"On" button works intermittently

I have to press the "On" button located at the top right of the screen on my HP Split several time before I get a response. It will eventually work, but sometimes I have to press it five or six times. It doesn't seem to make a difference whether I'm plugged in or on battery. It SEEMS to work better when the screen is disengaged from the keyboard, but that might just be coincidence. I've owned the product for about 6 months. Thanks for any help you can offer!

According to the message you have recently posted I would like to confirm that this could be a hardware issue and the power button board needs to be replaced. I strongly recommend you to immediately Contact HP Technical Support over the Phone for further assistance to get your Notebook diagnosed and serviced by an authorized HP Certified Engineer You can also Check your warranty Here to verify the warranty status Hope this helps, for any further queries reply to the post and feel free to join us again **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,K N R KAlthough I am an HP employee, I am speaking for myself and not for HP

Similar Messages

IPhone 4 power on/off button working intermittently?

Hello everyone! My one and a half year old iphone 4 recently got dropped in the water recently for about a minute. ( I know, stupid stupid me!) I immediately panicked but noticed that nothing seemed to have happened at first glance. However, I immediately switched it off and dried it the best I could (including keeping it in rice). I switched it back on a day later and noticed that everything seems except for the power button and the speakers. Within a few hours, the speakers issue got resolved on its own and it started working alright. However, the power button seems to only work intermittently. For example, if I press it now, it locks the phine after fifteen minutes. Also, sometimes it locks by itself and shows the "slide to power off" slider screen, as if the phone thinks someone has been pressing the button continuously. I'm using assistive touch at the moment and tried to do a restore with iTunes but to no avail.
I was wondering if anyone had any tips to fix the button? Since my phone is out of warranty, how risky would it be to take it to a third party repair store because everything else is working fine and I don't really want a refurbished replacement?
Thanks in advance for any help, guys!

By using AssistiveTouch, you are pretty much doing all that you can, as this is a hardware problem with the button. I am afraid you will have to use it as is, or get a refurbished replacement for $149. If you are due for an upgrade with your carrier, you could actually get an 8GB iPhone 4 for free (if you sign a new 2-year contract), or even a 16GB iPhone 4S for $99.

Mighty Mouse buttons work intermittently

My Mightly Mouse's buttons now work only intermittently. Is this possibly a software issue or is it time to replace this 5 year old mouse?

Sorry for the duplicate post, I am on two different threads concerning this problem. I had contact with Apple Support through the complimentary support for purchasing Lion. They took note that the wired mighty mouse worked with my Macbook air running Lion 10.7.4, that my Wacom pen and tablet could be programmed to right click on my Macpro running 10.7.5 from the App store but seemed stuck on the requirement for a clean install even though I related clean installs from this discussion forum have not worked.
Out of curiousity I tried the USB Overdrive shareware:
http://www.senlick.com/html/01.01.html
My wired USB mighty mouse now works with Lion as it did with Snow Leopard, again to me this points to the release of Lion on the app store.
I am going to write the Apple support case handler again and let her know, I have not heard back from them since November 1, hopefully they are working on the problem.
Dave

My home button is working intermittantly. Have Restored setting. still problem. Any ideas?

my home button is working intermittantly. Have Restored setting. still problem. Any ideas?

Did you actually restore the iPad? Or just restore settings?
If you haven't "restored" the iPad...
iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software
If a restore doesn't work... > Apple - Support - iPad - Hardware Service

Button lights work intermittently

Button lights on bottom of Droid X Motorola only work intermittently. Phone is 10 months old. Is there a quick fix?
Redrider

Thanks I think that may have fixed it. It is not a hard case but a slip in leather with a magnet which also causes the car dock to come on sometimes but did not think about the lights. Thanks for replying.

Hyperlinks to XLS, DOC, and PDF files that are included in a .chm file work intermittently.

SUMMARY
Hyperlinks to XLS, DOC, and PDF files that are included in a
.chm file (and the Baggage Files) only work intermittently. The
only solution appears to be deleting the Temporary Internet Files.
PROBLEM
1. I place the XLS, DOC, or PDF file in the Windows
sub-directory that corresponds to the RoboHelp project sub-folder
where the topic in which I’ll place the hyperlink exists.
2. I open the help project in RoboHelp HTML.
3. I right-click on the project’s Baggage Files
sub-folder that corresponds to the Windows sub-directory in which I
placed the XLS, DOC, or PDF file (in step 1).
4. I import the XLS, DOC, or PDF file.
5. I open the topic in which I’m going to place the
hyperlink in the WYSIWYG editor.
6. I “drag and drop” the Baggage File into the
topic (in the WYSIWYG editor) to create a link to it.
7. I save the changes and then generate HTML (.chm) help.
8. I open the .chm file and click the hyperlink. The XLS,
DOC, or PDF file may or may not open.
9. When the hyperlink works correctly, for DOC and XLS files,
a “File Download – Security Warning” dialog box
appears asking, “Do you want to open or save this
file?”. The buttons that are available are
“Open”, “Save”, and “Cancel”.
These buttons work then as one would expect. (When the hyperlink
works correctly for a PDF file, it simply opens the PDF file in a
new window; there’s no prompt to save, open, or cancel.)
10. When a hyperlink does NOT work, for DOC, XLS, and PDF
files, no dialog box or other visual message is displayed. Instead,
the sound that is associated with the “Exclamation”
program event is played (the “Windows XP
Exclamation.wav” file is the WinXP default).
Other Notes:
- The hyperlinks ALWAYS work when I view a topic using the
“View Selected Item” function (Ctrl+W) in the RoboHelp
HTML project.
- Once a hyperlink stops working, it will not start working
again until I delete all the Temporary Internet Files.
- A hyperlink will stop working even if Internet Explorer
(iexplore.exe) is closed the entire time.
WORKAROUND
Through trial and error, I have discovered that if a
hyperlink stops working, I can get it to work again using the
following steps:
1. Leave the .chm file open.
2. Open Internet Explorer.
3. Click Tools>Internet Options….
4. From the “Internet Options” dialog box, select
the “General” tab.
5. Under the “Temporary Internet Files” section,
click the “Delete Files…” button.
6. From the “Delete Files” dialog box, select
“Delete all offline content” and then click
“OK”. The files are deleted and the “Delete
Files” dialog box closes.
7. Click “OK” to close the “Internet
Options” dialog box.
8. Without closing Internet Explorer and without re-starting
the .chm file, all the hyperlinks that didn’t work before
will now work.
GENERAL SYSTEM INFORMATION
- Windows XP Pro, SP2
- Internet Explorer 6.0.2900.2180
- RoboHelp X5, 5.0.2 Build 801
- HTML (.chm) help project files exist on my local machine
- HTML (.chm) help file is run from my local machine
- Project is under RoboSource version control
TEMPORARY INTERNET SETTINGS
- “Check for newer versions of stored pages” is
set to “Automatically”
- “Current location” for the Temporary Internet
files folder is set to “C:\Documents and Settings\My
Username\Local Settings\Temporary Internet Files\”
- “Amount of disk space to use” is set to
“594” MB
“View Files…”
- An XLS or DOC file will be listed here if I click its
hyperlink and then click either “Open” or
“Save” from the “File Download – Security
Warning” dialog box.
- A file will appear here even if I click “Save”
and then click “Cancel” from the subsequent “Save
As” dialog box.
- If I click “Cancel” from the “File
Download – Security Warning” dialog box, the file does
not appear in the Temporary Internet Files folder.
- When a file does appear in the Temporary Internet Files
folder, its Internet Address is displayed similar to the following:
“ms-its:C:\PrimaryProjectFolder\ProjectName.chm::/SubFolderName/FileName.xls”
“View Objects…”
Here’s a list of all the program files that appear:
- “Microsoft Office Template and Media Control”
(Last Accessed 12/13/06) (Version 12,0,6024,0)
- “Shockwave ActiveX Control” (Last Accessed
12/14/06) (Version 10,1,4,20)
- “Shockwave Flash Object” (Last Accessed
12/18/06) (Version 9,0,28,0)
- “Windows Genuine Advantage Validation Tool”
(Last Accessed 12/14/06) (Version 1,5,722,0)
- “WUWebControl Class” (Last Accessed 12/13/06)
(Version 5,8,0,2469)
Today is 12/18/06 so the only program file that is listed as
having been “Last Accessed” today is the
“Shockwave Flash Object”.
REQUEST FOR HELP
I really want to include certain PDF, DOC, and XLS files in
their native format in a .chm file. However, I need a better
solution to my problem than the one I discovered. What I really
want is to avoid the entire problem altogether.
Have anyone seen this before or have any suggestions?

You wont be able to do that. The embedded objects would appear as images only.

Menu button works on pc but not on tablet and mobile

Hi! I've made a desktop site and I've published it. Everything works on a pc browser but into tablet and mobile, there is a button on a menu that doesn't work..the link to the rest of the site doesn't start. Maybe because that link goes to a part of the site that is too heavy (the structure under that button goes to 30 different pages)?

This is the url:
http://www.babylove2000.com/
If you try to visit the site by tablet or mobile, you cannot enter in the section 'MARCHI' trough the correspective button. The other buttons work correctly.
Thanks,
Marianna

I updated to new 3.6.6 version now my browser does not work at all just gives me an untitled tab. neither bookmarks or google button work .

Updated to new version 3.6.6 now browswer doesn't work. Just gives me a untitled tab. Bookmarks nor google button work either.
== This happened ==
Every time Firefox opened
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; StarBand Version 4.0.0.2; SearchToolbar 1.1; .NET CLR 2.0.50727; StarBand Version 4.0.0.2; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; StarBand Version 4.0.0.2)

On my previous post I said:
"When upgraded to FF 3.6.6, due to Norton 360 v.4, everything froze.
My solution was to downgrade to FF 3.6.4, because with that version i had no problems, and now again everything works fine.
Not the best solution but it is better than downgrading to FF 3.5.x as I saw many users did."
Now I want to add that, after running FF 3.6.4 for 3 days, i got again the security warning to upgrade to FF 3.6.6, so I did.
Now am running FF 3.6.6, and even with Norton, everything works fine, no bugging, freezing, refreshing, blank pages...
I can't figure out why the problem still persist for other users. Now maybe it is not due to Norton any more?

USB Ports work Intermittantly on Pavilion Notebook

I have a HP Pavilion dv7-2270us Entertainment Notebook PC that is running Windows 7. The USB ports seem to work intermittantly. There are two regular USB ports on the left hand side and one on the right. I have an iPhone, Adidas miCoach, and wireless mouse that I usually have plugged in, and lately nothing is recognized.
Sometimes I get an error that the USB device is not recognized, sometimes I get nothing at all as though the ports aren't even there.
I have tried taking out the battery, replacing and rebooting. I have also tried uninstalling the USB Root Hub, and then the Root Hub plus controllers. When I did this it seemed like it worked - I plugged my mouse in and it worked! I plugged my iPhone in and now nothing works again.
I have Norton 360 Installed (in case that is an issue), and I also have some old Sony Ericksson software that I've recently uninstalled because someone told me that it wreaked havoc on their machine in terms of their device drivers.
The laptop is just out of warranty (Dec 2010) so this is a relatively new machine. But I love all my gadgets and need to be able to use them all!

Right Click on all devices which are recognized as unknown and Choose Uninstall one by one.
Please ensure you also do this for any and every item under Universal serial bus controllers as well. After this restart your computer and you should be good to go.
//Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
I am an HP employee!!

How do I make a submit button work on a mobile oriented page?

How do I make a submit button work on a mobile oriented page? I have the .html file and the .data file (and one other kind), but it just spins and spins and spins when I try to send the form in (for an absence). I'd like it to work on all devices. Help?

HTML forms don't do anything. You need a form processing script to gather and process form data. Which server-side scripts does your web hosting plan support -- php, asp, asp.net, perl? This will determine which scripts you can use with your form.
Nancy O.

Why doesn't the "back" button work all the time in Safari?

Why doesn't the "back" button work all the time in Safari?

thanks for the reply. You prompted me to check and I realised it wasn't installed on my test laptop and opening in Microsoft Reader. I've installed it now and it works.
My next challenge is to prevent the mailto: command opening Microsoft Mail instead of Outlook, but I guess every user will have a different default.
Thank you

How can I get ThinkVantage button working again? (after a full HD rebuild)

WindowsXP Pro, ThinkPad T60 (2007-F4G / UT0F4UK)
Hi
How do I get my Thinkvantage button working again?
Background:
I had a virus attack and as a precaution I zero-ed my ENTIRE hard disk (using KillDisk). I have managed to re-install most things, including I now have an icon on the taskbar called "Launch Lenovo ThinkVantage Toolbox". However I would prefer it to be fired up by my pressing the (blue) ThinkVantage button at the top of my keyboard.
I have refused point blank to pay the (outrageous) price of GBP 40.00 for Lenovo to send me a CD with Windows etc on it, but have managed (eventually) to rebuild the entire disk driver by driver until the ThinkVantage Toolbox thing (version 6.0.5449.31) could take over and bring my drivers up to date when I Update my system.
(It's just that they may have gone in incorrectly??)
Is there something I should have done during installation.
Ship

Hi Ship,
1. Install these for thinkvantage button:-
http://www-307.ibm.com/pc/support/site.wss/MIGR-62850.html
http://www-307.ibm.com/pc/support/site.wss/MIGR-68000.html
Hope it helps.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

How to make buttons work in Interactive Adobe Forms

Hi Experts,
I am new to interactive form. Though i have worked in normal/non-Interactive form, i do not know how to make buttons work in interactive adobe forms using ABAP (I don't know JAVA). Can any one help me out and walk me through to how to code in ABAP to make buttons work.
Kind Regards,
Sharat.

Please refer to my earlier post ... You will get an idea
Please refer to the below thread for detail solution
Sample Interactive form example ?....urgent...
Cheers
Satya

When I try to use the Submit Form button on the Interactive PDF I created (IN Design CS6) I get this message. "There is no value in form field 'Program.' Please put in it before proceeding. What can I do to fix this and make the Submit button work?

When I try to use the Submit Form button on the Interactive PDF I created (In Design CS6), I get this message:
There is no value in form field "Program." Please put in it before proceeding.
How can I fix this and make the Submit Form button work?

Are you running modified software on your phone? This error seems to be common if the firmware has been modified and you're trying to restore the phone again.

Whenever I open the editor in Photoshop Elements 12 it does not work. When I try to click open in the application it does not do anything. None of the buttons work. When I open a photo using file at the top it opens but I cannot edit it or use any of the

Whenever I open the editor in Photoshop Elements 12 it does not work. When I try to click open in the application it does not do anything. None of the buttons work. When I open a photo using file at the top it opens but I cannot edit it or use any of the features on the left side.

Hi Nealeh
Thanks i think I got it working of a fashion.
Except the replace colour, does not seem to end up with the colour I picked using the picker tool. Its as though it hads not replaced the colour but blended in the desired colour with the old incorrect colour!
Buy trial and error picking not the right colour but close - which when mixed with the existing colour is close.
Sorry I can't post the pictures as the Lingerie Mfg, has me under non disclosure.
The scenario is:- say a blonded mainly tanned model a high cut [at the hips] corsette style basque, with an ultra low bra line.
Our dear model, has just come back from St Barts with a fabulous Tan, and equally striking bold Tan lines!.
So we have great tanned legs, then the 'porcelain white band' where her swimsuit was.
Likewise we have a tanned face, and arms, shoulders etc and a great tan on the top of the cleavage, then it stops, white band to the top of the ultralow cut bra line of the basque.
She must have lived in like the most conservative bikini on the planet [50's style], for 2 weeks!
Had she had a normal skimpy bikini on, no problem!
If i don't solve it, she will get fired!
Not a lack of interest in your post, but I was out, and tried to log in to this site; which I could do, on my iPad Air / 5 [whatever its the new one]. And tried to 'sign in' - but it just hung at the
"Join Adobe Community" adobe sign in splash screen! with he little whell spinning around continuously!!!
I have Safari on this iPad. Guess that is all it runs.
So technology is not my friend today!

"On" button works intermittently

Similar Messages

Maybe you are looking for