On 3250 after 4.14 upgrade, couldn't open Web Brow...
Hi,
I've upgraded my 3250 to 4.14. I've formatted my memory card before upgrading firmware and after upgrade, I've installed Nokia Web Browser. I can see it in my menu. But when I click on the icon, it's not opening. I've tried once hard format the software too. What can be the problem?
Thanks
Hi Mahmet,
Good to know that the C160 is now working.
Maybe you can check the hard drives stataus from System status or run 'version' from CLI.
You can also log a support case for IronPort engineer to look into what could have caused the system interuption if you wish.
Thanks,
Donny
Similar Messages
-
After 7.01 upgrade, can't open PowerPoint files from Mail
After updating 4th gen iPad to iOS 7.01, PowerPoint slides attached to emails won't open. Prior to the upgrade, I could double click on a PowerPoint attachment, which would proceed to download and then open it. It also will not open in Quickoffice either.
Thanks for the response but I think you've misunderstood the problem. I can not open any type of PowerPoint file off my server in keynote. This includes .ppt and .pptx files. (Also includes .doc, .docx, .xls, .xlsx in pages and numbers).
Even if what you said worked it would take forever to go through every file and save them all as ppt 2007. Plus of course, I don't know what files I will need when. There are hundreds of resources I need to access when I'm at home. I need the flexibility to view the files when i need to and on the go. Normally I can download them off my school network on to my iPad in keynote and edit them then I email them back to myself ready to use the next day or to save back to my network. Currently I can not download any Microsoft office file. So I am now forced to have to lug my laptop home everyday, rendering my iPad and iMac useless. I can't pre-empt what I'll need and save it as .ppt as that is completely inflexible and that won't open anyways as this is not an issue with the version of PowerPoint file. This is an issue with how all Microsoft files are downloading from my school network to my iPad and iMac. I want Apple to allow this to work like it used to before the upgrades in operating systems. I wish I hadn't upgraded as it worked perfectly. :( -
After sp1- R2 upgrade, Clients cannot open Software center
Hi
I am in a bit of a bind..
We upgraded from SP1 to R2 (not CU2 just the r2 for starters)
All went well and all clients in our organization have been upgraded.
Unfortunately I've discovered that the software center on the clients can no longer load.
It seems the ccm client is running fine it's just the software center that is not loading when I try to open it.
The error from the software center windows is(translated from Danish so I am unsure of the correct MS wording):
The Software center cannot be loaded. Problem loading the required components. You can try starting the software center later...
Only thing I've found so far that stands out in the logs so far (sccclient_MYDOMAIN@mrt_1.log) is:
<![LOG[Default window boundaries for this size work area are 0,0,1200,750 (Microsoft.SoftwareCenter.Client.SCClient at SetWindowPosition)]LOG]!><time="06:47:16.5761062" date="9-13-2014" component="SCClient" context="" type="0" thread="1" file="">
<![LOG[SetServicePortalLink: Portal URL is set to http://aal-sccm01/CMApplicationCatalog (Microsoft.SoftwareCenter.Client.Pages.UtilityClass at SetServicePortalLink)]LOG]!><time="06:47:16.7331062" date="9-13-2014" component="SCClient" context="" type="0" thread="1" file="">
<![LOG[Unhandled exception was caught. (Microsoft.SoftwareCenter.Client.SingleInstanceApplication at OnGetException)]LOG]!><time="06:47:16.7421062" date="9-13-2014" component="SCClient" context="" type="3" thread="1" file="">
<![LOG[Exception System.Windows.Markup.XamlParseException: Der blev udløst en undtagelse under indstilling af connectionId. (Microsoft.SoftwareCenter.Client.SingleInstanceApplication at OnGetException)]LOG]!><time="06:47:16.7451062" date="9-13-2014" component="SCClient" context="" type="3" thread="1" file="">
<![LOG[ ved System.Windows.Markup.WpfXamlLoader.Load(XamlReader xamlReader, IXamlObjectWriterFactory writerFactory, Boolean skipJournaledProperties, Object rootObject, XamlObjectWriterSettings settings, Uri baseUri)
ved System.Windows.Markup.WpfXamlLoader.LoadBaml(XamlReader xamlReader, Boolean skipJournaledProperties, Object rootObject, XamlAccessLevel accessLevel, Uri baseUri)
ved System.Windows.Markup.XamlReader.LoadBaml(Stream stream, ParserContext parserContext, Object parent, Boolean closeStream)
ved System.Windows.Application.LoadComponent(Object component, Uri resourceLocator)
ved Microsoft.SoftwareCenter.Client.Pages.PageControls.AvailableSoftwareDetailsControl.InitializeComponent()
ved Microsoft.SoftwareCenter.Client.Pages.AvailableSoftwarePage.InitializeUIBeforeDataRetreived()
ved Microsoft.SoftwareCenter.Client.Common.ClientUXMain..ctor()
ved Microsoft.SoftwareCenter.Client.SCClient.Window_Loaded(Object sender, RoutedEventArgs e)
ved System.Windows.RoutedEventHandlerInfo.InvokeHandler(Object target, RoutedEventArgs routedEventArgs)
ved System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
ved System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args)
ved System.Windows.UIElement.RaiseEvent(RoutedEventArgs e)
ved System.Windows.BroadcastEventHelper.BroadcastEvent(DependencyObject root, RoutedEvent routedEvent)
ved System.Windows.BroadcastEventHelper.BroadcastLoadedEvent(Object root)
ved MS.Internal.LoadedOrUnloadedOperation.DoWork()
ved System.Windows.Media.MediaContext.FireLoadedPendingCallbacks()
ved System.Windows.Media.MediaContext.FireInvokeOnRenderCallbacks()
ved System.Windows.Media.MediaContext.RenderMessageHandlerCore(Object resizedCompositionTarget)
ved System.Windows.Media.MediaContext.RenderMessageHandler(Object resizedCompositionTarget)
ved System.Windows.Media.MediaContext.Resize(ICompositionTarget resizedCompositionTarget)
ved System.Windows.Interop.HwndTarget.OnResize()
ved System.Windows.Interop.HwndTarget.HandleMessage(WindowMessage msg, IntPtr wparam, IntPtr lparam)
ved System.Windows.Interop.HwndSource.HwndTargetFilterMessage(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
ved MS.Win32.HwndWrapper.WndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
ved MS.Win32.HwndSubclass.DispatcherCallbackOperation(Object o)
ved System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Int32 numArgs)
ved MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(Object source, Delegate method, Object args, Int32 numArgs, Delegate catchHandler)]LOG]!><time="06:47:16.7491062" date="9-13-2014" component="SCClient" context="" type="1" thread="1" file="">
<![LOG[Exiting... (Microsoft.SoftwareCenter.Client.SingleInstanceApplication at OnExit)]LOG]!><time="06:48:37.5541062" date="9-13-2014" component="SCClient" context="" type="1" thread="1" file="">
Really hoping someone can help here!
Kindest regards, MartinThis is log excerpt from when I open software center until I close it (I accept the error windows)
<![LOG[Starting up... (Microsoft.SoftwareCenter.Client.SingleInstanceApplication at Main)]LOG]!><time="21:23:05.8827861" date="9-13-2014" component="SCClient" context="" type="1" thread="1" file="">
<![LOG[Client is running .Net Version4.0.30319.18444 (Microsoft.SoftwareCenter.Client.SingleInstanceApplication at Main)]LOG]!><time="21:23:05.8867863" date="9-13-2014" component="SCClient" context="" type="0" thread="1" file="">
<![LOG[Current working area is 0,0,1600,860 (Microsoft.SoftwareCenter.Client.SCClient at SetWindowPosition)]LOG]!><time="21:23:05.9277886" date="9-13-2014" component="SCClient" context="" type="0" thread="1" file="">
<![LOG[Default window boundaries for this size work area are 0,0,1200,750 (Microsoft.SoftwareCenter.Client.SCClient at SetWindowPosition)]LOG]!><time="21:23:05.9317889" date="9-13-2014" component="SCClient" context="" type="0" thread="1" file="">
<![LOG[SetServicePortalLink: Portal URL is set to http://aal-sccm01/CMApplicationCatalog (Microsoft.SoftwareCenter.Client.Pages.UtilityClass at SetServicePortalLink)]LOG]!><time="21:23:06.0917980" date="9-13-2014" component="SCClient" context="" type="0" thread="1" file="">
<![LOG[Unhandled exception was caught. (Microsoft.SoftwareCenter.Client.SingleInstanceApplication at OnGetException)]LOG]!><time="21:23:06.1017986" date="9-13-2014" component="SCClient" context="" type="3" thread="1" file="">
<![LOG[Exception System.Windows.Markup.XamlParseException: Der blev udløst en undtagelse under indstilling af connectionId. (Microsoft.SoftwareCenter.Client.SingleInstanceApplication at OnGetException)]LOG]!><time="21:23:06.1057988" date="9-13-2014" component="SCClient" context="" type="3" thread="1" file="">
<![LOG[ ved System.Windows.Markup.WpfXamlLoader.Load(XamlReader xamlReader, IXamlObjectWriterFactory writerFactory, Boolean skipJournaledProperties, Object rootObject, XamlObjectWriterSettings settings, Uri baseUri)
ved System.Windows.Markup.WpfXamlLoader.LoadBaml(XamlReader xamlReader, Boolean skipJournaledProperties, Object rootObject, XamlAccessLevel accessLevel, Uri baseUri)
ved System.Windows.Markup.XamlReader.LoadBaml(Stream stream, ParserContext parserContext, Object parent, Boolean closeStream)
ved System.Windows.Application.LoadComponent(Object component, Uri resourceLocator)
ved Microsoft.SoftwareCenter.Client.Pages.PageControls.AvailableSoftwareDetailsControl.InitializeComponent()
ved Microsoft.SoftwareCenter.Client.Pages.AvailableSoftwarePage.InitializeUIBeforeDataRetreived()
ved Microsoft.SoftwareCenter.Client.Common.ClientUXMain..ctor()
ved Microsoft.SoftwareCenter.Client.SCClient.Window_Loaded(Object sender, RoutedEventArgs e)
ved System.Windows.RoutedEventHandlerInfo.InvokeHandler(Object target, RoutedEventArgs routedEventArgs)
ved System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
ved System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args)
ved System.Windows.UIElement.RaiseEvent(RoutedEventArgs e)
ved System.Windows.BroadcastEventHelper.BroadcastEvent(DependencyObject root, RoutedEvent routedEvent)
ved System.Windows.BroadcastEventHelper.BroadcastLoadedEvent(Object root)
ved MS.Internal.LoadedOrUnloadedOperation.DoWork()
ved System.Windows.Media.MediaContext.FireLoadedPendingCallbacks()
ved System.Windows.Media.MediaContext.FireInvokeOnRenderCallbacks()
ved System.Windows.Media.MediaContext.RenderMessageHandlerCore(Object resizedCompositionTarget)
ved System.Windows.Media.MediaContext.RenderMessageHandler(Object resizedCompositionTarget)
ved System.Windows.Media.MediaContext.Resize(ICompositionTarget resizedCompositionTarget)
ved System.Windows.Interop.HwndTarget.OnResize()
ved System.Windows.Interop.HwndTarget.HandleMessage(WindowMessage msg, IntPtr wparam, IntPtr lparam)
ved System.Windows.Interop.HwndSource.HwndTargetFilterMessage(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
ved MS.Win32.HwndWrapper.WndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
ved MS.Win32.HwndSubclass.DispatcherCallbackOperation(Object o)
ved System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Int32 numArgs)
ved MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(Object source, Delegate method, Object args, Int32 numArgs, Delegate catchHandler)]LOG]!><time="21:23:06.1097990" date="9-13-2014" component="SCClient" context="" type="1" thread="1" file="">
<![LOG[Exiting... (Microsoft.SoftwareCenter.Client.SingleInstanceApplication at OnExit)]LOG]!><time="21:23:10.2580363" date="9-13-2014" component="SCClient" context="" type="1" thread="1" file="">
Kindest regards, Martin -
Before I reset my Firefox I was able to just type words in the Location bar and Firefox would redirect me to the website. For example, typing "reservoir dogs imdb" would redirect to the IMDB page of this movie, and typing a random sequence of characters would take me to (for example) a website of some company that uses these characters as the abbreviation of its name.
I never set this option anywhere, it was just like that for quite a long time. Now this possibility is gone for me and I can't seem to fix it.
I use the laters Mozilla Firefox 21.Starting with Firefox 23 the keyword.URL pref is no longer supported and it is no longer possible to specify the search engine for the location bar that way (keyword.enabled still works to disable this search).
The search engine that is used on the location bar and on the about:home page is the search engine that is selected in the search Bar on the Navigation Toolbar.
You can install the Keyword Search extension to specify with search engine to use for the location bar and which search engine to use for the about:home page via the Options/Preferences windows of this extension, accessible via the about:addons page.
* Keyword Search: https://addons.mozilla.org/firefox/addon/keyword-search/ -
C160 couldn't open after firmware upgrade
Hi,
We have a problem with our ironport C160 product. When we power on the device, it is starting its services and replies pings you can see from (1).
After that, it doesn’t ping no more and web page couldn’t open. For testing this issue, I connected a console cable to the device from its serial port. It starts asyncos services, then gives an error like (2)
Last night, I upgraded its firmware. It took approximately 2-3 hours and when upgrading process finished I rebooted the device. After I opened and saw the new version installed, I shut down the device from CLI.
Today, it couldn’t open. What can it be originated from and how can we solve this problem?
Thanks,
Mehmet.Hi Mahmet,
Good to know that the C160 is now working.
Maybe you can check the hard drives stataus from System status or run 'version' from CLI.
You can also log a support case for IronPort engineer to look into what could have caused the system interuption if you wish.
Thanks,
Donny -
[solved]no keyboard/mouse after xorg-xinit upgrade (startxfce4 broken)
Today's upgrade and subsequent downgrade (with testing repos disabled)
[root@KISE-005 ~]# cat /var/log/pacman.log | grep 2015-03-17 | grep upgraded
[2015-03-17 09:54] [ALPM] upgraded conky (1.9.0-4 -> 1.9.0-5)
[2015-03-17 09:54] [ALPM] upgraded gsfonts (20130917-1 -> 20150122-1)
[2015-03-17 09:54] [ALPM] upgraded libmatekbd (1.8.0-1 -> 1.8.1-1)
[2015-03-17 09:54] [ALPM] upgraded libvdpau (1.0-1 -> 1.1-1)
[2015-03-17 09:54] [ALPM] upgraded mate-desktop (1.8.1-2 -> 1.8.2-1)
[2015-03-17 09:54] [ALPM] upgraded marco (1.8.2-4 -> 1.8.3-1)
[2015-03-17 09:54] [ALPM] upgraded mate-settings-daemon-gstreamer (1.8.2-3 -> 1.8.3-1)
[2015-03-17 09:54] [ALPM] upgraded python-setuptools (1:14.1.1-1 -> 1:14.3-1)
[2015-03-17 09:54] [ALPM] upgraded python2-setuptools (1:14.1.1-1 -> 1:14.3-1)
[2015-03-17 09:54] [ALPM] upgraded vim-runtime (7.4.617-1 -> 7.4.663-1)
[2015-03-17 09:54] [ALPM] upgraded vim (7.4.617-1 -> 7.4.663-1)
[2015-03-17 09:54] [ALPM] upgraded xdg-utils (1.1.0.git20141009-1 -> 1.1.0.git20150302-1)
[2015-03-17 09:54] [ALPM] upgraded xorg-xinit (1.3.4-1 -> 1.3.4-2)
[2015-03-17 09:56] [ALPM] upgraded insync (1.1.5-1 -> 1.2.1-1)
[2015-03-17 09:59] [ALPM] upgraded ttf-google-fonts-git (20140805-1 -> 20150316-1)
[root@KISE-005 ~]# cat /var/log/pacman.log | grep 2015-03-17 | grep downgraded
[2015-03-17 10:56] [ALPM] downgraded libutil-linux (2.26.1-3 -> 2.25.2-1)
[2015-03-17 10:56] [ALPM] downgraded libsystemd (219-3 -> 218-2)
[2015-03-17 10:56] [ALPM] downgraded shadow (4.2.1-3 -> 4.2.1-2)
[2015-03-17 10:56] [ALPM] downgraded util-linux (2.26.1-3 -> 2.25.2-1)
[2015-03-17 10:56] [ALPM] downgraded systemd (219-3 -> 218-2)
[2015-03-17 10:56] [ALPM] downgraded libcups (2.0.2-2 -> 2.0.2-1)
[2015-03-17 10:56] [ALPM] downgraded cups (2.0.2-2 -> 2.0.2-1)
[2015-03-17 10:56] [ALPM] downgraded libssh2 (1.5.0-1 -> 1.4.3-2)
[2015-03-17 10:56] [ALPM] downgraded lib32-libssh2 (1.5.0-1 -> 1.4.3-2)
[2015-03-17 10:56] [ALPM] downgraded lib32-libx11 (1.6.3-1 -> 1.6.2-1)
[2015-03-17 10:56] [ALPM] downgraded lib32-util-linux (2.26-1 -> 2.25.2-1)
[2015-03-17 10:57] [ALPM] downgraded linux (3.19.1-1 -> 3.18.6-1)
[2015-03-17 10:57] [ALPM] downgraded nvidia (346.47-9 -> 346.47-3)
[2015-03-17 10:57] [ALPM] downgraded systemd-sysvcompat (219-3 -> 218-2)
[2015-03-17 10:57] [ALPM] downgraded vim-runtime (7.4.663-1 -> 7.4.617-1)
[2015-03-17 10:57] [ALPM] downgraded vim (7.4.663-1 -> 7.4.617-1)
[2015-03-17 10:57] [ALPM] downgraded xdg-utils (1.1.0.git20150302-1 -> 1.1.0.git20141009-1)
[2015-03-17 10:57] [ALPM] downgraded xorg-xinit (1.3.4-2 -> 1.3.4-1)
After upgrade the keyboard and mouse were unresponsive. Restored by downgrading with testing repos disabled.
Also upgraded today with testing repos enabled was i686 and no anomalies detected.
Xorg.0.log for failed boot is here http://pastebin.com/aarDvve2
Last edited by keepitsimpleengineer (2015-03-24 19:30:45)hello ,
after an upgrade yesterday , it is not possible to launch xfce4 on tty , when i do startxfce4 , i had this error :
xinit giving up
xinit unable to connect to x server ..................
xinit server error
this my xorg log :
[ 198.530]
X.Org X Server 1.17.1
Release Date: 2015-02-10
[ 198.536] X Protocol Version 11, Revision 0
[ 198.538] Build Operating System: Linux 3.18.6-1-ARCH i686
[ 198.540] Current Operating System: Linux eternity 3.14.36-1-lts #1 SMP Wed Mar 18 18:32:14 CET 2015 i686
[ 198.541] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=b52f032b-9579-4da9-9a9b-d15b4dd7e565 rw quiet
[ 198.545] Build Date: 14 March 2015 06:47:44PM
[ 198.547]
[ 198.550] Current version of pixman: 0.32.6
[ 198.554] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 198.554] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 198.564] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Mar 23 10:03:55 2015
[ 198.567] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 198.567] (==) No Layout section. Using the first Screen section.
[ 198.567] (==) No screen section available. Using defaults.
[ 198.567] (**) |-->Screen "Default Screen Section" (0)
[ 198.567] (**) | |-->Monitor "<default monitor>"
[ 198.568] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 198.568] (==) Automatically adding devices
[ 198.568] (==) Automatically enabling devices
[ 198.568] (==) Automatically adding GPU devices
[ 198.568] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
[ 198.568] Entry deleted from font path.
[ 198.568] (Run 'mkfontdir' on "/usr/share/fonts/OTF/").
[ 198.568] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 198.568] Entry deleted from font path.
[ 198.568] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 198.568] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 198.568] Entry deleted from font path.
[ 198.568] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 198.568] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 198.568] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 198.568] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 198.568] (II) Loader magic: 0x829e700
[ 198.568] (II) Module ABI versions:
[ 198.568] X.Org ANSI C Emulation: 0.4
[ 198.568] X.Org Video Driver: 19.0
[ 198.568] X.Org XInput driver : 21.0
[ 198.568] X.Org Server Extension : 9.0
[ 198.570] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 198.571] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 198.571] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[ 198.573] (--) PCI:*(0:1:5:0) 1002:5a62:1043:1402 rev 0, Mem @ 0xa0000000/268435456, 0xfa8f0000/65536, I/O @ 0x00009800/256, BIOS @ 0x????????/131072
[ 198.573] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 198.573] (II) LoadModule: "glx"
[ 198.574] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 198.576] (II) Module glx: vendor="X.Org Foundation"
[ 198.576] compiled for 1.17.1, module version = 1.0.0
[ 198.576] ABI class: X.Org Server Extension, version 9.0
[ 198.576] (==) AIGLX enabled
[ 198.576] (==) Matched ati as autoconfigured driver 0
[ 198.576] (==) Matched ati as autoconfigured driver 1
[ 198.576] (==) Matched modesetting as autoconfigured driver 2
[ 198.576] (==) Matched fbdev as autoconfigured driver 3
[ 198.576] (==) Matched vesa as autoconfigured driver 4
[ 198.576] (==) Assigned the driver to the xf86ConfigLayout
[ 198.576] (II) LoadModule: "ati"
[ 198.576] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 198.576] (II) Module ati: vendor="X.Org Foundation"
[ 198.576] compiled for 1.17.0, module version = 7.5.0
[ 198.576] Module class: X.Org Video Driver
[ 198.576] ABI class: X.Org Video Driver, version 19.0
[ 198.576] (II) LoadModule: "radeon"
[ 198.576] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 198.577] (II) Module radeon: vendor="X.Org Foundation"
[ 198.577] compiled for 1.17.0, module version = 7.5.0
[ 198.577] Module class: X.Org Video Driver
[ 198.577] ABI class: X.Org Video Driver, version 19.0
[ 198.577] (II) LoadModule: "modesetting"
[ 198.577] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 198.577] (II) Module modesetting: vendor="X.Org Foundation"
[ 198.577] compiled for 1.17.1, module version = 1.17.1
[ 198.577] Module class: X.Org Video Driver
[ 198.577] ABI class: X.Org Video Driver, version 19.0
[ 198.577] (II) LoadModule: "fbdev"
[ 198.577] (WW) Warning, couldn't open module fbdev
[ 198.577] (II) UnloadModule: "fbdev"
[ 198.577] (II) Unloading fbdev
[ 198.577] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 198.577] (II) LoadModule: "vesa"
[ 198.578] (WW) Warning, couldn't open module vesa
[ 198.578] (II) UnloadModule: "vesa"
[ 198.578] (II) Unloading vesa
[ 198.578] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 198.578] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
SUMO, SUMO, SUMO2, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
BARTS, BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, VERDE, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
HAINAN, HAINAN, HAINAN, HAINAN, HAINAN, HAINAN, BONAIRE, BONAIRE,
BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE,
BONAIRE, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
KABINI, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS,
MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS,
MULLINS, MULLINS, MULLINS, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
KAVERI, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII,
HAWAII, HAWAII, HAWAII, HAWAII, HAWAII
[ 198.591] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 198.591] (--) using VT number 2
[ 198.642] (II) [KMS] Kernel modesetting enabled.
[ 198.642] (WW) Falling back to old probe method for modesetting
[ 198.642] (II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 198.642] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 198.642] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 198.642] (==) RADEON(0): Default visual is TrueColor
[ 198.642] (==) RADEON(0): RGB weight 888
[ 198.642] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 198.642] (--) RADEON(0): Chipset: "ATI Radeon XPRESS 200M 5A62 (PCIE)" (ChipID = 0x5a62)
[ 198.642] (EE) RADEON(0): [drm] failed to set drm interface version.
[ 198.642] (EE) RADEON(0): Kernel modesetting setup failed
[ 198.642] (II) UnloadModule: "radeon"
[ 198.643] (EE) Screen(s) found, but none have a usable configuration.
[ 198.643] (EE)
Fatal server error:
[ 198.643] (EE) no screens found(EE)
[ 198.643] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 198.643] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 198.643] (EE)
[ 198.673] (EE) Server terminated with error (1). Closing log file.
so i think i have module and/or config problem , what i need to do to recover server X ????
thx . -
The OSX upgrade couldn't be started because the disk is damaged and can't be repaired.
I'm getting the above error message after trying many different "fixes" described on message boards. Here's the issue: I have a Macbook Pro that developed a problem with an endless boot cycle. The solution ended up being to wipe the drive using Disk Utility. I then reinstalled OSX from a Snow Leopard disk, and the computer appeared to be working normally. Then, when I attempted to upgrade to Mavericks from the App Store, I get this message when the computer tries to reboot and install the OS. I have tried verifying and repairing the disk, resetting NVRAM/PRAM, resetting the SMC...but always I get the following error message:
Install Failed
OSX could not be installed on your computer
The OSX upgrade couldn't be started because the dis Macintosh HD is damaged and can't be repaired
Curious if anyone has experienced this problem or has a possible fix. Thanks for your helpI did not verify/repair from Snow Leopard...simply reinstalled then attempted to download/install Mavericks from the App Store. Having seen this suggestion, I've now rebooted into recovery mode, and when I try to verify/repair, it aborts both processes and I get the respective errors: "The volume couldnot be verified completely" and "Error: Disk Utility can't repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files."
-
I have problem with Access Connections on L412 after that utilyty upgrade
I have problem with Access Connections on L412 after that utilyty upgrade in early August. Windows 7 Ultimate/x64.
It stops connecting to WPA2 Enterprise (AES-CCMP), Microsoft PEAP, no server cert, with any credentials I try to use. The same account(s) works with native Intel manager on other notebooks and on mobile devices. I lost the wireless connectivity to enterprise WiFi network.
And, after deinstallation of Access Connections, the inability to connect keeped intact with native Win7 WiFi management.
I think, something was broken in Access Connections 5.83 Build 83C753WW and some registry settings/ dll modules were altered but not returned to normal after deinstall.Access Connections is definitely broken for WPA encryption. Both versions 5.02 and 5.84 fail for me. If I use the Windows XP wireless configuration instead of Access Connections, everything works.
Does anyone know how to report this to Lenovo? I chased links around the web site but couldn't find a place. -
After Effects warning: Couldn't open Quicktime video output component????
Hello,
I was wondering why this warning is coming up every time I open After Effects-
(After Effects warning: Couldn't open Quicktime video output component.)
It also reappears every time I go to a different program then back into After Effects.
I am currently on a-
MacBook Pro running OS 10.5.5
2.6 GHz Intel Core 2 Duo
4 GB 667 MHz DDR2 SDRAM
After Effects CS3
Quicktime 7.5.5
GeForce 8600M GT
2 external storage drives (Western Digital, Lacie)
Matrox MX02
I just upgraded quicktime and this started appearing.
ANY IDEAS.Sorry,
Here;s another. I have Quicktime Pro installed. I have CS3 installed. I also have AE v7 which runs a few plugins I am still thinking work in v7. CS3 runs OK but in version 7 it gives me the "Couldn't open Quicktime Video Output Component " notice. I had a client working in v7 so I tried to work in v7, it was a bad idea. I lost days of work and finally just went to CS3 to get the job done but couldn't use one anothers files between versions.
What can I do to get the AE v7 Couldn't open Quicktime video output component fixed. Make it simple if you can... I'm an artist.
Thanks
jm -
Can't activate after latest iPad upgrade. Error message advises me to go to iTunes but it won't get off the error screen.
I am the original owner of an ipad and it woke it yesterday requiring me to activate it using the original apple id used to set it up.
It will not accept my apple id and password.
It does not show up in my icloud under devices.
I have tried hard restart (home + power) and itunes recovery.
I am out of ideas and have not found anything for original owners (as opposed to someone who bought it from someone else). I did see some posts from last year where a few people had the same problem and took it back to apple and got a refurbished unit given to them since customer service and engineering couldn't fix it. I was wondering if this was related to the recent ios8 upgrade. Anybody else have ideas or same problem before I hike down to the apple store for mercy? -
upgrading from snow leapord to mavericks, i couldn't opened app store, messenger, ibook,FaceTime, maps and other. please help
Try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode
Safe Mode - About
If that doesn't work, do a backup. Boot to the Recovery Volume (command - R on a restart or hold down the option key during a restart and select Recovery Volume). Run Disk Utility Verify/Repair and Repair Permissions until you get no errors. Then reinstall the OS.
OS X Recovery
OS X Recovery (2) -
All Goes to Heck After 5.1 Upgrade
I have been having problems ever since the iOS5 upgrade a few weeks ago and have posted a thread about it as well as posted in the threads of others having similar problems. I have been unable to sync with the cable, though I recently found I could sync wirelessly.
Today I eagerly downloaded 5.1 in hopes it might solve my problems (even though my syncing issue was not one of the 5.1 features listed). At the end of the process, I got an error message that the upgrade couldn't be done. In addition, EVERYTHING had been wiped off my iPad.
The only option was to do a restore. After the restore, I had a small fraction of my apps, NO music, NO books, NO Photos, NO vidoes, etc.
AND, my iPad would not sync -- even wirelessly. It gets to a certain point in the sync, freezes, and then aborts the sync.
I am currenty engaged in a workaround of dragging the icons for my media onto the iPad icon in iTunes. Seems to be working so far. Crossing my fingers.
I know others are having similar issues. Is the only solution another iOS upgrade that doesn't zap everything off my iPad? And how do I know I can trust it not to?Have you considered deleting your backup? Many times this works, but if you only have one backup, you will be removing that backup. These are instructions copied from another discussion.
Launch iTunes with your iPad connected to your computer. Make sure the iPad is listed under Devices on the left side of the iTunes window.
From your iTunes menu bar click Edit/ Preferences then select the Devices tab. (or iTunes/Preferences/Devices on a Mac).
If there is more then one backup available, delete all but one. If you only have one backup - delete it.
Restart your iPad. Press and hold the Sleep/Wake button until the red slider appears. Slide your finger across the slider to turn off iPad. To turn iPad back on, press and hold the Sleep/Wake until the Apple logo appears.
Restart your computer and then Try to sync now.
If you just want to move the backup to another location on your hard drive - without deleting it, and then try to sync, this article tells you how to find out where the backup is located. If you do this - just remove the backup folder. -
Cannot send emails from Hotmail on my iPad appears only after iOS 7 upgrade.
Cannot send emails from Hotmail acc on my iPad, problem occurred after iOS 7 upgrade. Message appears that user name or password is incorrect in settings but they are correct when checked.
Try deleting and reinstalling your Hotmail email account.
-
After brrestore: Couldn't open verify PSE file /oracle/ sid /LASVerify.pse
After a brrestore on same server and <SID> each time that we run cleanup logs from DB13 we see:
BR0801I BRCONNECT 7.00 (32)
BR1301W Error message from likeywlib: likey_init: Couldn't open verify PSE file ("/oracle/<sid>/LASVerify.pse") for writing, errno = 13 (Permission denied).
BR1302W Initialization of license key library likeywlib failed, return code 1
BR1304W Checking SAP license failed at location BrLicCheck-104
BR0602W No valid SAP license found - please contact SAP
BR0805I Start of BRCONNECT processing: cdzkodpr.cln 2008-12-06 22.46.27
BR0484I BRCONNECT log file: /oracle/<sid>/sapcheck/cdzkodpr.cln
It is on a Linux SuSE X64 - Oracle 10.2.0.4 box
Regards.
Ganimede Dignan.> After a brrestore on same server and <SID> each time that we run cleanup logs from DB13 we see:
>
> BR0801I BRCONNECT 7.00 (32)
> BR1301W Error message from likeywlib: likey_init: Couldn't open verify PSE file ("/oracle/<sid>/LASVerify.pse") for writing, errno = 13 (Permission denied).
you <SID>adm user has no permissions to write this file.
Markus -
Exchange mail after iOS 8 upgrade not working
exchange mail after iOS 8 upgrade not working.
I can not get email from my exchange account.
Any suggestion?Just had this issue. I turned WIFI off and it connected fine. Then turned WIFI back on and working as always.
It had something to do with the WIFI conflicting with the exchange server.
Maybe you are looking for
-
Office 2013 std expires in every 2 or 3 days
hi team we are facing a problem of expiration with office 2013 std on window 8 pc Thanks Ghanshyam Pandey 9999561689
-
How do I enlarge the all-day area in iCal?
Hi there, I'd like to have all my all-day events in week-view visible at the same time, but currently I can only see five and a half of them and need to scroll to see the rest. Is there a way to enlarge the all-day area? Thanks in advance
-
HT4210 how connect Mac mini (Mid 2010) to led cenima display?
I have Mac Mini without thunderbolt & i need to connect to new Apple LED display??
-
Create different log file with different schema by spool
Hello, I want to know a way to create a different log file depend on different schema I have two schema on same db server 1) schema kennam/*****/kennam 2) schema koonhey/*****/koonhey by a way, I want to create a different log file name e.g. kennam.l
-
During restore, won't accept iPhone password
my wife's phone got stolen and i was going to replace with mine. she uses my itunes account. i restored my old phone and tried to put her backup on to it but itunes is asking me for the iphone password. i have my in my 4 digit code, her 4 digit co