On AMD A10-7850K some randome lines appearing on the section of tabs.
On AMD A10-7850K + Win7 64bit, some randome lines appearing on the section of tabs. (Looks like a graphical bug)
Reinstall, new driver... still randomly happened.
HW accelaration is now set to off and it looks okay now.
Kedves Tomi55!
Rendicsek! Hozzá vagyok szokva az angol-nyelvű helpdesk-hez.
Én is dolgozom, de még így is elég gyors a reakcióidő, köszönöm.
Szóval... Ha kikapcsolom a HW-es gyorsítást, akkor a probléma megszűnik. Nincs gond a memóriával, nincs gond az APU-val sem. Minden szépen fut rajta, egyedül a böngészőben jelennek meg néha random vonalkák a fölső sorban, ahol a tabok vannak.
Most per pillanat ki van kapcsolva a HW-es gyorsítás a böngészőben és nincs grafikai hiba. Ha bekapcsolom, majd újraindítom a böngészőt, akkor a hiba azonnal előjön.
Similar Messages
-
My iPod 5 (32gig) has recently started to do this thing where it will show random lines on the screen when either typing quickly or watching certain videos. They are close to the thickness of your fingernails and occasionally vary in color. I've had this iPod for around a year and a half now and it hasn't suffered any significant trauma. When it happens on the keyboard, the lines only appear on the keyboard. When it happens during a video it only happens where the video is playing (ie. if not on full screen, it only happens on the rectangle where the video is, not the empty space). And it also only happens on certain videos. It happened earlier on a news segment clip on the Fox website, but not on a music video I watched on YouTube three minutes later. For videos, it can be up to three of these lines at once. It first started happening to my keyboard and has since furthered itself to the videos. The screen has two small scratches but other than that it's fine. I'd also like to add even though it may not be relevant that my apps have been crashing more recently as well.
What do you recommend I do? Why is this happening? Thank you in advance!Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
[Solved] radeonsi: only Software Rendering with AMD A10-7850k APU
Hi,
I have a new computer with an AMD A10-7850k APU.
I installed Arch Linux as usual and now get only Software Rendering with the open source drivers.
$ glxinfo | grep vendor
server glx vendor string: SGI
client glx vendor string: Mesa Project and SGI
OpenGL vendor string: X.Org
Xorg.0.log
http://pastebin.com/Pi1rCW5n
dmesg | grep drm
http://pastebin.com/qx7Re1fv
I am in the video group and I have no nomodeset in my boot entry.
Is this APU not yet supported for Hardware Rendering with the radeonsi drivers or do I miss anything?
Thanks in advance for any help!
Last edited by jollafan (2014-09-26 12:53:20)glxinfo | grep vendor says very little about software / hardware rendering.
try grepping for renderer or OpenGL
$ glxinfo | grep vendor
server glx vendor string: SGI
client glx vendor string: Mesa Project and SGI
OpenGL vendor string: X.Org
$
$ glxinfo | grep renderer
GLX_MESA_multithread_makecurrent, GLX_MESA_query_renderer,
GLX_MESA_multithread_makecurrent, GLX_MESA_query_renderer,
OpenGL renderer string: Gallium 0.4 on AMD RV770
$
$ glxinfo | grep OpenGL
OpenGL vendor string: X.Org
OpenGL renderer string: Gallium 0.4 on AMD RV770
OpenGL core profile version string: 3.3 (Core Profile) Mesa 10.4.0-devel (git-23247e8)
OpenGL core profile shading language version string: 3.30
OpenGL core profile context flags: (none)
OpenGL core profile profile mask: core profile
OpenGL core profile extensions:
OpenGL version string: 3.0 Mesa 10.4.0-devel (git-23247e8)
OpenGL shading language version string: 1.30
OpenGL context flags: (none)
OpenGL extensions:
OpenGL ES profile version string: OpenGL ES 3.0 Mesa 10.4.0-devel (git-23247e8)
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.0
OpenGL ES profile extensions:
$ -
the site was published and everything looked great, except we had to make several changes to the content and somehow along the way a line appeared on the master page (hence appearing on all pages). i can't figure out how to get rid of it, and it's driving me nuts. any advice would be much appreciated.
thank you in advance for you help!Hello,
Are you talking about the Shadow effect on the page : http://trainingwebcom.worldsecuresystems.com/SachinFTP/2013-12-05_1415.png
Or is it about the line on the homepage : http://trainingwebcom.worldsecuresystems.com/SachinFTP/2013-12-05_1416.png
In case it is about the shadow, please go to Master page, click on some blank area and check in the toolbar at the top if there is some effect applied to page : http://trainingwebcom.worldsecuresystems.com/SachinFTP/2013-12-05_1417.png
It can be Shadow, Bevel or Glow effect applied. You can uncheck it and it should be good.
Let us know if it helps or not.
Regards,
Sachin -
Adding some more line items in the unconfirmed Transfer Order
Hi All,
We do kitting activity at our warehouse i.e. several components make up an assembly of a particular final product. The WH creates a production order(BOM) based on which the system creates TO wherever stock of individual components are available for picking. However, the remaining components which are required to make up the product are still awaited in such a case (stock unavailable at present). Under this situation, is it possible that the balance remaining components can be added to the same original TO created earlier (i.e. where only available line items of that TO is confirmed and the TO header is still open).
Alternatively, can we add some more line items in the same unconfirmed Transfer Order to facilitate this kitting process and thereby confirming the TO header finally.
A quick feedback will be appreciated. Thanks.
Regards
JamanHi,
If you know what all the items you will include in one TO, even though you haven't pick the items;
In the TO, you have an option to make the items "Inactive" for which picking hasn't been done.
After making the items "Inactive", if you save the TO, it will allow you to confirm the TO, but then, it will create the new TO with the inactive items.
Hope its clear.
Aktar -
Max no of lines appear in the back ground job out put
Dear All,
Please help me to solve following query,
I am execution ME2N report in background. There are more then 100000 line item in the out put. However only 5000 line appear in the output of background job.
Is there any setting in sap, where i can change the max no of out put is more then 100000 in back ground job?
Your earlier answer should be highly appreciated?
Regds,
sp sahuClick on the settings button and choose the 'The last' radio button for dispaly area and put in 10 pages.
Sometimes just clicking on the Last page button on the Tool bar will do the trick -
The vendor code is not coming against some Assignment line items with the
Hi All,
While executing t.code FBL3N,the vendor code is not coming against some Assignment line items with the GL A/C4607000, some line items it is coming.
The GL A/c 4607000 is GR/IR clearing a/c.
Please let us know why this situation is happeing at the time of FBL3N.
Thanks
RamHI,
By activating the special fields you can the vendor number, but use the new reprot called "FAGLL03 - Display/Change Items (New) ".
First go to SPRO> Financial Accounting (New)> General Ledger Accounting (New)--> Master Data > G/L Accounts>Line Items --> Define Special Fields for Line Item Display
Click on New Entries -
Table - BSEG - Field - LIFNR
Save. Now execute the report - FAGLL03 - Display/Change Items (New)
Give the gl account number and execute.
After getting the line items list from menu select --Settings --> Special Fields --> Click on New Entries --> Enter Table BSEG, Field Name LIFNR.
After this come back and execute again. It will give you the vendor number.
Thanks & Regards,
Shashi Kanth. -
Satellite M65-S9063 - Vertical white lines appearing down the screen!
Hi all - any ideas...
Model M65-S9063 Approximately 3 weeks ago a vertical white line appeared down the screen, it's around a mil thick.
Then yesterday a second one has appeared, slightly thinner this time. They're always there even after a reboot! It doesn't look as though any video is being displayed as they're always white. I was wondering graphics card perhaps? Or maybe the LCD itself?
Anyone seen this before??
Many thanks,Hi!
You can simply determine the reason of this issue. Connect an external monitor the notebook and see what happens.
If you can notice the same error on the external screen, its a problem of the graphic card or display driver. If you dont have this issue on the external screen, you should go to an authorized service provider for exchanging the internal screen.
If you use a non Toshiba display driver you should remove it and test it with original Toshiba drivers.
I hope I could help you a little bit.
Bye -
When I hover over or click a button on the tool bar it becomes messed up. Blocks, or more like pixels, appear over the buttons. They are white and they move around. Little black lines appear around the buttons too. I tried uninstalling and re-downloading Firefox, a full reset, etc. Nothing has worked so far. To see pictures of the problem use this URL (it brings you to Imgur): http://imgur.com/a/LXHQg
hello, try updating your graphics driver - this should be the right link for your system: http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=22375
-
About Final Cut ProX: why a red line appears at the top o a file imported into a New Event? then when I restarted the Project that files comes as "Missed files" How can i fix it? Thank you very much.
Where are you importing from – a camera or computer? If you are optimizing at import, make sure the background processes are completed. (Command-9)
Russ -
Created path and used trim but the line appears from the wrong side?
Hey,
I've created a rectangle by using the pen tool, then applied a stroke to it. I've then added "trim paths" and the end value at 0seconds is 0% and then at 5 seconds its at 100% however the line appears from the wrong side of the screen, basically it's reversed, yet the reverse path symbol is not ticked.
The line is meant to appear from left to right of the screen with a 2px stroke, which will then have a mask applied to show a large black box appear from this line and fill the rest of the screen up.
Anyone able to help me at all?
Thank you.If you animated the start then animate the end. Simple as that.
-
Why do black lines appear across the message part of emails when I first open Thunderbird
Black lines appear across the message part of emails when I first open Thunderbird. This has been happening the last couple of days and is very annoying. It used to happen on Mozilla when I would go on the internet. It has stopped.
HELP!!! NOW!!!Screen shot please?
https://support.mozilla.org/en-US/kb/how-do-i-create-screenshot-my-problem
Which version of Thunderbird? Which OS? -
I have vertical colored lines appearing on the Mini Ipad screen
I have vertical colored lines appearing on the Mini Ipad screen
I had the same problem with my first gen ipad mini. The solution was not to do a hard reset, but instead to push the sleep/off button until the red slider appeared, then slide to OFF. Wait a few seconds then push the sleep/home button until the Apple logo appeared. The lines were gone. I called Apple Support and they wanted $19 to troubleshoot over the phone and $99-$199 to bring to the nearest Apple store. This may not be a permanent fix, but it resolved the issue. I purchased my ipad mini from a local electronics store in May of this year. Believing it to be new and still under warranty I called the AppleCare store and discovered that it had "previously" been purchased in November a year ago and was no longer in warranty. As stated, I've had the device since May and it has worked wonderfully until today when I turned it on and it had colored vertical lines displayed on the screen. The lines would change color at times and even became a solid black stripe. The strange thing was that when taking a screen shot the lines were not noticeable and didn't show up on the picture. The Customer Care support tech told me to search other display issues. On one of the support threads it had something to do with videos/video apps and that is where I saw to do the SLIDER OFF. It worked even when the hard RESET had not.
-
Processor 3.06 GHz Intel Core i3
Memory 12 GB 1333 MHz DDR3
Software Mac OS X Lion 10.7.5 (11G63)
iMac 21" display
My 21" display on iMac (mid 2010) is overheating so much I can't sit at my computer for more than an hour or so. Very hot. Also, some shadowy shapes appear in the background on the upper left of the screen. Any thoughts?Thanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
Thanks again! -
When i unplugg my ipod lines appear across the screen and wont turn on how come?
when i unplugg my ipod lines appear across the screen and wont turn on how come?
Is it working properly when it is connected to power?
when i unplugg my ipod lines appear across the screen and wont turn on
Please clarify... Does the screen look "normal" (and is it turned "on") when connected? When you disconnect it, "lines appear across the screen"? If it "wont turn on," how are there lines (or anything) appearing on the screen?
Maybe you are looking for
-
I am using Ethernet cable to connect Apple TV. I have connected to Cable TV box as directed by cable provider. I have connected the HDMI cable from TV back to the Apple TV box. Power cord is connected. What am I doing wrong? Remote and Apple TV are n
-
Why Isn't OpenX Working On My Flex Website When Using a PC?
Hi, I'm using OpenX to serve ads. It serves ads when I use my Mac with Safari or Firefox. But, it doesn't work when I checked my site on two PCs both running Windows XP with IE and Firefox. I'm getting error #1090, which is "XML parser Failure: eleme
-
"Preserve photoshop editing capabilities" is incompatitable [error message?]
I've got a frustrating problem that is screwing up my photoshop files. The problem starts when I try to save my file (it has numerous layers) as a pdf. When I save my file as a pdf I get a pop up message saying "Preserve photoshop editing capabilitie
-
How do I recover/restore; iOS5 ate my stuff!!!
My apps, photos, music are missing after iOS5 Upgrade/Restore. Where are they and how do I restore all of my apps, photos and music? The only apps that were listed in iTunes was iWorks, but none of my other apps were listed. Not to mention all of the
-
Why can't I remove the Genius button from my iPod Touch?
I decided to remove Genius functionality from my iPod, so I shut it off in iTunes. However, the button still remains on the now playing screen, and Genius playlist is still listed under my Playlists. If I attempt to make a Genius playlist for any s