On a new setup I get error message "'could not activate this table (3001)''

Hi,
I am busy setting up my new playbook and get an error message on the software update screen: "'could not activate this table (3001)'' please try changing your settings.
What settings am I meant to change?
There is a button for settings and when I press this, the playbook takes me back to the connect to WI-FI screen. The WI-FI screen shows that I am currently connected. When I click on hotspot setup, the screen comes back and says I am already connected to the internet.
Can anybody please assist me to complete my setup so that I can start using the playbook?
Looking forward to your feedback
Thanks a stax

Or, you can find a local UNsecured hotspot not requiring a login or password. Like a McDonalds.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • HT4993 getting error message could not activate cellular data network when trying to access the internet without using wifi.  what do i need to do?  i have already restore the phone.

    getting error message could not activate cellular data network when trying to access the internet without using wifi.  what do i need to do?  i have already restore the phone.

    contact your phone carrier as they handle cellular network.

  • HT201328 after unlocking from ATT and resetting iphone 3gs I keep getting the same error message "could not activate phone" neither Apple Store Tech or ATT were able to fix this . Any ideas?? TKS Sandro

    after unlocking over the phone from ATT and resetting iphone 3gs I keep getting the same error message "could not activate phone" neither Apple Store Tech or ATT were able to fix this .
    Itunes displays a message saying "there is no SIM installed in the phone you're trying to activate" even if there is the same SIM that was working minutes before.
    The SIM works on a different phone I tested it.
    Any ideas?? TKS Sandro

    “Could Not Activate EDGE” error message Update ...
    Well it’s going on day 6 and still sporadic to no EDGE on my iPhone. At one time, it was thought to be a defective iPhone – since my partner’s iPhone works just fine.
    After over three hours on the land line with AT&T and Apple, I was sent to the local Apple store for a replacement. Of course, as soon as I walked into the Apple store my iPhone worked just fine. ;-( The local store replaced my iPhone and suggested I go home and activate the phone as a NEW iPhone, that way if there was a bug in my data it would not carry over to the new phone. Did that and well… still sporadic to no EDGE. By the way, I have the Big White “E” to the right of the 5 bars and AT&T .
    AT&T said last week they has “Software” issues in my area, but the CSR I talked to did not know what the issues were or if they were the cause of my problems. He did say they would call me back today to see how my iPhone was doing, but alas, no call back.
    When I’m next to my partner, trying to access the same feature, his iPhone is just so fast. Mine hangs up, draws out and finally I get the error message, “Could Not Activate EDGE”. I am updated to version “1.1.4(4A102)”. New (refurbished) iPhone direct from Apple.
    I remember reading a while back about some problems others had when they upgraded to from 1.1.3 to 1.1.4. I never had those problems, but it sure looks like they may have started. Does anyone remember what the problems with 1.1.4 were, what was done if anything to correct them, and best of all any suggestions?
    By the way, this is Seattle, not some small – out of the way place where connection and signal strength is expected to be second rate. Also, I had full function of my iPhone from the day I bought it in June 2007, all the way up to Thursday March 20, at 2120.
    Thanks
    Joe

  • When I try to save a photo, I get error message Could not complete your request because of a program error.  What's wrong?

    I edit a photo and when I click Save As, I get error message "Could not complete your request because of a program error."    I exit Elements, try again, same error. 
    In past I had this problem but it resolved when rebooted PC.  This time, PC reboot does not help.
    I cannot save anything i do in elements!!
    What's wrong?  Any suggestions how to fix this?   Anyone know what the program error is

    Please mention your PSE version and underlying OS.
    Also, it would be of great help in resolving the issue if you can upload a snapshot of error message.
    Regards
    Kishan

  • HT4623 My new iPad can no longer connect to the 3G network. I keep getting the message "could not activate cellular date network".

    I updated my new iPad to the iOS 6 while connected to wifi. However, it will no longer connect to the 3G network. I keep getting the message "could not activate cellular data network" even though the 3G symbol appears normal. I have tried rebooting, but it still doesn't work. Please help!

    No. You can't

  • I'm trying to load video file into CS6 I keep getting error message: 'Could not complete you request because the DynamicLink Media Server is not available.' No Idea what to do next. Help please.

    I'm using CS6 Extended. My OS is "Windows 7 home premium.
    Can no longer load video files into CS6 for edited I keep getting error message:
    'Could not complete your request because the DynamicLink Media Server is not available.'
    Don't know what this means. Until just now I was able to load videos without any problems. Now I'm getting this message. Any thoughts?

    Hi Mylenium,
    upfront:
    I hope I won't be marked as spam now, since I am posting on a few relevant discussions now to this topic.
    However, I really would like to ask the people who have experienced this problem to see if they were able to solve it.
    Now the real deal:
    I posted a question in this discussionDynamicLink Media Server won't let me import video for video frames to layers anymore.
    The linked discussion is a lot younger, which is why I posted there first.
    I also put in information on the steps that I have tried and my computer specifications.
    I am experiencing this problem for a while now and hope you and jones1351may be able to help out.

  • On mac yosemite, when trying to install my own brushes, I get error message: "Could not load the brushes "blahblah.abr" because the file is not compatible with this version of PS" (PS CC 2014)

    Need help-
    On my mac with yosemite, when trying to install my own brushes, I get error message: "Could not load the brushes "blahblah.abr" because the file is not compatible with this version of PS" (PS CC 2014) ????

    Thank you station_two but I did install them in my
    applications>adobe>presets>brushes and still I get this error message......
    On Tue, Dec 2, 2014 at 6:20 PM, station_two <[email protected]>

  • Get error message could not create library/application support

    get error message "could not create library/application support" when trying to install Creative Cloud.

    Check your user permissions on the Library folder.
    Mylenium

  • How to solve the error message "Could not activate cellular data network: PDP authentication failure"when using 3g or gPRS on safari with an iphone 4 and latest software updates

    Please can someone help me to solve the error message "Could not activate cellular data network: PDP authentication failure"when using 3G or GPRS on safari with an iphone 4GS and latest software updates. I have tried resetting the network and phone settings. I have restored the factory settings on itunes and still the problem persists.

    All iPhones sold in Japan are sold carrier locked and cannot be officially unlocked by the carrier. If you unlocked it, it was by unauthorized means (hacked), and support cannot be given to you in this forum.
    Hacked iPhones are subject to countermeasures by Apple, particularly when updating the firmware. It is likely permanently re-locked or permanently disabled.
    Message was edited by: modular747

  • Since upgrading my iPhone 5 to ios 7, I cannot get the internet, email to work on 3g.  I get the message ""could not activate mobile data network. You are not subscribed to a mobile data service".  How do I fix it?

    Since upgrading my iPhone 5 to ios 7, I cannot get the internet, email to work on 3g.  I get the message ""could not activate mobile data network. You are not subscribed to a mobile data service".  How do I fix it?
    I've contacted o2, tried all of their suggested updates and changes, reset my phone 3 times and still no luck.
    Any help appreciated.
    Thanks,
    Louisa

    Hi, l have the same problem, were you able to resolve?

  • My iPad2 has error message "Could not activate cellular data network : PDP authentication failure"

    My iPad2 has error message "Could not activate cellular data network : PDP authentication failure"

    All iPhones sold in Japan are sold carrier locked and cannot be officially unlocked by the carrier. If you unlocked it, it was by unauthorized means (hacked), and support cannot be given to you in this forum.
    Hacked iPhones are subject to countermeasures by Apple, particularly when updating the firmware. It is likely permanently re-locked or permanently disabled.
    Message was edited by: modular747

  • Getting error message "Could not create work area" when I open Bridge CC.

    I am getting an error message "Could not create work area" when I open Bridge CC.
    I have reset my workspace. I have closed and opened Bridge CC. I have deleted the !!-$$$AdobeOutputModule.workspace file in /Library/Application Support/Adobe/Bridge CC/Workspaces folder.
    I am not an expert computer user, so please explain in detailed steps like I am 5 years old. Thanks in advance for any help.

    I am experiencing the same problem!
    My mac is OS X Yosemite (10.10.1), Photoshop CC 2014.2.1, Bridge CC 6.1.0.115 and Camera Raw 8.7.0.309

  • Having just upgraded to Ios6 I can not log into my carrier. I get the message "Could not activate cellular data network. You are not subscribed to a cellular data network." What can I do to rectify this?

    Having just upgraded my iPad to IOS 6 I can no longer log onto my 3G Carrier. I get thi message "Could not activate cellular data network. You are not subscribed to a cellular data service" what can I do to rectify this?

    I reset APN settings from my carrier service site and rebooted but it didn't fix the problem.

  • I have cc2014 and I want to bridge to DAZ Studio .duf file.  In PS I choose File Automate DAZ Studio 3d bridge - get error message "could not complete DAZ Studio 3D Bridge command because of program error".  What's going on.

    I get error message when trying to open DAZ Studio 3D bridge in PS 2014 from the File and Automate Menu.
    Error reads "could not complete DAZ Studio 3D Bridge command because of program error?"
    According to User Documentation  I should get a dialog box which allows me to click on "Launch DAZ Studio"
    Why is there a problem?

    You have something messed in with your Photoshop or OS install.  You need to troubleshoot that first.
    BOILERPLATE TEXT:
    If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, such as total installed RAM, scratch file HDs, video card specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
    A screen shot could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • HT201274 I am not able to restore my iphone 3G, After about 70% of the restore i am getting error message could not restore the device

    Dear friends,
    My iphone 3G is not working when I power on the phone I am getting a USB symbol and at top shows itunes. I tried with itunes to restore the and update the software,but about after 70% of the3 reestore amd getting error message couldnot restore the device, due to some error. Is there any solution for this problem. Please help me to solve this problem.
    Thanks,
    Chirackal

    Make sure you switch off anti-virus and firewall, then try again.

Maybe you are looking for

  • Tecra M2 - black screen with the cursor flashing

    Hi guys, Im hoping someone out there may be able to help me fix my laptop. Ive read a couple of posts but not sure they can help me. When I swicth on my Tecra M2, I just end up with a black screen with the cursor flashing in the top left or I get a s

  • I Need Information about  Open Source Java Client/Server Instant Messaging

    I need your valuable help and collaboration with the following issue: I need to know where can find a robust Open Source Java Instant Messaging Client/Server Application. I thank in advance for their valuable time. And for the attention and the colla

  • Cost and Profit Center

    Hi all; What do you  mean by Standard Cost center and standard Profit Center ? Thanks in advance Krish...

  • Can we install Oracle Virtual Machine in OEL-5?

    Hi Forum Mates Can i install Oracle Vm in OEL-5 and install OEL-5 in VM too? I want practice database concepts like networking,dblinks,cloning etc? can i install windows 7 in vm and practice migration of database from windows to linux. my desktop is

  • The sound is not recorded with video, Why?

    I recently recorded a video for the first time and found no sound does anyone know what I have missed out on I have notused it since upgrading to OS7