On 4.3, have AT&T Hotspot plan, not showing up in NETWORK

Any thoughts?
Settings > Network > *No Hotspot option
on 4.3(8F190)
Called AT&T after I did the upgrade to put my phone on the HotSpot $45 plan.
Reset phone multiple times and can't upgrade to 4.3 again. Done everything I know to do short of Restore to factory settings.

I also tried disconnecting the display and adding it back and rebooting - nothing worked.
But here's a bizarre twist: I show "Bluetooth PAN" connected and active, and it's coming from the Thunderbolt display! I can get online. Then I disconnect the network cable from the display, and test again - no network. So somehow, the driver for Bluetooth PAN is totally confused with the display Ethernet. In fact, the Bluetooth PAN shows connected, and "No PAN devices found". So I'm connected to a phantom device.
Maybe deleting the PAN and display, adding back the display, will get it to recognize it properly.
The short of it is I have Ethernet connected now through the display, but using the Bluetooth PAN device driver.

Similar Messages

  • I have an app that does not show up on the left under iTunes.  How do I delete it?

    I have an app that does not show up on the left under iTunes.  How do I delete it from my Iphone 5?

    If the icon exists on your screen, just do a long press on that icon and when the small X appears on top of the app, press it and it will delete it.  As long as this is not an Apple app, since those cannot be deleted.

  • Every time I open a pdf file which includes a javascript, a dialogue box pops up. I have a question why 'Do not show this message again' is not working even I checked on the checkbox. It should block the dialogue next time when I open the same pdf file bu

    Every time I open a pdf file which includes a javascript, a dialogue box pops up. I have a question why 'Do not show this message again' is not working even I checked on the checkbox. It should block the dialogue next time when I open the same pdf file but not working. What is the matter and how can I deal with it?

    I am trying it on Adobe Acrobat Reader 9.2.1. Tried to fix Hex code, and also tried 'edit-preference-trust manager'. I focusing on Adobe registries but still couldn't fix the problem.

  • Please help! I have photoshop and iphoto does not show it in my preferences edit window. How do I get it as an option in my preferences.

    Please help! I have photoshop and iphoto does not show it in my preferences edit window. How do I get it as an option in my preferences.

    I tried it and nothing changed. Even when I right click on an indiviual image all it does is duplicate it. Iphoto seems to be recognizing my external hard drive as an editor......cannot get photoshop except to drag a picture into photoshop from iphoto, and once I have worked on it and saved it to iphoto I cant find it anywhere.

  • Why the content of the Explain Plan not show out?

    Why the content of the Explain Plan not show out?
    I am using Oracle 11g.
    I already ran the utlxplan.sql sctipt and I also set serveroutput on.
    SQL> set autotrace on
    SQL> EXPLAIN PLAN FOR SELECT*FROM DEMO_TABLE WHERE OWNER='HR';
    Explained.
    Elapsed: 00:00:00.67

    When you say:
    My release 10.2 database display the Explain Plan automatically.
    How to make 11.1.0.6 Oracle database to display the Explain Plan automatically.What do you mean? Specifically, what commands are you executing in the 10.2 database, that displays the execution plan "automatically"?
    Are you saying that if you execute the same command in 11.1.0.6, you don't get a similar result? What happens? Do you get an error?
    For both the 10.2 case and the 11.1.0.6 case, post the full output of the commands you're executing, and the result you are seeing.
    Then, maybe someone can help you.
    When you post the output, please encapsulate it in a pair "code" tags, which is the word "code" without the quotes, surrounded by a pair of curly braces {}.
    When you do this correctly, the output looks like:
    This is output from my execution plan run.and is much easier to read.
    Don't be afraid to use the preview tab to see if your message will be posted with the correct formatting.
    -Mark

  • HT203433 I am having trouble moving my music to my new computer. I have enable homeshare. it does not show any files in my homeshare. How do i get them out of the normal files into home share

    I am having trouble moving my music to my new computer. I have enable homeshare. it does not show any files in my homeshare. How do i get them out of the normal files into home share

    Welcome to the Apple Community.
    The following article(s) may help you.
    Moving your iTunes library to a new computer

  • TS3276 Does anyone have problems with sent messages not showing in their Mail? I have two sent folders when really I only want one. Any tips?

    Does anyone have problems with sent messages not showing in their Mail? I have two sent folders when really I only want one. Any tips?

    Not sure if this is a fix, but I tried sending myself a test email from only  the Bcc field, and lo and behold it now shows the Bcc field in all sent item previews;
    ...maybe leaving the 'To' field blank on purpose forced Mail to show it.
    Rebooted the Mail program, still there - rebooted the machine, still there. Hope this is still relevant and it works for you too - J.

  • I have i phone 5s its not showing 4g or lte it only shows 3g... Its a factory unlocked american psc

    I have i phone 5s its not showing 4g or lte it only shows 3g... Its a factory unlocked american psc

    As previously stated: If you are using an iPhone from the US, you will NOT get 4G/LTE service in Russia.
    https://www.apple.com/iphone/LTE/

  • HT201926 Personal Hotspot is not showing

    I have an ipad mini and the personal hotspot is not showing

    Hello Maitham-Qatar,
    If you are not seeing Personal Hotspot then take a look at the article below and start at step 7. Start with resetting the network settings on your iPad and if that does not work then you will need to restore it. Let me know if this works for you.
    iOS: Troubleshooting Personal Hotspot
    http://support.apple.com/en-us/HT203302
    Hope this helps,
    -Norm G. 

  • Forecast Generated from Staffing Plan not showing Actuals Hrs

    Hi
    I am generating Project Forecast based on staffing plan , still it is not showing the Actual Hrs , though I have timecard for the project.
    Following are the steps:
    1. Created a Forecast Plan Type , added to Project.
    2. Created a version where source was Staffing Plan and Revenue Acc Method was Work
    3. Enetered the timecards of 16 Hrs for the Project for the resource (he is part of Planning Resource List added to Forecast) -> Distributed the Labor Cost
    4. Enetred the Project PJR Approved Assignment with total effort of - 100 hrs
    5. Ran PRC: Update Project Performance Data also for this project.
    Now Generated Forecast for this Project , the Resource Assignment line is shown but with only Planned Quantity of 100 hrs and ETC = 100hrs , actuals are not shown.
    Am I missing something here.
    Thanks
    Rahul

    Hi,
    For actuals to be reflected , the PJI summarization processes should be run.
    Thanks,
    Sathish
    www.projectsaccounting.com

  • HT1304 I have an iphone5 and i did the upgrade.  Now all of the music videos that I have purchased on itunes do not show up when the phone is held horizontally.  It is just a picture of album covers.  Any thoughts?

    I have an iphone 5 and I did the upgrade.  Now all of the music videos that I purchased on itunes do not show up when I hold the phone horizontally.  It is just a picture of album covers.  Any thoughts?
    thank you

    someone swapped upgrades.  Phone could have been sold For quick cash. 

  • Songs I have purchased on iTunes are not showing up in my Purchased playlist but are in my iTunes library

    This has only been happening since updating my iPhone 5 to the new IOS 7.0.2  software and it has duplicated a new purchased playlist on my iTunes library. I have tried syncing the iPhone to my computer but still no luck they are not showing up in my purchased playlist.
    In saying that, some songs I purchase do show up in the playlist but others don't or only half of an album shows even though I have downloaded the whole thing. It is driving me crazy!! Has anyone else got this problem and what did they do to sort it?
    Thanks!

    Hi samfergs,
    I'm not sure how the Purchased Playlist decides what to put into it, but if you want to see all of your purchased items, then you need to go to the iTunes Store, and on the right side, under Quick Links, click on Purchased.
    Then, click on the Music (or whatever other purchased items tab you want to look at). If you are looking at Music, click on All Songs, and then on "All" or "Not on this Computer" (depending on what you want to see).
    Cheers,
    GB

  • I have a ringtone that is not showing up in the voicemail list in settings?

    IOS5  Iphone 4
    I have a ringtone that I would like to have a as a ringtone when someone leaves a  new voicemail message.
    The ringtone is installed on the iphone.  I can select it as a ringtone for phone calls in settings........ no problem.....
    But when I go to settings on the iphone, the "new voicemail" ringtone option, the one ringtone that I want to use does not show up in the list.
    All of my other ringtones are available accept the one I want to use? I have a total of 6 custom ringtones. 5 show up in "new Voicemail" drop down...

    Here are the steps, from an Apple note. You said the eject key didn't work and there was nothing to drag to the trash ....
    Try to eject discs using the F12 or eject key on the keyboard.
    If the disc will not eject try dragging the disc icon to the trash.
    If the disc will still not eject, holding down the trackpad or mouse button after restarting the computer should also eject a disc.
    If the disc continues not to eject, reset the System Management Controller (SMC) and try steps 1-3 again.
    If the disc still does not eject, for additional troubleshooting, evaluation, or service pleasecontact Apple, contact an Apple Authorized Service Provider, or make an appointment with anApple Retail Store.

  • I have one app that does not show up in Launchpad

    I have one app, the game Diablo II, that still shows up in my Applications folder as it always has but does not show up in Launchpad when I pull that up in Lion.  All of my other apps are there in Launchpad... but not this one.  Any idea how I make an app that I can see in my Applications folder show up in launchpad also?

    If the icon exists on your screen, just do a long press on that icon and when the small X appears on top of the app, press it and it will delete it.  As long as this is not an Apple app, since those cannot be deleted.

  • Crystal Reports Viewer seems to have data - but it is not showing

    I am developing on a Windows 7 box and publishing a VS2010 web application to a Windows 2008 server.
    On the server I have installed CRforVS_redist_install_64bit_13_0
    Reports are stored in a folder on that server.
    When I run the application on my local machine the report displays okay via the Crystal Reports Viewer on a .aspx page.
    When I run the application on the server, if I view the source of the page that contains the Crystal Report Viewer - it seems to have fetched the report okay. But it is not showing on the screen. I was thinking this might be because it can't find the 'style.css' file but on both the development machine and server all the various folders and files in and under crystalreportviews13 are present in aspnet_client/system_web/4_0_30319/
    When I view the source of the pages that display the report - they seem to be identical both when viewed on my development box and when accessing the app directily on the server. But, on the .aspx page displayed by the server, the page is blank in the browser. Yet, as I say, when you view source all the data is there.
    What am I doing wrong? Thanks for any help.
    Edit: In both cases if you View Source the page is showing this:
    <link rel="stylesheet" type="text/css" href="../aspnet_client/system_web/4_0_30319/crystalreportviewers13/js/crviewer/images/style.css" />
    On my development box this makes sense. The web site in question is below 'Default Web Site' - i.e. it is at the same level in the folder hierearchy as the aspnet_client folder.
    But on the server, the site is a subweb below a web site that is level with Default Web Site. So I figure the files are not being found. How can you tell the Crystal Reports Viewer that the files it wants (like style.css) are not where it thinks they are going to be?
    So the app is looking for a file at the same level.
    But on the server there
    Edited by: Steve Rowson on Jun 1, 2011 5:31 PM

    Post to the SDK forum

Maybe you are looking for