On an pci_mio 16e4 programming using nidaq & visual basic, after using AI_Setup analog sequential data accusition stops.To restart I use Init_DA_Brds This takes a long time, What must I reset to restore the analog sequential function?

on an pci_mio 16e4 programming using nidaq & visual basic, after using AI_Setup analog sequential data accusition stops.To restart I use Init_DA_Brds This takes a long time, What must I reset to restore the analog sequential function?
I belive that the trigger is being changed on the io board, but cannot manage to reset it.
The reset process takes in the order of 0.1 sec, and since this is a time critical application, i want to get the scanning function working again faster

Dear Ian. Thank you for your reply. The problem appears to be that the scan trigger(s) are stopped, or something, by the use of the AI_setup instruction. The sytstem works perfectly until this instruction is used. My problem is in understanding what has happened since the help seems to give no detail on any interconnection between the scan system and the external analog trigger system. I have tried to reconnect the triggers, but so far unsucessfuly

Similar Messages

  • Firefox takes a long time to start, unless I disconnect from the internet first, in which case it starts instantly.

    Whenever I start firefox, it takes an inordinately long time (usually close to a minute, sometimes longer) to start up. i.e. no window, no nothing. In task manager, it shows no activity for cpu, disk, or network activity - it's as if it's waiting for a connection to be made or something.
    If I disable my internet access first, then start firefox, it starts up instantly, and once the internet re-enabled, it works normally.
    Whatever it is doing at initial startup is taking a very long time - couldn't it be done in a separate thread, and let normal startup continue?

    Press the '''<Alt>''' or '''<F10>''' key to bring up the tool bar.
    Followed by;
    Windows; '''Tools > Options'''
    Linux; '''Edit > Preferences'''
    Mac; ''application name'' '''> Preferences'''
    Then '''General.'''
    There are two settings;
    * '''When Firefox Starts'''
    When the browser is started, what page do you want to
    display. Many of us choose '''Show My Home Page.'''
    * '''Home Page'''
    When a new page is opened, what do you want displayed.
    # '''Use Current Page'''. Use what ever page(s) are open at that time.
    # '''Use Bookmark'''
    # '''Restore To Default.''' about:home shows a Mozilla page with tools.
    You can use any of these that you wish;
    '''about:home''' (Firefox default home page),
    '''about:newtab''' (shows the sites most visited),
    '''about:blank''' (a blank page),
    or you can enter any '''web page''' or '''about: ''page''''' you want.

  • I cannot receive email properly now. When I open mail, it says that is downloading about 1,700 emails. At the very end, it gives me my newest ones. But this takes a long time. I've contacted the Internet service provider and verified all the right setting

    I cannot receive email properly on either my IPad or my IPhone. I have had them for over a year and they have always worked fine. Until three days ago, when they both started acting up. On the IPad, when I open mail, it says it is downloading about 1,700 emails. At the very end, which takes quite a while to get to, I finally get the most recent ones. The IPad is sending emails just fine.
    On my IPhone, when I open mail, it says it is downloading 100 emails, but it doesn't do that. And it gives me no new emails at all. The IPhone is sending email just fine.
    I have already deleted the email accounts on both devices and reinstalled them. I've contacted the Internet service provider and verified all the right settings. The Outlook email on my desktop is working perfectly.

    WMV is a heavily-compressed format/CODEC, and the processing time will depend on several factors:
    Your CPU, which is not that powerful in your case
    Your I/O sub-system, which is likely a single HDD on your laptop
    The source footage. What is your source footage?
    Any Effects added to that footage. Do you have any Effects?
    Each of those will have an impact on the time required.
    The trial has only one main limitation - the watermark. Now, there are some components, that have to be activated, but are not with the trial, but they would be evident with Import of your source footage, if it's an issue.
    Good luck,
    Hunt

  • The website takes a long time to lod and it does not display correctly the layout is expanded.

    When i try to load the website it takes a long time to load and when it does the layout is expanded and no images appear. The site has the same problems with IE and chrome. I did recently use Reginout.

    Can you attach a screenshot?
    *http://en.wikipedia.org/wiki/Screenshot
    *https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
    Use a compressed image type like PNG or JPG to save the screenshot.
    Did you check the Accessibility settings in Windows?
    *http://windows.microsoft.com/en-US/Windows7/Make-the-computer-easier-to-see-optimize-visual-display
    *http://windows.microsoft.com/en-US/windows7/Getting-the-best-display-on-your-monitor

  • I cannot open a .pdf in an incoming mail (Outlook 2010) with Acrobat Pro XI.  It will only allow "preview".  I have to  copy and paste the .pdf to my desktop and then open it.  What do I do to restore the 2x click in Outlook to open the .pdf?  thank you

    I cannot open a .pdf in an incoming mail (Outlook 2010) with Acrobat Pro XI.  It will only allow "preview".  I have to  copy and paste the .pdf to my desktop and then open it.  What do I do to restore the 2x click in Outlook to open the .pdf?  As of now, I get the following bracket opening on screen when I click on the Acrobat icon for attachment within the email:  Thank you
    Adobe Acrobat has stopped working
    Windows can check online for a solution to the problem.
    -Check online for a solution and close the program
    -Close the program
    Problem signature:
      Problem Event Name:                        APPCRASH
      Application Name:                             Acrobat.exe
      Application Version:                           11.0.7.79
      Application Timestamp:                     536b812b
      Fault Module Name:                          Acrobat.dll
      Fault Module Version:                        11.0.7.79
      Fault Module Timestamp:                  536b80ff
      Exception Code:                                  c0000005
      Exception Offset:                                00cbf281
      OS Version:                                          6.1.7601.2.1.0.256.48
      Locale ID:                                             1033
      Additional Information 1:                  0a9e
      Additional Information 2:                  0a9e372d3b4ad19135b953a78882e789
      Additional Information 3:                  0a9e
      Additional Information 4:                  0a9e372d3b4ad19135b953a78882e789
    Read our privacy statement online:
      http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
    If the online privacy statement is not available, please read our privacy statement offline:
      C:\Windows\system32\en-US\erofflps.txt

    Hi Gary,
    I have seen this issue occur with users who have this registry setting missing or have improper permissions.
    When you double click the attachment to launch the pdf it is saved and opened from the temporary folder unless saved specifically to a location.
    If you dont have the below mentioned registry key or improper permissions then attachments fail to open.
    Please  heck if the following reg key exists:
    HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook\Security
    or
    HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\14.0\Outlook\Security
    Value Name: OutlookSecureTempFolder
    If the value exists, and if the value contains a valid path, Outlook 2010 uses that location for its temporary files.
    If the registry value does not exist, or if the value points to an invalid location, Outlook 2010, Outlook 2007, or Outlook 2003 creates a new subdirectory under the Temporary Internet Files directory and then puts the temporary file in the new subdirectory. The name of the new subdirectory is unknown and is randomly generated, depending on your version of Outlook.
    Please check the following key:
    HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook\Security
    Note the location for: OutlookSecureTempFolder key
    Check if the same folder exists in the following location and if not create a corresponding folder in the location on C:\Users\<User account name>\Appdata\Local\Software\Microsoft\Windows\......
    Regards,
    Rave

  • I just rented a film using my apple TV and was then asked to enter a code - which I haven't been asked for in long time. I have forgotten the code. Any quick solutions to the problem?

    I just rented a film using my apple TV and was then asked to enter a code - which I haven't been asked for in long time. I have forgotten the code. Any quick solutions to the problem?

    Hello anetsa
    It sounds like you have restrictions setup on your Apple TV. If you do not know your passcode to unlock it, then you will need to restore your Apple TV. Check out the articles below for more information about Restrictions as well as restoring your Apple TV.
    Apple TV: Understanding Restrictions (parental controls)
    http://support.apple.com/kb/HT200198
    Apple TV (2nd and 3rd generation): Restoring your Apple TV
    http://support.apple.com/kb/HT4367
    Regards,
    -Norm G.

  • Hi out there. To capture a screen shot one uses: Command-Shift-3 or 4. I have done this for a long time. Now suddenly neither screen shot works anymore. Suggestions how to get this useful function back? Thanks, Georgx

    Hi out there. To capture a screen shot one uses: Command-Shift-3 or 4. I have done this for a long time. Now suddenly neither screen shot command works anymore. Suggestions how to get this useful function back? Thanks, Georgx

    Command-Shift-3 and 4 works just fine on several Macs that I have here.
    Try restarting your Mac....or post in the specific support area for your Mac model....for more advice.
    https://discussions.apple.com/index.jspa

  • My ipod 5th gen crashed unexpectedly while i was using my facebook app and then i turned it off thinking it would restart and be alright but when i turned it on like ***?! some of the applications were gone and the setting and appstore and photos are gone

    my ipod 5th gen crashed unexpectedly while i was using my facebook app and then i turned it off thinking it would restart and be alright but when i turned it on like ***?! some of the applications were gone and the setting and appstore and photos and camera are gone like everything that is on it already .. please help me

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                                     
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                      

  • I have made a website using iweb, as this will no longer be supported by apple, does that mean the gallery I have created on my website will no longer work even though I am hosting it with a different hosting provider

    I have made a website using iweb, as this will no longer be supported by apple, does that mean the gallery I have created on my website will no longer work even though I am hosting it with a different hosting provider. Will the other widgets no longer work?

    There are a few things that won't work on other hosting sites; hit counters and pop-up slide shows for sure.
    See http://oldtoadstutorials.net/No.iW11.html for more info, and/or the iWeb forum at https://discussions.apple.com/community/ilife/iweb

  • TS1702 Hi, I getting a "playback error message" on youtube App. I tried to reinstall the app and to reset and restore the device and all these things didn't help.can you please help me

    Hi, I getting a "playback error message" on youtube App. I tried to reinstall the app and to reset and restore the device and all these things didn't help.can you please help me

    That's a peculiar one to get in the context of a QuickTime uninstall.
    Which particular version of QuickTime for Windows are you currently running? (7.7.5, 7.7.4, something earlier?)

  • My os x mavericks got crashed accidentely while installing the windows 8 and I am trying to reinstall using recovery console, but its take very long time and forcing me to download OS X 8 from internet, is there any where can I get offline download of OS.

    My os x mavericks got crashed accidentely while installing the windows 8 and I am trying to reinstall using recovery console, but its take very long time and forcing me to download OS X mountain lion from internet, is there any where can I get offline download of OS file where I can install directely OS X Mavericks.

    Hi, original poster here. I did not realize this would generate more discussion so I never checked back. I still had my warranty, so I took it to the store and got it repaired. The original problem I had was a screen with this icon flashing when I attempted to boot it up:
    When I took it to the store, they told me that my computer was unable to communicate with the hard drive. I had this same problem three times in two months where this screen reappeared. Each time I went back to the store and they said the cause was different, but they were all hardware issues that physically made it impossible to communicate with the hard drive. After the third time, they simply replaced my laptop and I haven't had the same problem.
    So in short: The reason you can't reinstall or move anything when you encounter this screen appears to be because nothing can communicate with the hard drive in the first place. You can't reach the disk or anything on it. So I don't believe it's possible to do anything besides take it to a physical store and have it fixed.

  • Since installing Lion, I am unable to add to iPhoto from an e mail or desk top. Something about power pc.  I thought I had a Mac! What should I do to restore the facility?

    since installing Lion, I am unable to add to iPhoto from an e mail or desk top. Something about power pc.  I thought I had a Mac! What should I do to restore the facility?

    As a Test:
    Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?

  • My iphone 5s (7.1) has permanently the search icon, as if searching network. This affects the speed of email and consumes a lot of battery. This happens even with all applications closed. I have restored the iPhone but the problem persists. Do you have an

    My iphone 5s (7.1) has permanently the search icon, as if searching network. This affects the speed of email and consumes a lot of battery. This happens even with all applications closed. I have restored the iPhone but the problem persists. Does anyone  have an idea of the solution?
    Thanks!!

    Try to reboot the iPhone, if that doesn't help make a backup via iTunes, and restore the iPhone via iTunes.
    Otherwise disable background refresh, and kill all apps

  • I just updatet my Iphone 4S to IOS6 and the where a error, and now itunes telling me I need to recover my Iphone to use my Iphone and to recover I will lose all my media files and other files! this is an disaster! What can I do? MY IPHONE DON'T EVEN WORK!

    I just updatet my Iphone 4S to IOS6 and the where a error, and now itunes telling me I need to recover my Iphone to use my Iphone and to recover I will lose all my media files and other files! this is an disaster! What can I do?
    EVEN MY IPHONE DON'T WORK ANYMORE !! NOO!!

    I exactly have the problem. Tried to get help from AT&T and Apple. Still no solution...

  • I recently bought an iPod Touch from the US, when I was living there. I am now in India, and my iPod seems to be frozen -- the slider won't slide. So far, I've updated my iTunes and reset and restored the Touch. Problem: no Genius bar in India. Theories?

    I recently bought an iPod Touch from the US, when I was living there. I am now in India, and my iPod seems to be frozen -- the slider won't slide. So far, I've updated my iTunes and reset and restored the Touch. The problem with the simple solution: there's no Genius bar in India.
    Any idea what I can do?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer          
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

Maybe you are looking for