OMS and Agent Communication Problem?

Hi
All
I have installed OMS that have version 10.2.0.2 on windows server and Agent with version 10.1.0.4 on AIX.
Is it any problem with version of OMS and Agent?
Thanks,
Vishal

Sorry To ask question again. but I have read 412431.1 doc and it satisfy requirement. After reading that I proceed with installation but somehow I m getting this output
$ emctl status agent
Oracle Enterprise Manager 10g Database Control Release 10.2.0.2.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
Agent Version : 10.1.0.4.1
OMS Version : Unknown
Protocol Version : 10.1.0.2.0
Agent Home : /u07/app/oracle/product/10.2.0/moe.wsi_OWSIDEV
Agent binaries : /u07/app/oracle/product/10.2.0
Agent Process ID : 290972
Parent Process ID : 458882
Agent URL : http://moe.wsi.:3938/emd/main
Started at : 2007-10-10 14:58:20
Started by user : oracle
Last Reload : 2007-10-10 14:58:20
Last successful upload : (none)
Last attempted upload : (none)
Total Megabytes of XML files uploaded so far : 0.00
Number of XML files pending upload : 2459
Size of XML files pending upload(MB) : 24.56
Available disk space on upload filesystem : 36.92%
Agent is Running and Ready
and Here it's says OMS version is unknown So I dont' know what's going on here.
Thanks,
Vishal

Similar Messages

Issues after upgrading to 10.2.0.4 ( both OMS and Agent)

All,
we are observing this error quite a lot after upgrading to 10.2.0.4 ( both oms and agent)
2008-07-31 15:08:19,088 Thread-228 ERROR : (nmevrr.c,328):Memory 0x0 encountered, expect struct_id=12201
/u1/app/oracle/product/10.2.0/agent10g/lib32/libnmemso.so:snmeuctx_setGenCtx+0x912
/u1/app/oracle/product/10.2.0/agent10g/lib32/libnmemso.so:nme_class_error+0x184
/u1/app/oracle/product/10.2.0/agent10g/lib32/libnmemso.so:nmevrr_Recvlet_refreshState+0x264
/u1/app/oracle/product/10.2.0/agent10g/lib32/libnmemso.so:nmevrg_RegisteredRecvlet_refreshState+0x228
/u1/app/oracle/product/10.2.0/agent10g/lib32/libnmemso.so:nmevrm_RecvletManager_init+0x5544
/u1/app/oracle/product/10.2.0/agent10g/lib32/libnmemso.so:nmecmgr_discardState+0x1792
/u1/app/oracle/product/10.2.0/agent10g/lib32/libnmemso.so:nmecmgr_discardState+0x376
/u1/app/oracle/product/10.2.0/agent10g/lib32/libnmemso.so:nmemdisp_GetMetric+0x10212
/u1/app/oracle/product/10.2.0/agent10g/lib32/libnmemso.so:nmemdisp_GetMetric+0x15664
/u1/app/oracle/product/10.2.0/agent10g/lib32/libnmemso.so:nmehl_disabled_remote_ops+0x2600
/u1/app/oracle/product/10.2.0/agent10g/lib32/libnmemso.so:nmttprutc_reconfigUsingTargetCount+0x448
/u1/app/oracle/product/10.2.0/agent10g/lib32/libnmemso.so:nmttprutc_reconfigUsingTargetCount+0x596
/lib/libc.so.1:_thr_slot_offset+0x1132
we have these patches 7012242,7031906,5961654,5632264 installed on the agent home.
I have also disabled the instance health metrics for all the 10g target db on this host.
Anybody has any idea how to resolve this . This is becoming quite annoying .
thanks in advance
pk

Hi,
Just to comfort you, and yes we do monitor 10.2.0.3 instances. This comes from the emagent.trc on one of many rdbms server. The same is not found on other servers running 10.2.0.3 instances. The time coincide with an agent crash on this server. Keeping an eye on this thread while trying to find out what it is related to.
EDIT: This is due to bug 7012242, see metalink docId: 579137.1
2008-08-15 05:30:03,081 Thread-689845 ERROR : (nmevrr.c,328):Memory 0x0 encountered, expect struct_id=12201
/oracle/product/agent10g/lib32/libnmemso.so:snmeuctx_setGenCtx+0x912
/oracle/product/agent10g/lib32/libnmemso.so:nme_class_error+0x184
/oracle/product/agent10g/lib32/libnmemso.so:nmevrr_Recvlet_refreshState+0x264
/oracle/product/agent10g/lib32/libnmemso.so:nmevrg_RegisteredRecvlet_refreshState+0x228
/oracle/product/agent10g/lib32/libnmemso.so:nmevrm_RecvletManager_init+0x5544
/oracle/product/agent10g/lib32/libnmemso.so:nmecmgr_discardState+0x1792
/oracle/product/agent10g/lib32/libnmemso.so:nmecmgr_discardState+0x376
/oracle/product/agent10g/lib32/libnmemso.so:nmebb_uploadTargetState+0x928
/oracle/product/agent10g/lib32/libnmemso.so:nmebb_updateBlackoutInfo+0x384
/oracle/product/agent10g/lib32/libnmemso.so:nmesse_executeWork+0x132
/oracle/product/agent10g/lib32/libnmemso.so:nmttprutc_reconfigUsingTargetCount+0x448
/oracle/product/agent10g/lib32/libnmemso.so:nmttprutc_reconfigUsingTargetCount+0x596
/lib/libc.so.1:_thr_slot_offset+0x1128
Message was edited by:
ivirnig

Reg oms and agent versions

Hi,
I have enteprise grid 10.2.0.5
what my question can the oms and agent can be different versions
like oms is 10.2.0.5
agent is 10.2.0.3
thanks

Use metalink article: 412431.1 as a reference to know which versions are certified.
If you OMS is 10.2.0.5, you shold upgrade your agent to 10.2.0.5 as well.

ORACLE GRID OMS and agent service issue..

Dear all,
i am a solaris admin..please help me .. I am facing problem in discover oracle database through oracle agent...
We installed oracle DB 10g R2 in solaris standalone server ..we have install OMS .. hostname is hostname01
We have install OMS client at windows server in some domain host.domain.com
Is it possible to install and configure OMS and Client in non domain [dns] environment?
because we can able ping ip address from windows to solaris and vice vesa...
but i can't able to nslookup..because sun server not in that domain... nslookup only search at DNS server ...
it wouln't resolve hostname to ip address...
what is procedure to configure in OMS and client in non -DNS environment??

update the hosts file on all (client, OMS server, db server) sides to be able to ping by name from any server.
eg.
solaris /etc/hosts
10.121.121.3 <servername>.<domian> <alias>
retry your ping test by name.

GPIB and RS232 communication problems

I've been having several "interesting" problems with GPIB and RS232 communications in LabVIEW VIs. Some I'll mention at the end for curiosity, but right now I'm facing a rather big problem. I'm essentially self-taught at doing LabVIEW (using 8.5.1 right now), but by now I've had a lot of experience as their either has not been any drivers or pre-made VIs for the instruments I've needed or I've not been able to get the available drivers to work and had to write my own anyway (such as with the HP 3458A), but nothing seems to be working right now. I'm not at work, but we typically find forum sites blocked anyway (I can't even download the NI drivers at work since they house them on a ftp server, go figures) so I can't give the VI itself (it wouldn't be easy to get approval even if I could) so the best I can do right now is in words describe everything I've tried. I will be happy to post follow-ups of specific details if I can if they would be helpful.
I've been working on a routine to read data from an MKS 670 Signal Conditioner/Display with a MKS 274 Multiplexer with 3 connected MKS 690A Baratrons. Previously I've worked on programs using other older displays and the analog outputs which were being read by a DAQ card, but for a new project it was decided to try and just read the data directly. I first worked with a unit with just an RS232 Serial Port which I managed to get to work, but had so much problems with garbage readings and having to add checks and re-reads that by the end no matter what delays I added between each reading and how simplified the command routine down to just 2 sequences and the read that it took at least 10 seconds to get 1 reading from each channel.
Figuring maybe it was a limitation of the serial communications for these instruments I tried to re-work it for a unit with a GPIB port with which I'm actually much more familiar. The problem is that I cannot get anything at all from the unit through GPIB. Everything even the bare-bones built-in GPIB CLR function times out with no response from the instrument no matter how long I set the timeout limit and it also freezes the entire GPIB bus as well. It isn't a waiting issue as it freezes on the very first command. The GPIB initialization function seems to work (I typically find this to be unnecessary), but the instrument itself doesn't even respond with a status code. I've also tried just the basic GPIB write functions with even just passing the <cr> and <lf> characters as well. In Measurement and Automation Explorer most of the time the instrument won't even appear when doing search for instruments and when it does it shows as not responding to the *IDN? command (yes I've messed with the EOI, EOS, etc settings and I've even changed the GPIB address even though when it gets this far it confirms that I have the correct address) and even tried manually doing the *IDN?, *RST, and *CLR commands even with <cr> and <lf> characters which the manual for these units clearly states are compatible commands and NI SPY and everything show no response at all. I've tried 2 different GPIB units, 3 different computers including several that are not online and haven't been updated for a while, and using older LabVIEW versions, extensive re-booting and resetting of computers and devices and still nothing. I'm using an NI GPIB-USB-HS GPIB to USB adaptor which I've used extensively on other systems and even re-connected to those systems and everything worked fine. When I hooked up equipment that I knew was working, it would either freeze the entire GPIB bus until well past whatever timeout setting I set at which point all the instruments would appear, but none responding to *IDN? queries or nothing would appear at all, or if I manually turned it off when frozen the other instruments would work and most even respond to the *IDN? queries. The same goes for both of the GPIB instruments of this type that I tried and again for different versions of LabVIEW, difference computers (all Windows XP though), and every GPIB configuration setting I can find to mess with in every combination.
Any thoughts or suggestions would be greatly appreciated. I've had all sorts of weird problems with equipment and LabVIEW (you've got to love undocumented design features) that have frustrated me before, but I've never had an instrument never respond at all especially a GPIB one. Getting garbage yes, no response at all, no.
The side side issues I'm just mentioning as they may be related, but I'm really interested in the above as I have working solutions for these:
One I've had is with a Hart Scientific (prior to being bought by Fluke) 1560 Black Stack that would continually stop responding to GPIB commands when on a continual read function taking readings just every 4 seconds with 250ms between each GPIB read or write command but for up to hours in total and the times it stops responding are random as far as I can tell. I even started sending the *RST command before and after every read or write command and still it freezes. The only thing is to manually turn it off and then back on or manually go through the menus and manually trigger the GPIB reset routine at which point it immediately starts responding. However, when I got sick of having to babysit it and just decided to try the RS232 serial port (as that is all it has without the extended communications module) it works fine no problem and I can even get readings slightly faster from it. Using a Hart Scientific 1529 Chub-e it could give me data on all 4 channels every second without problems. I just find it a bit odd.
When I couldn't get any of the HP 3458A driver packs to work to even give a single measurement reading and just made my own using basic GPIB read/write commands using the programming manual I still have a few interesting problems in randomly when reading off the full possible 256 bytes on the bus and clearing the bus I often find garbage partial readings on the bus every now and then. I've added a few routines to do some basic checks, but it is annoying. What is really weird is when just doing basic DC Voltage reads the "-" sign will randomly be dropped from some readings (started as about 1 out of every 5, down now to about 1 out of every 10). Fortunately I'm taking several readings and averaging and taking the standard deviation with limits on the deviations and basically added a routine to say if there is even 1 negative number take the absolute value of all then make all negative, but again I find it weird.
Thanks.
-Leif
Leif King
Metrology Engineer
Oak Ridge Metrology Center

Greetings Leif,
I understand you have completed extensive troubleshooting techniques to pin-point the problem with the GPIB communication. To begin, I want to ask you a few questions to help me understand your set-up and the issue at hand.
1) Is the NI GPIB-USB-HS cable the one which cannot communicate with your instrument?
2) When using the GPIB-USB-HS, does the GPIB interface show up in MAX?
3) If yes, does the instrument appear in MAX after scanning for instruments (from what I understand in your issue, it does so in an intermittent manner..)?
4) What driver version of VISA do you have installed in your computer?
5) Are you able to communicate to the same instrument using another GPIB cable?
Thank you for trying out some of these steps again, but we want to make sure we rule out other aspects in the systems which might be affecting the GPIB communication.
As for your other issues, please post seperate threads for each so we can help you accordingly. Thanks!
Sincerely,
Aldo
Aldo A
Applications Engineer
National Instruments

Patching Grid Control OMS and Agent to 10.2.0.5 issue

Oracle 11gR1 RHEL5 - Grid Control 10.2.0.5
Hi All,
I have been stuck on this issue for over a month (was relying on Oracle supports help and they just would not reply) and I can't figure it out. Basically, what happened is that my 10.2.0.5 patch set failed partiallty when I was applying it to the OMS. Here is what is going on right now:
Database Repository (EMREP) - 11gR1 (11.1.0.6) - /opt/app/oracle/product/11.1.0/db_1
OMS - 10.2.0.5 - /opt/app/oracle/product/10.2.0/grid_1/oms10g
Agent - 10.2.0.5 - /opt/app/oracle/product/10.2.0/grid_1/agent10g
When I was almost done with the 10.2.0.5 patch on the OMS, OUI gave me the following error:
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration
assistants at this time. Not successfully running any "Recommended" assistants
means your system will not be correctly configured.
*1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the*
failures.
*2. Fix the errors causing these failures.*
*3. Select the failed assistants and click the 'Retry' button to retry them*
When I checked the logs I found the following messages (Here is a part of it...I think before it started to fail):
Finished deleting the above files...
INFO: Configuration assistant "OMS Oneoff Patch Application" succeeded
INFO: Command = oracle.sysman.emcp.oms.RepositoryPatchUpgrade -verbose
Repository Upgrade is failed with errors. Restore the database, rectify the errors and retry the install.
For more details :
-For configuration issues, look at the log files present in following location:
/opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/cfgfw
-For repository failures, look at the log files
/opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emrepmgr.log.10.
2.0.5.0
/opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emrepmgr.log.10.2.0.5.0.errors
-If not able to identify the repository issues, contact ORACLE Support.
-After the Repository issues are rectified and upgraded successfully, execute the below runConfig command to run remaining config tools.
Goto /opt/app/oracle/product/10.2.0/grid_1/oms10g/oui/bin directory and run below command.
For UNIX :
./runConfig.sh ORACLE_HOME=/opt/app/oracle/product/10.2.0/grid_1/oms10g ACTION=patchsetConfigure MODE=perform COMPONENT_XML=oracle.sysman.top.oms.10_2_0_5_0.xml
For Windows :
runConfig.bat ORACLE_HOME=/opt/app/oracle/product/10.2.0/grid_1/oms10g ACTION=patchsetConfigure MODE=perform COMPONENT_XML=oracle.sysman.top.oms.10_2_0_5_0.xml
Command = oracle.sysman.emcp.oms.RepositoryPatchUpgrade has failed
Exception : java.lang.Exception: Command: /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/admin/emdrep/bin/RepManager -connect (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=rhel-grid)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=emrep))) -action upgrade -no_transx -no_verify -verbose -repos_user sysman -output_file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emrepmgr.log.10.2.0.5.0 failed. Exit code: expected [0 ], but got 45
INFO: Configuration assistant "Repository Upgrade" failed
*** Starting OUICA ***
Oracle Home set to /opt/app/oracle/product/10.2.0/grid_1/oms10g
Configuration directory is set to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs. All xml files under the directory will be processed
Parsing configuration file config.xml ....
Ended Parsing configuration file config.xml
Start Processing configuration tool Oracle Internet Directory Patch Configuration Assistant....
Preparing for copying /opt/app/oracle/product/10.2.0/grid_1/oms10g/ldap/log/patchca.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs
Buffer size for copying file is set to 2048
Expanding source path /opt/app/oracle/product/10.2.0/grid_1/oms10g/ldap/log/patchca.log
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/ldap/log/patchca.log from the file path expanding...
WARN: Source file /opt/app/oracle/product/10.2.0/grid_1/oms10g/ldap/log/patchca.log could not be found. Nothing will be copied for this file
Number of file(s) copied is 0
Number of directories copied is 0
End Processing configuration tool Oracle Internet Directory Patch Configuration Assistant
Start Processing configuration tool Directory Integration Platform Configuration Assistant....
Preparing for copying /opt/app/oracle/product/10.2.0/grid_1/oms10g/ldap/log/oidca.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs
Expanding source path /opt/app/oracle/product/10.2.0/grid_1/oms10g/ldap/log/oidca.log
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/ldap/log/oidca.log from the file path expanding...
WARN: Source file /opt/app/oracle/product/10.2.0/grid_1/oms10g/ldap/log/oidca.log could not be found. Nothing will be copied for this file
Number of file(s) copied is 0
Number of directories copied is 0
End Processing configuration tool Directory Integration Platform Configuration Assistant
Start Processing configuration tool OC4J Instance Configuration Assistant....
Preparing for copying /opt/app/oracle/product/10.2.0/grid_1/oms10g/j2ee/home/log/* to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs
Expanding source path /opt/app/oracle/product/10.2.0/grid_1/oms10g/j2ee/home/log/*
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/j2ee/home/log/home_default_island_1 from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/j2ee/home/log/operations from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/j2ee/home/log/log.xml from the file path expanding...
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/j2ee/home/log/log.xml to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/log.xml
Number of file(s) copied is 1
Number of directories copied is 0
End Processing configuration tool OC4J Instance Configuration Assistant
Start Processing configuration tool OPMN Configuration Assistant - start HTTP server....
Preparing for copying /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/* to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs
Expanding source path /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/*
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/WebCache~WebCacheAdmin~1 from the file path expanding...
Number of directories copied is 0
End Processing configuration tool OPMN Configuration Assistant - start OCA Instance
Start Processing configuration tool Wireless Configuration Assistant....
Preparing for copying /opt/app/oracle/product/10.2.0/grid_1/oms10g/wireless/logs/upgrade_CA.out to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs
Expanding source path /opt/app/oracle/product/10.2.0/grid_1/oms10g/wireless/logs/upgrade_CA.out
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/wireless/logs/upgrade_CA.out from the file path expanding...
WARN: Source file /opt/app/oracle/product/10.2.0/grid_1/oms10g/wireless/logs/upgrade_CA.out could not be found. Nothing will be copied for this file
Number of file(s) copied is 0
Number of directories copied is 0
End Processing configuration tool Wireless Configuration Assistant
Start Processing configuration tool Wireless Metadata Repository Update....
Preparing for copying /opt/app/oracle/product/10.2.0/grid_1/oms10g/wireless/logs/upgrade_CA.out to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs
Expanding source path /opt/app/oracle/product/10.2.0/grid_1/oms10g/wireless/logs/upgrade_CA.out
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/wireless/logs/upgrade_CA.out from the file path expanding...
WARN: Source file /opt/app/oracle/product/10.2.0/grid_1/oms10g/wireless/logs/upgrade_CA.out could not be found. Nothing will be copied for this file
Number of file(s) copied is 0
Number of directories copied is 0
End Processing configuration tool Wireless Metadata Repository Update
Start Processing configuration tool Portal Metadata Repository Update....
Preparing for copying /opt/app/oracle/product/10.2.0/grid_1/oms10g/portal/upg/plsql/upgrade.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs
Expanding source path /opt/app/oracle/product/10.2.0/grid_1/oms10g/portal/upg/plsql/upgrade.log
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/portal/upg/plsql/upgrade.log from the file path expanding...
WARN: Source file /opt/app/oracle/product/10.2.0/grid_1/oms10g/portal/upg/plsql/upgrade.log could not be found. Nothing will be copied for this file
Number of file(s) copied is 0
Number of directories copied is 0
End Processing configuration tool Portal Metadata Repository Update
Start Processing configuration tool OPMN Configuration Assistant....
Preparing for copying /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/* to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs
Expanding source path /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/*
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/WebCache~WebCacheAdmin~1 from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/OC4J~OC4J_EM~default_island~1 from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/dcm-daemon~dcm-daemon~dcm~1 from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/ons.log from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/WebCache~WebCache~1 from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/OC4J~OC4J_EMPROV~default_island~1 from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/states from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/OC4J~home~default_island~1 from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/opmn.log from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/HTTP_Server~1 from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/ipm.log from the file path expanding...
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/WebCache~WebCacheAdmin~1 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/WebCache~WebCacheAdmin~1
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/OC4J~OC4J_EM~default_island~1 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/OC4J~OC4J_EM~default_island~1
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/dcm-daemon~dcm-daemon~dcm~1 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/dcm-daemon~dcm-daemon~dcm~1
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/ons.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/ons.log
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/WebCache~WebCache~1 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/WebCache~WebCache~1
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/OC4J~OC4J_EMPROV~default_island~1 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/OC4J~OC4J_EMPROV~default_island~1
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/OC4J~home~default_island~1 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/OC4J~home~default_island~1
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/opmn.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/opmn.log
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/HTTP_Server~1 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/HTTP_Server~1
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/ipm.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/ipm.log
Number of file(s) copied is 10
Number of directories copied is 0
End Processing configuration tool OPMN Configuration Assistant
Start Processing configuration tool Application Server Control Configuration Assistant....
Preparing for copying /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/* to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs
Expanding source path /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/*
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.10 from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emdctl.log from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emrepmgr.log.10.2.0.4.0 from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emagentfetchlet.trc from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.1 from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.4 from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.7 from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.log from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/nfsPatchPlug.log from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/em-application.log from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.9 from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.8 from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emrepmgr.log.10.2.0.5.0 from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emdctl.trc from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emctl.log from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/server.log from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/secure.log from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.6 from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/em.nohup from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emrepmgr.log.10.2.0.5.0.errors from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/em-web-access.log from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/pafLogs from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emias.log from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.5 from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emrepmgr.log.10.2.0.4.0.errors from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.3 from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emagent.trc from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/rmi.log from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emagent.log from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.2 from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emca_repos_out_of_box12_56_33.log from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emagentfetchlet.log from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.log.1 from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emrepmgr.log.10.2.0.5.0.transx from the file path expanding...
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emoms.trc
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.10 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emoms.trc.10
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emdctl.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emdctl.log
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emrepmgr.log.10.2.0.4.0 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emrepmgr.log.10.2.0.4.0
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emagentfetchlet.trc to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emagentfetchlet.trc
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.1 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emoms.trc.1
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.4 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emoms.trc.4
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.7 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emoms.trc.7
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emoms.log
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/nfsPatchPlug.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/nfsPatchPlug.log
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/em-application.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/em-application.log
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.9 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emoms.trc.9
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.8 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emoms.trc.8
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emrepmgr.log.10.2.0.5.0 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emrepmgr.log.10.2.0.5.0
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emdctl.trc to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emdctl.trc
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emctl.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emctl.log
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/server.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/server.log
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/secure.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/secure.log
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.6 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emoms.trc.6
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/em.nohup to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/em.nohup
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emrepmgr.log.10.2.0.5.0.errors to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emrepmgr.log.10.2.0.5.0.errors
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/em-web-access.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/em-web-access.log
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emias.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emias.log
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.5 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emoms.trc.5
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emrepmgr.log.10.2.0.4.0.errors to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emrepmgr.log.10.2.0.4.0.errors
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.3 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emoms.trc.3
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emagent.trc to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emagent.trc
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/rmi.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/rmi.log
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emagent.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emagent.log
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.2 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emoms.trc.2
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emca_repos_out_of_box12_56_33.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emca_repos_out_of_box12_56_33.log
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emagentfetchlet.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emagentfetchlet.log
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.log.1 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emoms.log.1
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emrepmgr.log.10.2.0.5.0.transx to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emrepmgr.log.10.2.0.5.0.transx
Number of file(s) copied is 34
Number of directories copied is 0
End Processing configuration tool Application Server Control Configuration Assistant
Start Processing configuration tool DCM Repository Update Assistant ....
Preparing for copying /opt/app/oracle/product/10.2.0/grid_1/oms10g/dcm/logs/* to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs
Expanding source path /opt/app/oracle/product/10.2.0/grid_1/oms10g/dcm/logs/*
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/dcm/logs/dcmctl_logs from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/dcm/logs/emd_logs from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/dcm/logs/daemon_logs from the file path expanding...
Number of file(s) copied is 0
Number of directories copied is 0
End Processing configuration tool DCM Repository Update Assistant
INFO: The "/opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
INFO: Since the option is to overwrite the existing /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/configToolFailedCommands file, backing it up
INFO: The backed up file name is /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/configToolFailedCommands.bak.1
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK
INFO: Starting to execute configuration assistants
INFO: Command = oracle.sysman.emcp.oms.RepositoryPatchUpgrade -verbose
Repository Upgrade is failed with errors. Restore the database, rectify the errors and retry the install.
For more details :
-For configuration issues, look at the log files present in following location:
/opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/cfgfw
-For repository failures, look at the log files
/opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emrepmgr.log.10.2.0.5.0
/opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emrepmgr.log.10.2.0.5.0.errors
-If not able to identify the repository issues, contact ORACLE Support.
-After the Repository issues are rectified and upgraded successfully, execute the below runConfig command to run remaining config tools.
Goto /opt/app/oracle/product/10.2.0/grid_1/oms10g/oui/bin directory and run below command.
For UNIX :
./runConfig.sh ORACLE_HOME=/opt/app/oracle/product/10.2.0/grid_1/oms10g ACTION=patchsetConfigure MODE=perform COMPONENT_XML=oracle.sysman.top.oms.10_2_0_5_0.xml
For Windows :
runConfig.bat ORACLE_HOME=/opt/app/oracle/product/10.2.0/grid_1/oms10g ACTION=patchsetConfigure MODE=perform COMPONENT_XML=oracle.sysman.top.oms.10_2_0_5_0.xml
Command = oracle.sysman.emcp.oms.RepositoryPatchUpgrade has failed
Exception : java.lang.Exception:
REPOSITORY UPGRADE STATUS : 3
INFO: Configuration assistant "Repository Upgrade" failed
I would appreciate any help on this as I have been stuck on it since April :( Not too happy with Oracle Support.
Thanks much to all!
JrOraDBA

Here is the output for when I applied the patch:
opatch apply
Invoking OPatch 10.2.0.3.0
Oracle interim Patch Installer version 10.2.0.3.0
Copyright (c) 2005, Oracle Corporation. All rights reserved..
Oracle Home       : /opt/app/oracle/product/10.2.0/grid_1/db10g
Central Inventory : /opt/app/oracle/oraInventory
from           : /etc/oraInst.loc
OPatch version    : 10.2.0.3.0
OUI version       : 10.2.0.3.0
OUI location      : /opt/app/oracle/product/10.2.0/grid_1/db10g/oui
Log file location : /opt/app/oracle/product/10.2.0/grid_1/db10g/cfgtoollogs/opatch/opatch2009-04-22_12-07-14PM.log
ApplySession applying interim patch '4329444' to OH '/opt/app/oracle/product/10.2.0/grid_1/db10g'
Invoking fuser to check for active processes.
Invoking fuser on "/opt/app/oracle/product/10.2.0/grid_1/db10g/bin/oracle"
OPatch detected non-cluster Oracle Home from the inventory and will patch the local system only.
Please shutdown Oracle instances running out of this ORACLE_HOME on the local system.
*(Oracle Home = '/opt/app/oracle/product/10.2.0/grid_1/db10g')*
Is the local system ready for patching?
*Do you want to proceed? y*
y
User Responded with: Y
Backing up files and inventory (not for auto-rollback) for the Oracle Home
Backing up files affected by the patch '4329444' for restore. This might take a while...
Backing up files affected by the patch '4329444' for rollback. This might take a while...
Patching component oracle.rdbms, 10.1.0.4.0...
Updating archive file "/opt/app/oracle/product/10.2.0/grid_1/db10g/lib/libserver10.a" with "lib/libserver10.a/qerix.o"
ApplySession adding interim patch '4329444' to inventory
Verifying the update...
Inventory check OK: Patch ID 4329444 is registered in Oracle Home inventory with proper meta-data.
Files check OK: Files from Patch ID 4329444 are present in Oracle Home.
Running make for target ioracle
The local system has been patched and can be restarted.
OPatch succeeded.
However, the weird thing is that I don't see it in the lsinventory:
*/opt/app/oracle/product/10.2.0/grid_1/db10g/OPatch/opatch lsinventory*
Invoking OPatch 10.2.0.3.0
Oracle interim Patch Installer version 10.2.0.3.0
Copyright (c) 2005, Oracle Corporation. All rights reserved..
Oracle Home       : /opt/app/oracle/product/10.2.0/grid_1/db10g
Central Inventory : /opt/app/oracle/oraInventory
from           : /etc/oraInst.loc
OPatch version    : 10.2.0.3.0
OUI version       : 10.2.0.3.0
OUI location      : /opt/app/oracle/product/10.2.0/grid_1/db10g/oui
Log file location : /opt/app/oracle/product/10.2.0/grid_1/db10g/cfgtoollogs/opatch/opatch2009-06-09_09-37-54AM.log
Lsinventory Output file location : /opt/app/oracle/product/10.2.0/grid_1/db10g/cfgtoollogs/opatch/lsinv/lsinventory2009-06-09_09-37-54AM.txt
Installed Top-level Products (2):
Oracle Database 10g Patch Set 3                                      10.1.0.5.0
Oracle Enterprise Manager Repository Database                        10.2.0.3.0
There are 2 products installed in this Oracle Home.
Interim patches (1) :
Patch 5632264      : applied on Thu Apr 23 12:23:10 CDT 2009
Created on 8 Feb 2007, 00:38:09 hrs PST8PDT
Bugs fixed:
*5632264*
OPatch succeeded.
Do you think I should restore the backup (and I only have the database backup, not the Oracle Home backup)?
THanks.

Oracle VM Agent- Communication problem

Setup several VM Servers with the default settings out of the tutorial. Started and tested the agent. I get the following error when I use this command:
/opt/ovs-agent-2.2/utils/do_rpc.py https://admin:myserverpassword@myothermachineshostname:8899 echo hello
Socket error! code=104, msg=Connection reset by peer
Agents are running on both machines with synchronized usernames and passwords (different IP and hostnames of course). They can ping each other and everything on the network. Am I missing something obvious? I'm very new to this.

Found out our wonderful network admins put a firewall between each rack without telling us. Nice. Problem solved.

JSSE Client and server communication problem .err:untrusted server cert

Hai all,
I am trying to communicate JSSE client and server.
I have created root.cert(CA),root.key,server.cert,server.key , client.cert and client.key. All these certificates are created using openssl.
I have placed root.cert in default keystore cacerts.
I have created a keystores(server & client) name mykeystore.
I have placed root.cert and client.cert in the client keystore.
I have placed root.cert and server.cert in the server keystore.
But during the run time i am getting javax.net.ssl.SSLException: untrusted server cert chain.
please suggest the modifications needs to be done to fix the error.
please tell me In the client keystore and in the server keystore....what certificates we need to put?
whether my approach as said above is correct or not?
In java code how to specify this particular certificate we are referring?
I have coded in this way ....
SSLContext ctx;
KeyManagerFactory kmf;
KeyStore ks;
char[] prasad = "prasad".toCharArray();
ctx = SSLContext.getInstance("SSLv3");
kmf = KeyManagerFactory.getInstance("SunX509");
ks = KeyStore.getInstance("jks");
ks.load(new FileInputStream("mykeystore"), prasad);
kmf.init(ks, prasad);
ctx.init(kmf.getKeyManagers(), null, null);
factory = ctx.getSocketFactory();
But my doubt is we are specifying only keystore name with that how it will check root.cert(ca) and client.cert and server.cert?
Is there any modifications need in my code?
Please tell me some way ...
Thanks ,
Prasad.

Hi prasad,
There will be a problem with the certificates being received from thr remote server or client. Check that your trust store contains the certificate of the remote machine or the CA that signed it and that the certificate has not expired.
Also be sure that both machines are using the latest version of the JSSE.
Hope this will help you.
Regards,
Anil.
Technical Support Engineer.

HELP!Flash Player and ActiveX communication problem in IE!

I've made a ActiveX Control which use a Modeless Dialog to
hold a
ShockWaveFlash ActiveX control. Then we could use this
ActiveX control
as a bridge to communication with the Flash which was held in
the
ShoclWaveFlash Control.
The struct is as below:
External APP or Html <--> My own ActiveX Control
<--> ShockWaveFlash
Player playing .swf file
In Firefox or MFC APP, everything is OK, but in IE, IF we
load local
swf file and set always local trust, we can get FSCommand in
our own
ActiveX,
But if we load a swf file from HTTP use URL to locate it, We
cann't get
the FSCommand fired from flash in our own ActiveX.
It should be a security issue of Flash8, but I don't know
whether a
remote SWF file can communicate with local ActiveX in IE???
Please Help! Thanks!

Please see this FAQ:
ActiveX Filtering in Internet Explorer

MQSeries and MDB communication problem

I was trying to write one MDB which will talk to MQSeries. After configuring everything(including the bindings and changes in weblogic-ejb-jar.xml) i deployed the MDB in weblogic6.1 sp2 server. It did not give me any error while deploying and container called the ejbCreate and setMessageContext methods without any problem. But it is not reading the messages from the MQ. It never picked up the messages from MQ. Can anyone please tell me what may be the reason?

I would suggest that you look at the JMS FAQ or read the archives in the JMS newsgroup. There's lots of posts about getting this to work.
-- Rob
Sujoy Das wrote:
I was trying to write one MDB which will talk to MQSeries. After configuring everything(including the bindings and changes in weblogic-ejb-jar.xml) i deployed the MDB in weblogic6.1 sp2 server. It did not give me any error while deploying and container called the ejbCreate and setMessageContext methods without any problem. But it is not reading the messages from the MQ. It never picked up the messages from MQ. Can anyone please tell me what may be the reason?--
AVAILABLE NOW!: Building J2EE Applications & BEA WebLogic Server
by Michael Girdley, Rob Woollen, and Sandra Emerson
http://learnWebLogic.com
[att1.html]

How much Maximum Distance I would keep between Oracle EM OMS and Agent ?

Hello There,
Here I am asking little curious question which come in my mind ?
Actually We have many client geographically located in different cities.And we are remotely managing their databases on VPN.
I just wanted to Install One Enterprise Manager Grid control for all these databases.
Here I assume we have 10Mbps Line between our head quater and Clients.
And regular agent upload max 1.5GB per month for each client.
Is it possible ?
If possible how much max distance(miles) do you recommended.
Thanks
Hemesh.
Edited by: Hemss on Jan 28, 2011 5:14 PM

Hi Hemesh,
are you sure that 2 GB of data are uploaded with every heartbeat? The best idea to figure out would be - from my point of view - just to test
it. Otherwise you will not get any feeling for the upload amount and upload time...

IPCC Express Supervisor and agent communication

Is there any facility in IPCC Express ( Enhanced) version for the supervisor to communicate with the agent without hearing the customer ?

Hi,
The supervisor can communication with agent by sending chat/install message from supervisor desktop.
Following is from Cisco Supervisor Desktop User's Guide
http://www.cisco.com/univercd/cc/td/doc/product/voice/sw_ap_to/apps_3_5/english/super/super_ug.pdf
Sending an Instant Message
The Message View pane enables you to send messages to individual agents or to all agents on the team you are currently viewing.
Hope it helps.
Regards
Venkat

Java card simulator and WTK communication problem.

Hi ,
I am a newbie to java card .I am doing project on java card based sim.
For that I am using JavaCard SDK 2.2.2 and WTK 2.5.2 .
Now when i am trying to connect to cref(java card simulator) from java card midlet,I am getting protocol mismatch error.This is because of WTK runs on slot T=0 and cref runs on T=1.
then i tried with jcdk3.0.1 classic edition.It provides cref configured to run on both slots T=0 and T=1.
But when I tried to deploy jcrmi applet on cref running on T=0 i am getting the same error "Protocol mismatch error".
Can anybody please tell, if there is any way to configure cref to run with T=0?
Please reply ASAP, as i am stucked with the problem from more than a month.
Thanks in advance,
Saviy

Thanks Anki for replying.
I am trying to run RMISample from development kit.With steps given in guide as follows
1.cref -o demoee
2.Navigate to the
JC_CLASSIC_HOME\samples\classic_applets\RMIPurse\applet
directory.
3.ant all
it works fine but when i do it with following steps:
1.cref -o -t0 demoee
2.Navigate to the
JC_CLASSIC_HOME\samples\classic_applets\RMIPurse\applet
directory.
3.ant all
i am getting protocol mismatch error.

WiSM-A and -B communication problem

I am deploying a 6509-WISM with 120 x 1130 APs running 4.1.181.0. Both controllers (A and B) are configured as LWAPP Layer 3 mode with he same mobility and RF domain. The APs use DHCP to obtain their IP through option 43. All APs register only to WiSM-B and none go to WiSM-A. I even tried configuring the Primary and Secondary Controller with WISM-A only and the APs are still only registering to WiSM-B only. Any advice would be greatly appreciated.

Hi Chris,
Since I restarted both controllers this morning, here are the only messages that show up in the log.... There should be more than that as far as I am concerned.+
Aug 24 15:20:39.932 hwutils.c:2159 INIT-0-MSGTAG007: Security Module not found.
Aug 24 15:20:39.161 bootos.c:874 INIT-0-MSGTAG001: Starting code...
We are also looking at the arp table on the default gateway and there is a MAC that is not making sense. On WISM-A ap-manager interface, the AMC shows up as being 001b.243d.a9f6 which is a Quanta Computer MAC..... but should be showing as a Cisco one. Will let you know.
Any thoughts?
Thanks

Tiger and USB communications problem....Invalid Class Exception

I purchased my G5 last April, and installed Tiger on it. Since installtion of Tiger I have been unable to run WeatherLink 5.01, 5.0.2 or 5.03, even after reinstalling the operating system. The issue is that the software is unable to connect to the Vantage Pro2 weather station via the USB port.
Each time the software shuts down, and here's the information in the Console:
java.io.InvalidClassException: globals.ProgConfigData; Local class not compatible: stream classdesc serialVersionUID=-3030819089009633781 local class serialVersionUID=-3230663525674838887
Index 1 for 'pxm#' 2062 out of range (must be between 0 and 0)
Attempted to read past end of 'pxm#'(2062) resourcejava.io.FileNotFoundException: /WeatherLink Install Log.log (Permission denied)
at java.io.FileOutputStream.open(Native Method)
at java.io.FileOutputStream.<init>(FileOutputStream.java:135)
at java.io.FileOutputStream.<init>(FileOutputStream.java:57)
at globals.SoftwareVersionTool.save(SoftwareVersionTool.java:93)
at win.main.MainWin.main(MainWin.java:4401)
at java.lang.reflect.Method.invoke(Native Method)
at com.zerog.lax.LAX.launch(Unknown Source)
at com.zerog.lax.LAX.main(Unknown Source)
at java.lang.reflect.Method.invoke(Native Method)
at apple.launcher.LaunchRunner.run(LaunchRunner.java:88)
at apple.launcher.LaunchRunner.callMain(LaunchRunner.java:50)
at apple.launcher.JavaApplicationLauncher.main(JavaApplicationLauncher.java:61)
exception: null
Exception occurred in main() of MainWin
The people who developed the WeatherLink software have run out of answers for me.
Thanks, John

Sorry this post is so late but I'm only just now setting up a Vantage Pro2 weather station.
You might want to check out a couple of alternatives to WeatherLink, neither of which is written in Java: wview and WeatherTracker. WeatherTracker has promise but is still in beta and has a lot of issues. However, it might be functional enough for you. You can download it through the WeatherTracker forums.
wview is a different animal from WeatherLink and WeatherTracker in that it has no windowed application: it uses your web browser as its display application. The only difficulty is that it's open source, requiring you to download it, build it, and configure it, all from the Terminal. The instructions on the wview web site are pretty good, though, and there's even an OS X-specific quick start page. Since wview is native code and not computationally intensive, the system requirements are pretty low, too: it's running quite well on an old 466 MHz G3 iBook SE (with an Airport card) I had lying around gathering dust, which allows the VP2 console to be located just about anywhere and still used for data logging instead of requiring the purchase of a Wireless Envoy.
You can check out my weather page to get an idea of wview's capabilities. As I write this, I'm using wview's built-in weather station simulator, but I will start using live data hopefully in about a week, pending the arrival of my WeatherLink package (only needed to get the data logger).

OMS and Agent Communication Problem?

Similar Messages

Maybe you are looking for