ON 8/12/2015 BLOOMINGDALES IS CLOSING MAJOR PURCHASE, SPECIAL EVENT AND CLUB ACCOUNTS

After getting approved for a Bloomingdales Major Purchase for $3,000 last month. I just recieved a letter in the mail that they are now going to be shutting down the above mentioned programs on 8/12/2015 and rolling the balances into your current revolving account. APR stays the same and no interest programs stay the same and shows under revolving as promotional apr or zero interest. What is does not make clear is if the total credit line is transferred into the revolving account or just your current balance? We all know Macys is already in process of doing this since they are both with DSNB. Hope to get some answers on the total credit line issue.

I believe you'd need to have balance in order for that to be rolled into your new combined limit. That is my interpretation of the literature sent out. That is the direct opposite of what a CSR told me during a chat, saying all credit lines will be rolled into one. According to her, I'd have a $7700 CL, but I'm counting on only having $2700. If I get the extra $5k that'd just be a bonus.

Similar Messages

  • Macy's and Bloomingdale's CLI and Special Events Approval!

    After hearing about the generosity of Macy's and Bloomingdale's, I decided to give it a go. I called Bloomingdale's first, hadn't had an increase yet asked to go from $800 to $2,000.They approved for $2,000, should have asked for more.......Then I asked for a Special Events Account and got $5,000 Next up, Macy's went from $600 to $1,000, go figure.........Then asked for the same Events Account and got another $5,000............WHEEEEEEEEEEEE!!!!!Love this garden thing. You guys are amazing! Never would have known.Looking forward to those combined limits in a few months! 

    Anomalous wrote:
    Swampy99 wrote:
    Are mattress and furniture purchases considered special event or major purchases? I bought a mattress Monday on what was called a type 32 account in which I was approved for $5800. The mattress was $1280. That would be terrible if they add the $1280 to my revolving limit and drastically raise my utilization.  Macy's is known to be aggressive when it comes to getting people in the store and pushing them to use credit cards in order to get discounts.  Anyone have inside scoop as to why this change is better for them. So next month you have to call credit on all major purchases instead of having a preapproved limit. Why????Mattresses and furniture can be considered a special event purchase if there is a financing offer going on. I used my SE account to purchase my mattress during the current event. I wouldn't have known the difference if I hadn't talked to a CSR prior to the purchase. I was going to buy a set when they had the $1 box spring deal, but she told me I couldn''t used my SE account then and would have to wait to until June 12th. That's when the current event started. Thanks for taking the reigns on that. The reps are beginning to go through training on how to explain this very complex issue. 

  • Report generation toolkit and signal express user step : problem of closing reference in "Stop" event

    Hi all,
    I'm trying to make a package of Vis to easily make Excel reports with Signal Express. I'm working on LabVIEW 8.2.1.
    I'm using the report generation toolkit, so I build a .llb from my project which contains all the hierarchy of my steps, but also the hierarchy of dynamic VIs called.
    I have made some steps, like "Open Workbook", "Write Data", etc.
    My steps run well, excepts one step : "Close Workbook".
    If my "Close Workbook" step is firing on "Run" Signal Express event, I have no error, so my reference is properly closed.
    But if my "Close Workbook" step is firing on "Stop" Signal Express event, I have an error "1", from "Generate Report Objectrepository.vi".
    I feel that I'm trying to use a reference which has been killed in the "Stop" step...
    I would like to know what exactly do Signal Express on "Stop" event and why my close function does'nt run well.
    Thanks,
    Callahan

    Hi Callahan,
    SignalExpress (SE for short) does the following on the Stop event:
    1. Takes the list of parameters that SE found on your VI's connector pane, and sets the values that the user set from the "Run LabVIEW VI" configuration page, if any.
    2. Then tells the VI that SE is running the Stop event by setting the Enum found on your VI's front panel. This in turn should produce some boolean values telling your VI to execute the Stop case.
    3. The VI is then run, with those values and states.
    4. SE checks to see if any errors where returned.
    5. Since this is the Stop event, SE releases the reference to the VI which it possesses.
    Questions for you would be, is the reference to your Workbook linked to a control on your connector pane, or held in a uninitialized Shift Register. If it's held in a Shift Register, SE would not be aware of it, and would not be able to affect that reference.
    Hope that helps. Feel free to post your LLB if it doesn't.
    Phil

  • When i try to open week cal it loads and then closes after a few seconds...I have checked for updates, turned the phone off then on, closed out of the app and then opened it again...nothing works!  Any suggestions?

    When i try to open week cal it loads and then closes after a few seconds...I have checked for updates, turned the phone off then on, closed out of the app and then opened it again...nothing works!  I have thought about deleting the app from my phone and then reloading it again but I worry that it will delete all my calendar info???  Any suggestions?

    To reset, press and hold the Home and power buttons until the silver apple appears.
    I would delete the app, reset the phone and then download the app again. Your calendar information should be stored on the phone as Week Cal uses the Calendar app information.
    Best of luck.

  • Why does closing all open windows (15) and leaving only one drop ram usage from 1.5 to 1.4Gb and not more.

    Why does closing all open windows (15) and leaving only one drop ram usage by only 100mb from 1.5 to 1.4Gb.
    What is in this 1.4 gb ?
    I don't care much about ram, It's just that cpu usage spike like crazy by the end.
    ''Edited to remove swearing - TonyE''

    Hi musicfan,<br />Sorry you are having problems with Firefox. Maybe you should have asked earlier and we could have fixed it.
    Reading your comments I do not see that rolling back to an insecure Firefox 22 will actually help you much. You are probably best using IE, unless you have also damaged that.
    *[[Export bookmarks to Internet Explorer]]
    You should not use old versions they are insecure. Security fixes are publicised and exploitable.
    * [[Install an older version of Firefox]]
    * https://www.mozilla.org/security/known-vulnerabilities/firefox.html
    Most others will not be having such problems. We are now able to say that with confidence because after developers missed a regression in Firefox 4 telemetry was introduced so that data was obtained. It may be an idea to turn on your telemetry, if you have not already done so, and decide to stick with Firefox.
    *[[Send performance data to Mozilla to help improve Firefox]]
    Trying safe mode takes seconds. Unfortunatly if you are not willing to do even rudimentary troubleshooting there is not anything we can do to help you.
    *[[Troubleshoot Firefox issues using Safe Mode]]

  • I just updated my iPhone 4s to iOS7. I had an old iCloud account on it that I have closed. How do i delete the account on the iPhone and update it to my new account?

    I just updated my iPhone 4s to iOS7. I had an old iCloud account on it that I have closed. How do i delete the account on the iPhone and update it to my new account?

    I keep having this problem too, no one seems to know how to fix it. Can't delete the account without turning off the 'find my iphone' app. Cant' turn it off without the ID....it's a vicious cycle.

  • Is there any way I can get back to ios6 on my iPad? The new ios7 is a major disappointment, especially visually, and would love to "downgrade" back to ios6. Any advice how to do this?

    Is there any way to downgrade back to ios6 from the new ios7? I made a major mistake in downloading the new operating system. It is a major disappointment, particularly visually, and would love to get back to the more user friendly ios6 on my iPad. Last time I experienced a similar disappointment was when I tested the new Microsoft 8. In that case I was luckily able to stick to the previous operating system.

    Thanks. Pitty, seems like Apple suddenly created more competition for itself. The edge is gone and Apple is also now into "art for art's sake".

  • What are the major differences between BODS and Talend ?

    Hi Friends,
    We had a client meeting 2 days back regarding BODS project, But our client is showing more interest on Talend. We have explained/demo him on BODS.  Could any one please tell me, What are the major differences between BODS and Talend ? What are the features of BODS which are not there in TELEND ?
    Thanks,
    Bheem.

    Hi,
    If you talk difference than Talend is an open source. SAP DS as huge advantage when it comes to loading data into SAP and it is more flexible with lots of inbuilt features and easy to load data into SAP using DS directly and extracting data from various legacy systems.

  • Want to display no. of ser. orders closed with in 1 day and outside 1 day

    Hi Experts,
    Im displaying a summary report for Closed call.
    I want to display the Number of Service Orders Closed With in 1 day and Out side 1 day.
    For example:
    Brand......ASP...................With in 1day...............................Outside 1 day
    ABC1........ALPHA Tec...........24................................................5
    BCD2..........BETA Tec.............76................................................7
    The difference of days I have brought using 2 variables (1. is for closed date and 2. is for service order created date)
    In the Formula Variable I have (Subscrated Closed date - Created Date)
    I'm not very sure how to bring the count of the service order that are closed with in 1 day and outside 1day.
    Please help.
    Thanks

    Hi,
    This could be achieved through Data model level as well:
    1. By assuming you have two date char Created date and closing date.
    2. Create a char (On-time) flag and populate flag by ABAP coding if Closing - Created = 1 then field should be Check ("X").
    3. Restrict your report with this Flag to find out number of Service orders on-time.
    4. Define a counter KYF in your data model and maintain fixed value = 1 in your cube / ODS.
    This is one approach let me know if any further information is required.
    Regards,
    Venkat

  • Closed Captioning for TV shows and more movies

    I too hope that Apple will add closed captioning to more movies and TV shows.  Especially for all it's customers who have been blasting songs into their ears from their ipods.  The hearing impared population is growing!

    I too hope that Apple will add closed captioning to more movies and TV shows.  Especially for all it's customers who have been blasting songs into their ears from their ipods.  The hearing impared population is growing!

  • Created and closed A/R credit memo and A/R invoice

    Hi All,
    How to know who has created and closed A/R credit memo and A/R invoice ? I see
    the credit memo sometimes created based on A/R invoice but none the user's create
    it. Tks.
    Rgds,

    Hello,
    you could use change log, from tools --> change log to see who has closed or created a certain document. It is a history record tools. It is from ADOC, OUSR and other related tables.
    Rgds,

  • Major differences between GL and New GL concepts

    Hai,
    Please let me know the major differences between old and new gl concepts and if possible explain with few examples....
    Thanks in advance.....
    Regards
    Moderator: Please, read and respect SDN rules

    Hi
    Refer to the link below-
    http://www.sap.com/solutions/business-suite/erp/financials/pdf/BWP_New_Gen_Ledger_Acct_Functions.pdf
    Regards
    Milind

  • The "organize bookmarks" section has disappeared from my bookmarks dropdown. I want to export my list as back-up prior toan overhaul. No major changes have been done to account for it. in English

    The "organize bookmarks" section has disappeared from my bookmarks dropdown. I want to export my list as back-up prior toan overhaul. No major changes have been done to account for it. in English
    I have tried the usual suspects to no avail - the item remains stubbornly hidden

    It's called "Show All Bookmarks" now. You can also open it by pressing CTRL+SHIFT+B

  • Three major differences between 10gR2 and 11GR1

    If you were asked to name three major differences between 10gR2 and 11GR1. What would it be?

    Hi,
    Please check:Database
    Hope helps.
    Regards,
    X A H E E R

  • HT2693 i am downloading a software update, but at the last moment before it finishes, it says in order to continue, please close the following application: safari, and the application is closed, what do they mean, and what should i do?

    i am downloading a software update, but at the last moment before it finishes, it says in order to continue, please close the following application: safari, and the application is closed, what do they mean, and what should i do?

    You should close safari.

Maybe you are looking for