OMS and STNC Dash board
Hi
Can anyone have worked on OMS and STNC Dash board?
If does please brief me on those topics.
Thanks in advance
Is the Windows Taskbar still visible when you boot the computer?
If not the try to pull it up by putting the mouse pointer at the bottom and drag it up with the left mouse key pressed.
Make sure that you do not run Firefox in full screen mode (press F11 or Fn + F11 to toggle; Mac: Command+Shift+F).
*https://support.mozilla.org/kb/how-to-use-full-screen
Similar Messages
-
Where is my deks top and my dash board
at the bottom of my screen i used to have my desk top icons and clock and volume control, time of day and connectivity info,now its gone . how do i get it back
Is the Windows Taskbar still visible when you boot the computer?
If not the try to pull it up by putting the mouse pointer at the bottom and drag it up with the left mouse key pressed.
Make sure that you do not run Firefox in full screen mode (press F11 or Fn + F11 to toggle; Mac: Command+Shift+F).
*https://support.mozilla.org/kb/how-to-use-full-screen -
Crystal Report and Dash Board Report templates
Hi All,
I was wondering can you help to find out few Crystal report and Dash Board report Templates for SAP Business One.
This in order to give demo to customers.
Link pointing to same is good enough. I have authorization to SAP portal and I have searched through it found only two template of Crystal report no Dash report templates.
Regards,
AdityaHi Adit,
For CR demo, you can use this youtube CR demo:
http://www.youtube.com/watch?v=bKLtTDNpQMM
For the CR sample templates donwload, you can check this link:
http://scn.sap.com/thread/1239521
If you want to create the template by your self, you can check this link:
http://scn.sap.com/thread/1627677
For dashboard sample, you can download from this link:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e0bd3605-e1ad-2d10-488d-f2e4fede1d46
JimM -
Error while running script HyperV - Dash Board - VM and Storage Report
Hi Team,
I am getting below error while running HyperV dashoboard monitor & storage report script from Technet script library.
HyperV - Dash Board - VM and Storage Report
Finished processing VM - xxxx
Processing VM - xxxxx
Get-VHD : Unable to cast COM object of type 'System.__ComObject' to interface type 'System.Management.IWbemServices'.
This operation failed because the QueryInterface call on the COM component for the interface with IID
'{9556DC99-828C-11CF-A37E-00AA003240C7}' failed due to the following error: The requested object does not exist.
(Exception from HRESULT: 0x80010114).
At C:\Scripts\HyperV-DashBoard-v2.1.ps1:210 char:10
+ If (Get-VHD -VMID $vmDetails.VMID -ComputerName $cNodes.Name[$i])
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [Get-VHD], InvalidCastException
+ FullyQualifiedErrorId : Unspecified,Microsoft.Vhd.PowerShell.GetVhdCommand
Get-VMNetworkAdapter : Unable to cast COM object of type 'System.__ComObject' to interface type
'System.Management.IWbemServices'. This operation failed because the QueryInterface call on the COM component for the
interface with IID '{9556DC99-828C-11CF-A37E-00AA003240C7}' failed due to the following error: The requested object
does not exist. (Exception from HRESULT: 0x80010114).
At C:\Scripts\HyperV-DashBoard-v2.1.ps1:238 char:12
+ If ((Get-VMNetworkAdapter -VMName $vmDetails.Name -ComputerName $cNodes.Na ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [Get-VMNetworkAdapter], InvalidCastException
+ FullyQualifiedErrorId : Unspecified,Microsoft.HyperV.PowerShell.Commands.GetVMNetworkAdapterCommandHi ,
I found that the problem had been solved in the script blog by your self :
http://gallery.technet.microsoft.com/scriptcenter/HyperV-Dash-Board-VM-Disk-299bac7d/view/Discussions#content
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Dash board and app store in the same window
And I cant use either.. Untill I deleted all the wigets and then I could use the app store... How do I get the app store to launch seperatly from my dash board in Lion..
If it says the user id and passcode is not correct then it isn't, even if you think it is. Or someone has hacked your ID and changed your password.
-
hi i found a spaces and dash board feature... when starting spaces or dash board hold down the shift key to make it apear in slow motion
Hi,
Plese try below method:
under (HKLM\SOFTWARE\Microsoft\Microsoft Operations Manager\3.0\Data Warehouse\):
• Increase the value of Bulk Insert Command Timeout Seconds to 80.
• Create a new DWORD value, name it “Search Command Timeout Seconds” and set its value to 300.
If these are custom Dashboards. If yes, are the built-in dashboards have the same issue. Does them show data as expected?
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. -
Dash board report for make to stock scenario?
hi friends,
Here i am having a problem that, I need to do the dash board report to display the sales and production values (quanty s , value) with particular date comparission.
some more detailed.
my client need the report with day wise production and sales values with respective of material number. I can make the report if it is make to order situation. but , this is make to stock situation. and also mentioned that values should match the G\L Account ,ref: fs10n Transaction.
plz help out ......
rewards in advance.
Regards,
Naveen MThe definition of Organization structure might not allow you to do so
Please go throught the following link in detail http://help.sap.com/saphelp_47x200/helpdata/en/f4/7d3f9344af11d182b40000e829fbfe/frameset.htm
Summary from the above link is as mentioned below
You can plan material requirements at plant level or for different MRP areas. With MRP at plant level, the system adds together stocks from all of the individual storage locations, with the exception of individual customer stock, to determine total plant stock. The requirements are combined in the planning run and procurement elements are created for these pegged requirements with unknown sources. Individual storage locations can be planned separately or be excluded from planning.
In the case of material requirements planning on an MRP area level, only the stocks from the storage locations or subcontractor assigned to the respective MRP area are taken into account. Only the requirements in this MRP area are combined and procurement elements are created for them. This enables you to plan material requirements specifically for certain areas. -
Error while executing the BO Dash Board
Dear Sapians
i am facing the following issues in the BO while execute the Dash Board.
But the authorization working fine in BW side . In the filter of the BO Dash Board i am getting the correct values which i was restricted in the BW side.
Please help me to solve this.
Thanks
HajiHi Vamsi.
The exactly erro refers to a problems when you try upgrade from these version to 11.5.10.
Can you read this note and apply solution? The note refers a patch, but the problem is the same.
After Patch 4334965, adstrtal.sh & adstpall.sh is failing with errors [ID 360046.1]
BR Rafael Ceolim -
How can we show percentages in BO Dash board Manager(PMDM)
Hi ,
Please help me to find the option in Dash Board Manager to show percentages of metrics.
Regards,
TejaHello josborne,
i feel for you as a year ago i was undergoing the same problem. I was using Basler cameras for bar code reading and i was using two of them at a time. i was getting the same error. In my case the issue was resolved after much pain. i changed the PCI cards, switched between a lot of softwares and hardwares to get the required results. In the end my issue came down to the Fire wire cable. I was using a very cheap cable. Perhaps this is the only thing i can add that you might be using some non+standard fire wire cable.
perhaps you can try replacing it and then see the results.
Regards
Asad Tirmizi
Design Engineer
Institute of Avionics and Aeronautics
" Its never too late to be, what u want to be"
Using LabVIEW 8.2 -
Including an link to an help file(*.chm) in dash board
hi,
is it possible to place an *.chm file(help file) in the dash board .
i tried but OBI is not opening it up in that format.
can some one give me an solution to this.
thanks'.chm' is a Microsoft Compiled Help file that only works in Microsoft Explorer. You are advised to convert it to a friendlier format like HTML.
As per Microsoft, due to a remote code execution vulnerability, you cannot open .chm from a URL. However there are some workarounds in the link below:
http://support.microsoft.com/kb/896054
Coming back to Oracle BI, you could open the link in a separate window, and ask users to download the chm. Once downloaded locally, the chm file should work fine.
HTH,
Nilanshu -
Integration of OBIEE Dash Boards with BPM Process
Hi ,
Could you please help me in integrating OBIEE Dash Boards with BPM . I thought of using 2 ways :
1) Integrating OBIEE with ADF First and then Integrating ADF with BPM . Its a long process but any other way if any one can help me .
2) Integrating OBIEE with BPM directly by generating webservices . but i couldnt get any options to generate the webservices for OBIEE .
Can anyone please guide me on this .
Thank you,
Sashank P.Check these links may help you.
http://docs.oracle.com/cd/E21764_01/bi.1111/e16364/actions.htm
http://gerardnico.com/wiki/ide/eclipse/eclipse_how_to_consume_a_webservice_with_wtp#the_result
http://gerardnico.com/wiki/dat/obiee/web_service -
Daily Shift wise Report, Dash board reports
Dear all
With refering to the present project in 4.7 version the customer requirement is below.
1. Shift wise maintenance report - Here they are presently maintaining Section, shift, Date, From time, To time , Job descriptions, attenede by remarks.
In another coloum in same sheet they needs
From time, To time , Delay descriptions, attenede by remarks.
Then thirs is communication for next shift- there they are writing the texts which they are saying to next shift guys.
2. Another what they wants is regularly top managers wants to see the maintenance details ( prev order, down time, consumption cost etc ) in their system dash board(screen) . they are not willing to go sap. How to do this thro .Net or workflow . This is report should be fulfiiled by us.
3 Shutdown Planning report- here they are maintaining the date wise job hours in graphical form. How we can activate this
I request you please have some idea about this.Dear Nandip/Iftikar,
Dear thanks 4 ur answers. I have asked the same with our abapers , but they are new and not able to help. i have well tried with notification customer table addition in spro. but its not helping as required.
The thing is i cant prepare the specs for this report. Example for shift we can create Z table. But Processing job description, Action taken, delay reasons how i can prepare the specs.
I request you to share your Program or specs please then its better for us. please send at thennarasu_kandasami@ welspun.com
Edited by: thenna arasu on Jun 2, 2008 2:12 PM -
Regarding New data in dash board
Hi gurus,
Can anybody tell me the steps to build a dash board, which can give me the fresh for every 10 minutes. As of now i know that in dash board we have one refresh button when ever we click on that, it brings the new data. So please tell me the steps to build this.
Thanks,
Narenhi
Please go through this link:-
http://www.w3schools.com/tags/tag_iframe.asp
You can create a simple html page with the iframe and javascript for reloading it.
This html page could also included in VC in a html view.
Regards
Navneet -
Using Dash board in Dot net Page
Hi,
I am using OBI dashboard. I have made my dash board looks fine.
But what i want to do is I want to integrate this dash board in dot net page.
I just want to show my dashboard in a dot net web page any code sample and any link
will be helpful.
I found a pdf at
http://download.oracle.com/docs/cd/E10415_01/doc/bi.1013/b31769.pdf
It is a long pdf and i have little knowledge about dot net.
i just want to show my dash board on my web site.
Thanks
UmeshUse urls like:
http://server/analytics/saw.dll?Dashboard&PortalPath=/shared/ABC/_Portal/ABCSummary&Page=PageName&NQuser=username&NQpassword=password&Action=Navigate&P0=2&P1=eq&P2=Time.Year&P3=1+2007&P4=eq&P5=Time.Month&P6=1+4 -
CProjects dash board fields not getting populated
Hi
Currently using cProjects 4.0 on ECC6.0 server.
Facing problem for dash board data. Have created the project in cProject. Completed all the tasks, phases and project header also. I want actual start and actual finish date data to appear on the dash board.
For evaluations I have done following settings:
Activated Use Dashboard for corresponding project type ('Define Project Types' under 'Evaluations' and 'Dashboard').
Specified when evaluations are executed as : Only with background processing ( 'Define Project Types' under 'Evaluations' and 'Dashboard').
Assigned the extract layout to the corresponding project types for the dashboard evaluations
Other settings:
Transaction SPRO -> Collaboration Projects -> Evaluations -> Define Extract Layouts
extract layour here is 0_DASHBOARD, attributes for this extract layout selected as Actual finish, actual start by checking the box of Always extract
But I am still unable to see the dates in the Actual finish and Actual start fields on the dash board for the project of that project type.
secondly,
Currently Actual start and Actual finish fields are hidden, I make them to displyed column in the settings, but whenever I leave the the home page and again come to home page these fields are again going to the hidden column. I want them to be shown permanently.
Please help on the same.
Thanks and Regards,
Niraj Sikligarhi Yogesh,
I did the same as mentioned by you.
Now I am getting following error message:
Error when processing your request
The following error text was processed in the system EC6 : Property GROUP_AGGREGATION with the value X is not allowed for key figure (PRIORITY)
Any Solution?
Maybe you are looking for
-
How to change blending mode on multiple layers at the same time
I'm using CS5. I have a document with about 70 layers. I would like to change the blending mode to "lighten" for each layer. Is there an easy way to do this?
-
Moving ipod files onto a mac WITHOUT using a program
My computer recently crashed and I have a good 30 songs that are new from the itunes store since the last time I backed up my music files. I have a mac formatted ipod and want to be able to put the music on it back onto the computer, but want to do s
-
Can anyone help blackberry curve 9320. Keypad buttons are not putting in the correct letters are numbers and also putting in more than one number or letter at a time.
-
Hi- When you insert a failure caption, the default text is "type failure text here." Is it possible to change the default text so you don't have to go in and change it each time you add a failure caption? Also, when you add a click box, the default "
-
How to uninstall powermanagement version 1.51a from winows7
version 1.51a powermanagement software installed to windows7 but cannot be uninstalled. When run uninstall from control panel the message says the program cannot run on this platform.