Oms in oracle 11g
Hi,
I am asked to install oracle 11.2 and OMS.
I don't have any idea about OMS.
How to configure that?
Can i install and configure 11g and OMS in same machine(Vm ware).
can i use the OMS for testing purpose?
please anyone tell about download path for OMS.
In oracle 9i ,OMS comes with Database software pack or separate pack?
Edited by: user3266490 on Mar 29, 2010 7:28 PM
Hi,
Thanks for reply.what is the difference between OMS and Agent in Grid.
both are comes same software/download or separate?
If OMS/Agent is separate means, shall i place in two different machines like windows(OMS),Linux(Agent)?
I red the meta link 412431.1 which says OMS supports oracle 11.1.0.6 , 11.1.0.7(but we have oracle 11.2).
But Agents supports oracle 11.1.0.6 , 11.1.0.7,11.2.0.1 ( Note 953846.1).
what are the patches i have to apply for oracle 11.2?
Similar Messages
-
Oracle 11g OMS: Database Instance Home Tab: Page Refreshed Timezone Issue
Hi all...I've searched the forums and search engines for specific information on this issue, but have not seen a viable solution so far. We have Oracle 11g Grid Control 11.1.0.1
installed on a Solaris V490 using Solaris 10, with an Oracle 11.2.0.1 database.
The Database instance Home tab for all 50+ databases shows the date and time of the 'Page Refreshed' in GMT. The OS and the Agent software both are configured
with the TZ set to US/Eastern. All other page displays e.g. Performance, Availability for Data Guard Standby etc. all show the refreshed time in EDT, it is ONLY
the Home tab for the instance that has the GMT format.
I have not seen any threads or other information that describes specifically how to correct this or even to change it. There are many related posts about the Agent
end.properties, the OS /etc/timezone configuration parameters, the TZ environment variable etc. but in my case they are all set properly.
Does anyone have any additional ideas or suggestions or knowledge about how , or even whether, this can be resolved?
Thanks!
DPHsqlplus ... Connected to an idle instance.That means the database you're trying to connect with is offline, thus the:
ORA-01034: ORACLE not availableNo big surprise there, instance (that you're trying to connect with) is offline.
First, make sure the service OracleServiceXE for the database is running, see the services applet, Start/Run/services.msc and if it does not show "Started" hit the Start button with the OracleServiceXE selected.
sqlplus sys/admin@XE as sysdbaThat connection attempt uses sqlnet to the XE tnsalias. If you're on the database host the ...@XE part is not needed, better to use:
$ sqlplus /nolog
connect /as sysdba;
... Connected. #if its running
-- or use:
$ sqlplus
... username: sys as sysdba
... password ...
Connected.
-- also try
$ sqlplus system
... password: ....
Connected.
select name from v$database;
...That also assumes the environment/registry entries have been configured correctly.
tnsping XE ... Attempting to contact [tnsalias connect details] ... OK (10 msec)That tells you the listener is running. It does not mean anything more than your listener is running at the host and port specified for your tnsalias are correct. It does not attempt an actual database connection. So if the database is offline but the listener is running a tnsping will not identify that particuler "problem".
lsnrctl status ... Endpoints Summary ... PROTOCOL=tcp)(HOST=chilakamarthy)(PORT=1521)))...That bit of info also verifies the listener is running. Again, check your services.msc applet make sure the service shows Started.
Edited by: clcarter on Jun 7, 2012 2:15 PM
clarify tnsping -
Dbconsole start failed on Oracle 11G
After installing Oracle 11G and creating a new database, I have created new db console reporsitory, with the commands:
set ORACLE_SID
set ORACLE_HOME
set SYS_PWD
set PORT
emca -repos create -silent -SID $ORACLE_SID -ORACLE_HOME $ORACLE_HOME -SYS_PWD $SYS_PWD -DBSNMP_PWD $SYS_PWD -SYSMAN_PWD $SYS_PWD -PORT $PORT
emca -config dbcontrol db -silent -SID $ORACLE_SID -ORACLE_HOME $ORACLE_HOME -SYS_PWD $SYS_PWD -DBSNMP_PWD $SYS_PWD -SYSMAN_PWD $SYS_PWD -PORT $PORT
At the end, the command fails:
INFO: This operation is being logged at /exec/products/oracle/cfgtoollogs/emca/HYDRA/emca_2008_09_22_22_25_54.log.
Sep 22, 2008 10:26:41 PM oracle.sysman.emcp.util.DBControlUtil stopOMS
INFO: Stopping Database Control (this may take a while) ...
Sep 22, 2008 10:26:44 PM oracle.sysman.emcp.EMReposConfig uploadConfigDataToRepository
INFO: Uploading configuration data to EM repository (this may take a while) ...
Sep 22, 2008 10:27:13 PM oracle.sysman.emcp.EMReposConfig invoke
INFO: Uploaded configuration data successfully
Sep 22, 2008 10:27:16 PM oracle.sysman.emcp.util.DBControlUtil configureSoftwareLib
INFO: Software library configured successfully.
Sep 22, 2008 10:27:16 PM oracle.sysman.emcp.EMDBPostConfig configureSoftwareLibrary
INFO: Deploying Provisioning archives ...
Sep 22, 2008 10:27:21 PM oracle.sysman.emcp.EMDBPostConfig configureSoftwareLibrary
INFO: Provisioning archives deployed successfully.
Sep 22, 2008 10:27:21 PM oracle.sysman.emcp.util.DBControlUtil secureDBConsole
INFO: Securing Database Control (this may take a while) ...
Sep 22, 2008 10:27:32 PM oracle.sysman.emcp.util.DBControlUtil secureDBConsole
INFO: Database Control secured successfully.
Sep 22, 2008 10:27:32 PM oracle.sysman.emcp.util.DBControlUtil startOMS
INFO: Starting Database Control (this may take a while) ...
Sep 22, 2008 10:30:40 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
WARNING: Error executing /exec/products/oracle/v11.1.0/bin/emctl start dbconsole
Sep 22, 2008 10:30:40 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Error starting Database Control
Refer to the log file at /exec/products/oracle/cfgtoollogs/emca/HYDRA/emca_2008_09_22_22_25_54.log for more details.
Could not complete the configuration. Refer to the log file at /exec/products/oracle/cfgtoollogs/emca/HYDRA/emca_2008_09_22_22_25_54.log for more details.
When I want to start dbconsole manually, I have the following error:
emctl start dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.1.0.6.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
https://RD_x3650_22:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 11g Database Control ............................................................................................. failed.
Logs are generated in directory /exec/products/oracle/v11.1.0/RD_x3650_22_HYDRA/sysman/log
The logs give the following message:
emdctl.trc:
2008-09-23 00:19:32 Thread-3083821984 ERROR http: 5: Unable to initialize ssl connection with server, aborting connection attempt
2008-09-23 00:19:32 Thread-3083813792 ERROR ssl: Open wallet failed, ret = 28750
2008-09-23 00:19:32 Thread-3083813792 ERROR ssl: nmehlenv_openWallet failed
2008-09-23 00:19:32 Thread-3083813792 ERROR ssl: Error initializing SSL
2008-09-23 00:19:32 Thread-3083813792 ERROR http: 5: Unable to initialize ssl connection with server, aborting connection attempt
2008-09-23 00:19:32 Thread-3083813792 ERROR main: nmectla_agentctl: Error connecting to https://RD_x3650_22:3872/emd/main. Returning status code 1
emoms.trc:
2008-09-22 23:07:08,275 [OC4J Launcher] ERROR app.ContextInitializer contextInitialized.479 - Integration Class not found: oracle.sysman.pp.ec.ui.intg.ExtendClusterIntegration
2008-09-22 23:07:08,276 [OC4J Launcher] ERROR app.ContextInitializer contextInitialized.479 - Integration Class not found: oracle.sysman.pp.dn.ui.intg.DltNodeIntegration
2008-09-22 23:07:08,277 [OC4J Launcher] ERROR app.ContextInitializer contextInitialized.479 - Integration Class not found: oracle.sysman.pp.common.ui.intg.ProvCommonIntegration
emagent.log:
2008-09-22 23:06:59 Thread-3083801408 EMAgent started successfully (00702)
2008-09-22 23:14:56 Thread-3083817792 Starting Agent 10.2.0.3.0 from /exec/products/oracle/v11.1.0 (00701)
2008-09-22 23:14:57 Thread-3083817792 [Database Instance] InstanceProperty (DBVersion) is marked OPTIONAL but is being used (00506)
2008-09-22 23:14:57 Thread-3083817792 [Cluster Database] InstanceProperty (DBVersion) is marked OPTIONAL but is being used (00506)
2008-09-22 23:14:57 Thread-3083817792 [Load Balancer Switch] InstanceProperty (snmpTimeout) is marked OPTIONAL but is being used (00506)
2008-09-22 23:14:58 Thread-3083817792 EMAgent started successfully (00702)
2008-09-23 00:14:00 Thread-3083813696 Starting Agent 10.2.0.3.0 from /exec/products/oracle/v11.1.0 (00701)
2008-09-23 00:14:01 Thread-3083813696 [Database Instance] InstanceProperty (DBVersion) is marked OPTIONAL but is being used (00506)
2008-09-23 00:14:01 Thread-3083813696 [Cluster Database] InstanceProperty (DBVersion) is marked OPTIONAL but is being used (00506)
2008-09-23 00:14:01 Thread-3083813696 [Load Balancer Switch] InstanceProperty (snmpTimeout) is marked OPTIONAL but is being used (00506)
2008-09-23 00:14:03 Thread-3083813696 EMAgent started successfully (00702)
I've tried this:
- set correctly TIMEZONE,
- configure secure dbconsole (emctl secure dbconsole),
- stop service nscd,
- change the port number,
- recreate the repository....
But the problem still occurs...
Has someone another idea?
Thank You
Anneemctl secure agent does not exist with Oracle 11G
I tried:
emctl secure dbconsoleOracle Enterprise Manager 11g Database Control Release 11.1.0.6.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
[https://RD_x3650_22:5500/em/console/aboutApplication|https://rd_x3650_22:5500/em/console/aboutApplication]
Please enter repository password:
DBCONSOLE already stopped... Done.
Agent is already stopped... Done.
Securing dbconsole... Started.
Securing dbconsole... Sucessful.
But the dbconsole starting still have errors
The command status gives:
emctl status agent -secureOracle Enterprise Manager 11g Database Control Release 11.1.0.6.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Checking the security status of the Agent at location set in /exec/products/oracle/v11.1.0/RD_x3650_22_HYDRA/sysman/config/emd.properties... Done.
Agent is secure at HTTPS Port 3938.
Checking the security status of the OMS at [http://RD_x3650_22:5500/em/upload/..|http://rd_x3650_22:5500/em/]. Done.
OMS is running but has not been secured. No HTTPS Port available.
And the command "emctl ssl off" does nots exist with Oracle 11G
Anne -
Hi Basis Expert,
We have done a oracle 11g (11.2.0.2) upgrade in our Mock system.
Can anybody tell me how to uninstall oracle 11g software in AIX 5.3.
I tried searching google but couldnt find it.
Please help me.
Regards,
AnilHi,
Uninstalling all products from UNIX is a lot more consistent. If you do need to resort to a manual uninstall you should do something like:
Uninstall all Oracle components using the Oracle Universal Installer (OUI).
Stop any outstanding processes using the appropriate utilities.
oemctl stop oms user/password
agentctl stop
lsnrctl stop
Alternatively you can kill them using the kill -9 pid command as the root user.
Delete the files and directories below the $ORACLE_HOME.
cd $ORACLE_HOME
rm -Rf *
With the exception of the product directory, delete directories below the $ORACLE_BASE.
cd $ORACLE_BASE
rm -Rf admin doc jre o*
Delete the /etc/oratab file. If using 9iAS delete the /etc/emtab file also.
rm /etc/oratab /etc/emtab
http://docs.oracle.com/cd/B28359_01/install.111/b32002/remove_oracle_sw.htm#CEGBAJIA
Br,
Venky -
Cannot complete oracle 11g installation
I tried to reinstall oracle 11g on windows 2008 R2 and couldn't complete the installation as i am unable to start the oracle service. The system gives the following error message
Instance created.
DIM-00019: create service error
O/S-Error: (OS 1053) The service did not respond to the start or control request
in a timely fashion.
I try to manually create the service and it gives me the same error.
I also tried to start the service using the net start as follows
C:\Users\Administrator>net start oracleserviceprod
The service is not responding to the control function.
More help is available by typing NET HELPMSG 2186.
Having looked at the event viewer in windows, I noticed three different error messages as followsr
Application popup: Microsoft Visual C++ Runtime Library : Runtime Error!
Program: c:\app\administrator\product\11.2.0\dbhome_1\bin\ORACLE.EXE
R6034
An application has made an attempt to load the C runtime library incorrectly.
Please contact the application's support team for more information.
and then
A timeout was reached (30000 milliseconds) while waiting for the OracleServiceprod service to connect.
The OracleServiceprod service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.
Any help will be appreciated.
LucasinstallActions2012-08-21_04-20-22PM.log part 8
INFO:
*** Specify Source Location Page***
INFO: Setting the 'SourceLocation ( FROM_LOCATION )' property to 'C:\Oracle_11g_install\database\install\../stage/products.xml'. Received the value from the command line.
INFO: Initializing OUI Shiphome access setup
INFO: User Action File copied to:C:\Users\ADMINI~1\AppData\Local\Temp\2\OraInstall2012-08-21_04-20-22PM/globalvariables/variable.properties
INFO: User Action File copied to:C:\Users\ADMINI~1\AppData\Local\Temp\2\OraInstall2012-08-21_04-20-22PM/globalvariables/globalvar.xml
INFO: Loading products list. Please wait.
INFO: Loading products list. Please wait.
INFO: Loading global variables
INFO: Reading global variables from file C:/Oracle_11g_install/database/install/../stage/globalvariables/globalvar.xml
WARNING: Duplicate definition of global variable ORACLE_HOSTNAME
INFO: Loading of globalvariables complete
INFO: oracle.ctx Product Location: Empty path specified.
INFO: Setting the PROD_HOME variable of 'oracle.dbjava.ic_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/oracle_dbjava_ic'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.dbjava.jdbc_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/oracle_dbjava_jdbc'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.dbjava.ucp_11.2.0.1.0' to ''. Received the value from the variable calculation.
INFO: oracle.dbjava.ucp Product Location: Empty path specified.
INFO: Setting the PROD_HOME variable of 'oracle.dbjava.server_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/oracle_dbjava_server'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.has.common_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/oracle_prod'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.has.common.cvu_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/oracle.has.common.cvu'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.has.db_11.2.0.1.0' to ''. Received the value from the variable calculation.
INFO: oracle.has.db Product Location: Empty path specified.
INFO: Setting the PROD_HOME variable of 'oracle.has.deconfig_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/has_deconfig'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.has.rsf_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/oracle_rsf_has_rsf'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.install.deinstalltool_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/deinstalltool'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.javavm.client_11.2.0.1.0' to ''. Received the value from the variable calculation.
INFO: oracle.javavm.client Product Location: Empty path specified.
INFO: Setting the PROD_HOME variable of 'oracle.javavm.containers_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/oracle_java_j2ee_core'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.javavm.server_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/oracle_javavm_server_cmp'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.ldap.admin_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.ldap.client_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.ldap.security.osdt_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/oracle_ldap_security_osdt'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.ldap.owm_11.2.0.1.0' to ''. Received the value from the variable calculation.
INFO: oracle.ldap.owm Product Location: Empty path specified.
INFO: Setting the PROD_HOME variable of 'oracle.ldap.rsf_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/oracle_ldap_rsf_cmp'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.ldap.rsf.ic_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/oracle.ldap.rsf.ic'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.ldap.ssl_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/oracle.ldap.ssl'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.mgw.common_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1\mgw'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.network_11.2.0.1.0' to ''. Received the value from the variable calculation.
INFO: oracle.network Product Location: Empty path specified.
INFO: Setting the PROD_HOME variable of 'oracle.network.aso_11.2.0.1.0' to ''. Received the value from the variable calculation.
INFO: oracle.network.aso Product Location: Empty path specified.
INFO: Setting the PROD_HOME variable of 'oracle.network.client_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/oracle_network_client'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.network.cman_11.2.0.1.0' to ''. Received the value from the variable calculation.
INFO: oracle.network.cman Product Location: Empty path specified.
INFO: Setting the PROD_HOME variable of 'oracle.network.listener_11.2.0.1.0' to ''. Received the value from the variable calculation.
INFO: oracle.network.listener Product Location: Empty path specified.
INFO: Setting the PROD_HOME variable of 'oracle.network.rsf_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/oracle.network.rsf'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.nlsrtl.rsf_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/oracle_nlsrtl_rsf'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.nlsrtl.rsf.ic_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/oracle_nlsrtl_rsf_ic'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.nlsrtl.rsf.lbuilder_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/oracle_nlsrtl_rsf_lbuilder'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.ntmgmtobjs_11.2.0.1.0' to ''. Received the value from the variable calculation.
INFO: oracle.ntmgmtobjs Product Location: Empty path specified.
INFO: Setting the PROD_HOME variable of 'oracle.ntoledb_11.2.0.1.0' to ''. Received the value from the variable calculation.
INFO: oracle.ntoledb Product Location: Empty path specified.
INFO: Setting the PROD_HOME variable of 'oracle.ntoledb.odp_net_2_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/ODP.NET'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.ntoramts_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/oramts'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.ntrdbms.admin_11.2.0.1.0' to ''. Received the value from the variable calculation.
INFO: oracle.ntrdbms.admin Product Location: Empty path specified.
INFO: Setting the PROD_HOME variable of 'oracle.ntrdbms.oraconfig_11.2.0.1.0' to ''. Received the value from the variable calculation.
INFO: oracle.ntrdbms.oraconfig Product Location: Empty path specified.
INFO: Setting the PROD_HOME variable of 'oracle.ntrdbms.perfmon_11.2.0.1.0' to ''. Received the value from the variable calculation.
INFO: oracle.ntrdbms.perfmon Product Location: Empty path specified.
INFO: Setting the PROD_HOME variable of 'oracle.odbc_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1in'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.odbc.ic_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1in'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.ons_11.2.0.0.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/opmn'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.ons.eons_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.options_11.2.0.1.0' to ''. Received the value from the variable calculation.
INFO: oracle.options Product Location: Empty path specified.
INFO: Setting the PROD_HOME variable of 'oracle.oracore.rsf_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/oracle.oracore.rsf'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.oraolap_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/olap'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.oraolap.api_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/oracle.oraolap.api'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.oraolap.dbscripts_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/oracle_prod'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.ordim.annotator_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/oracle_prod'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.ordim.client_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/oracle.interMedia.imclient'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.ordim.jai_11.2.0.1.0' to ''. Received the value from the variable calculation.
INFO: oracle.ordim.jai Product Location: Empty path specified.
INFO: Setting the PROD_HOME variable of 'oracle.ordim.rdbms_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/oracle_prod'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.ordim.server_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/oracle.options.intermedia.imserver'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.ovm_11.2.0.1.0' to ''. Received the value from the variable calculation.
INFO: oracle.ovm Product Location: Empty path specified.
INFO: Setting the PROD_HOME variable of 'oracle.perlint_5.10.0.0.1' to 'C:\app\Administrator\product\11.2.0\dbhome_1\perl'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.perlint.expat_2.0.1.0.1' to 'C:\app\Administrator\product\11.2.0\dbhome_1'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.perlint.modules_5.10.0.0.1' to 'C:\app\Administrator\product\11.2.0\dbhome_1\perl'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.precomp_11.2.0.1.0' to ''. Received the value from the variable calculation.
INFO: oracle.precomp Product Location: Empty path specified.
INFO: Setting the PROD_HOME variable of 'oracle.precomp.common_11.2.0.1.0' to ''. Received the value from the variable calculation.
INFO: oracle.precomp.common Product Location: Empty path specified.
INFO: Setting the PROD_HOME variable of 'oracle.precomp.lang_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/oracle_prod'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.precomp.rsf_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/oracle_rsf_precomp_rsf'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.rdbms_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/oracle_rdbms'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.rdbms.crs_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/oracle_prod'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.rdbms.dbscripts_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/oracle_rdbms_dbscripts'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.rdbms.deconfig_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1\rdbms\deconfig'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.rdbms.dm_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/oracle_prod'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.rdbms.hsodbc_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/hs'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.rdbms.hs_common_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/oracle_rdbms_hs_common'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.rdbms.install.common_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/oracle.rdbms.install.common'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.rdbms.lbac_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/oracle_prod'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.rdbms.locator_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/oracle_prod'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.rdbms.oci_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/oracle_rdbms_oci'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.rdbms.olap_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/oracle_prod'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.rdbms.partitioning_11.2.0.1.0' to ''. Received the value from the variable calculation.
INFO: oracle.rdbms.partitioning Product Location: Empty path specified.
INFO: Setting the PROD_HOME variable of 'oracle.rdbms.plsql_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/oracle_rdbms_plsql'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.rdbms.rsf_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/oracle.rdbms.rsf'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.rdbms.rsf.ic_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/oracle.rdbms.ic'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.rdbms.rsf.runtime_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/oracle.rdbms.rsf.runtime'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.rdbms.rman_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/oracle.rdbms.rman'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.rdbms.util_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/oracle.rdbms.util'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.rsf_11.2.0.1.0' to ''. Received the value from the variable calculation.
INFO: oracle.rsf Product Location: Empty path specified.
INFO: Setting the PROD_HOME variable of 'oracle.sdo_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/oracle_cartridges_spatial'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.slax.rsf_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/oracle.slax.rsf'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.sqlj.sqljruntime_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/oracle_java_sqlj_sqljruntime'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.sqlplus_11.2.0.1.0' to ''. Received the value from the variable calculation.
INFO: oracle.sqlplus Product Location: Empty path specified.
INFO: Setting the PROD_HOME variable of 'oracle.sqlplus.ic_11.2.0.1.0' to ''. Received the value from the variable calculation.
INFO: oracle.sqlplus.ic Product Location: Empty path specified.
INFO: Setting the PROD_HOME variable of 'oracle.sysman.agent_10.2.0.4.2' to 'C:\app\Administrator\product\11.2.0\dbhome_1'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.sysman.agent.core_10.2.0.4.2' to 'C:\app\Administrator\product\11.2.0\dbhome_1'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.sysman.common_10.2.0.4.2' to 'C:\app\Administrator\product\11.2.0\dbhome_1'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.sysman.common.core_10.2.0.4.2' to 'C:\app\Administrator\product\11.2.0\dbhome_1'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.sysman.console.db_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.sysman.ess_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.sysman.console.emcp_11.2.0.1.0' to ''. Received the value from the variable calculation.
INFO: oracle.sysman.console.emcp Product Location: Empty path specified.
INFO: Setting the PROD_HOME variable of 'oracle.sysman.db.rsf_10.2.0.4.2' to 'C:\app\Administrator\product\11.2.0\dbhome_1/oracle.sysman.db.rsf'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.sysman.oms.core_10.2.0.4.2' to 'C:\app\Administrator\product\11.2.0\dbhome_1'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.sysman.plugin.db.main.agent_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.sysman.plugin.db.main.oms_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.sysman.plugin.db.main.repository_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.sysman.repository.core_10.2.0.4.2' to 'C:\app\Administrator\product\11.2.0\dbhome_1'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.sysman.paf_10.2.0.4.2' to 'C:\app\Administrator\product\11.2.0\dbhome_1/oracle.sysman.paf'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.winprod_11.2.0.1.0' to ''. Received the value from the variable calculation.
INFO: oracle.winprod Product Location: Empty path specified.
INFO: Setting the PROD_HOME variable of 'oracle.wwg.plsql_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/oracle_rdbms'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.xdk_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/oracle_prod'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.xdk.parser.java_11.2.0.1.0' to ''. Received the value from the variable calculation.
INFO: oracle.xdk.parser.java Product Location: Empty path specified.
INFO: Setting the PROD_HOME variable of 'oracle.xdk.rsf_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/oracle_rsf_rdbms_rsf'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.xdk.server_11.2.0.1.0' to ''. Received the value from the variable calculation.
INFO: oracle.xdk.server Product Location: Empty path specified.
INFO: Setting the PROD_HOME variable of 'oracle.xdk.xquery_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/oracle.xdk.xquery'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.sdo.locator_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/oracle_cartridges_locator'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.marvel_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/marvel'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.dbdev_11.2.0.1.0' to ''. Received the value from the variable calculation.
INFO: oracle.dbdev Product Location: Empty path specified.
INFO: Setting the PROD_HOME variable of 'oracle.owb.rsf_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/oracle_owb_shortcut_ids'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.sysman.ccr_10.3.1.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/ccr'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.has.cfs_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/oracle_crs_wincfs'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.rdbms.dv_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/oracle_rdbms_dv'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.rdbms.dv.oc4j_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/oracle_rdbms_dv_oc4j'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.javavm.companion_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/oracle_javavm_companion'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.rdbms.rat_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/oracle_prod'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.wlm.em_11.2.0.1.0' to ''. Received the value from the variable calculation.
INFO: oracle.wlm.em Product Location: Empty path specified.
INFO: Setting the PROD_HOME variable of 'oracle.sysman.ccr.deconfig_10.3.1.0.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/oracle.sysman.ccr.deconfig'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.aspnet_2_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/ASP.NET'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.jdk_1.5.0.17.04' to 'C:\app\Administrator\product\11.2.0\dbhome_1\jdk'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.swd.oui_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1\oui'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.swd.oui.core_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1\oui'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.swd.opatch_11.2.0.0.2' to 'C:\app\Administrator\product\11.2.0\dbhome_1\OPatch'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.swd.jre_1.5.0.11.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1\jre\1.5.0'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.rdbms.install.seeddb_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/oracle.rdbms.install.seeddb'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.rdbms.install.seeddb.sample_schema_11.2.0.1.0' to 'C:\app\Administrator\product\11.2.0\dbhome_1/demo/schema'. Received the value from the variable calculation.
INFO: Performing operation for OUI Oracle Home access setup
INFO: Unable to read C:/app/Administrator/product/11.2.0/dbhome_1/inventory/ContentsXML/comps.xml. Some inventory information may be lost.
INFO: Unable to read C:/Program Files/Oracle/Inventory/ContentsXML/comps.xml. Some inventory information may be lost.
INFO:
Regards.
Lucas -
Error while creating a JDBC connection to Oracle 11g using WLS 6.1
Hi
I am trying to connect to Oracle 11g database on Weblogic 6.1 server.
First of all i would like to know if this is compatible?
The environement that i have is this
1. JDK 1.3
2. Database 11g is on remote system
3. Oracle client on my local system ( Connecting to the 11g DB through the client works fine)
4. Weblogic server 6.1
5. Currently the application is connected to Oracle 10g DB and working fine(We are attempting to move it to 11g)
Below are the steps that i followed to create the connection:
1. Made an entry for the datasource in config.xml under <WLS_DOMAIN>/config folder as below
<JDBCConnectionPool DriverName="oracle.jdbc.driver.OracleDriver"
MaxCapacity="4" Name="CADConnectionPool"
Properties="user=abc_proxy;password=proxy_abc;dll=ocijdbc8;protocol=thin"
RefreshMinutes="5" ShrinkPeriodMinutes="10" Targets="CAsvr"
TestConnectionsOnRelease="true" TestConnectionsOnReserve="true"
TestTableName="dual" URL="jdbc:oracle:thin:@gen11t-ora.db.lab.xyz.com:1530:GEN11T"/>
2. Restarted the server.
3. Ran the application and get the following error on the server console:
<Aug 22, 2011 12:39:42 AM CDT> <Error> <JDBC> <Cannot startup connection pool "C
ADConnectionPool" weblogic.common.ResourceException:
Could not create pool connection. The DBMS driver exception was:
java.lang.ArrayIndexOutOfBoundsException
at oracle.security.o3logon.C0.r(C0)
at oracle.security.o3logon.C0.l(C0)
at oracle.security.o3logon.C1.c(C1)
at oracle.security.o3logon.O3LoginClientHelper.getEPasswd(O3LoginClientH
elper)
at oracle.jdbc.ttc7.O3log.<init>(O3log.java:289)
at oracle.jdbc.ttc7.TTC7Protocol.logon(TTC7Protocol.java:251)
at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:246)
at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.ja
va:365)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:260)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection(Con
nectionEnvFactory.java:193)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(Con
nectionEnvFactory.java:134)
at weblogic.common.internal.ResourceAllocator.makeResources(ResourceAllo
cator.java:705)
at weblogic.common.internal.ResourceAllocator.<init>(ResourceAllocator.j
ava:282)
at weblogic.jdbc.common.internal.ConnectionPool.startup(ConnectionPool.j
ava:650)
at weblogic.jdbc.common.JDBCService.addDeployment(JDBCService.java:107)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(Depl
oymentTarget.java:360)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(Dep
loymentTarget.java:285)
at weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeploy
ments(DeploymentTarget.java:239)
at weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(
DeploymentTarget.java:199)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMB
eanImpl.java:636)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl
.java:621)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(Configurat
ionMBeanImpl.java:360)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
57)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
25)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
at $Proxy31.updateDeployments(Unknown Source)
at weblogic.management.configuration.ServerMBean_CachingStub.updateDeplo
yments(ServerMBean_CachingStub.java:2977)
at weblogic.management.mbeans.custom.ApplicationManager.startConfigManag
er(ApplicationManager.java:372)
at weblogic.management.mbeans.custom.ApplicationManager.start(Applicatio
nManager.java:160)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMB
eanImpl.java:636)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl
.java:621)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(Configurat
ionMBeanImpl.java:360)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
57)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
25)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
at $Proxy42.start(Unknown Source)
at weblogic.management.configuration.ApplicationManagerMBean_CachingStub
.start(ApplicationManagerMBean_CachingStub.java:480)
at weblogic.management.Admin.startApplicationManager(Admin.java:1234)
at weblogic.management.Admin.finish(Admin.java:644)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java:524)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:207)
at weblogic.Server.main(Server.java:35)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection(Con
nectionEnvFactory.java:209)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(Con
nectionEnvFactory.java:134)
at weblogic.common.internal.ResourceAllocator.makeResources(ResourceAllo
cator.java:705)
at weblogic.common.internal.ResourceAllocator.<init>(ResourceAllocator.j
ava:282)
at weblogic.jdbc.common.internal.ConnectionPool.startup(ConnectionPool.j
ava:650)
at weblogic.jdbc.common.JDBCService.addDeployment(JDBCService.java:107)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(Depl
oymentTarget.java:360)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(Dep
loymentTarget.java:285)
at weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeploy
ments(DeploymentTarget.java:239)
at weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(
DeploymentTarget.java:199)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMB
eanImpl.java:636)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl
.java:621)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(Configurat
ionMBeanImpl.java:360)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
57)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
25)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
at $Proxy31.updateDeployments(Unknown Source)
at weblogic.management.configuration.ServerMBean_CachingStub.updateDeplo
yments(ServerMBean_CachingStub.java:2977)
at weblogic.management.mbeans.custom.ApplicationManager.startConfigManag
er(ApplicationManager.java:372)
at weblogic.management.mbeans.custom.ApplicationManager.start(Applicatio
nManager.java:160)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMB
eanImpl.java:636)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl
.java:621)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(Configurat
ionMBeanImpl.java:360)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
57)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
25)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
at $Proxy42.start(Unknown Source)
at weblogic.management.configuration.ApplicationManagerMBean_CachingStub
.start(ApplicationManagerMBean_CachingStub.java:480)
at weblogic.management.Admin.startApplicationManager(Admin.java:1234)
at weblogic.management.Admin.finish(Admin.java:644)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java:524)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:207)
at weblogic.Server.main(Server.java:35)
Can't load scjd12.dll, file not found java.library.path=C:\jdk1.3.1_11\bin;.;C:\WINDOWS\system32;C:\WINDOWS;.\bin;C:\P
rogram Files\Lotus\Notes\Data;C:\Program Files\Lotus\Notes;C:\Program Files\Java
\jre1.5.0_17\bin;C:\Program Files\Java\j2re1.4.2_06\bin;C:\Oracle\bin;C:\Program
Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\WINDOWS\sys
tem32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\WINDOWS\system32\nls;C:\WINDOWS\sys
tem32\nls\ENGLISH;C:\Program Files\QuickTime\QTSystem\;C:\Program Files\Rational
\common;C:\Program Files\Rational\ClearCase\bin;C:\apache-ant-1.6.5\bin;C:\jdk1.
3.1_11\bin;C:\Program Files\Citrix\ICAService\;C:\Program Files\Citrix\System32\
;Z:.
<Aug 22, 2011 12:38:06 AM CDT> <Info> <JDBC> <Sleeping in createResource()>
<Aug 22, 2011 12:38:07 AM CDT> <Error> <JDBC> <Cannot startup connection pool "c
ispool" weblogic.common.ResourceException:
Could not load 'com.neon.jdbc.Driver
If this is a type-4 JDBC driver, it could occur if the JDBC
driver is not in the system CLASSPATH.
If this is a type-2 JDBC driver, it may also indicate that
the Driver native layers(DBMS client lib or driver DLL)
have not been installed properly on your system
or in your PATH environment variable.
This is most likely caused by one of the following:
1. The native layer SO, SL, or DLL could not be found.
2. The file permissions on the native layer SO, SL, or DLL
have not been set properly.
3. The native layer SO, SL, or DLL exists, but is either
invalid or corrupted.
For more information, read the installation documentation
for your JDBC Driver, available from:
http://e-docs.bea.com
at weblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection(Con
nectionEnvFactory.java:212)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(Con
nectionEnvFactory.java:134)
at weblogic.common.internal.ResourceAllocator.makeResources(ResourceAllo
cator.java:705)
at weblogic.common.internal.ResourceAllocator.<init>(ResourceAllocator.j
ava:282)
at weblogic.jdbc.common.internal.ConnectionPool.startup(ConnectionPool.j
ava:650)
at weblogic.jdbc.common.JDBCService.addDeployment(JDBCService.java:107)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(Depl
oymentTarget.java:360)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(Dep
loymentTarget.java:285)
at weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeploy
ments(DeploymentTarget.java:239)
at weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(
DeploymentTarget.java:199)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMB
eanImpl.java:636)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl
.java:621)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(Configurat
ionMBeanImpl.java:360)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
57)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
25)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
at $Proxy31.updateDeployments(Unknown Source)
at weblogic.management.configuration.ServerMBean_CachingStub.updateDeplo
yments(ServerMBean_CachingStub.java:2977)
at weblogic.management.mbeans.custom.ApplicationManager.startConfigManag
er(ApplicationManager.java:372)
at weblogic.management.mbeans.custom.ApplicationManager.start(Applicatio
nManager.java:160)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMB
eanImpl.java:636)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl
.java:621)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(Configurat
ionMBeanImpl.java:360)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
57)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
25)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
at $Proxy42.start(Unknown Source)
at weblogic.management.configuration.ApplicationManagerMBean_CachingStub
.start(ApplicationManagerMBean_CachingStub.java:480)
at weblogic.management.Admin.startApplicationManager(Admin.java:1234)
at weblogic.management.Admin.finish(Admin.java:644)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java:524)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:207)
at weblogic.Server.main(Server.java:35)
Would like some help on this asap as the project is in critical stage.
ThanksThe driver being used by your weblogic is too old and incompatible with the DBMS. Upgrade the driver.
-
Oracle 11g Quartz Scheduler 1.8.5 running under JBOSS 5.1
Basically I'm getting this error when running Quartz configured for the jobStore
org.quartz.jobStore.class = org.quartz.impl.jdbcjobstore.JobStoreCMT
I've got two data sources setup.
One data source is setup to be looked up via JNDI (presumably for the one that may participate in distributed JTA XA transactions) and one that
supposedly is not to participate in JTA transactions in which quartz can call commit/rollback on it's own.
The problem I'm seeing with the interaction of the two is the following exception:
05:21:27,292 ERROR [TxPolicy] javax.ejb.EJBTransactionRolledbackException: SqlMapClient operation; uncategorized SQLException for SQL []; SQL state [9
9999]; error code [29875];
--- The error occurred in XXXXX_COORDINATE_SqlMap.xml.
--- The error occurred while applying a parameter map.
--- Check the XXXX_COORDINATE.insert-InlineParameterMap.
--- Check the statement (update failed).
--- Cause: java.sql.SQLException: ORA-29875: failed in the execution of the ODCIINDEXINSERT routine
ORA-29400: data cartridge error
ORA-14450: attempt to access a transactional temp table already in use
ORA-06512: at "MDSYS.SDO_INDEX_METHOD_10I", line 720
ORA-06512: at "MDSYS.SDO_INDEX_METHOD_10I", line 225
; nested exception is com.XXXXXibatis.common.jdbc.exception.NestedSQLException:
--- The error occurred in XXXXX_COORDINATE_SqlMap.xml.
--- The error occurred while applying a parameter map.
--- Check the XXXXX_COORDINATE.insert-InlineParameterMap.
--- Check the statement (update failed).
--- Cause: java.sql.SQLException: ORA-29875: failed in the execution of the ODCIINDEXINSERT routine
ORA-29400: data cartridge error
ORA-14450: attempt to access a transactional temp table already in use
ORA-06512: at "MDSYS.SDO_INDEX_METHOD_10I", line 720
ORA-06512: at "MDSYS.SDO_INDEX_METHOD_10I", line 225
Has anyone seen this error before with the following configuration of Quartz 1.8.5, Oracle 11g, Oracle Spatial?
I've googled and seen reference to Oracle spatial using temp tables and not compatible with transactions... but not sure
exactly how to solve this problem.
Thanks in advacce.Hi;
Can any one advise me where and how can I download proper RPM packages and how do I resolve swap space requirement failure as mentioned above. Please let me know if further information required.You can find all related rpm from your DVD. For rpm please see below thread:
RPM confirmation
Re: Package install for oracle11gr2
For swap:
swap size increase-linux
How to increase swap size?
Regard
Helios -
Oracle 11g Installation problems
Hi there, Im a new Oracle's user, and I am trying to install Oracle 11g in my computer I have Windows Vista SP2 32bits, but I have a lot of problems.
The program send me various messages of Warnings and Errors so I couldnt finished the complete instalation and configuration.
Somebody can help me with some of this errors.
This are the errors: (In Spanish)
ORA-31011: Fallo en el analisis de XML
ORA-19202: Se ha producido un error en el procesamiento
ORA-06512: en "SYS.XMLTYPE", linea 272
ORA-06512: en "XDB.XDB_CONFIGURATION", linea 69
ORA-06512: en "XDB.DBMX_XDB", linea 209
ORA-06512: en "XDB.XDB_CONFIGURATION", linea 92
La configuración de Enterprise Manager ha fallado debido al
siguiente error:
Error al iniciar Database Control
Consulte el archivo log en C:\oraclecfgtoollogsdbca\orc\emConfig.log para obtener mas información
Posteriormente, puede reintentar la configuración de esta base de datos con
Enterprise Manager ejecutando manualmente el archivo de comandos C:\oracle\product\11.1.0\db_1\bin\emca
nstaller ha instalado productos en el grupo de componentes "Oracle Windows Interfaces".
Para soportar un desarrollo perfecto en Microsoft Visual Studio con la base de datos Oracle,
Oracle recomienda descargar e instalar la última versión de
"Oracle Developer Tools for Visual Studio .NET" de Oracle Technology Network.
I will aprecciatte your help.
Thank you!user12191943 wrote:
I have Windows Vista SP2 32bitsPlease specifiy WHICH edition of Vista. Oracle does have many problems with Vista Home. -
Oracle 11g install problem on rhel 4.4
i was trying to install oracle 11g to rhel 4.4
during the install process , there are two warning when runing environment check
one is kernal parameter
i set four kernal parameter like this:
net.core.rmem_default = 262144
net.core.rmem_max = 262144
net.core.wmem_default = 262144
net.core.wmem_max = 262144
but oracle warning me they should be set as 419430
the other is swap space :
i set 2G,but oracle needs 4G.
i neglect them and continue
but when the install proceed 11percent , it stoped there and the i pose the install log is :
INFO: Method 'dispose()' Not implemented in class 'CustomConfigurationOptions'
INFO: config-context initialized
INFO: *** Install Page***
INFO: FastCopy : File Version is Compatible
INFO: Install mode is fastcopy mode for component 'oracle.server' with Install type 'Custom'.
INFO: Link phase has been specified as needed
INFO: Setup phase has been specified as needed
INFO: HomeSetup JRE files in Scratch :0
INFO: Setting variable 'ROOTSH_LOCATION' to '/home/oracle/ora11/DB10g/root.sh'. Received the value from a code block.
INFO: Setting variable 'ROOTSH_LOCATION' to '/home/oracle/ora11/DB10g/root.sh'. Received the value from a code block.
INFO: Performing fastcopy operations based on the information in the file 'racfiles.jar'.
INFO: Performing fastcopy operations based on the information in the file 'oracle.server_Custom_exp_1.xml'.
INFO: Performing fastcopy operations based on the information in the file 'oracle.server_Custom_dirs.lst'.
INFO: Performing fastcopy operations based on the information in the file 'oracle.server_Custom_filemap.jar'.
INFO: Performing fastcopy operations based on the information in the file 'oracle.server_Custom_1.xml'.
INFO: Performing fastcopy operations based on the information in the file 'setperms1.sh'.
INFO: Number of threads for fast copy :1
INFO: FastCopy : The component info is ignored :oracle.network.cman:11.1.0.6.0
INFO: FastCopy : The component info is ignored :oracle.precomp.lang:11.1.0.6.0
INFO: FastCopy : The component info is ignored :oracle.odbc:11.1.0.6.0
INFO: FastCopy : The component info is ignored :oracle.rdbms.dv:11.1.0.6.0
INFO: FastCopy : The component info is ignored :oracle.rdbms.lbac:11.1.0.6.0
INFO: FastCopy : The component info is ignored :oracle.rdbms.dv.oc4j:11.1.0.6.0
INFO: FastCopy : The component info is ignored :oracle.odbc.ic:11.1.0.6.0
INFO: FastCopy : The component info is ignored :oracle.sysman.ccr:10.2.6.0.0
i do not know how to make it work ,please help me
thank you!This is the output from my current 11g installation on an OEL4:
Checking operating system package requirements ...
Checking for make-3.80; found make-1:3.80-6.EL4-i386. Passed
Checking for binutils-2.15.92.0.2; found binutils-2.15.92.0.2-21-i386. Passed
Checking for gcc-3.4.5; found gcc-3.4.6-3.1-i386. Passed
Checking for libaio-0.3.105; found libaio-0.3.105-2-i386. Passed
Checking for libaio-devel-0.3.105; found libaio-devel-0.3.105-2-i386. Passed
Checking for libstdc++-3.4.5; found libstdc++-3.4.6-3.1-i386. Passed
Checking for elfutils-libelf-devel-0.97; found elfutils-libelf-devel-0.97.1-3-i386. Passed
Checking for sysstat-5.0.5; found sysstat-5.0.5-11.rhel4-i386. Passed
Checking for libgcc-3.4.5; found libgcc-3.4.6-3.1-i386. Passed
Checking for libstdc++-devel-3.4.5; found libstdc++-devel-3.4.6-3.1-i386. Passed
Checking for unixODBC-2.2.11; found unixODBC-2.2.11-1.RHEL4.1-i386. Passed
Checking for unixODBC-devel-2.2.11; found unixODBC-devel-2.2.11-1.RHEL4.1-i386.
~ Madrid -
Oracle 11g ASM installation on HP UX 11.31 Risc
Hi All,
I am planning to install Oracle 11g ASM on HP UX 11.31 Risc machine. Is it possible to configure ASM without using RAW devices. If yes what is the procedure.
Thanks,I am planning to install Oracle 11g ASM on HP UX 11.31 Risc machine. Is it possible to configure ASM without using RAW devices. If yes what is the procedure.AFAIK, it is not possible.
-
Installing Oracle 11g on Ubuntu 8.04
Hello,
I am having a sleepless night trying to install Oracle 11g express on Ubuntu 8.04.
There is no server. I am actually trying to install on the exact box i am using.
I got this error again and again. Any pro and experts please help:
Can't connect to X11 window server using '127.0.0.1:0.0' as the value of the DISPLAY variable.
127.0.0.1:0.0
127.0.0.1:0.0
=======================
oracle@sithkong-desktop:~/database$ DISPLAY=127.0.0.1:0.0
oracle@sithkong-desktop:~/database$ export DISPLAY
oracle@sithkong-desktop:~/database$ xclock
No protocol specified
Error: Can't open display: 127.0.0.1:0.0
oracle@sithkong-desktop:~/database$ ./runInstaller -ignoreSysPrereqs
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 80 MB. Actual 10751 MB Passed
Checking swap space: must be greater than 150 MB. Actual 1915 MB Passed
Checking monitor: must be configured to display at least 256 colors
>>> Could not execute auto check for display colors using command /usr/X11R6/bin/xdpyinfo. Check if the DISPLAY variable is set. Failed <<<<
Ignoring required pre-requisite failures. Continuing...Preparing to launch Oracle Universal Installer from /tmp/OraInstall2009-08-29_10-22-59PM. Please wait ...oracle@sithkong-desktop:~/database$ Oracle Universal Installer, Version 11.1.0.6.0 Production
Copyright (C) 1999, 2007, Oracle. All rights reserved.
No protocol specified
Can't connect to X11 window server using '127.0.0.1:0.0' as the value of the DISPLAY variable.
127.0.0.1:0.0
127.0.0.1:0.0
OUI-10025:Unable to start an interactive install session because of the following error:Can't connect to X11 window server using '127.0.0.1:0.0' as the value of the DISPLAY variable. The DISPLAY environment variable should be set to <hostname or IP address>:<screen>, where the <screen> is usually '0.0'.
OUI-10026:Depending on the Unix Shell, you can use one of the following commands as examples to set the DISPLAY environment variable:
- For csh: % setenv DISPLAY 192.168.1.128:0.0
- For sh, ksh and bash: $ DISPLAY=192.168.1.128:0.0; export DISPLAY
Use the following command to see what shell is being used:
echo $SHELL
Use the following command to view the current DISPLAY environment variable setting:
echo $DISPLAY
- Make sure that client users are authorized to connect to the X Server.
OUI-10027:To enable client users to access the X Server, open an xterm, dtterm or xconsole as the user that started the session and type the following command:
% xhost +
To test that the DISPLAY environment variable is set correctly, run a X11 based program that comes with the native operating system such as 'xclock':
% <full path to xclock... see below>
If you are not able to run xclock successfully, please refer to your PC-X Server or OS vendor for further assistance.
Typical path for 'xclock': '/usr/X11R6/bin/xclock'http://www.pythian.com/news/968/installing-oracle-11g-on-ubuntu-804-lts-hardy-heron
HTH... -
Installer problem - Oracle 11g on Redhat ES 5.1 (x86)
Hi,
I'm trying to run the "runInstaller" script to install Oracle 11g onto my Redhat ES 5.1 (x86) machine and the following error is being reported:
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 80 MB. Actual 1409 MB Passed
Checking swap space: must be greater than 150 MB. Actual 1407 MB Passed
Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2008-01-10_04-46-50AM. Please wait ...Exception in thread "main" java.lang.NoClassDefFoundError: oracle/ewt/lwAWT/BufferedFrame
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
at java.net.URLClassLoader.access$100(URLClassLoader.java:56)
at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:268)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
I copied all the installation tree to /tmp/oracle and ran chmod -R 777 * to make sure I could see all the files.
I've been logging onto the server as the oracle user.
I've also got Java v1.5.0.6 installed
I've run out of ideas - anyone able to assist ?I've sorted it. Was originally copy unzipped install files from DVD into /tmp but think there must have been some corruption. I now copied and unzipped the install file onto the RH machine and it's now working.
-
Installing Oracle 11g R2 on RHEL 5.9 server
Hi,
I've been trying to install Oracle 11g R2 on a Red Hat Enterprise Linux 5.9 server but have not succeeded thus far. The server meets all the software and hardware requirements for Oracle 11g Release 2 and when it also has all the prerequisite packages/ RPM's on it, when checked manually. I have set up the various kernel, semaphore and local port range parameters in accordance with the Oracle guides for installing Oracle on RHEL 5. I also followed the online guides to create the "oracle" user and set up the groups (oinstall, dba, oper and asm).
However, when I run the installer, it shows "Failed" for all the prerequisite checks. I tried to ignore this and install Oracle but it failed at 37% and gave multiple errors, related to invoking target 'XYZ' of different files including makefile and gcc.
I suspect that either the installer is unable to detect these packages as they already exist on our server or it is something to do around permissions to the groups. I read on these forums that it might be because of a "cvu" folder created inside /tmp that requires '777' permission but am not sure if that's what's causing our installation to fail.
Please let me know how to proceed with the installation and guide me through this.
Thanks.Hi, its Oracle 11g R2 - 2.0.3.6 .
The O.S is Linux x86_64
server: RHEL 5.9 (Takinga) with kernel: 2.6.18
I've been working on this all day today and have managed to overcome the errors regarding the missing/ failed packages. I've also verified that my kernel parameters are correct; I had missed the kernel shmmni parameter yesterday.
The installer now detects all the packages & runs till 86% when it gives the error: "error invoking target client_sharedlib of makefile".
Kindly let me know how to proceed. Thanks in advance ! -
Problem when installing Oracle 11g R2 x64 on rhel 5.8 x86_64
Hi All,
I’m trying to install oracle 11g software only to upgrade my database from 10g to 11g and i install all required packages listed in installation prerequisites but the below error appeared
error in invoking target 'mkldflags ntcontab.o nnfgt.o' of makefile
$tail -15 $ORACLE_HOME/install/make.log
/oradata/db/tech_st/11.2.0/sysman/lib/ins_emagent.mk:52: warning: ignoring old commands for target `nmosudo' make -f /oradata/db/tech_st/11.2.0/sysman/lib/ins_emagent.mk relink_exe EXENAME=nmo make[1]: Entering directory `/oradata/db/tech_st/11.2.0/sysman/lib' /oradata/db/tech_st/11.2.0/sysman/lib/ins_emagent.mk:113: warning: overriding commands for target `nmosudo' /oradata/db/tech_st/11.2.0/sysman/lib/ins_emagent.mk:52: warning: ignoring old commands for target `nmosudo' gcc -o /oradata/db/tech_st/11.2.0/sysman/lib/nmo -L/oradata/db/tech_st/11.2.0/lib/ -L/oradata/db/tech_st/11.2.0/sysman/lib/ `cat /oradata/db/tech_st/11.2.0/lib/sysliblist` -lm `cat /oradata/db/tech_st/11.2.0/lib/sysliblist` -ldl -lm -L/oradata/db/tech_st/11.2.0/lib /oradata/db/tech_st/11.2.0/sysman/lib/s0nmo.o /oradata/db/tech_st/11.2.0/sysman/lib/libnmo.a -lcrypt -ldl `cat /oradata/db/tech_st/11.2.0/lib/sysliblist` -ldl -lm /bin/sh: cat: command not found /bin/sh: cat: command not found /bin/sh: cat: command not found /oradata/db/tech_st/11.2.0/sysman/lib/s0nmo.o: In function `main': s0nmo.c:(.text+0x1b): undefined reference to `__intel_new_proc_init' make[1]: Leaving directory `/oradata/db/tech_st/11.2.0/sysman/lib' collect2: ld returned 1 exit status make[1]: *** [/oradata/db/tech_st/11.2.0/sysman/lib/nmo] Error 1 make: *** [nmo] Error 2 EBS :12.0.4
Please help me in this issue. Thanks in advanceSeems you are trying to Install 32-bit 11g R2 on Linux RHEL 5 (64-bit) server fails with relinking errors - 'Mkldflags ntcontab.o nnfgt.o'
Please check following MOS Notes.
Install/Clone 32-bit 11GR2 Client On Linux x86_64 Fails With Error In Invoking Target 'Mkldflags ntcontab.o nnfgt.o' Of Makefile ins_net_client.mk (Doc ID 1473421.1) -
Installation of Oracle 11g on RHEL 5 (Listener cannot start )
Hello,
I have install Oracle 11g on my linux RHEL5. The installation was succesfull but cannot start the listener. The configuration of even the EM at the end of the installation for the same reason , Listener not started.
Trying to connect to my Listener i got the following error
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=karen)(PORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Linux Error: 111: Connection refused
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCPS)(HOST=karen)(PORT=2484)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Linux Error: 111: Connection refused
LSNRCTL> start
Starting /u01/app/oracle/product/11.1.0/db_1/bin/tnslsnr: please wait...
TNS-12537: TNS:connection closed
TNS-12560: TNS:protocol adapter error
TNS-00507: Connection closed
Linux Error: 29: Illegal seek
Can Some help troubleshoot this problem.
ThanksDear bezgodo!
Please execute the following commands and compare the results.
1.
hostname --fqdn2.
nslookup <your_ip_address>In both cases you should see the fully qualified hostname of your server.
Yours sincerely
Florian W.
Maybe you are looking for
-
My children have accidetly locked me out of my iPhone 4s, I was showing my youngest how to put a pass word on her ipod, by using my phone as a demo and when it came time to put the pass code in my baby touched the screen and ...well...uh oh. Now the
-
Understanding Weblogic Integration 9.2
Hi All, I am very new to Weblogic Integration and we were asked to make our application use WLI. Our application has many source feeds and we also interface with SAP with Web Services calls. I am totally new to Weblogic Integration and I would apprec
-
Hi, We need to generate a report listing out the purchases per vendor and giving the details of articles purchased, quantaties, and values. Could you please advise as to how can this be generated ? We tried to ran the report ME80FN, and after checkin
-
Hi, Could you please help me on how to pull the PO from a workflow ? I could access we20 to find the agent #.How do I see if the PO as item under that again and find what is the issue with that PO. Appreciate you help on transactions,process. Regards
-
Advanced Button with Movie Clip and Fading
Problem: I'm trying to create a bottun that when you roll over it it plays a movie clip and also fades in and out on roll out. It is similiar to the three main navigating buttons on the following site. http://www.fjcruiser.ca/ the buttons with the co