ON BEHALF USER PLANT AND SLOC?

HI,
We have on behalf functionality implmented for cross companies.
But while doing shopping, in shopping cart onbehalf user plant and sloc is not populating in plant and sloc.
F4 list is not coming in shopping cart.
Can anyone please help how to get that F4 list.
For example : X user is from US and Y user is from France.
Now X user is doing shop on behalf for Y user. Now in shopping cart France plant and sloc should come in F4 list.
But nothing is coming as of now.
Please let me know how to proceed on this.
Regards
Venkatesh P

Hello Venkatesh,
If a user A makes a shop on behalf user B, you have to assign to user A (in 'Extended Attributes' tab) plants and storage locations assigned to user B.
Check also correct value for company code attribute 'BUK' is assigned in 'Attributes' tab for user A, according to plants from user B.
Regards.
Laurent.

Similar Messages

Determine Plant and Sloc for Purchase Order Creation

Hi Gurus,
I want to determine while create a Purchase Order (ME21N), I can restrict the Purchase Order only for specific Order Type , specific Plant and specific Storage Location.
The business needs is to prevent human error while create Purchase Order with wrong Order Type, Plant and SLoc combination.
Is there any Exit related ?
Thx in advance.
Tri W

Hi ,
This is MM question
In MM , you could use authorzation in PFCG to limit the plant selection and document typefor a specific user .
This would also have effection to the ME21N .
For the storage location ,then please to set the field as display only and then add a default value to the user in
the personal setting.
I hope this will help you a little bit apart from the BADI.
Regards
Summer Wang

How will the plant and storage location be determined automatically in PO

Hi,
In ME21n, I have entered Vendor, Material and Qty; also the info record is maintained. Now if I save the PO, the plant and Sloc should be auto determined. Where will I have to maintain this information.
In master data the net SLOC for EP is maintained in MRP view.
The SLoc value is getting populated if I enter the Plant.
But I want that the Plant should also be auto populated. Please provide a solution.
Thanks and Regards,
Yogesh Walke

Hi,
You can create a Transaction Variant for creation of purchase order with your favorable plant.
Use T.Code :SHD0,enter the T. Code: ME21N and enter in Transaction Variant: ZME21N and later
confirm screen entry with your favorable plant to proceed further.
Now create purchase order with ZME21N and find your your favorable plant
Refer how to create Transaction Variant
How to Create a Transaction Variant
Transaction Variant - A Step by Step Guide for Creation - Code Gallery - SCN Wiki
Regards,
Biju K

Materials with multiple plants and wm views

Hello,
we are migrating materials to an environment where we have multiple plants, sales org., warehouse numbers. When we create the WM view we set a plant and warehouse number. As WM view is not really connected to a plant (table MLGN) we have the problem that when the users wish to mantain a material WM view, they see different combinations of plants and warehouse numbers, what is not really correct, as they are in different countries.
Country 1: plant 0001, warehouse number 001
Country 2: plant 0002, warehouse number 002
Country 3: plant 0003, warehouse number 003
In country 1, with MM02, the user can open the material in plant 0001 and in any warehouse, ie. 001, 002, 003. This user should only be able to open plant 0001, warehouse nr. 001.
Is there a way in customizing, authorizations, etc. to avoid this?
Thanks for your comments.

Hi
THis can be contolled via authorisation to the users. Please check with Basis consultant.
[http://help.sap.com/saphelp_45b/helpdata/en/91/1a39516e36d1118b3f0060b03ca329/content.htm]
Karthik
Edited by: Karthik on Jun 29, 2011 5:59 PM

Need smtp user id and password for mac os..so I can scan to fax with HP laser jet Pro 200 m276

I'm tring to setup my HP laserjet Pro 200 Color Mfp M276nw to Scan to fax. I'm being promted to give the SMTP user id and password. I'm usin mac os 10.7.5 Can anyone help me out with this issue? I called yahoo twice. They never return calls as promised. Thanks, Darrell

Hi nofear68,
I understand you've been unable to get the information needed to use the scan to fax feature on your HP laserjet Pro 200 Color Mfp M276nw. If you're using 'Yahoo' as your mail provider, I recommend using the following settings:
SMTP server address: smtp.mail.yahoo.com
User name: Your full Yahoo Mail email address (including "@yahoo.com")
Password: Your Yahoo Mail password
Port: 465
TLS/SSL required: yes
Let me know if this resolves the issue.
Thank you,
I worked on behalf of HP.

Plant and Storage Location determination at Item level during Copy control

Hello Freinds,
We are experiencing issues within Sales Order creation when the line item is referencing a contract. The plant and storage location is being determined from the contract - this should not be done, we have an enhancement in place for sales order plant/storage location determination which is how these values should be determined.
Kindly suggest, if it can be achieved through configuration setting at Copy control level, to avoid the Plant and Storage location determination from Contract in to Sales Order.
Thanks,
Anup Bansal

Hello
You can mention the additional logic of redetermining Plant and storage location whenever copied from contract.
In a sale order, i think you are maintaining a enhancement in prog MV45AFZB & user exit userexit_source_determination.
YOu can maintain the coding at same place.
thank you
Anirudh

Database table/FM to find relation between plant and company code in SRM

Hi,
I have a requirement where I need to determine the relation between the plant and company code in SRM.
The plant and company code both belong to R/3. We are replicating the plant by using the report BBP_LOCATIONS_GET_ALL.
This plant is now available as a BP in SRM. But from which SRM table or using which SRM FM can I get the relation between this and the company code?
Thanks,
Srivatsan

Hi
Check table BBP_LOCMAP. (Plants) - Manage Table Business Partner > System > Location
BBP_COMPCODE_FAV User-Specific Favorites for Permitted Company code.
Hope this will help.
Please reward suitable points, incase it suits your requirements.
Regards
- Atul

Validation on PLant and profit center for Material

Hi gurus
please advise on validation.
On FB50 transaction, Our users want a validation for particular accts say (GL: No 999888)
that if a material is entered in FB50, a plant and profit center must also be entered AND the entered plant and profit center should be the one from the material master MM03.
Please advise steps as how to build validation for the above requirement.
Many thanks in advance

Hi
You should never post any entry to a material account from FB50. FB50 is a purely FI transaction, and the Inventory accounts get hit automatically by various MM transactions. If you will post an entry from FB50 to a material account, there will always be inconsistency between FI & MM records.
regards
Parag Bhargava

Down payment for asset plant and machinery

Dear Experts,
Can any body help me,   i have one issue user posted one asset po , in po asset is assigned,    now they are posting to that po some advance through f-48,   my asset class is plant and machinery, with No AUC option ,   this advance amount is posting to asset also and caluting deprection,   it should not post to asset and calculate depreciation.
regards
chandu

Dear AP,
thanks for your reply, my p.o account assignment is asset "A".   i need to track the down payament in P.O history.
In t.code F-48 second screen p.o reference we are giving automatically what we asset no. assing in p.o that is displaying.   If i revome also again it is coming and posting to asset and caluclting depreciation.   please suggest without post asset how to do the down payment for asset p.o.
please suggest
Regards
Chandu.

Delivery Plant and Engineering Change no in BAPI_SALESORDER_CREATEFROMDAT2

Hi Gurus,
My requirement is creating sales order useing BAPI_SALESORDER_CREATEFROMDAT2,
but iam unable to find out Delivery Plant and Engineering Change no. in this BAPI.Plese Help me,
Regards
Srinivas

We use Delivery plant as Shipping point ,it is VBAP-VSTEL Field,you can see Sales order Shipping tab at item level.
Check the sales order level,if coding is good then there may be some user exit to stopping the data .
also check with functional guy to confirm the delivery plant field.
BAPI Structure is
BAPISDITM-SHIP_POINT
Thanks
Seshu

During MRP run unwanted plant and storage location include and exclude

Hi There,
During MRP run how to include and exclude the unwanted plant and storage location pls let me know the required configuration settings.
Thanks in advance.

HI,
To control whether a particular storage location will be included or excluded from the MRP run. (MD02/MD41).
To exclude it from MRP run :-
OMIR - Define storage location MRP per plant
Put the MRP ind. as.         1 - storage location stock excluded for MRP
To include it from MRP run:-
OMIR - Define storage location MRP per plant
Put the MRP ind. as.      space - storage location stock also planned at plant level and save it
Next go to transaction MM01 - tick only view MRP 2
Key in Plant and Storage Location
Look at the Storage Location MRP section
change the SLoc MRP indicator to space and save it
MMD1 - Create MRP Profile - MRP profile is a useful entry aid and makes it easier to manage MRP data.
You define which fields are filled with values when MRP data is entered in the material master record, which of these values can be overwritten and which not.   You use the information stored in a profile is standard information that is needed again and again in similar constellations when material master records are maintained.
Regards
KK

AUDIT action (create, delete, privilege escalation, set and change password from users account and group) users and admins in Solaris 10

Hello.
in Solaris 10 i need auditing process create, delete, privilege escalation, set and change password and etc... from users account and group.
I set settings:
in file syslog.conf:
*.info;mail.none;cron.none;audit.notice            @IP-Remote-syslog-server-SIEM
in file   /etc/security/audit_control:
dir:/var/audit
flags:lo,ad,ex,cc,am,no,fc,fd
minfree:20
naflags:lo
plugin:name=audit_syslog.so;p_flags=lo,ad,ex,cc,am,no
in file   /etc/security/audit_user:
root:lo,ad:no
Now I see in the logs only the fact of a connection via SSH and run processes on behalf of users. Creation. delete users, change passwords for some reason do not is logged.
Many users. For each individual write permissions in the file /etc/security/audit_user not possible, it is likely to forget any new user (or there is a possibility in this file one line to describe the audits for all accounts?)
Where is the mistake?

You are most likely hitting Bug 15779000 user/role/groupadd/mod/del don't audit their use.
And the fix is only available in S11.2.
-- Renaud

Need to add Plant and CostCenter as Selection fileds of CJI3 Initial screen

Hello Team,
Can you suggest me OSS note or User exit to add Plant and CostCnters as selection criteria for CJI3 Actual cost line Items report.
Thanks in advance,
Best regards,
Harish.P

Harisha
I agree with above reply but your requirement sounds a bit weird.
Note sure if cost element reports are any useful for your requirement.
Look (refer note) at the report painter option ( but you might still need to enter the Project/WBS)
Note 668513 - FAQ 2: Cost element reports in Project System
Regards
Sreenivas

User Authorizations and security

Hi,
 I need to know that , is it required to give SAP_ALL to functional consultants and ABAP developers user id created , or there are some different set of roles to be created. where do I find these security best practices , so that I can implement them.
Regards
Puneet

Sathi,
Yes, you can in fact do this...it is a fairly involved process but once done it works very well.
Remove ALL authorization objects pertaining to BUKRS (in this particular example you only want to limit users to a company code) from your role. We'll call this first role ZT_role. You will have your transaction codes in here.
You will have a number of other authorization objects that you could do this same thing with. We are currently not only doing this with company code, but cost center/profit center, plant and several more. The process is the same. If you don't want to allow certain users access to a company code, plant...etc. pull the auth obj out of the transaction role.
Next, create a brand new role WITHOUT T-CODES in it and name it something like ZD_Locking_role (whatever you want to call it...but in a sense you are locking users down with this role).
In this 2nd role you will need to manually enter each Authorization Object that uses BUKRS from your 1st role and then add in the company code(s) you want to allow people to see (again...manually add those auth objects needed as mentioned above for cost center/plant etc.).
Now, you shoudl be able to assign the 1st AND 2nd role to a person. Now, they will will only be able to see the company codes you placed in the locking role.
If you only assign the 1st role, they will not be able to view/change by company codes. By adding the second role, the SAP system checks the auth object against their entire profile in their master record and should allow them work fine.
Good luck!
For those that care...
We not only do the above, we took it many steps further. We created derived roles broke those down to display only and create/change roles. In other words, the locking role would read something like Z_DISPLAY_XXX or Z_CRT_CHG_XXX (where XXX is the company).
User roles assigned to associate Joe Smith - As an AR Manager this person needs access to ALL AR function for creation/display and change but only allowed to display all AP documents and not change all within company code XXX:
 Transaction roles:
ZT_AP_DISPLAY role (AP needs to run XK03 or XK04...any and all t-codes are locked down to display only! [03 or 08...etc.])
ZT_AR_MANAGER role (AR Manager needs to display (only) AP stuff but not be able to change. They also need to be able to perform all other functions (create/change) as an AR Manager)
 Locking Roles:
ZD_DIS_BUK_XXX (XXX is company code) [display only]
ZD_CRT_CHG_BUK_XXX (XXX is company code) [create change]
With a thoroughly thought out system you can have a very sight system while being able to allow user the versatility to see only certain information.
Good luck!

Creating material in multiple plants and storage locations

Hi Gurus,
I am wondering if someone could help me out in this issue,
I frequently get 1's and 2 materials creation requirement , is there any simple way , while creating material in MM01 , I could create/extend to all plants and storage locations.
I know we can use LSMW , but this is not bulk requirement,it is frequent but in 1or 2 nos.
Any help highly appriciated and rewared.
Thanks.

Hi,
To my knowledge I doubt if both MM17 & MM50 can meet your need, as MM17 is to mass change the values already existing in the MMR, while MM50 is to extend the views in a given plant & not to extend across plants.
A suggestion would be to use the BAPI's -
BAPI_MATERIAL_SAVEDATA Create and Change Material Master Data
BAPI_MATERIAL_SAVEREPLICA BAPI for Mass Maintenance of Material Data
Give your requirement to your abaper & inform him / her to use the above BAPI's. I am sure your abaper can write a simple & user friendly program to meet your exact need.
Regards,
Vivek

ON BEHALF USER PLANT AND SLOC?

Similar Messages

Maybe you are looking for