On 6u13, new plug-in fails to load on Windows 2003 and IE7

I'm attempting to load an applet in IE7 with an OBJECT tag in Windows 2003. This is a mature product that has, for this release, moved from 5 to 6. The CLSID was changed from the CAFEEFAC one for any version of 5 to the one for any version of 6. Java 5 version worked fine on Windows 2003. Now, on some, but not all, of our 2003 systems the ActiveX control for the new Java Plug-in fails to load.
These configurations work:
- Windows XP and any Java and any IE
- Windows 2003 and Java5 and any IE
- Windows 2003 and Java6, old plug-in, and any IE
- Windows 2003 and Java6 and APPLET tag and any IE
This one doesn't...on some machines:
- Windows 2003 and Java6, new plug-in, IE7, OBJECT tag
This is not a security problem. If I turn off the new style plug-in in the control panel, it works. However, I'd really like to avoid doing this, as the new plug-in has much needed features. Also, the APPLET tag works where the OBJECT tag doesn't. I can implement this change if needed, but it would be fairly painful and I'd prefer to avoid it.
Does anyone know why this might be happening? Is there a good way for me to diagnose this? The browser is quite silent as to what the error might be.
I appreciate any help. This one is truly vexing me!

Okay, I'm wrong...I thought I could move to APPLET tags...I cannot. LiveConnect from JavaScript to Java does not support APPLET tags, only OBJECT tags. This makes my problem worse, as I don't have any recourse so far, except to disable the new plugin.
However, this did lead to a clue: disabling the new plugin caused it to work again. When the new plugin was re-enabled to see it fail again, much to my surprise, it worked! Does anyone know what flipping that option actually does? Registry change or something else?

Similar Messages

  • Error  '"Shockwave Flash", but the plug-in failed to load successfully

    Hi, some help please. I'm not very technical on macs so I need somebody to help with as much detail as possible. I use the browser Safari 1.3.2 but it will no longer display flash content, instead I get the lego box with a question mark in it and the error message '...“Shockwave Flash”, but the plug-in failed to load successfully'. I've checked some discussion threads but they are beyond my realm of comprehension - I am but a simple man in need of help. Please help. Please. Somebody...

    Hi neonhook,
    First of all, Welcome to the  Discussion forums!
    "I am but a simple man in need of help."
    Trust me, there are a lot of us around here like that
    If possible, I would suggest using a different browser such as Camino 1.6.4 or even Firefox 2.0.0.x (but keep in mind that Firefox 2.0.0.x will only be supported fully using 10.3.9 until mid-December 2008 and Firefox 3.0 is for OS 10.4 and above only.
    Both Camino and Firefox can be customized to look and feel a lot like Safari and have many features that Safari 1.3.2 does not. I use Camino and find it faster and with no crashes due to flash web content etc. You'll be able to use sites such as Google Maps again, etc.
    Safari for 10.3.9 is no longer being supported and to use a newer version of Safari you would need to upgrade your OS to at least 10.4 and above.
    hope that helps some and post back with comments and questions,
    littleshoulders
    PS. Please post back if any of the above information is too confusing as I do understand it can be.

  • Plug-in failed to load successfully

    QT 7.5, Leopard 10.5.4, MacBook, installed via software update, reinstalled with direct download. Any QT web content gets error message "...attempted to load an internet plug-in named "Quicktime Plug-In 7.5", but the plug-in failed to load successfully."
    No QT movies on web load. ITunes store QT trailers don't play in iTunes. Downloaded trailers play in iTunes. Downloaded trailers play in QT player.
    I've repaired permissions, reinstalled, etc, etc. This issue apparently has happened to others. Any solutions?

    Yes, I've run the gamut.
    I'm not new to the dance. I wouldn't normally even download the app directly, but it seemed a logical approach to sidestep anything software update might introduce. I have several (>10) Macs of all flavors -- this is the only one exhibiting this issue. Leopard was cleanly installed. User data imported from G4 iBook via FireWire using the OS installation dialogue. Again, something that's worked fine in the past, even from G4 to Intel flavor.
    Scratching my head here.

  • Plug-in failed to load successfully - QuickTime Plug-In 7.2

    When I try to open Steve Jobs' Quicktime presentation, I get the following error message:
    *The page “Apple - QuickTime - September 2007 Keynote Address” attempted*
    *to load an Internet plug-in named “QuickTime Plug-In 7.2”, but the plug-in*
    *failed to load successfully.*

    I have exactly the same problem, just bought a new iMax 24" 2.8Ghz and bingo cant view any trailers off the Apple site.
    Anyone got any ideas?
    Thanks

  • Plug-In Failed to Load?

    When I try to run the i phone promo piece, I get this message:
    The page “Apple - iPhone - A Guided Tour - Medium” attempted to load an Internet plug-in named “QuickTime Plug-In 7.2”, but the plug-in failed to load successfully.
    I've already install QuickTime 7.2 two different times, and I get the same result.
    So, what do I do?

    When I try to run the i phone promo piece, I get this
    message:
    The page “Apple - iPhone - A Guided Tour - Medium”
    attempted to load an Internet plug-in named
    “QuickTime Plug-In 7.2”, but the plug-in failed to
    load successfully.
    I've already install QuickTime 7.2 two different
    times, and I get the same result.
    So, what do I do?
    Go to Macintosh HD>Library>Internet Plug-ins and remove QuickTime Plugin.webplugin
    Make sure you get the right one, ie the one with .webplugin file extension
    But don't trash it yet!
    This worked for me.
    iMac G4   Mac OS X (10.4.10)  
    iMac G4   Mac OS X (10.4.10)  

  • Solution to "Quicktime Plug-in failed to load" error

    My solution to "Plug-in failed to load" error message when attempting to watch demo movie on Apple website (and others):
    I found two Quick-time plugin.plugin files in my Internet Plug-ins folder in my
    User Library folder. One was version 6.3 and one was version 6.5.2.
    Removing the 6.3 version solved the problem. Removing the 6.5.2 version had no effect, so I removed it also.
    Never could have solved this one without the help of Woody at Apple!!!!

    Why not install version 7?

  • Flash plug-in fails to load

    I have tried for two days to sort this problem.
    I cannot get flash to work and the message I keep getting is
    that the plug-in failed to load.
    I am using Mac OSX.
    Have tried logging in as root. reloading, any suggestions.
    AP

    I'm having the same problem. I'm using Mac OS X.3.9
    w/ Safari 1.3.2

  • I uninstalled older version of Itunes because for some reason it wouldn't start. I installed new version 10.7 for 64 bit (windows 7) and it WONT RUN either. help please

    I couldn't get my 10.6 version of Itunes to open, so I uninstalled it. Installed newer version 10.7 for 64 bit (windows 7) and it won't run either. Please help?

    Many thanks.
    With those symptoms, I'd try the following document:
    Apple software on Windows: May see performance issues and blank iTunes Store
    (If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

  • Photoshop CS4 for Mac What can cause the error: Plug-in failed to load - NO VERSION

    With Photoshop CS4 for Mac I install the Kodak Plug-in DIGITAL GEM Airbrush Professional v2.1.0. When Photoshop starts I get an error:
    Plug-ins that failed to load:
       DIGITAL GEM Airbrush Professional v2.1.0 NO VERSION -  - from the file “DigitalAIRProv2.plugin”Flash:
       Connections
       Kuler
    This plug-in works fine on my Mac Pro with Photoshop CS4 and OS 10.6 but fails on a new Macbook Air.
    Reinstalling the plug-in did not make any difference. What can cause this error?

    Thanks Chris, That was my first thought too but this same plug-in works on another installation of CS4. This is a Mac installation and the plug-in is Universal so it should work. Is there any other possible cause for this error? Would Photoshop refuse to load a plug-in in a low memory situation?
    Also, The Flash extensions:Connections and Kuler are working OK, I just copied a little more out of the System Info report than I needed to.

  • Shockwave Plug-ins failed to load successfully?

    I am going crazy tryin to figure out why safari hasn't been able to load shockwave plug-ins, it never use to have this problem before and now every time a new page opens, safari pops up a window saying that the plug-ins haven't loaded success fully. This effects the video and audio features that usually work. I have already checked the security preferences and everything is enabled. If any one knows anything about this or how i can solve this problem, PLEASE let me know! thanks!

    Welcome to Apple Discussions
    Have you tried reinstalling the plug-in? To do so, go to your Internet Plug-ins folder (either in your main or User Library) and remove NP-PPC-Dir-Shockwave. If neither Library has Shockwave, then you've found your problem. In either case, a fresh version is available here..
    Also, sometimes, two Shockwave plug-ins are unintentionally installed, one in each Library. If so, remove one of them, as they would conflict. Then try a Shockwave site again. If no go, reinstall as above.
    iMac G5 Rev C 20" 2.5gb RAM 250 gb HD/iBook G4 1.33 ghz 1.5gb RAM 40 gb HD   Mac OS X (10.4.8)   LaCie 160gb d2 HD Canon i960 printer, Airport Express (2 units)

  • Encore CS5 fails to load in Windows 7

    I have been using a trial version of Premier Pro CS5 and today paid up to get a S/N and registered.  Premier loads fine and seems OK at first glance, but Encore CS5, which looks as if it came in the package, fails to load.  It freezes at the loading graphic with the 'Initializing transcoding' apparently stuck.  Is Encore not included in the package I paid for or have I missed something?

    Well...  this is what I found out and what I did to "fix" my problem.  First my situation was that I had 2 drives, a lite-on blu-ray rom drive that was supposed to basically read anything, and a pioneer blu-ray burner.  I was going to use the rom drive to do my reading and reserve the burner for just that, burning.  What I found out, because Encore would freeze when loading, was that Adobe uses a Roxio routine to go out and get the information about all the drive in the environment to know how to use said drive(s) for this session.  The Roxio routines hang in an endless loop, for me, on the rom drive.  When I go into device manager and disable the rom drive, Encore loads just fine and I can master... whatever, and burn or create ISO images and go on my merry way.  When done, I can re-enable the drive and use it as intended except for trying to use it in Encore.
    This happens in CS3, CS4, CS5, and I think I tried it in CS5.5.  Roxio never has "fixed" the problem.
    My fix to fix the problem.. I replaced the blu-ray rom drive with another pioneer burner.  Turns out the new drive was a newer version.  So I moved the older version pioneer to the lower drive letter and use it as the reader drive for anything and setup the newer pioneer drive as my burner drive.  Encore loads with both drives enabled, I can master anything, and eveything works fine.  I've given up trying to have a rom drive for "just reading".
    Also, given up testing to see if Roxio has ever "fixed" thier init routines for Encore.  It always works this way with 2 burners on my system.  One I use as a "reader" all the time which is also my backup burner and one as my "production" burner. And BTW, I usually build on ISO image with Encore and use Image Burn to burn my multiple copies output.
    This is my "fix"!!

  • Call Library Function Node 'Wrapper.C​reate': Library not found or failed to load. using windows 7 64 bits

    Dear all
    I try to interface my spectrometer (NIRquest from ocean optics) using labview on my 64 bits cumputer using windows 7.
    I have absolutely no problem to run the spectrometer with the program dedicated to the spectrometer (called Spetrasuite).
    I've installed "OmniDriverSPAM-1.66-win64-development-installer.e​xe" and everything went right.
    When I select a VI in LabView (e.g."wrapper_create.vi") from the wrapper.llb, LabView returns an error :
    "Call Library Function Node 'Wrapper.Create': Library not found or failed to load."
    I chek the call library function, but everyting seems to be right :
    I use LabView 8.6.1 and my others *.vi are running perfectly...
    Do you have any idea from where does the problem comes ?
    Thank you very much

    Hello Flanguy,
    In addition to smercurio_fc's feedback I can confirm that LabVIEW 8.6.1 doesn't exist in 64-bit version.
    Officially, LabVIEW 8.6.1 doesn't support Windows 7 either.
    The minimal version of LabVIEW you would need to both support Windows 7 and exist in 64-bit version is LabVIEW 2009 64-bit or any 64-bit versions which are more recent.
    In the two links (1 & 2) you can find more background information.
    Kind Regards,
    Wouter
    National Instruments Belgium

  • HT4528 Is there a way of deleting the 16,000 verizon technician allow on my i phone when he set up the new verizon settings.  Like loading to the computer and then erasing all, which you cannot do on the phone

    Is there any way of getting rid of the 16,000 e mail on my 4s by load onto the computer and then deleting all.  The  phone only allows you to delete one at a time.

    Delete the account and all the emails will go with it.

  • New 2014 Carbon X1 Multitouch difference between Windows 7 and Windows 8

    Hi guys, 
    I've a T430u on windows 8 and I find windows 8 extremely unusable with settings and patterns all over the show. 
    I want to buy the new carbon x1 and I'd love to have it with windows 7 professional, but I'm wondering if there are any feature/hardward disadvantages to running windows 7 instead? 
    Would the touch screen still work for example? Fingerprint? As soon as I get a reliable answer on this, I'll place the order, cant wait!!! 
    Thanks!! 

    the keyboard Function Row strip has less feature. Also Win 7 uses 2 touch points, rather than 10 touch points like on the Win 8. So touch experience is worse.
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • AS Proxy Plug-In for IIS 6.0 Windows 2003

    Any ideas when and what version of the Application Server Proxy Plug-in will work with IIS 6.0 / Windows 2003.

    Hi I am attempting to install IIS on one server with another server using Oc4j standalone can and the server dosnt seem to respond. Can you give me any insight on how to get this to work or if it can ?

Maybe you are looking for

  • Without loops how can i read data from associative Array??

    Hi all, I am facing scenario like... i need to read data from associative array  without using loops is it possible, CREATE OR REPLACE PACKAGE BODY test_pkg IS     TYPE t1 IS TABLE OF NUMBER INDEX BY BINARY_INTEGER;    -- in array we can expect more

  • Connecting my stereo to my iMac???

    It's seems like a simple question, but not to me. I have an about 7 year old Panasonic compact stereo (CD changer, tuner, even dual cassette player, a real antique). I do know there's a setting for "Games", but I've never used it (I never had a game

  • Link color won't use 'default'

    Hi, I've used a DW template and built my pages from there.   Several links on all pages in different colors.   When designing, the proper color chosen, does show.  When I go to Page Properties to make the link categories (rollover, viewed, etc.) the

  • How to post back for activity confirmation

    Dear QM guru here, I have QM order link to inspection lot, order type is QL01. during i record result, i also confirm activity of labor processing. my problem is the screen of confirmation activity have only 3 field can input. 1. activity quantity 2.

  • Java.rmi.NoSuchObjectException: Session has timed out or was invalidated

    I am getting error in subject when my application is not using Statefull Session Bean for sometime(20 Minutes or so). What i understand is that after session bean is passivated and next time some method is invoked, it is throwing this exeception. My