OMS on Unix

Hello!
I have EOM in Windows XP. I want to set up an Oracle Management Server on a HP-UX box.
What commands do I have to run at the unix prompt to create and start up the OMS?
I run oemctl start oms but it doesn't work.
Thanks in advance.

Hello
What error messages got?
please check oms.log for details!
lajos

Similar Messages

  • How to setup a print spool  in UNIX

    Hi support, i am new to basis and to sdn..
      could you please help me with how to setup a print spool  in UNIX.
    Thank you
    Martin

    Message 1 :
    On UNIX:
    1.     Login as sidadm
    2.     Su - root
    3.     Execute "jetadmin" (or use u201Csamu201D if you are familiar with it).
    4.     Select option 1
    5.     Select option 3
    6.     Enter the IP address of the printer
    7.     Select option 1 again and assign an appropriate queue name
    8.     Follow the instructions to complete
    9.     "lpstat -t"  to confirm the printer is enabled
    10.     Setup on R3
    Message 2:
    On SAP
    1.     Transaction u201CSPADu201D
    2.     Switch to change mode
    3.     Chose Output Device
    4.     Select Printer you want to create/copy/change
    5.     To use or by pass DAZEL:
    1.     use Dazel:
    a.     Host Spool Access Method: E
    b.     Host Printer: 1_usbprint03_xxxxxx
    c.     Logical OMS: R3 SID Dazel LOMS
    2.     by pass Dazel:
    a.     Host Spool Access Method: L
    b.     Host Printer: (queue name on UNIX Spool)
    To test printing, try to print something (i.e. spool server list) and go to  Transaction u201CSP01u201D to change the result.

  • Patching Grid Control OMS and Agent to 10.2.0.5 issue

    Oracle 11gR1 RHEL5 - Grid Control 10.2.0.5
    Hi All,
    I have been stuck on this issue for over a month (was relying on Oracle supports help and they just would not reply) and I can't figure it out. Basically, what happened is that my 10.2.0.5 patch set failed partiallty when I was applying it to the OMS. Here is what is going on right now:
    Database Repository (EMREP) - 11gR1 (11.1.0.6) - /opt/app/oracle/product/11.1.0/db_1
    OMS - 10.2.0.5 - /opt/app/oracle/product/10.2.0/grid_1/oms10g
    Agent - 10.2.0.5 - /opt/app/oracle/product/10.2.0/grid_1/agent10g
    When I was almost done with the 10.2.0.5 patch on the OMS, OUI gave me the following error:
    SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration
    assistants at this time. Not successfully running any "Recommended" assistants
    means your system will not be correctly configured.
    *1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the*
    failures.
    *2. Fix the errors causing these failures.*
    *3. Select the failed assistants and click the 'Retry' button to retry them*
    When I checked the logs I found the following messages (Here is a part of it...I think before it started to fail):
    Finished deleting the above files...
    INFO: Configuration assistant "OMS Oneoff Patch Application" succeeded
    INFO: Command = oracle.sysman.emcp.oms.RepositoryPatchUpgrade -verbose
    Repository Upgrade is failed with errors. Restore the database, rectify the errors and retry the install.
    For more details :
    -For configuration issues, look at the log files present in following location:
    /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/cfgfw
    -For repository failures, look at the log files
    /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emrepmgr.log.10.
    2.0.5.0
    /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emrepmgr.log.10.2.0.5.0.errors
    -If not able to identify the repository issues, contact ORACLE Support.
    -After the Repository issues are rectified and upgraded successfully, execute the below runConfig command to run remaining config tools.
    Goto /opt/app/oracle/product/10.2.0/grid_1/oms10g/oui/bin directory and run below command.
    For UNIX :
    ./runConfig.sh ORACLE_HOME=/opt/app/oracle/product/10.2.0/grid_1/oms10g ACTION=patchsetConfigure MODE=perform COMPONENT_XML=oracle.sysman.top.oms.10_2_0_5_0.xml
    For Windows :
    runConfig.bat ORACLE_HOME=/opt/app/oracle/product/10.2.0/grid_1/oms10g ACTION=patchsetConfigure MODE=perform COMPONENT_XML=oracle.sysman.top.oms.10_2_0_5_0.xml
    Command = oracle.sysman.emcp.oms.RepositoryPatchUpgrade has failed
    Exception : java.lang.Exception: Command: /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/admin/emdrep/bin/RepManager -connect (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=rhel-grid)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=emrep))) -action upgrade -no_transx -no_verify -verbose -repos_user sysman -output_file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emrepmgr.log.10.2.0.5.0 failed. Exit code: expected [0 ], but got 45
    INFO: Configuration assistant "Repository Upgrade" failed
    *** Starting OUICA ***
    Oracle Home set to /opt/app/oracle/product/10.2.0/grid_1/oms10g
    Configuration directory is set to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs. All xml files under the directory will be processed
    Parsing configuration file config.xml ....
    Ended Parsing configuration file config.xml
    Start Processing configuration tool Oracle Internet Directory Patch Configuration Assistant....
    Preparing for copying /opt/app/oracle/product/10.2.0/grid_1/oms10g/ldap/log/patchca.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs
    Buffer size for copying file is set to 2048
    Expanding source path /opt/app/oracle/product/10.2.0/grid_1/oms10g/ldap/log/patchca.log
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/ldap/log/patchca.log from the file path expanding...
    WARN: Source file /opt/app/oracle/product/10.2.0/grid_1/oms10g/ldap/log/patchca.log could not be found. Nothing will be copied for this file
    Number of file(s) copied is 0
    Number of directories copied is 0
    End Processing configuration tool Oracle Internet Directory Patch Configuration Assistant
    Start Processing configuration tool Directory Integration Platform Configuration Assistant....
    Preparing for copying /opt/app/oracle/product/10.2.0/grid_1/oms10g/ldap/log/oidca.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs
    Expanding source path /opt/app/oracle/product/10.2.0/grid_1/oms10g/ldap/log/oidca.log
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/ldap/log/oidca.log from the file path expanding...
    WARN: Source file /opt/app/oracle/product/10.2.0/grid_1/oms10g/ldap/log/oidca.log could not be found. Nothing will be copied for this file
    Number of file(s) copied is 0
    Number of directories copied is 0
    End Processing configuration tool Directory Integration Platform Configuration Assistant
    Start Processing configuration tool OC4J Instance Configuration Assistant....
    Preparing for copying /opt/app/oracle/product/10.2.0/grid_1/oms10g/j2ee/home/log/* to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs
    Expanding source path /opt/app/oracle/product/10.2.0/grid_1/oms10g/j2ee/home/log/*
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/j2ee/home/log/home_default_island_1 from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/j2ee/home/log/operations from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/j2ee/home/log/log.xml from the file path expanding...
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/j2ee/home/log/log.xml to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/log.xml
    Number of file(s) copied is 1
    Number of directories copied is 0
    End Processing configuration tool OC4J Instance Configuration Assistant
    Start Processing configuration tool OPMN Configuration Assistant - start HTTP server....
    Preparing for copying /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/* to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs
    Expanding source path /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/*
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/WebCache~WebCacheAdmin~1 from the file path expanding...
    Number of directories copied is 0
    End Processing configuration tool OPMN Configuration Assistant - start OCA Instance
    Start Processing configuration tool Wireless Configuration Assistant....
    Preparing for copying /opt/app/oracle/product/10.2.0/grid_1/oms10g/wireless/logs/upgrade_CA.out to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs
    Expanding source path /opt/app/oracle/product/10.2.0/grid_1/oms10g/wireless/logs/upgrade_CA.out
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/wireless/logs/upgrade_CA.out from the file path expanding...
    WARN: Source file /opt/app/oracle/product/10.2.0/grid_1/oms10g/wireless/logs/upgrade_CA.out could not be found. Nothing will be copied for this file
    Number of file(s) copied is 0
    Number of directories copied is 0
    End Processing configuration tool Wireless Configuration Assistant
    Start Processing configuration tool Wireless Metadata Repository Update....
    Preparing for copying /opt/app/oracle/product/10.2.0/grid_1/oms10g/wireless/logs/upgrade_CA.out to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs
    Expanding source path /opt/app/oracle/product/10.2.0/grid_1/oms10g/wireless/logs/upgrade_CA.out
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/wireless/logs/upgrade_CA.out from the file path expanding...
    WARN: Source file /opt/app/oracle/product/10.2.0/grid_1/oms10g/wireless/logs/upgrade_CA.out could not be found. Nothing will be copied for this file
    Number of file(s) copied is 0
    Number of directories copied is 0
    End Processing configuration tool Wireless Metadata Repository Update
    Start Processing configuration tool Portal Metadata Repository Update....
    Preparing for copying /opt/app/oracle/product/10.2.0/grid_1/oms10g/portal/upg/plsql/upgrade.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs
    Expanding source path /opt/app/oracle/product/10.2.0/grid_1/oms10g/portal/upg/plsql/upgrade.log
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/portal/upg/plsql/upgrade.log from the file path expanding...
    WARN: Source file /opt/app/oracle/product/10.2.0/grid_1/oms10g/portal/upg/plsql/upgrade.log could not be found. Nothing will be copied for this file
    Number of file(s) copied is 0
    Number of directories copied is 0
    End Processing configuration tool Portal Metadata Repository Update
    Start Processing configuration tool OPMN Configuration Assistant....
    Preparing for copying /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/* to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs
    Expanding source path /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/*
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/WebCache~WebCacheAdmin~1 from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/OC4J~OC4J_EM~default_island~1 from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/dcm-daemon~dcm-daemon~dcm~1 from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/ons.log from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/WebCache~WebCache~1 from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/OC4J~OC4J_EMPROV~default_island~1 from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/states from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/OC4J~home~default_island~1 from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/opmn.log from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/HTTP_Server~1 from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/ipm.log from the file path expanding...
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/WebCache~WebCacheAdmin~1 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/WebCache~WebCacheAdmin~1
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/OC4J~OC4J_EM~default_island~1 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/OC4J~OC4J_EM~default_island~1
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/dcm-daemon~dcm-daemon~dcm~1 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/dcm-daemon~dcm-daemon~dcm~1
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/ons.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/ons.log
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/WebCache~WebCache~1 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/WebCache~WebCache~1
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/OC4J~OC4J_EMPROV~default_island~1 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/OC4J~OC4J_EMPROV~default_island~1
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/OC4J~home~default_island~1 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/OC4J~home~default_island~1
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/opmn.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/opmn.log
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/HTTP_Server~1 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/HTTP_Server~1
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/ipm.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/ipm.log
    Number of file(s) copied is 10
    Number of directories copied is 0
    End Processing configuration tool OPMN Configuration Assistant
    Start Processing configuration tool Application Server Control Configuration Assistant....
    Preparing for copying /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/* to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs
    Expanding source path /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/*
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.10 from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emdctl.log from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emrepmgr.log.10.2.0.4.0 from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emagentfetchlet.trc from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.1 from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.4 from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.7 from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.log from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/nfsPatchPlug.log from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/em-application.log from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.9 from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.8 from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emrepmgr.log.10.2.0.5.0 from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emdctl.trc from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emctl.log from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/server.log from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/secure.log from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.6 from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/em.nohup from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emrepmgr.log.10.2.0.5.0.errors from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/em-web-access.log from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/pafLogs from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emias.log from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.5 from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emrepmgr.log.10.2.0.4.0.errors from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.3 from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emagent.trc from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/rmi.log from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emagent.log from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.2 from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emca_repos_out_of_box12_56_33.log from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emagentfetchlet.log from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.log.1 from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emrepmgr.log.10.2.0.5.0.transx from the file path expanding...
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emoms.trc
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.10 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emoms.trc.10
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emdctl.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emdctl.log
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emrepmgr.log.10.2.0.4.0 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emrepmgr.log.10.2.0.4.0
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emagentfetchlet.trc to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emagentfetchlet.trc
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.1 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emoms.trc.1
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.4 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emoms.trc.4
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.7 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emoms.trc.7
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emoms.log
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/nfsPatchPlug.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/nfsPatchPlug.log
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/em-application.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/em-application.log
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.9 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emoms.trc.9
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.8 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emoms.trc.8
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emrepmgr.log.10.2.0.5.0 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emrepmgr.log.10.2.0.5.0
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emdctl.trc to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emdctl.trc
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emctl.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emctl.log
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/server.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/server.log
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/secure.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/secure.log
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.6 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emoms.trc.6
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/em.nohup to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/em.nohup
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emrepmgr.log.10.2.0.5.0.errors to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emrepmgr.log.10.2.0.5.0.errors
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/em-web-access.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/em-web-access.log
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emias.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emias.log
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.5 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emoms.trc.5
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emrepmgr.log.10.2.0.4.0.errors to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emrepmgr.log.10.2.0.4.0.errors
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.3 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emoms.trc.3
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emagent.trc to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emagent.trc
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/rmi.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/rmi.log
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emagent.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emagent.log
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.2 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emoms.trc.2
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emca_repos_out_of_box12_56_33.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emca_repos_out_of_box12_56_33.log
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emagentfetchlet.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emagentfetchlet.log
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.log.1 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emoms.log.1
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emrepmgr.log.10.2.0.5.0.transx to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emrepmgr.log.10.2.0.5.0.transx
    Number of file(s) copied is 34
    Number of directories copied is 0
    End Processing configuration tool Application Server Control Configuration Assistant
    Start Processing configuration tool DCM Repository Update Assistant ....
    Preparing for copying /opt/app/oracle/product/10.2.0/grid_1/oms10g/dcm/logs/* to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs
    Expanding source path /opt/app/oracle/product/10.2.0/grid_1/oms10g/dcm/logs/*
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/dcm/logs/dcmctl_logs from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/dcm/logs/emd_logs from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/dcm/logs/daemon_logs from the file path expanding...
    Number of file(s) copied is 0
    Number of directories copied is 0
    End Processing configuration tool DCM Repository Update Assistant
    INFO: The "/opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
    INFO: Since the option is to overwrite the existing /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/configToolFailedCommands file, backing it up
    INFO: The backed up file name is /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/configToolFailedCommands.bak.1
    SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
    1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
    2. Fix the errors causing these failures.
    3. Select the failed assistants and click the 'Retry' button to retry them.
    INFO: User Selected: Yes/OK
    INFO: Starting to execute configuration assistants
    INFO: Command = oracle.sysman.emcp.oms.RepositoryPatchUpgrade -verbose
    Repository Upgrade is failed with errors. Restore the database, rectify the errors and retry the install.
    For more details :
    -For configuration issues, look at the log files present in following location:
    /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/cfgfw
    -For repository failures, look at the log files
    /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emrepmgr.log.10.2.0.5.0
    /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emrepmgr.log.10.2.0.5.0.errors
    -If not able to identify the repository issues, contact ORACLE Support.
    -After the Repository issues are rectified and upgraded successfully, execute the below runConfig command to run remaining config tools.
    Goto /opt/app/oracle/product/10.2.0/grid_1/oms10g/oui/bin directory and run below command.
    For UNIX :
    ./runConfig.sh ORACLE_HOME=/opt/app/oracle/product/10.2.0/grid_1/oms10g ACTION=patchsetConfigure MODE=perform COMPONENT_XML=oracle.sysman.top.oms.10_2_0_5_0.xml
    For Windows :
    runConfig.bat ORACLE_HOME=/opt/app/oracle/product/10.2.0/grid_1/oms10g ACTION=patchsetConfigure MODE=perform COMPONENT_XML=oracle.sysman.top.oms.10_2_0_5_0.xml
    Command = oracle.sysman.emcp.oms.RepositoryPatchUpgrade has failed
    Exception : java.lang.Exception:
    REPOSITORY UPGRADE STATUS : 3
    INFO: Configuration assistant "Repository Upgrade" failed
    I would appreciate any help on this as I have been stuck on it since April :( Not too happy with Oracle Support.
    Thanks much to all!
    JrOraDBA

    Here is the output for when I applied the patch:
    opatch apply
    Invoking OPatch 10.2.0.3.0
    Oracle interim Patch Installer version 10.2.0.3.0
    Copyright (c) 2005, Oracle Corporation.  All rights reserved..
    Oracle Home       : /opt/app/oracle/product/10.2.0/grid_1/db10g
    Central Inventory : /opt/app/oracle/oraInventory
    from           : /etc/oraInst.loc
    OPatch version    : 10.2.0.3.0
    OUI version       : 10.2.0.3.0
    OUI location      : /opt/app/oracle/product/10.2.0/grid_1/db10g/oui
    Log file location : /opt/app/oracle/product/10.2.0/grid_1/db10g/cfgtoollogs/opatch/opatch2009-04-22_12-07-14PM.log
    ApplySession applying interim patch '4329444' to OH '/opt/app/oracle/product/10.2.0/grid_1/db10g'
    Invoking fuser to check for active processes.
    Invoking fuser on "/opt/app/oracle/product/10.2.0/grid_1/db10g/bin/oracle"
    OPatch detected non-cluster Oracle Home from the inventory and will patch the local system only.
    Please shutdown Oracle instances running out of this ORACLE_HOME on the local system.
    *(Oracle Home = '/opt/app/oracle/product/10.2.0/grid_1/db10g')*
    Is the local system ready for patching?
    *Do you want to proceed? y*
    y
    User Responded with: Y
    Backing up files and inventory (not for auto-rollback) for the Oracle Home
    Backing up files affected by the patch '4329444' for restore. This might take a while...
    Backing up files affected by the patch '4329444' for rollback. This might take a while...
    Patching component oracle.rdbms, 10.1.0.4.0...
    Updating archive file "/opt/app/oracle/product/10.2.0/grid_1/db10g/lib/libserver10.a"  with "lib/libserver10.a/qerix.o"
    ApplySession adding interim patch '4329444' to inventory
    Verifying the update...
    Inventory check OK: Patch ID 4329444 is registered in Oracle Home inventory with proper meta-data.
    Files check OK: Files from Patch ID 4329444 are present in Oracle Home.
    Running make for target ioracle
    The local system has been patched and can be restarted.
    OPatch succeeded.
    However, the weird thing is that I don't see it in the lsinventory:
    */opt/app/oracle/product/10.2.0/grid_1/db10g/OPatch/opatch lsinventory*
    Invoking OPatch 10.2.0.3.0
    Oracle interim Patch Installer version 10.2.0.3.0
    Copyright (c) 2005, Oracle Corporation.  All rights reserved..
    Oracle Home       : /opt/app/oracle/product/10.2.0/grid_1/db10g
    Central Inventory : /opt/app/oracle/oraInventory
    from           : /etc/oraInst.loc
    OPatch version    : 10.2.0.3.0
    OUI version       : 10.2.0.3.0
    OUI location      : /opt/app/oracle/product/10.2.0/grid_1/db10g/oui
    Log file location : /opt/app/oracle/product/10.2.0/grid_1/db10g/cfgtoollogs/opatch/opatch2009-06-09_09-37-54AM.log
    Lsinventory Output file location : /opt/app/oracle/product/10.2.0/grid_1/db10g/cfgtoollogs/opatch/lsinv/lsinventory2009-06-09_09-37-54AM.txt
    Installed Top-level Products (2):
    Oracle Database 10g Patch Set 3                                      10.1.0.5.0
    Oracle Enterprise Manager Repository Database                        10.2.0.3.0
    There are 2 products installed in this Oracle Home.
    Interim patches (1) :
    Patch  5632264      : applied on Thu Apr 23 12:23:10 CDT 2009
    Created on 8 Feb 2007, 00:38:09 hrs PST8PDT
    Bugs fixed:
    *5632264*
    OPatch succeeded.
    Do you think I should restore the backup (and I only have the database backup, not the Oracle Home backup)?
    THanks.

  • How to submit a batch compare job using a unix script and cron?

    I understand I can setup a unix script to be used to schedule a database compare job. I'm not sure how to get past the popup log in window tho... When I use the command line and include the -id<myid> the OMS login window pops up requesting login password and service. This won't do if I do not want to run this interactive. I cannot find any syntax for the command line other than --id<adminid>  How to I include the password and service?
    Thanks ;)
    Laurie

    I had the same problem.
    My shell looks like (baseline_ELITE.sh):
    ocm login -idsysman
    ocm capture -l BL_ELITE -idsysman
    I don't have the ocm logout.
    First, run the baseline_ELITE.sh, it will ask you about the password. The next times, it never ask again for the password, but take in account don't use the ocm logout.
    Humberto Gomez
    OCP Dev2k, 8i, 9i
    [email protected]

  • Oracle 9i in UNIX (AIX)

    Hi,
    I am new to the UNIX environment. We are installing a 9i suite in a UNIX (AIX) box.
    Is there anyway I can use the Enterprise Manager console in this machine? or do I have to use x-windows?
    How can I access the database remotely from my windows xp machine?
    Thanks a lot,
    Rushdi

    there is another way also, when you install OEM and start Oracle Management server (OMS) on the AIX box. also start the oracle http server.
    you can access from any machine OEM console using the
    http://<webserver_hostname>:port
    the port no should be 3339 for OEM
    http://AIX_HOST:3339 this should bring the OEM web page from where you can launch the Management console.
    you might be asked to do download jinitiator for the first time you access OEM web page from any windows client.
    Mukundan.

  • Weblogic server proces on unix

    How to set weblogic server process as a service in unix like windows service

    1) First verify if the WebTier really down. See instructions in the following MOS note:
        EM 12c: Enterprise Manager 12.1.0.2 Cloud Control status shows the WebTier is Down even though the OMS is Up and Running (Doc ID 1561468.1)
       Note: If the version of your WebTier (Oracle HTTP Server) is 11.1.1.6, it is recommended that you apply patch 13490778 to avoid false alerts on Oracle HTTP server (down status).
    2) The above MOS note includes instructions for starting the Oracle HTTP Server (e.g. ohs1) using command opmnctl. Also, when you run command 'emctl start oms', the WebTier will be started before the OMS. Thus, if restarting the OMS is not an issue, you can run 'emctl stop oms -all' to stop all OMS related processes including the WebTier, then run 'emctl start oms' to restart the OMS along with the WebTier.
    3) See the following doc for guidelines on starting EM12c components:
    Starting and Stopping Enterprise Manager Components
    By default, the OMS and agent are automatically started on host bootup.
    Hope this helps.
    - Loc

  • OMS Start up error

    When starting up the oms on hp-unix I get an error message
    "Could not connect to the OMS: possible error in the configuration file.
    Terminated"
    Can any one pls let me know if there are any configration parameter that has to be set up before using the OMS(Oracle management Server)

    don't know about Unix...on NT there is OMS configuration file
    this is the path on NT:
    Oracle_Home\sysman\config\omsconfig.properties

  • OMS can not start - OMS not compatible with repository version.

    Hello,
    I have Enterprise Manager 11g installed on a Unix environment. The OEM was running successfully at beginning. But after the database was restarted, I got the below error when I tried to start OMS.
    -bash-3.00$ /OMS_HOME/bin/emctl start oms
    Oracle Enterprise Manager 11g Release 1 Grid Control
    Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
    Starting WebTier...
    WebTier Successfully Started
    Starting Oracle Management Server...
    Oracle Management Server is not functioning because of the following reason:
    Oracle Management Server version is not compatible with repository version. Repository needs to be Upgraded.
    I run ./emca -config dbcontrol db -repos recreate, but the problem is still there.
    My database is 11.2.0.1.0
    Grid control is 11.1.0.1
    Weblogic is 10.3.2
    I can open Weblogic Server 11g Administration Console but not /em.
    -bash-3.00$ ./emctl start oms
    Oracle Enterprise Manager 11g Release 1 Grid Control
    Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
    Starting WebTier...
    WebTier Successfully Started
    Starting Oracle Management Server...
    Oracle Management Server is not functioning because of the following reason:
    Oracle Management Server version is not compatible with repository version. Repository needs to be Upgraded.
    Please help,
    Thanks,
    George J

    See note "Oracle Enterprise Manager 10g Grid Control Certification Checker \[ ID 412431.1 \]". There is a nice application which shows all the compatible combinations. Only 10.2.0.4 is supported with 10GR4 OMS (10.2.x repository version).

  • OMS and Intelligent Agent not seeing databases

    I am running Oracle9i on a Solaris box and trying to set up OMS on a PC. I managed to get the intelligent agent started on the Solaris box but now when I do a node discovery, all that I can see is the HTTP servers and they say that they are stopped. How do I see the databases so I can schedule jobs on them?

    If databases are not discovered, you could have a problem with any of the following files.
    listener.ora
    oratab ( UNIX/Linux)
    Microsoft Registry (Windows)
    1. Check the $ORACLE_HOME\network\agent\log\nmiconf.log for warnings or errors.
    2. Verify the database sid exists in the listener.ora file. When the Agent parses the listener.ora, it looks for the "sid_list=...." section. If this section is missing, the Agent will not discover the database.
    3. Verify the database sid exists in the oratab or Microsoft Registry. (In some cases, the sid is case sensitive.)
    4. Stop and Restart the Agent. NOTE: This step is necessary because the Agent will only parse the files during startup.
    5. Check the services.ora file and verify the Database services now exists in the file.
    6. Refresh the Node through the EM Console.

  • Unable to connect to OMS

    when i try to connect to OMS server, i m getting the following error
    VTK-1000 Unable to connect to management server <computername.domainname.com> please varify that you have entered the correct host name and the status of OMS.
    when check the status of OMS through
    oemctl status oms
    getting error
    VXA-2008
    could not locate oracle managment server on node
    . Has it be shutdown?
    while yesterday i was successfully working on it
    please tell what should i do to login it.

    Can't quite remember but maybe you need to start the OMS...if its on NT the one of the Services that runs the OMS (can't remember the name offhand) is maybe set to Manual start and you've rebooted since you last logged in ? If Unix same issue...or maybe it died since last log in.
    I think it can be started by the following but don't have a system handy to check...
    oemctl start
    ta
    J

  • OMS Configuration Failed In the Process of Installing OEM Grid Control 10g

    Hi every one,
    i am getting the same problem in the installation Configuration Assistants, OMS Configuration Failed
    I have already installed the Oracle software, created the databse and when i started installation, i selected the 2nd option to use the existing database.
    here is i am getting the error:
    details says that are as follows
    oui-25031 oracle.sysman.emcp.agent.agentplugin,
    so i followed the steps and drop the sysman user with cacade option
    again i got the same error,
    Environment:
    Microsoft Windows XP Professional SP3,
    Oracle 10G 10.2.0.1.0 (Already Installed)
    Dell Inspiron 530
    Intel(R)Core(TM)2 Quad CPU [email protected], 3.0GB RAM
    have enough hard disk.
    Now installing Oralce Enterprise Manager Grid Control 10g release2 (10.2)
    i have seen the error messages in this forum many are on unix environment.
    any views on windows operating system?
    Thank You.

    hi,
    before you install grid, try and patch the database to a later release, 10.2.0.4
    had this issue in work and patching the db resolved the issue.
    I did install database software only, then patch then create database, then install grid
    regards
    Alan

  • Suggested patches on top on OMS 12.1.0.3

    Hi,
    I colleague of mine suggested applying the following 3 patches on top of 12.1.0.3
    -Oracle JAVA SE home - see http://www.oracle.com/technetwork/topics/security/javacpujun2013-1899847.html
    -Base Platform Fusion Middleware home PSU 12.1.1.0.6 Patch 17071664
    -Oracle Database Management Plug-in home Unix: BP Patch 17366505
    I am hoping to get some comments from the experts as to whether or not these are really required.
    Thanks
    Steve.

    Hi Steve,
    The note suggests recommended patches for different versions of OEM. PSU 4 on top of 12.1.0.2 is the latest PSU as of now.
    As per my knowledge there no PSU released for 12.1.0.3. The note will be updated when PSU for 12.1.0.3 OMS will be released.
    However, you can review the Bundle Patch information in below notes once which should meet your requirement,
    Enterprise Manager 12.1.0.3 Bundle Patch Master Note (Doc ID 1572022.1)
    Enterprise Manager Base Platform Management Agent 12cR3 Bundle Patch Bug List (Doc ID 1580355.1)
    I hope this helps.
    Regards,
    Biplab

  • OEM 12c Web Tier and OMS to start manually

    Hi, when I look at the boot log I see the WebTier and OMS starting automatically. Is there a setting I can change so they would not start during the boot.
    I'd like to have in them in the manual startup mode. Thanks.
    *Starting atd:                                              [  OK  ]*
    sudo exist
    Oracle Enterprise Manager Cloud Control 12c Release 12.1.0.1.0
    Copyright (c) 1996, 2011 Oracle Corporation.  All rights reserved.
    Starting WebTier...
    WebTier Successfully Started
    Starting Oracle Management Server...
    Oracle Management Server is Down
    sudo exist
    Oracle Enterprise Manager 12c Cloud Control 12.1.0.1.0
    Copyright (c) 1996, 2011 Oracle Corporation.  All rights reserved.
    Starting agent ......................................... started.

    Thanks. I was thinking about some emctl setting that would put the oms and agent into manual mode but your suggestion would also work.
    Unfortunately, when looking at the gcstartup file I see a standing out line that I could comment out to prevent automatic startup.
    #!/bin/sh
    #Source Function Library
    #chkconfig: 2345 98 98
    #Description: Manages oms and agent processes
    PATH=/bin:/usr/bin:/usr/local/bin:$PATH
    export PATH
    check_errs()
    #Function. Parameter 1 is the return code
    #Para. 2 is text to display on failure.
    if [ "${1}" -ne "0" ]; then
    echo "ERROR ${1} : ${2}"
    #as a bonus, make our script exit with the right error code.
    exit ${1}
    fi
    su --help > /dev/null 2>&1
    check_errs $? "Exiting: Could not find 'su' at standard locations"
    if [ -f /etc/init.d/functions ]
    then
    . /etc/init.d/functions
    else
    if [ -f /etc/rc.d/init.d/functions ]
    then
    . /etc/rc.d/init.d/functions
    fi
    fi
    if [ -f /etc/oragchomelist ]
    then
         oratab="/etc/oragchomelist"
    else
    oratab="/var/opt/oracle/oragchomelist"
    fi
    if [ -f "$oratab" ]
    then
         for i in `cat $oratab | grep -v '^#' | cut -d ":" -f1`;
         do
         if [ -f "$i/install/unix/scripts/omsstup" ];
         then
              user=`ls -l $i/install/unix/scripts/omsstup|awk '{print $3}'`;
              su - $user -c "$i/install/unix/scripts/omsstup $1";
         else
              if [ -f "$i/install/unix/scripts/agentstup" ];
         then
    user=`ls -l $i/install/unix/scripts/agentstup|awk '{print $3}'`;
              if [ -f "$i/install/oragchomelist" ];
              then
              su - $user -c "$i/install/unix/scripts/agentstup $1 `cat $i/install/oragchomelist | grep -v '^#' | cut -d ":" -f2`";
              fi
              else
                   if [ -f "$i/install/unix/scripts/nfsagentstartup" ];
                   then
              user=`ls -l $i/install/unix/scripts/nfsagentstartup|awk '{print $3}'`;
                        if [ -f "$i/install/oragchomelist" ];
              then
              su - $user -c "$i/install/unix/scripts/nfsagentstartup $1 `cat $i/install/oragchomelist | grep -v '^#' | cut -d ":" -f2`";
                        fi
                   fi;
              fi;
         fi;
         done
    fi

  • Integrating with The OMS  preferred Credentials sub system

    Hi to all ,
    I'm trying to manage the default credentials outside of the OMS repository ,is there a way
    to do so without pushing the credentials via the EMCLI?
    Something like replacing the Stored procedure that dose the Preferred credentials check?
    Thanks a lot,
    Asaf.

    You should be able to store the preferred credentials. You have specified at the beginning of your thread you are using a unix like platform, and you should be able to store them either on windows or on unix like environments. You only have to declare them at the preferred credential section.
    Could you please post the specific error text displayed when you attempt to store the credentials?
    ~ Madrid
    http://hrivera99.blogspot.com/

  • How to delete file from application server(Unix)

    Hi All,
    Using the below code downloading a file from application server(Unix) to client machine. I want to delete the file from application server once it is downloaded to client
    We work on Forms 11.1.1.4.0 and Oracle DB 10g. Client machine are Windows 7.
    BEGIN
      IF webutil_file_transfer.AS_to_Client
      (clientFile => Name_In('global.g_file_name')
      ,serverFile => ls_AppServer_Loc)THEN
      message('Data exported Successfully');
      ELSE
       message('File download from Application Server failed');
      END IF;
    EXCEPTION
      WHEN OTHERS THEN
      message('File download failed: '||SUBSTR(sqlerrm,1,200));
      END;
    I have search for solution on OTN. Few suggested to use HOST.
    Can any one help me how to use Host() built_in to delete the file.
    Thanks,
    Maddy

    Can any one help me how to use Host() built_in to delete the file.
    Host('/bin/rm <complete file path>');

Maybe you are looking for

  • Error in make file

    hi, i m trying to connect with timesten. I have incuded the makefile which is as follows: CFLAGS = "/Iinstall_dir\include" LIBSDM = ODBC32.LIB LIBS = TTEN70.LIB TTDV70.LIB LIBSDEBUG = TTEN70D.LIB TTDV70D.LIB LIBSCS = TTCL70.LIB # Link with the ODBC d

  • More Never ending custom build problems

    One more time / have never seen so many problems with just buying a new computer: Are you our there Harm or others.. Never seen anything like this.. Gigabyte X58-UD5 Motherboard / USB-3 and ESata-3 600 Win-7 Pro 64 bit.. WD eSataV-Raptor 600gb system

  • How to create a podcast?

    I'm so very confused--I've Googled and read the docs, but I can't find a solution for what I'm trying to do, which I imagine is pretty basic.  I'm clearly misunderstanding something. I have a program written that goes to my organization's website and

  • Force a required login in a running wd abap application

    hi folks how can i force the user to make a login in a running wd abap application. background: user is loggid in with a default user and has to be forced to use another userid/password. kind regards, oliver

  • Google Not Working/Popups!?!

    Hi I am running the most up to date version of Snow Leopard and Safari. I haven't been to any abnormal websites or anything, but for some reason sometimes when I'm on legit websites (even Apple) I will click a link and another window will pop up that