcDest = null;
rfcDest = RfcDestinationManager.GetDestination(a);
RfcRepository repo = rfcDest.Repository;
IRfcFunction customerList = repo.CreateFunction("BAPI_CUSTOMER_GETLIST");
IRfcTable addressData = customerList.GetTable("AddressTable"));
int j = addressData.Metadata.LineType.FieldCount;
for (int i = 0; i < j; i++)
RfcElementMetadata metadata = addressData.GetElementMetadata(i);
listallcolumn.Items.Add(metadata.Name);
Message was edited by: Jeswin Rebil -
Wheres the old network documentation when installing from 2010 source?
wheres the old network style wiki resources for users who install from a 2010 source? Im installing from a 2010.05 core, and it uses the old network config in rc.conf.
example
#rc.conf
INTERFACES=(eth0)
eth0="dhcp"
gateway="default gw 192.168.1.254"
ROUTES=(!gateway)
#resolv.conf
nameserver=8.8.8.8
nameserver=8.8.4.4
i can ping my gateway and lan members, but i cant ping 8.8.8.8, so that makes sense why i cant ping google.com
am i just not adresing all the conf files, or is this a gateway issue? also, i couldnt get dhcp to work. I set it that way first, it wouldnt not grab an ip. Then once i set it static, and then back to dhcp, it reverts to the static ip either way.
[we really need a resource that shows up on a google search of "arch ROUTES(", or "arch ROUTES(!gateway)", or "arch INTERFACES=" because if users only have access to an older install source (i left my newer source at work, doh), we want them to be up and running, and updated right away]
Last edited by wolfdogg (2012-03-10 22:11:16)wolfdogg wrote:[we really need a resource that shows up on a google search of "arch ROUTES(", or "arch ROUTES(!gateway)", or "arch INTERFACES=" because if users only have access to an older install source (i left my newer source at work, doh), we want them to be up and running, and updated right away]
Patches welcome :-)
https://wiki.archlinux.org/index.php?ti … did=111704 - it's not pretty, but you can look at the code:
==Networking==
* {{Codeline|[[HOSTNAME]]}}: Set this to the hostname of the machine, without the domain part. This is totally your choice, as long as you stick to letters, digits and a few common special characters like the dash. Don't be too creative here, though, and when in doubt, use the default.
* {{Codeline|INTERFACES}}: Here you define the settings for your networking interfaces. The default lines and the included comments explain the setup well enough. If you do not use DHCP to configure a device, just keep in mind that the value of the variable (whose name must be equal to the name of the device which is supposed to be configured) equals the line which would be appended to the {{Codeline|ifconfig}} command if you were to configure the device manually in the shell.
* {{Codeline|ROUTES}}: You can define your own static network routes with arbitrary names here. Look at the example for a default gateway to get the idea. Basically the quoted part is identical to what you'd pass to a manual route add command, therefore reading man route is recommended if you don't know what to write here, or simply leave this alone.
* {{Codeline|NETWORKS}}: This enables certain [[network profiles]] at boot-up. Network profiles provide a convenient way of managing multiple network configurations, and are intended to replace the standard {{Codeline|INTERFACES}}/{{Codeline|ROUTES}} setup that is still recommended for systems with only one network configuration. If your computer will be connecting to various networks at various times (e.g., a laptop) then you can configure profiles in the {{Filename|/etc/network.d}} directory. There are template files included in {{Filename|/etc/network.d/examples}} that can be used to create new profiles.
Remember to read all the news back to mid-2010: http://www.archlinux.org/news/ -
Where does the «On my Mac» mailbox come from ?
Hi ... In the my Mail's Trash mailbox in the sidebar, recently a sub mailbox called «Sur mon Mac (On my Mac)» mailbox (see here) was created. Where does it come from and what is it's purpose?
If you add/import your own mailboxes (I have a lot of them because I like to be organized), the system will automatically add a separate trash can for anything you may delete from one of those because the system treats those separately and, by default, assigns them to "on my Mac". If you delete anything from one of your own folders (not the system default mailboxes), it will wind up in the On My Mac trashcan.
Any mailbox under my heading of IMPORT is considered "on my mac". -
Where all the redo/archive log volume come from?
Hi,
I have a database with a size of around 50G. Thats not very much, but the crazy thing is that this database has a redo log volume per day that is nearly equal the size of the database:
-- Daily View
SQL> SELECT TRUNC(completion_time) AS time, ROUND(SUM(blocks * block_size)/1024/1024,2) AS size_mb, ROUND(SUM(blocks * block_size)/1024/1024/1024,2) AS size_gb FROM v$archived_log GROUP BY TRUNC(completion_time) ORDER BY 1 DESC;
TIME SIZE_MB SIZE_GB
2013-02-03 49599.7 48.44
2013-02-02 50104.63 48.93
2013-02-01 54466.36 53.19
2013-01-31 52935.41 51.69
2013-01-30 51596.85 50.39
-- Hourly View
SQL> SELECT TRUNC(completion_time,'HH24') AS time, ROUND(SUM(blocks * block_size)/1024/1024,2) AS size_mb, ROUND(SUM(blocks * block_size)/1024/1024/1024,2) AS size_gb FROM v$archived_log GROUP BY TRUNC(completion_time,'HH24') ORDER BY 1 DESC;
TIME SIZE_MB SIZE_GB
2013-02-03 23 160.68 .16
2013-02-03 22 163.73 .16
2013-02-03 21 195.65 .19
2013-02-03 20 4492.44 4.39
2013-02-03 19 176.3 .17
2013-02-03 18 4259.8 4.16
2013-02-03 17 226.99 .22
2013-02-03 16 5465.64 5.34
2013-02-03 15 166.47 .16
2013-02-03 14 165.05 .16
2013-02-03 13 253.33 .25
2013-02-03 12 9568.93 9.34
2013-02-03 11 391.14 .38
2013-02-03 10 9585.36 9.36
2013-02-03 09 160.02 .16
2013-02-03 08 200.1 .2
2013-02-03 07 166.66 .16
2013-02-03 06 267.45 .26
2013-02-03 05 309.26 .3
2013-02-03 04 1486.87 1.45
2013-02-03 03 11106.77 10.85
2013-02-03 02 318.1 .31
2013-02-03 01 147.47 .14
2013-02-03 00 165.47 .16
2013-02-02 23 160.17 .16
2013-02-02 22 159.25 .16
2013-02-02 21 205.9 .2
2013-02-02 20 4473.27 4.37
2013-02-02 19 124.64 .12
2013-02-02 18 4364.69 4.26
2013-02-02 17 295.02 .29
2013-02-02 16 5415.06 5.29
2013-02-02 15 166.22 .16
2013-02-02 14 166.83 .16
2013-02-02 13 84.62 .08
2013-02-02 12 9905.55 9.67
2013-02-02 11 418.31 .41
2013-02-02 10 9548.78 9.32
2013-02-02 09 166.51 .16
2013-02-02 08 204.88 .2
2013-02-02 07 167.37 .16I know that every database change produces redo, but why that much?
Is there a way to investigate further where all the redo information comes from?
Every 2 hours redo is backed up to tape.
There are no significant batches, shaking and shuffling the data around all the time.
Nearly all changes in this database is happening through user inputs.
Database is 11gR2 on Redhat 5.6.
Thanks
941743
Edited by: 941743 on 04.02.2013 15:32
Edited by: 941743 on 04.02.2013 15:33I am afraid there is no easy and direct way to pull the answer from the data dictionary.
But with some work, you can get to the bottom of this.
This query shows you how much redo is used by the sessions in your system currently:
select a.sid , a.value from v$sesstat a, v$statname b
where a.statistic# = b.statistic#
and b.name = 'redo size'Unfortunately, I am not aware of a AWR view (license required!) that corresponds to v$sesstat, so it would not be easy to look back and see which session generated the redo.
One way is to troubleshoot the problem online, using a utility such as snapper- http://blog.tanelpoder.com/2010/03/22/oracle-session-snapper-v3-10/ . See which sessions generate most redo and see what SQL they are running at that time.
The other way is to create your own “repository”. Sample V$SESSION, v$sesstat , v$statname and possibly V$SQL frequently (every few seconds) and record how much redo and what SQLs are running by each session. Once you gather enough data, look which sessions had the biggest “redo size” delta and what SQL were they running at that time.
Iordan Iotzov
http://iiotzov.wordpress.com/ -
How to find out which data control do the page layout components come from?
hi,
work in Jdev 11.1.2.3
After have drag and drop data control into pages designer, how to find out which data control do the page layout component (such as a field in form layout) come from?
--i cannot find data control related information in the property pallete for the page layout component.
Regards.This information can be found in the page definition file.
Select the field in the page and then click the binding tab.
Maybe you are looking for
-
After upgrading to iOS 8.3, the keyboard has frozen and I can not longer text or access my contacts. I literally just upgraded to an iPhone 6, but I'm just about ready to can this phone and go with an Android. Can anyone help or have the same iss
-
OS X disk has no more space for available application memory. How do I erase to make space?
I can not get the pop up force quit to stop coming up.
-
<mx:DataGrid id="dg_profile_groups" dataProvider="{first}" width="940" color="#000000"alternatingItemColors=" [#FFFFFF,#A9A9A9]" verticalScrollPolicy="on" itemClick="item_click(event)"> <mx:columns> <mx:DataGridColumn id="col1" headerText="Label" wi
-
Microphone Fix! For those who can't seem to get it working with CL Drivers or YouP-
Hi Guys,?I'm currently using the U-Pax mod and it's brilliant, thanks so much for sharing this neat bunch of software. By the way, many of you might have encountered their mics not working with the Creative X-Fi drivers (and consequently also not on?
-
Native JSON support in Next SQL Server Release
Dear Team, With 9.3 and upcoming 9.4 release PostgreSQL has started supporting JSON data type. Oracle is following it in their 12c release, when can we expect this in MS SQL? Also will it cover native functions within DB engine which can translate J