On campus services SAP products

Hi SAP gurus,
There are some services stated In the Solution map for Higher Education such as Traffic and Parking Services, Culture Services etc. As we understand, SAP product available for these services however we could not found which SAP product is used for these services.
Could you please help us for these services, which SAP product should we use?
Student Card Management
University Activities and Events
Traffic and Parking Services
Recreation Services
Banking Services
Culture Services
Health Services
Athletics Services
Security Services
Club And Organization
Students Feedback
On campus Analysis
On campus service reporting

Hi Tina,
in the solution composer the icon in front of services says
o SAP Product Available
if a service is offered by a third party partner product there is an icon stating
(P) Partner Product Available (what i have understood from your message)
so the solution composer should be updated for these online campus services.

Similar Messages

How do I know if I can install a JAVA component on a SAP product ?

Dear SAP,
I have a generic question.
I need to know if a JAVA Component can be installed in a system.
Let's take an example :
==> There is EP Core Java Component.
==> My question : May I install this JAVA Software Component EP Core in a SAP SRM 7.0 / NW 7.01 system ?
I know there is http://service.sap.com/scl link which explain the content of each SAP Product and SAP Software Component.
But how do I know if a specifif JAVA Component (example EP Core, SAP MDM Server, ...) can be installed on each SAP AS-JAVA ?
Best regards
CP2009

Dear CP2009
This information is stated in guides but a quick trick can be the following
Go to [https://service.sap.com/sp-stacks] and click on "sp stack download" in the left pane menu.
Then select your product version on right pane for example SP Stack SAP SRM 7.0
This will open a popup window
Fill in start stack and target stack (can be whatever in this case, it's just to check what usage types are available)
On one of the next screen you will have to choose which usage types are installed.
From that screen I can derive that for product "Portal Content SRM" or "SRM Supplier Java" you need component EP Core.
Kind regards
Tom

Multiple SAP products on a single server

Is it possible to install ERP 2005, BW, CRM, SSM and EP on a single server without virtualization? This is only intended for non-productive instances (DEV & QA)
I would also like to know if SAP has any information on this?
Thank you
Aubrey

Welcome to SDN Aubrey,
It is possible to do this assuming all the applications versions support the same DBs. You will have to size the server additively - you don't really save a CPU, memory, or Disk.
You have 2 options here:
MCOD: All the applications share the same DB but are separate applications with SIDs. Note that all applications must support the same release of your DB.
Separate DBs: All applications have separate DBs (assuming your OS/DB supports multiple installations).
There is a lot of good information in the master guides (SAP NetWeaver, mySAP ERP, and mySAP CRM). I'm not sure what SSM is?
http://service.sap.com/instguides
I hope this helps,
Mike.

SAP Product and Portfolio Management Upgrade(PPM)

HI Everyone, A warm reagrds! W e are planning to upgrade our current SAP Product and Portfolio Management 4.0 to 5.0.While doing the Upgrade analysis I have come across below these questions..Has anyone earlier in this forum have come across
1.What are the side effects of this upgrade on existing system?
2. We have 21 client environment on top of the 3 standard clients provided by SAP. What can be the best approach for upgrading the systems? Some of these clients are used by project teams for prototype development , how would the upgrade affect their working (they are not working on this package)?
3. Our team is working on this package in one of the client and have created scenarios in the system. What will be the effect of this upgrade ? (this question can be seen as an extension to question 1)
4. How much effort would be required to carry out this upgrade and what will be the down time for the system?
I have check the service market place and help.sap but at present not getting much info..
Thanks for your time to read.. Please help!1

Hi,
it is an own separate NW AddOn, see SAP Note 1377104 (FAQs - SAP Portfolio and Project Management 5.0).
Kind regards,
Florian

Installation of SAP Productivity PAK - Installation Guide

Hi Everybody,
We need to install SAP Productivity PAK . I am looking for more information on this in terms of Installation guide, pre-requisites, installation steps and configuration steps. I would appreciate if any of our members help me by sharing the relevant documents. Please share/send me the required info.
Regards,
AmKo

Hi AmKo,
Have you SAP Productivity PAK already downloaded from the SMP?
If so, then please have a look at this KBA.
[1600355|http://service.sap.com/sap/support/notes/1600355]- Installation files for SAP PRODUCTIVITY PAK 4.3
Let me know if this helps,
Kind Regards,
Matthew

BO Integration Kit for SAP Product Trial Product key

Hi Everyone,
I have downloaded BO Integration Kit for SAP Product Trial but the product key mentioned on the website does not work..It says "expired"
Can anyone please tell me where can I get it the current Product key from.
As of now I don't have service market place id so cannot download the Product Key file from there.
Regards

Hi,
trial keycodes can be downloaded from here:
http://service.sap.com/licensekeys
Ingo

Which SAP products require Netweaver and which do not

Hello, does anyone have slides or a link that shows which SAP products run on Netweaver? For example, some Sybase solutions do not run on NW but I'm not sure which may and which may not. Things like Aleri and probably some other components don't require NW. How about Business Objects, does that require NW or run on NW. A nice diagram showing what were would be great.
SAP Event Insight is shown as one server but I know Sybase CEP (Aleri) is part of it, so, I believe that one server can be solely NW.
Thx

HI
You may find following links useful:
[https://service.sap.com/pam|https://service.sap.com/pam]
[https://service.sap.com/roadmap|https://service.sap.com/roadmap]
[https://service.sap.com/releasestrategy|https://service.sap.com/releasestrategy]

SAP Productivity Pak for Us customer

Hello Experts,
We have a requirement from client to install the RWD productivity pak for training documents and I have heard this name first time and I already instaalled the Solman 7.1 and Dev box of CRM 7 EHP 1 and ECC EHP 5. I have below queries-
1) Is basis responsible to install RWD Productivity pak.
2) Do we need to install this software on each users machine or we need to install it on our ecc/solman/crm servers on each box (DEV,QAS, PRD).
3) What are the installation steps and the prerequisites.
4) Do we require extra hardware ? with some environment and if we require to integrate it with SAP with steps or guide.
5) I checked it on service mkt place and version 4.3 and 4.4 is avl so which version should i prefer.
Regards
Saurabh Mishra

sorry, too busy with messages these days.
RWDuPerfServer43P_1-10009622.ZIP
RWDuPerfServer43P_2-10009622.ZIP
These are patch but not the installation file.
For installation, goto:
-> Service.sap.com/swdc
-> Installations and Upgrades
-> Browse our Download Catalog
-> SAP Education Products
-> SAP PRODUCTIVITY PAK BY Ancile
-> SAP PRODUCTIVITY PAK 4.3 (or 4.4)
-> Installation
-> Downloads
-> Product ID Application Instruction SAP Productivity Pak
- Can we install database , application and search index on same machine ?
Yes
- OS is windows (2003, 2008, Win 7, Vista or XP ???), Is RWD only supported on 32 bit windows with IA processor or any processor ?
64 bit can also be supported but Ancile programs are written for 32 bit. it can work with 64 but still on 32 bit mode.
- Where can I find the installation document or all the prerequistes ?
after extracting the packages downloaded from SMP, you will get the administration guide, which includes the installation guide.
- Which database is preferable SQL, oracle or DB2 , currently we have SAP system on DB2
emmm... SQL is simple to use. xxx doesn't like oracle. no idea for DB2....
- Do we need to integrate the RWD with all SAP system landscapes ?
If you want to use Help LaunchPad for All the SAP systems, you will need to import the HLP addon to each of the system (ABAP side).
- Also suggest the hardware requirement (RAMprocessorhard disk space) if 1 server installation is possible for all the req (Search Server + Database Server + Web Application Server + Administrator Workbench)
Not much idea for sizing. depends on the workload...

1614057 Details of SAP PRODUCTIVITY PAK 4.32

This new note has just been created which contains SAPMats link to SPP 4.32 Server and Client.
It should be up on the SMP shortly, until then use the SAPMats.
[1614057|http://service.sap.com/sap/support/notes/1614057] Details of SAP PRODUCTIVITY PAK 4.32

Hi Manfred,
Please note that we now have a new forum created for SAP Productivity Pack.
The link is SAP Productivity Pak / SAP Productivity Composer by ANCILE
Hope this helps,
Kind Regards,
Matthew

BPC link with any other SAP products?

Hi, Prakash
I am wondering how BPC communicate with any other SAP products? using RFC? Can we load the data from ECC into BPC?
Thanks
C.S.

Hi Chimei,
We are currently going to kickstart our BPC project.
We went through the process of evaluating products which can help easy extraction of data from SAP products into Outlooksoft.
There is a company called ERPLink which has a product suite called iNet.BI which helps enable this. It is very inexpensive (17K for software with 17% annual maintenance charges). This product is SAP certified and has ability to read metadata from SAP modules. It can extract data from BW environments (Cubes, queries of ODS objects) and from R/3 environments (via ABAP report programs with their embedded macros & direct table views). From the product demo, the user interface seemed simplistic. The product is installed on the Outlooksoft environment and uses SQL*Server Information Services (DTS packages) to do the load from SAP source system to Outlooksoft.
You might want to consider this product as an alternative to Flat File loads.
Hope this helps.
Regards,
Abhay Shanbhag

Migrating SAP products from a non-SQL Server platform to a SQL Server 2005

Hi,
I have another question too.
Can someone pls provide me the Considerations for Migrating SAP products from a non-SQL Server platform to a SQL Server 2005 platform?
More specifically from Oracle to SQL 2005.
Regards
Abhi

Hello
You need to perform an OSDB migration.
This will involve exporting your SAP system into a DB neutral format and then reloading this into an SQL 2005 SAP system.
Please review http://service.sap.com/osdbmigration
I recommend you review the homo/heterogeneous system copy guide for your SAP release.
Thanks
N.P.C

Where to find Installation Guide for SAP Productivity Pak 4.3

We are in the process of installing Productivity Pak 4.3 for a new client. There is no installation guide for 4.3 in English. When I go to the link for the 4.1 installation guide, it is no longer available through that link.
Can anyone point me to the installation guide in English?
Thanks in advance,
Joe
UPDATE: I found the 4.1 administration guide (https://websmp204.sap-ag.de/~sapdownload/002007974700000806942010E/RWDAdmin_41en.pdf). Looks like 4.3 EN is not available yet.
Edited by: Belluso Joseph on Aug 10, 2011 6:09 PM

Hi Belluso,
Glad you could find it.
Just an FYI for everyone else.
[1600355|http://service.sap.com/sap/support/notes/1600355] - Installation files for SAP PRODUCTIVITY PAK 4.3
Regards,
Matthew

Requirements for integration of XYZ Service - SAP.

Hi Team,
Appriciate any help on understanding the below requirement and how/where to start work in XI.
Requirements for integration of XYZ Service - SAP.
XYZ Service has CRM middle where and SAP ECC 6.0
XYZ Service Calls
=============
1. All the completed calls in XYZ Service has to go in SAP automatically for validation process.
2. All call details (parameters) has to come in sap from XYZ Service to SAP like..
     Field Name:
     =========
     Per No.
     official no.
     mohile no.
     Cust Name.
     Address.
     etc.
3. All the AMC generated in XYZ Service should replicate to SAP, with all the customers, AMC and product details.
Validation in SAP:
==============
4. In SAP we have to validate the calls according to below parameters.
    --> date of purchase : abc validation
    --> Serial No. :   Should be n fixed lenght with some format
    --> Part & Qty. : Same part should not have been consumed in last 30 days in same unit.
    -->
    -->
    etc.
Process in SAP
============
5. All the calls which carry the spare parts has to approve by the store person. He can approve/disapprove the call.
6. Call without spare part have to approve by system once validation process finish and it will considerin qlt report in sap.
7. If the store peroson disapproves tthe call it has to go back XYZ Service and reprocess again.
8. Prepare quality report for all the calls in SAP.
9. Consumption report has generate for each call wise.
10. Call wisw defective settlement( replenishment) in SAP and generate automatic loan settlement.
11. Franchisee bill claim to SAP.
12. ASC can change the disapproved calls and reprocess it again.
As for my understanding and discussions from the above requiremet,
Customer/franchisee/client....enters the request/data through the Web Application .
process from CRM and then to SAP ECC 6.0. after all the process complete details to be shown on Web Applications.
So here where exactly supposed ti implemet the XI system and little bit of confuse how and where to start from.
Please guide me to start the above mentioned and give me a break to learn and do lot of things in XI/PI.
Regards,
Ramana.

Thank you Gaurav.
However, as for my understanding...as the client using a legacy system for getting the information.
also The data is given on Web Application ( say via portal) and the data verified from CRM system and then processed via SAP ECC 6.0 giving the required information on the Wb Application to the client (Portal)
That means needto implement XI integration to show the complete required information on the web application.
Only this is I am not knowing how to frame this complete design and where and how exactly to stat.
Please correct me if I am wrong and if possible with the same relavent information.
Thank you for your valuable support.
Regards,
Venkat,

Two SAP production systems in a single physical server

Dear All,
Is SAP support installing two SAP production systems like SAP ECC 6.0 of one customer and ECC 6.0 with a different SID and instance no. for another customer in a single physical server? Would like to know from the experts is this possible? If yes , what are the things to take care of this design if any?
Thanks
Hany

Hi ,
check below blog
You can check the following blog https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/5124. [original link is broken]
It helps you to understand different logon pages for portal
Koti Reddy

SAP Product and REACH Compliance 2.0 dese not add-on in SAP ECC 6.0 EHP5

hi experts,
I upgraded ECC 6.0 EHP5 and then try to add-on SAP Product and REACH Compliance 2.0 in SAP ECC 6.0 EHP5.
I aleady knew REACH 2.0 is available with ERP 6.0 EHP5 through Note 1389561 - SAP PRC 2.0: Installation and upgrade for ERP 6.0 and SAP Note 1456663 - SAINT: Enhancement Package 5 components on NW 7.02.
But unfortunately, When I try to install REACH 2.0 using SAINT, The error message was pop-up
========================================================================
OCS package SAPK-360COINTDAGBCA does not match the current software component vector
========================================================================
any idea pleas...
For reference
==========================
tp version : 720 patch 90
R3trans version : 720 patch 89
SPAM/SAINT : 7.02/43
SAP_BASIS : 702 sp 07
SAP/EA_APPL : 605 sp 04
Thanks and regards,
Jun

Hi Jun,
You could check the upgrade logs and traces at the location ../usr/sap/<sid>/upg/abap/logs.
Check for the latest last changed logs. Mos probably a prerequisite package for the REACH 2.0 installation is not included in the upgrade. The detailed logs should mention which prerequisite is missing.
Fore reference see thread: EHP4 upgrade error on SAPK-603DHINEAPS
Regards,
Srikishan

On campus services SAP products

Similar Messages

Maybe you are looking for