OMS Configuration Failed In the Process of Installing OEM Grid Control 10g

Hi every one,
i am getting the same problem in the installation Configuration Assistants, OMS Configuration Failed
I have already installed the Oracle software, created the databse and when i started installation, i selected the 2nd option to use the existing database.
here is i am getting the error:
details says that are as follows
oui-25031 oracle.sysman.emcp.agent.agentplugin,
so i followed the steps and drop the sysman user with cacade option
again i got the same error,
Environment:
Microsoft Windows XP Professional SP3,
Oracle 10G 10.2.0.1.0 (Already Installed)
Dell Inspiron 530
Intel(R)Core(TM)2 Quad CPU [email protected], 3.0GB RAM
have enough hard disk.
Now installing Oralce Enterprise Manager Grid Control 10g release2 (10.2)
i have seen the error messages in this forum many are on unix environment.
any views on windows operating system?
Thank You.

hi,
before you install grid, try and patch the database to a later release, 10.2.0.4
had this issue in work and patching the db resolved the issue.
I did install database software only, then patch then create database, then install grid
regards
Alan

Similar Messages

Error while installing OEM Grid Control

I am getting error while installing OEM Grid control (with existing database) at OMS Configuration. So, I cancelled the installation and deleted all databases and started the instal again. I am still getting an error at OMS configuration.
I am trying to read through the threads here to see if anyone has solved it. I see a lot of threads on this topic but not sure how you guys resolved it.
Can anyone help here.
In the oracle installer, I see the message : The c:\oraclehomes\agent10g\cfgtoollogs\configToolfailedCommands" script contains all commans that failed, were skipped or cancelled ....
--in this file, all I see is:
rem Copyright (C)1999, 2006 Oracle
oracle.sysman.emcp.agent.AgentPlugIn
How should I proceed
Thanks
Ramya
Edited by: Ramya Reddy on Mar 9, 2009 5:25 PM

go to AOh\bin and run agentca -f and check agent status

Installing OEM Grid Control not complete?

Hi,
I've installed OEM Grid Control on Solaris 5.10
Enterprise Manager 10g Grid Control Release 2 (v10.2.x)
Full Installers (Agent, Repository, OMS, and Management Packs)
from link
but no OMS ha been installed.
I had no choice during the installation process to mark it as well as other components like: Agent, Repository.
Is it not enough to use Disk1/.../runInstaller ???
Can anybody advice me how to install it completely (without patches, they blur the process to me, at present)
?

Yes, that should be enough. After that you have to choose one of the 2 choices and click next
1) Enterprise manager 10g grid control using new database
2) Enterprise manager 10g grid control using existing database.
Thanks,
Tarun

Installing OEM grid control on Linux 64 bit

Was someone able to install OEM grid control 10.2.0.1 on a RedHat linux 4.0 x86-64. I Know that it is not certified yet but most of the time it is possible to install a 32 bit application on a 64 bit OS.
Thanks

Yes, I have it installed. (let me tell you though, it wasn't easy!). A few notes:
1. Download and install compat-oracle-rhel4-1.0-5.i386.rpm from http://oss.oracle.com/projects/compat-oracle/files/RedHat/
(this essentially puts a wrapper around gcc and transforms it into a shell script)
2. Modify /usr/bin/gcc to look like this (add –m32):
exec /usr/bin/gcc32 -m32 -static-libgcc -B/usr/lib/gcc-lib/i386-redhat-linux/2.96/ "$@"
3. Execute “linux32 bash”
4. Run the installer.
Hope that helps.
P.S.: The installer might fail to detect the rpms below. Just make sure you have them installed.
compat-libstdc++-296-2.96-132.7.2
libstdc++devel-3.4.3-22.1
openmotif-21-2.1.30-11
Message was edited by:
D4Gov

Steps to install Oracle grid control 10g on windows

dears ,
kindly I need to install oracle grid control 10g release 5 on windows
so please if any one have a detailed step-by-step document for that post it to me ASAP
Regards.

Hi;
Please check below link
Oracle® Enterprise Manager Grid Control Installation and Configuration Guide 10g Release 5 (10.2.0.5.0)
http://download.oracle.com/docs/cd/B16240_01/doc/install.102/e10953/installing_em.htm
http://kamranagayev.wordpress.com/2011/01/31/video-tutorial-installing-oracle-10 gr2-grid-control-and-deploying-agent/
Regard
Helios

OEM Grid Control 10g Install

Hi,
I am new to OEM. I want to install OEM Grid Control in new linux maxhine. For this can i install any thing before go to OEM. Please help me out on this. Please expalin the install procedure.
Thanks in Advance,
Sridhar

Hey there :)
Can you elaborate on what you mean by "install an thing before", do you want to install other Oracle products, then OEM and point it to manage these installs?
As for the install procedure, a quick look at how its done is seen on the link below
http://www.oracle.com/technology/obe/obe10gem/install/gridinst/gridinst.htm
The Oracle By Example series can be quite a good base to start from when you are new to this area.
enjoy,
Grummy

How to install OEM Grid Control R2 on RHEL AS4 (AMD64/EM64T)

Hi all,
I was able to install the Oracle Application Server (Infrastructure and BI and Forms) successfully on the another machine with the same specs. The application I installed on the 64-bit machine is a 32-bit Oracle Application Server.
Now, I tried to install the OEM Grid Control R2 (another 32-bit Oracle Software) on an identical 64-bit machine but had no luck. Ran linux32 bash before trying the install.
I always get the error "error in invoking target 'dm_on ioracle' of makefile 'OH/db10g/rdbms/lib/ins_rdbms.mk".
Please help me/guide me in this install if it is at all possible.
Thanks and regards,
Mike

Did you read the installation docs?
Did you look up trying to do this on metalink before proceeding?

Installing Oracle Grid control 10G fails at OMS configuration on Windows XP

I am trying to install Oracle 10G Grid control and it fails at OMS configuration. The log file under cfgttool logs shows failed command as
Oracle.sysman.emcp.oms.Omsplugin -ConfigureOms.
I tried to run command manually like the following:
C:\OracleHomes\oms10g -force Oracle.sysman.emcp.oms.Omsplugin -ConfigureOms.
Whe I run this command nothing happens. How should I got about it. Thanks in advance.
Venkat

oracle.sysman.top.oms_<timestamp>log
has the following error messages and warnings.
[24-01-2011 13:45:21] Analyzing header for: C:/OracleHomes/oms10g/sysman/admin/emdrep/sql/core/latest/util/util_pkgdefs.sql
[24-01-2011 13:45:21]      Header: <create type="pkgdefs" pos="ip/webapps/ip_webapp_pkgdef.sql+"/>
[24-01-2011 13:45:21]      WARNING: Bad pos attribute in repmgr header.
[24-01-2011 13:45:21]      WARNING: Either there is a non-existent file: "ip/webapps/ip_webapp_pkgdef.sql" in position attribute: "ip/webapps/ip_webapp_pkgdef.sql+"
[24-01-2011 13:45:21]      WARNING: OR there is a bad repmgr header/no repmgr header in file: "ip/webapps/ip_webapp_pkgdef.sql"
At the end of the file:
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stderr:
'Enter Enterprise Manager Root Password :
************Enter Agent Registration password :
************Unable to connect to opmn.
Opmn may not be up.
================================================================================
opmn id=test-hv-ms2003e:6201
5 of 6 processes started.
ias-instance id=EnterpriseManager0.test-hv-ms2003e.teamqsi.com
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
HTTP_Server/HTTP_Server/HTTP_Server
Error
--> Process (pid=2476)
failed to start a managed process after the maximum retry limit
Log:
C:\OracleHomes\oms10g\opmn\logs\HTTP_Server~1
INFO: oracle.sysman.top.oms:setOmsSecure:OMS Service command=secure oms -secure_port 1159:returned:
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Performing Command=CMD /C C:\OracleHomes\oms10g\bin\emctl.bat secure lock
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:CMD /C C:\OracleHomes\oms10g\bin\emctl.bat secure lock have completed with exitCode=0
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stdout:
'Oracle Enterprise Manager 10g Release 10.2.0.2.0
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
Checking the security status of the OMS... Done.
Updating HTTPS Virtual Host for Enterprise Manager OMS... Done.
OMS Locked. Agents must be Secure and upload over HTTPS Port 1159.
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stderr:
INFO: oracle.sysman.top.oms:setOmsLocked:OMS Service command=secure lock:returned:
INFO: oracle.sysman.top.oms:configureOmsService:Oms Secure Configuration done.
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Performing Command=CMD /C C:\OracleHomes\oms10g\perl\5.6.1\bin\MSWin32-x86\perl.exe C:\OracleHomes\oms10g\sysman\install\precompilejsp.pl C:\OracleHomes\oms10g\j2ee\OC4J_EM\config\global-web-application.xml
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:CMD /C C:\OracleHomes\oms10g\perl\5.6.1\bin\MSWin32-x86\perl.exe C:\OracleHomes\oms10g\sysman\install\precompilejsp.pl C:\OracleHomes\oms10g\j2ee\OC4J_EM\config\global-web-application.xml have completed with exitCode=0
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stdout:
'precompiling the JSPs
precompiling the JSPs done
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stderr:
INFO: oracle.sysman.top.oms:configureOmsService:Precompile Jsps done.
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Performing Command=CMD /C C:\OracleHomes\oms10g\jdk\bin\java.exe -jar C:\OracleHomes\oms10g\sysman\jlib\emclikit.jar client -install_dir=C:\OracleHomes\oms10g\bin
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:CMD /C C:\OracleHomes\oms10g\jdk\bin\java.exe -jar C:\OracleHomes\oms10g\sysman\jlib\emclikit.jar client -install_dir=C:\OracleHomes\oms10g\bin have completed with exitCode=0
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stdout:
'Oracle Enterprise Manager 10g Release 10.2.0.2.0.
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
EM CLI client-side install completed successfully.
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stderr:
INFO: oracle.sysman.top.oms:configureOmsService:installAdditionalServices for 'client' completed=true
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Performing Command=CMD /C C:\OracleHomes\oms10g\bin\emctl.bat config agent updateTZ
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:CMD /C C:\OracleHomes\oms10g\bin\emctl.bat config agent updateTZ have completed with exitCode=0
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stdout:
'Oracle Enterprise Manager 10g Release 10.2.0.2.0
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stderr:
INFO: oracle.sysman.top.oms:configureOmsService:fixTimeZone completed=true
INFO: oracle.sysman.top.oms:OmsPlugIn:Requested Configuration Step 4 have been completed with status=true
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Performing Command=CMD /C C:\OracleHomes\oms10g\opmn\bin\opmnctl stopall
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:CMD /C C:\OracleHomes\oms10g\opmn\bin\opmnctl stopall have completed with exitCode=0
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stdout:
'opmnctl: stopping opmn and all managed processes...
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stderr:
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Performing Command=CMD /C C:\OracleHomes\oms10g\opmn\bin\opmnctl startall
INFO: oracle.sysman.top.oms:Start Opmn Error = CMD /C C:\OracleHomes\oms10g\opmn\bin\opmnctl startall
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:CMD /C C:\OracleHomes\oms10g\opmn\bin\opmnctl startall have completed with exitCode=206
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stdout:
'opmnctl: starting opmn and all managed processes...
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stderr:
'================================================================================
opmn id=test-hv-ms2003e:6201
5 of 6 processes started.
ias-instance id=EnterpriseManager0.test-hv-ms2003e.teamqsi.com
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
HTTP_Server/HTTP_Server/HTTP_Server
Error
--> Process (pid=2992)
failed to start a managed process after the maximum retry limit
Log:
C:\OracleHomes\oms10g\opmn\logs\HTTP_Server~1
INFO: oracle.sysman.top.oms:OmsPlugIn:Requested Configuration Step 5 have been completed with status=false
INFO: oracle.sysman.top.oms:EmcpPlug:invoke:Completed EmcpPlug invoke method on an aggregate=oracle.sysman.top.oms for Action=configuration in step=2:microstep=0
INFO: oracle.sysman.top.oms:The plug-in OMS Configuration has failed its perform method

What's the correct order to install OEM Grid Control + DB + AS?

Hi everbody! I'm getting start on OracleAS and Grid Control.
What's the correct order to install:
* Enterprise Manager 10g Grid Control
* Database 10gR2
* Application Server 10gR3
(on RHEL4-Upd2)
or the order is not important?
I need have the environment for each oracle software ($ORACLE_HOME, $ORACLE_BASE)? Or install first one, and change the environment and install, change again and install, etc.. ? :)
Tks!

Hey Rafael! You only have to use the Grid Control CDS, AS, repository database and grid control software are installed automatically, so you dont have to worry about the order u should have to follow.
Anyways if u have already installed a database u can use that one as a repository.
about the enviorment variables i guess u´ll be prompted for just one only directory cause u only need to install the software only one time.
hope u find this interesting!!
Regards, Luis

Error when trying to install OEM Grid Control 10.2.0.2 win32

Hi
I'm trying to install Oracle Enterprise Manager Grid Control release 2 for windows server 2003 32 bits, but the installation could not be completed.
I got the following error when OMS Configuration step is running.
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
The "C:\OracleHomes1\agent10g\cfgtoollogs\configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same
When I look into the configToolFailedCommands log file, the are any more information regard the issue.
Best Regards
ARmando

My server that was running that version had crashed, so I'm trying to install it again.
I have EBS 12.0 and 10g DB that I usually monitored with Grid Control.
What version do you recommend me?
Regards

Installing OEM Grid Control on Solaris Sparc using an existing database

During installing OEM 10g on Solaris, after select "using an existing database" the connect string for database (host:port:sid) never is solicited and the path for datafiles neither, then the installation cancel.
On Windows, this type of installation in the same version work fine!
1_ How I do to install OEM 10g on Solaris using an existing db?
Tx,
Diego.

Have you installed the Management Agent for the target database?

Install grid control 10g Server 2003

Hello all;
I have installed Oracle Grid control 10G on my PC ( server 2003 ) , the installation continued until I found it is paused on OMS Configuration and gave me the following message :
Configuration assistant "OMS Configuration" failed
The "C:\grid_conrol_home\agent10g\cfgtoollogs\configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------
I looked at "C:\grid_conrol_home\agent10g\cfgtoollogs\configToolFailedCommands" file and I found :
oracle.sysman.emcp.agent.AgentPlugIn
the file OMS_HOST/sysman/logs/emoms.log
2011-04-04 09:30:20,250 [Thread-18] WARN jdbc.ConnectionCache _getConnection.353 - Got a fatal exeption when getting a connection; Error code = 17002; Cleaning up cache and retrying
2011-04-04 09:30:20,250 [Thread-18] ERROR em.notification unregisterOMS.1417 - Error unregistering: Exception d'E/S: SO Exception was generated
java.sql.SQLException: Exception d'E/S: SO Exception was generated
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:174)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:286)
     at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:327)
     at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:433)
     at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:150)
     at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:31)
     at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:571)
     at oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:217)
     at oracle.jdbc.pool.OracleConnectionPoolDataSource.getPhysicalConnection(OracleConnectionPoolDataSource.java:108)
     at oracle.jdbc.pool.OracleConnectionPoolDataSource.getPooledConnection(OracleConnectionPoolDataSource.java:76)
     at oracle.jdbc.pool.OracleImplicitConnectionCache.makeCacheConnection(OracleImplicitConnectionCache.java:1331)
     at oracle.jdbc.pool.OracleImplicitConnectionCache.getCacheConnection(OracleImplicitConnectionCache.java:422)
     at oracle.jdbc.pool.OracleImplicitConnectionCache.getConnection(OracleImplicitConnectionCache.java:330)
     at oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:285)
     at oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:178)
     at oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:158)
     at oracle.sysman.util.jdbc.ConnectionCache._getConnection(ConnectionCache.java:359)
     at oracle.sysman.util.jdbc.ConnectionCache._getConnection(ConnectionCache.java:322)
     at oracle.sysman.util.jdbc.ConnectionCache.getUnwrappedConnection(ConnectionCache.java:575)
     at oracle.sysman.emSDK.svc.conn.FGAConnectionCache.getFGAConnection(FGAConnectionCache.java:207)
     at oracle.sysman.emSDK.svc.conn.ConnectionService.getSystemConnection(ConnectionService.java:1303)
     at oracle.sysman.emdrep.notification.NotificationMgr.unregisterOMS(NotificationMgr.java:1408)
     at oracle.sysman.emdrep.notification.NotificationMgr.destroy(NotificationMgr.java:1867)
     at oracle.sysman.emSDK.svc.ServiceUtil.cleanupServices(ServiceUtil.java:212)
     at oracle.sysman.eml.app.ContextInitializer.contextDestroyed(ContextInitializer.java:851)
     at com.evermind.server.http.HttpApplication.destroy(HttpApplication.java:5980)
     at com.evermind.server.http.HttpSite.destroy(HttpSite.java:936)
     at com.evermind.server.http.HttpServer.destroy(HttpServer.java:632)
     at com.evermind.server.ApplicationServer.destroy(ApplicationServer.java:2102)
     at com.evermind.server.ApplicationServerShutdownHandler.run(ApplicationServerShutdownHandler.java:39)
     at java.lang.Thread.run(Thread.java:534)
the file installAction.log
Start Processing configuration tool Enterprise manager Website Configuration Assistant ....
Preparing for copying C:\OracleHomes\oms10g\sysman\log\* to C:\OracleHomes\oms10g\cfgtoollogs
Expanding source path C:\OracleHomes\oms10g\sysman\log\*
Adding the file C:\OracleHomes\oms10g\sysman\log\emctl.log from the file path expanding...
Adding the file C:\OracleHomes\oms10g\sysman\log\emdctl.log from the file path expanding...
Adding the file C:\OracleHomes\oms10g\sysman\log\emdctl.trc from the file path expanding...
Adding the file C:\OracleHomes\oms10g\sysman\log\emoms.log from the file path expanding...
Adding the file C:\OracleHomes\oms10g\sysman\log\emoms.trc from the file path expanding...
Adding the file C:\OracleHomes\oms10g\sysman\log\pafLogs from the file path expanding...
Completed copying file C:\OracleHomes\oms10g\sysman\log\emctl.log to C:\OracleHomes\oms10g\cfgtoollogs\emctl.log
Completed copying file C:\OracleHomes\oms10g\sysman\log\emdctl.log to C:\OracleHomes\oms10g\cfgtoollogs\emdctl.log
Completed copying file C:\OracleHomes\oms10g\sysman\log\emdctl.trc to C:\OracleHomes\oms10g\cfgtoollogs\emdctl.trc
Completed copying file C:\OracleHomes\oms10g\sysman\log\emoms.log to C:\OracleHomes\oms10g\cfgtoollogs\emoms.log
Completed copying file C:\OracleHomes\oms10g\sysman\log\emoms.trc to C:\OracleHomes\oms10g\cfgtoollogs\emoms.trc
Number of file(s) copied is 5
Number of directories copied is 0
End Processing configuration tool Enterprise manager Website Configuration Assistant
Start Processing configuration tool DCM Repository Backup Assistant ....
Preparing for copying C:\OracleHomes\oms10g\dcm\logs\* to C:\OracleHomes\oms10g\cfgtoollogs
Expanding source path C:\OracleHomes\oms10g\dcm\logs\*
Adding the file C:\OracleHomes\oms10g\dcm\logs\daemon_logs from the file path expanding...
Adding the file C:\OracleHomes\oms10g\dcm\logs\dcmctl_logs from the file path expanding...
Adding the file C:\OracleHomes\oms10g\dcm\logs\emd_logs from the file path expanding...
Number of file(s) copied is 0
Number of directories copied is 0
End Processing configuration tool DCM Repository Backup Assistant
INFO: Le script "C:\OracleHomes\agent10g\cfgtoollogs\configToolFailedCommands" contient toutes les commandes qui ont échoué, ou qui ont été ignorées ou annulées. Ce fichier peut servir à exécuter ces assistants de configuration en dehors d'OUI. Vous pouvez être amené à mettre à jour ce script avec les mots de passe (éventuels) avant de l'exécuter.
INFO: Created a new file C:\OracleHomes\oms10g\cfgtoollogs\configToolFailedCommands
INFO: Since the option is to overwrite the existing C:\OracleHomes\oms10g\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is C:\OracleHomes\oms10g\cfgtoollogs\configToolFailedCommands.bak
INFO: Created a new file C:\OracleHomes\agent10g\cfgtoollogs\configToolFailedCommands
INFO: Since the option is to overwrite the existing C:\OracleHomes\agent10g\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is C:\OracleHomes\agent10g\cfgtoollogs\configToolFailedCommands.bak
GRAVE: OUI-25031 : Echec de certains assistants de configuration. Il est vivement recommandé de les relancer immédiatement. Une exécution incorrecte d'un assistant marqué comme Recommandé signifie que le système est mal configuré.
1. Dans le panneau Détails de l'écran de l'assistant de configuration, consultez les erreurs à l'origine des échecs détectés.
2. Corrigez ces erreurs.
3. Sélectionnez les assistants ayant échoué et cliquez sur le bouton Réessayer pour les relancer.
INFO: Sélection utilisateur : Oui/OK
file hosts
127.0.0.1 localhost.localdomain localhost
192.168.2.195 srvmid1.com.tn srvmid1
please you ca help me...

Check if the last post in http://cn.forums.oracle.com/forums/thread.jspa?threadID=477659&tstart=0&start=15 can be the solution for you. Remember, the error is in the last step of the configuration process. So it only concerns the agent. The OMS and OMR were (as I see it) correctly configured.
Eric

Oracle Grid control 10G R2 failed

Hello all;
I just have installed Oracle Grid control 10G R2 on my PC ( xp sp2 ) , the installation continued until I found it is paused on OMS Configuration and gave me the following message :
Configuration assistant "OMS Configuration" failed
The "C:\grid_conrol_home\agent10g\cfgtoollogs\configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------
I looked at "C:\grid_conrol_home\agent10g\cfgtoollogs\configToolFailedCommands" file and I found :
oracle.sysman.emcp.agent.AgentPlugIn
Can you please help me in this issue .
Regards,

Have a look at the logs at:
C:\grid_control_home\agent10g\cfgtoollogs\omsca
FJFranken

Install of OEM Grid Control on 10g RAC

Hi,
I try to install OEM Grid Control 10.1.0.3 on a 10G 10.1.0.2 database with ASM and RAC installed, on windows.
At the step of choosing the product to install, i would like to choose 'OEM GC using an existing database' or 'Additional management service 10.1.0.3', but it fails.
The reason is 'you cannot install OEM on a hardware cluster'.
I have no idea how to resolve that, do i have to change my RAC installation ?
thank you for your answer,
Isabelle

To install on RAC, you install using an existing database and then specify the sid/hostname for ONE instance in the RAC.
Once the management repository has been sucessfully installed and the mid-tier is up, you can edit emoms.properties to modify the JDBC url the application uses to connect to the database to be RAC aware.
The are a number of pre-installation requisites for an existing database to be used as a destination for a repository installation, there are both documents on metalink on the subject and the basic installation guide references pre-requisites for existing databases.

Installing Oracle10g Grid Control - - - management service hostname

Oracle 11g R1 RHEL 4 64bit
Grid Control 10.2.0.4
HI All,
I am installing the Oracle agent and when I get to the 'Specify Oracle Management Service Location' screen it asks for the 'Management Service Host Name'. Is this the same as my database server hostname? I'm not sure what to put here. When I do put the database server hostname in, then it says it can't locate port 4889 on that server. However, if you keep going through the install everything succeeds in the end. BUT, when I go to the link http://<management_service_hostname>:4889/em then nothing shows up. I am new with grid control. Anyone have any ideas?
Thanks.

Great. Thanks for your reply Bobcatalog!
Now I just want to get this all cleared up before I proceed with the installation. So here is what I am thinking of doing and please tell me if I am wrong, missing something or should do it another way.
1. Install OEM Grid Control 10.2.0.3 on a new host (server) which has nothing on it (i.e. no Oracle products - - - clean host) and then patch it to 10.2.0.4.
- I will use the create new database option, which will create the EM Repository database
- I will (or it will) install the OMS as well as the OMA (Oracle management Agent)
(Question: Should I install OEM Grid Control on just a regular filesystem or use ASM with it? I heard that there are issues with using ASM. If it will increase my chances of failure, then I will stay away from it...even though all our environments (DEV, PROD, QA) use ASM.
2. Install the OMA agent on each of the database servers (which are called 'targets') that I want to monitor.
And that is all that I will need to do, correct?
Thank you.

OMS Configuration Failed In the Process of Installing OEM Grid Control 10g

Similar Messages

Maybe you are looking for