On a G5 computer I can't log in I get dots in the login in field

I turned on my computer and I get dots in the login field and can't enter my password.  G5 running Leopard.

Hi Amy,
Have you tried just hittng enter at that point?
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.

Similar Messages

  • I need help with resetting my ichat. When i try to login now it wont let me... it says "AOL Instant Messenger password" and then "iChat can't log in to ... because your login ID or password is incorrect. How do I reset this if I cant log in?

    I need help with resetting my ichat. When i try to login now it wont let me... it says "AOL Instant Messenger password" and then "iChat can't log in to ... because your login ID or password is incorrect. How do I reset this if I cant log in? When I try to press online the same thing pops up and I have no way of logging in or asking for help.

    Hi,
    iChat (it would help to know which version) can accept Apple IDs as valid AIM Screen Names.
    However if you have iChat 5 or earlier you cannot use ones ending in @me.com or @icloud.com issued by iCloud. (they can be used in iChat 6 or Messages as these versions make a double login to AIM and Apple to allow the use of the password).
    In addition if you are using an Apple ID for an AIM Screen Name the password still needs to keep to the 16 character limit that AIM has.
    AN @mac.com name can be used on any version of iChat  (Until the 30th June 2014)
    As it does not need a double check with Apple you can use it to log in to the AIM Web pages
    Login here with an AIM Name registered at AIM or and @mac.com name and see if you get any suspended account messages.
    Sometimes account can be suspended. Usually because something has triggered the "Unusual Activity" item.
    About a year ago many @mac.com users that travelled out of their own country found themselves suspended when they got home.
    If the Name checks out of if an Apple ID the password in known to be 16 characters or Less then do this:-
    In Lion upwards open a Finder Window and use the Go Menu whilst holding down the ALT key.
    Select the Library that appears in the menu list.
    Navigate to Preferences.
    (If you have version earlier than Lion the just navigate to ~/Library/Preferences (that's the Library in you Home - Little House icon - folder)
    Fnd com.apple.ichat.aim.plist (even if you are using Messages)
    Drag the file to the Trash and Restart the app.
    7:39 pm      Thursday; May 29, 2014
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • I am trying to connect my fathers ipod touch to itunes on my computer, how can i sync itunes on my machine with the ipod such that his songs don't get deleted and i could add new songs to it (mp3 on my computer)

    I am trying to connect my fathers ipod touch to itunes on my computer, how can i sync itunes on my machine with the ipod such that his songs don't get deleted and i could add new songs to it (mp3 on my computer)

    You cannot merge accounts.  Frequently asked questions about Apple ID - http://support.apple.com/kb/HE37
    One computer using multiple iTunes Store authorizations - http://support.apple.com/kb/HT1206

  • A renter used my Apple TV to access Netflix, and now I can't log him out.  Besides calling the renter to ask him to fix this, how do I fix this?

    A renter used my Apple TV to access his Netflix movies, and now I can't log him out.  Besides calling the renter to ask him to fix this using his Netflix.com account, how do I fix this?

    There is no option in Apple TV to log out of Netflix.  The internet tells me to go to netflix.com to "Disconnect from All Devices".  I can't because I'm unable to log in to a renter's Netflix account.
    Why is there no option to log out when using Apple TV?  I can't ask my next renter to reset my Apple TV each time.
    jd

  • I can't log in to ichat due to the fact that I can't connect with aim.

    i can't log in to ichat due to the fact that I can't connect with aim. everytime i try to log in it gives an ichat connection alert saying that the connection to the host was unexpectedly lost. the weird thing is that it let me sign on the first time then all of the sudden it just clicked off, giving me that message.
      Mac OS X (10.4.8)  

    I'm having the same problem.
    I know this is an Apple forum, but is there anywhere that we can get info about AOL's servers (i.e., which regions are having trouble, etc)? I'm in France, and AOL seems to shut down at about 6:00pm every day. This is very frustrating, since the people i'm trying to talk to are in the US.
    Edit: the firewall port solution doesn't work, either. It's AOL.

  • HT4759 Pc iCloud control panel. Have downloaded and can't log in. Get error message that can't sign in due to server error

    Downloaded pc iCloud control panel. Can't log in. Get error message can't sign in because of a server error. Help

    Hi,
    Are you running any Anti-virus software or do you have your firewall turned on? If so, disable them and try again. If that doesn't work, delete the iCloud account and then sign it back on again.
    Make sure you are running the most current version of the iCloud Control Panel:
    http://support.apple.com/kb/dl1455
    Cheers,
    GB

  • After updating to 10.10.3, now my Macbook Pro will not stay logged in. I log in after restarting, and it will stay logged in for 3-5 seconds then immediately log off and go back to the login screen. Any help?

    After updating to 10.10.3, now my Macbook Pro 15" (mid-2014) will not stay logged in. I log in after restarting, and it will stay logged in for 3-5 seconds then immediately log off and go back to the login screen. Any help?
    By the way, I also updated my Macbook Pro 17" (mid-2009) and it seems to be running fine, though I haven't tried to restart it and log in. I'm afraid I won't be able to get this one to work either if I do.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • I have an iphone 3g I tried to dl an app for netflix and it said i need to have ISO 5 but my phone has ISO 4.2.1 and when i try to update it I get message saying I have current version how or what can i do do to get an app the lets me watch netflix on my

    I have an iphone 3g I tried to down load  an app for netflix and it said I  need to have ISO 5 but my phone has ISO 4.2.1 and when I  try to update it on my computer through itunes  I get message saying I have current version how or what can I do do to get an app the lets me watch netflix on my  iphone 3g .Is there an sulision to my problem? I also tried another app with another name diff from netflix and I got the same message saying i need ISO 5 .Someone please help  thank you

    Thank you for your help are you aware of any apps that will work the iso 4.2.1 system that will let you watch movies on the phone. Also I tried to down load something else the other day and got message that Safari wont let you open this is ther any to see if i have the latest safari on my phone?

  • Can't open iTunes. Get this msg: "The iTunes Library file is locked, on a locked disk, or you do not have write permission for this file." HELP!

    Can't open iTunes. Get this msg: "The iTunes Library file is locked, on a locked disk, or you do not have write permission for this file." HELP!

    go to the directory where the itunes librairy is stored (google search!). Select the file hit "command+i" on your keyboard or control click on the file and select get info. there is an option to either lock or ulock the file. unlock it. restart your computer and see if it works.

  • Failed to send an environment change notification to a log shipping partner node while revalidating the login???

    Hi All,
    Recently I received the following error message in my SQL instance (Microsoft SQL Server 2012 - 11.0.5532.0 (X64)) :-
    23/02/2015 5:09:05 PM
    Error: 18456, Severity: 14, State: 51.
    Login failed for user 'webapp'. Reason: Failed to send an environment change notification to a log shipping partner node while revalidating the login. [CLIENT: 192.168.82.18]
     23/02/2015 5:09:05 PM
    Error: 18056, Severity: 20, State: 51.
    The client was unable to reuse a session with SPID 98, which had been reset for connection pooling. The failure ID is 51. This error may have been caused by an earlier operation failing. Check the error logs for failed operations immediately before this
    error message.
    I am using database mirroring instead of log shipping actually but why there's some log shipping related error message coming out? Is it some kind of bug error message?  I am just wondering and hope can get some little help about this.
    Thanks and highly appreciated.
    Best Regards,
                  Han

    Hi Harn,
    According to the error message, as my understanding, the issue could be due to that the login 'webapp' has no access to the default database which is configured in log shipping. The database is offline or removed. You could run the command (select * from
    msdb.dbo.log_shipping_primary_secondaries) to verify if that database is configured in log shipping. Another cause is that parallel execution occupies multiple worker threads. When you have many parallel executions, the number of available worker threads might
    run out and you fail to login. Please help to post complete SQL Server error log for analysis.
    To work around the issue, you could follow the two solutions below.
    1.Change the default database for the login 'webapp' according to the following article:
    https://msdn.microsoft.com/en-us/library/ms189828.aspx
    2.Reduce the 'max degree of parallelism' as the following example.
    exec sp_configure 'max degree of parallelism', 4;
    GO
    RECONFIGURE WITH OVERRIDE;
    GO
    Regards,
    Michelle Li

  • I need to back up and sync multiple iPhones to a single iMac.  Each iPhone has a separate Apple ID and the data from each iPhone needs to be backed up separately from the others.  How can I do this without getting all of the contacts, etc. mixed? Tnx

    I need to back up and sync multiple iPhones to a single iMac.  Each iPhone has a separate Apple ID and the data from each iPhone needs to be backed up separately from the others.  How can I do this without getting all of the contacts, etc. mixed? Tnx

    This might help: http://support.apple.com/kb/HT1495.

  • I upgraded to mountain lion a week ago and now on startup of my macbook pro, microsoft excel and word start up automatically and then crash? very strange can anyone please help? I have checked the login items under users and groups and there is nothing.

    I upgraded to mountain lion a week ago and now on startup of my macbook pro, microsoft excel and word start up automatically and then crash? very strange can anyone please help? I have checked the login items under users and groups and there is nothing.

    Are you using the Office for Mac 2011 version, as you need to do?  The Office for Mac 2004 is Not at all compatible with Mountain Lion, and the 2008 version has been noted to have some problems running with ML.
    Hope this helps

  • HOW WE CAN DO TRIAL AND ERROR METHOD TO FIND THE TABLES AND FIELDS?

    HOW WE CAN DO TRIAL AND ERROR METHOD TO FIND THE TABLES AND FIELDS FOR ENHANCING THE AUTOMATIC SERIAL NUMBER PROFILE///

    Hi
    You can find user-exit for that. In user exit function you can use all import parameter. Set debugging in include program and you can see all import parameter.
    Regards,
    M Sajid

  • I am getting blocks of black, vertical broken lines to right of cursor, around applications on desktop and over text on internet. I recently updated from OS X Tiger to Leopard on my G5 powermac. Can anyone advise how to get rid of the blocks of lines?

    I am getting blocks of black, vertical broken lines to right of cursor, around applications on desktop and over text on internet. I recently updated from OS X Tiger to Leopard on my G5 powermac. Can anyone advise how to get rid of the blocks of lines?

    What graphics card is installed?
    Have you looked inside to see if the interior is dusty?
    Is the graphics card dusty?
    If equipped, is the fan on the graphics card turning?
    Leopard uses the graphics card harder than Tiger, so weakness in the graphics card is more easily shown.

  • TS1440 Mac on start-up becomes a white screen with a blinking file folder with question mark. Can't log in or get on computer.

    Please help, other forum from 2011 didn't help. Can't get info because I can't log in.

    See this Apple note, which applies to OS X 10.7 Lion as well. This Apple note applies to OS X 10.6 and earlier but provides a little more information. When they talk about booting from CD, that's a boot with command and r keys held down in OS X 10.7 Lion.

Maybe you are looking for