Oms for oem

hi,
I could not start oms in NT "services". error 997 says overlapped i/o operation is in progress. i've never met this error before. thanks for help.
bob

With the way our environment is set up, no one person will consistently know the sysman password for a long period of time. So if anyone "Checks out" that ID and password, they need to split it with another person so neither person knows it before they "check it in." So that means someone would have to manually do that every time we run that exportconfig command, which would be very time consuming. If there was some way to use a wallet or named credential, we wouldn't have to worry about doing that, but the other topic I made confirmed that that is not possible.
If all it does is make a zip file, could I not just manually copy the same files it collects, and then when I need to recover, copy those same files back to their original locations?

Similar Messages

Certified Targets for OEM 10.2 releases

I have few questions on the certified targets for OEM 10.2.0.4
What versions of Oracle Databases can be monitored using the EM 10.2.0.4?
Also are there any drawbacks in monitoring the older versions of oracle viz 9.2 or 9i rel 1 version databases ?
Can we monitor 11g databases with the 10.2.0.4 EM environment?
Also, We have been getting Alerts from the Grid Setup when we have the Agent 10.2* running to monitor 9.2* release database
Message=Agent is Unreachable (REASON = Connection refused). Host is unreachable (REASON = Timed out pinging the host for EMD
Do you know what could be the reason for this Alert when i see everything is up and running..
Let me know if you'l had similar problems/Bugs or fixes applied to remediate this problem
Thanks

1. For certification See Note 412431.1 Oracle Enterprise Manager 10g Grid Control Checker.
2. For the alerts it seems that sometimes OMS unable to ping the agent box to get the availability of the Agent/host,
OMS monitors by verifying agent over HTTP and host over ICMP.
BR,
MettoMorphism

MAA for OEM

I was reading the white paper on Maximum Availability Architecture for OEM, everything is pretty clear for one portion and I need to get clarification:
1. For repository, we can use Data Guard,
2. SLB, we can have global SLB so one site goes out, the other will pick up the work
3. OMS: Oracle recommened to use Share Loader Storage for both site, this throw me off a little b/c where is the Share Loader Storage will be physically located? Obviously, it had to locate on one site, what if hurricance hit that site and wipe out Shared Loader Storage?
Has anyone implemented this architect before?
Thanks

Please describe in more detail your planned setup. For example
Main Site
   SLB
   OMS 1
   OMS 2
   Shared NFS
   OMR
      RAC Node 1
      RAC Node 2
DR Site
   SLB
   OMS
   OMR (Data Guard)
1. For repository, we can use Data Guard, Yes
2. SLB, we can have global SLB so one site goes out,
the other will pick up the workYes
3. OMS: Oracle recommened to use Share Loader
Storage for both site, this throw me off a little b/c
where is the Share Loader Storage will be physically
located? Obviously, it had to locate on one site,
what if hurricance hit that site and wipe out Shared
Loader Storage?The shared loader storage should be in your primary site. If you are implementing a Global Load Balancer then you need to make sure that this is also replicated to the DR site.
I think what you have described is;
SLB
   Main Site
      OMS 1 (Active)
      Upload (Some file system)
      OMR
         RAC Node 1 (Active)
         RAC Node 2 (Active)
   DR Site
      OMS 2 (Active)
      Upload (Replicated files system)
      OMR (Data Guard, Physical Standby)
Is this correct?

What is the alternative of F5 BIG-IP LTM Load Balancer for OEM 12c

We want to implement service load balance, however oracle recommended
F5 BIG-IP LTM Load Balancer for OEM 12c
How much it is cost? and is there any free alternative we can use which supported by Oracle?
Thanks

Apart from F5, Cisco is another SLB vendor. I am not sure about any free alternative though.
Note that regardless what SLB that you pick, it should meet the requirements documented in section 29.3.2.2 of the EM12c Release 3 Administrator's Guide:
The SLB must provide support for multiple virtual server ports. Enterprise Manager typically requires that up to 4 ports are configured on the SLB (Secure Upload, Agent Registration, Secure Console, Unsecure Console)
Support for persistence. HTTP and HTTPS traffic between the browser and the OMS requires persistence
Support for application monitoring. The SLB must be capable of monitoring the health of the OMSs and detecting failures, so that requests will not be routed to OMSs that are not availa
Regards,
- Loc

VMS for OEM : Production Order

Hi All,
VMS has all the features required for Automobile Importers. In the 'Make to Stock - Scenario ' , we can create vehicle , purhcase order and get vehicle from the Vendor . But implementing VMS for OEM is not that simple.
Could any VMS expert advise the best solution for the given below scenario.
Client : An Automobile manufacturer
Scenario: "Make to stock" : Manufactured in the Production Centre of the same company ( kindly note vehicle it is not purchased from vendor ).
I need to create Production order to manufacture a vehicle .
The solution I found here is
a) Create Vehicle
2) Create Purchase Order
3) Create a resevation Sales Order
4) Run MRP , get planned Order
5) Planned Order converted to Production Order.
Please advise anyone has better approach.
Thanks and Regards
Tom Cruiser

Tom,
it's easy to implement a new ordering system based on SAP VMS . I've seen some customers who did that .... and all had different approaches. Some were complex, some were suprisingly easy.
It depends .... it really depends on the complete scenario at the customer. Is the customer going to run the production process in the same SAP box? Or is production going to be in searate systems and the VMS is used to "just" handle all vehicles as a central instance?
Your described process is one way, esp. if all is in one box.
An other way is to send vehicle details to the (e.g. model-based selected) production system, and manage the purchase (doc flow) when the vehicle is finished and being moved out of production stock.
Other experiences?
Tell us!
Ute

Do we have any certification for OEM -grid control ?

Do we have any certification for OEM -grid control ?

There is currently no OEM grid control certification and currently no plans to build one. You can stay up-to-date on new and upcoming Oracle releases on our website at http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=224.
Regards,
Brandye Barrington
Certification Forum Moderator
Certification Program Manager

Good tutorial for plugin for oem

I'm looking for a good tutorial for building a plugin (cep actually ..) for oem.
All the docs I found are not very clear to me.
Does anybody know where can I found one?
Or maybe some good examples besides those which comes with the zip file
Thanks.

Refer this: http://docs.oracle.com/cd/E24628_01/doc.121/e24473/plugin_mngr.htm#CHDBGHFE

RAC environment setup for OEM Grid Control

Hi All,
One of my customer is setting up RAC environment for OEM Grid Control, he has following questions.
1) Can I use the DirectNFS client on each RAC node to mount SAN storage created with an OCFS2 filesystem?
2) Can I use the DirectNSF client to mount the shared filesystem loader directory?
3) Should I be using DirectNFS for the shared filesystem loader at all? Or should I just use a normal Linux NFS mount?
4) Is OCFS2 preferred over NFS for the shared filesystem loader?
Any information is highly appriciated.
Thank you,
Bhavin

Please check the below doc
http://www.oracle.com/technology/deploy/availability/pdf/MAA_WP_10gR2_EnterpriseManagerBestPractices.pdf

Sybase plugin install for oem 12c

Hi, does anyone have the steps for installing sybase agent for oem cloud control 12c. The installation guides talk only about the installation of oracle agents. I want to know how we can install sybase agent in grid control 12c.
Thanks

I found the below link which sort of explains what I am trying to accomplish, hope this helps. I will write again, once I am successful with my problem.
https://docs.google.com/viewer?a=v&pid=gmail&attid=0.1&thid=13d4ba79e39d4a82&mt=application/pdf&url=https://mail.google.com/mail/u/0/?ui%3D2%26ik%3D56a210ce37%26view%3Datt%26th%3D13d4ba79e39d4a82%26attid%3D0.1%26disp%3Dsafe%26realattid%3Df_he1se6gp0%26zw&sig=AHIEtbTHNBFEOll7jZxX3O4nLHIuPOpS-A

Database for OEM repository

Hi All,
Greetings...
I have a question.
Can it be possible to use Oracle XE for OEM repository and what about other editions like Standard also can be used?
Please help me to conclude my requirement for an Oracle Enterprise Manager Cloud Control 12c Release 3 (12.1.0.3) installation on winx64.
regards,
Noushad

If you are looking to purchase Oracle Enterprise Manager Cloud Control 12c it requires an Oracle database for the repository which would be included in the license so you do not need to worry about the database version. Note if you were to use the the repository database for something other then the OEM repository this would require a database license.
You can confirm this information with your Oracle Rep or review the OEM license information.

MIB for OEM

Can some send me a sample MIB for OEM snmp-trapping?

See here :
http://download.oracle.com/docs/cd/B16240_01/doc/em.102/e10954/notification.htm#sthref1130

NetApp plugin for OEM 12c - DB is not on NFS mounted storage. DB Storage Perf Report empty

Hi, I have installed NetApp Plugin for OEM 12c (12.1.0.3.1) for a Netapp vFiler used for SMO. "Database Storage Utilization" and "Consolidation Database Storage Performance" empty. "Database is not on NFS mounted storage. Hence, no views available." - a. We are using ASM lun created on NFS. Does this means it will not appear in the plugin report ? - b. If point a. is true, is there a way to make the data appear ? I had already verified the BELOW. Only for point 4, I observed MGMT$DB_DATAFILES."OS_STORAGE_ENTITY" is NA (even though the ASM disk is actually on a NFS mount) : 1. Database discovery is done in EM12c . 2. Go to the database “HOST” target in EM 12c and click on the host target on which database resides. From host target drop down, click on “Host-> StorageDetails”. It will launch the “Storage Details” page. Please refer attached screenshot. There is a table displayed on bottom of screen and click on “File Systems” tab and check that your discovered database storage mount point is shown there. (Please note that whenever you define new mount point on host, this list should reflect the change.), otherwise, Database Performance views will not work. This mount point discovery is updated periodically. (It might be possible that DB views are not working because this discovery might not have finished) 3. Please click on NetApp Storage Target type and go to “Target HomePage drop down ->All Metrics”. Please click on “Volume List” metric and confirm if the volume is listed there on which database resides. 4. If all above steps holds good, please execute the below query on EM 12c repository and send the result: SELECT V2.TARGET_NAME, V1.FILESYSTEM, SUBSTR(V1.FILESYSTEM,INSTR(V1.FILESYSTEM,':')+6, (CASE WHEN (INSTR(V1.FILESYSTEM,'/',1,3) > 0) THEN INSTR(V1.FILESYSTEM,'/',1,3) - INSTR(V1.FILESYSTEM,'/',1,2) - 1 ELSE 100 END)) "VOLUMENAME" FROM MGMT$STORAGE_REPORT_NFS V1, MGMT$DB_DATAFILES V2 WHERE V1.MOUNTPOINT = V2.OS_STORAGE_ENTITY and V2.TARGET_NAME=''

Hi Aik, Change in SQLs will not work. There is lot of code for data discovery.We need to have discovery mechanism integrated in our plug-in for ASM LUNS.ASM LUN based database discovery has been planned to support in future release of plug-ins. Can you please share following details about OEM plug-in usage:1. Company Name2. ONTAP OS (cDOT / 7-mode which version)3. Nature of Databases (Only ASM or NFS based)4. Are your currently using this plug-in for NFS databases? If yes, how it helps to simplify your database administration. We will share your feedback to Product Management for support of ASM. Regards,Sachin Maheshwari

Need installation document for OEM 11G on windows 2003(32 bit).

Hi,
As a part of my project, i need to install the OEM 11G on windows 2003(32 bit) machines and targets also windows 2003. there i need to install again agent 11g(11.1.0.1) and target DB is 10.2.0.4.
I have done the installation of OMS successfully and installed the agent 11g on target as well. i am facing challeges in configuring the database from OMS. i tried couple of options but nothing is working out. Finally i decided to cross check the installation procedure once again with the previously completed ones. could any body share the same.
in breif i have done following.
1) installed RDBMS 11G on OMS server.
2) insalled java 1.6.18.
3) installed WLS 10.3.2
4) installed the OMS 11G(11.1.0.1)
On agent side i installed agent 11g(11.1.0.1) to monitor a database which is of 10.2.0.4 version.
agent,listeners are reflecting on OMS with up status but DB is showing as "metric collection error". i tried all the possible options like removing and reconfiguring and agent clearing and agent restart etc...but no use. also i in the Oracle installation document, they mentioned as we need to set user equavelence between OMS and agent server but not sure of this, which i have not done. is this compulsary?
Sorry for putting all the things in one single thread.
Thanks in-advance.
Regards
DBA.

Did you check if the database is configured in GC?
If you can't connect using sqlplus to the user dbsnmp make a connection to the database: alter user dbsnmp identified by <password> account unlock;
In GC go to Targets, All Targets select the DB concerned and hit Configure. Enter the dbsnmp user password etc. After a while you will see the result: DB shows Up (I hope)
Eric

Cold Backup / Recovery for OEM Grid

Hi friends,
OEM 10.2.0.5
RHEL 4.6
How do you Clone or Backup OEM Grid (Management server(OMS) , agent, and repository database)?
in case of disaster?
They are all under our server dir /home/oracle. If I have a backup of my /home/oracle on external tape or disk,
and ithappened that my OEM server crashed and it can not be fixed anymore. Then we buy another server
with the same specs and OS. Then copy/download the backup. How can I start it up? Just like the original setup?
Thanks a lot.
Ms K

ytterp2009 wrote:
thanks :)
So, I dont need the local OEM anymore ;)
Yes ..
By the way, does the agent keep backup of its gathered data? Or does it delete them automatically after it is sent
to the OMS server? I am afraid that my agent disk space will get full.
Does agent use oracle tables to keep data? or just text filesAgent gathers data and stores it in form of xml in $AGENT_HOME/sysman/upload and sends these xml to OMS and deletes them automatically.In OMS they are stored at $OMS_HOME/sysman/recv . Then these xmls are processed by loader and get loaded into repository DB and deleted automatically from directory.
By default your agent can store data upto 50 MB and once it is full then your agent will stop working. Check out parameters in $AGENT_HOME/sysman/config/emd.properties file.
please check :
http://racdba.wordpress.com/2009/12/05/oem-agent-common-errors/
How do I know what time/schedule or how frequent does the agent updates our OMS server?
How often does the agent gathers data from the managed database?It depends on the frequency of metric applied for the target.
Please read :
Enterprise Manager Grid Control Agent 10g, Process Control (Start, Stop & Status) Troubleshooting Guide [ID 548928.1]
Understanding the Enterprise Manager 10g Grid Control Management Agent, Directory Structure and Key Configuration Files. [ID 234872.1]
Regards
Rajesh

Which version of DB for OEM Grid 12c is stable?

Hello friends.
My intention is to set up a new OEM Grid 12C OMS installation.
This will be for a relatively small number of databases, approx. 40 or 50, mixture of production and test/dev.
I intend on having the OEM repository database on the same server (or VM) as the OMS software.
I've done it this way in the past and it works fine without any resource contention (regardless what Oracle recommends).
The question I have is if I set up the OMS 12c, what is the latest and most stable (recommended) version of database to use for the OEM repository database.
My initial thoughts were to use 11.2.0.4 EE, because I'm not crazy about using the first version of an Oracle database release (i.e., 12.1).
In the past, for every version I can remember going back to v.6, the second release resolved all the major issues with the first release, and also included new features that didn't make it into the first release.
My installation will be on a VM running Redhat Linux 6.4.
Thank you in advance...
I've found the OEM forum and moved this message to the OEM forum.

If your OMS is installed on a host that is protected by a firewall and the Management Agents that provide management data are on the other side of the firewall, you must perform the following tasks:
Configure the OMS to use a proxy server for its communications to the Management Agents.
Configure the firewall to allow incoming HTTP traffic from the Management Agents on the Management Repository upload port.
Check this documentation link below, it will help you. " Configuring EM for firewalls"
http://docs.oracle.com/cd/E24628_01/install.121/e24089/firewalls.htm#BEIEJCGC

Oms for oem

Similar Messages

Maybe you are looking for